In preparation of removing the historic icinode struct, move the projid
field into the containing xfs_inode structure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

The legacy DMAPI fields were never set by upstream Linux XFS, and have no
way to be read using the kernel APIs.  So instead of bloating the in-core
inode for them just copy them from the on-disk inode into the log when
logging the inode.  The only caveat is that we need to make sure to zero
the fields for newly read or deleted inodes, which is solved using a new
flag in the inode.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

Make sure di_flags2 is always initialized.  We currently get this implicitly
by clearing the dinode core on allocating the in-core inode, but that is
about to go away.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

Split looking up the dinode from xfs_imap_to_bp, which can be
significantly simplified as a result.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

s/sytemcall/syscall/
Signed-off-by: NBhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

When we allocate a new inode, we often need to add an attribute to
the inode as part of the create. This can happen as a result of
needing to add default ACLs or security labels before the inode is
made visible to userspace.

This is highly inefficient right now. We do the create transaction
to allocate the inode, then we do an "add attr fork" transaction to
modify the just created empty inode to set the inode fork offset to
allow attributes to be stored, then we go and do the attribute
creation.

This means 3 transactions instead of 1 to allocate an inode, and
this greatly increases the load on the CIL commit code, resulting in
excessive contention on the CIL spin locks and performance
degradation:

 18.99%  [kernel]                [k] __pv_queued_spin_lock_slowpath
  3.57%  [kernel]                [k] do_raw_spin_lock
  2.51%  [kernel]                [k] __raw_callee_save___pv_queued_spin_unlock
  2.48%  [kernel]                [k] memcpy
  2.34%  [kernel]                [k] xfs_log_commit_cil

The typical profile resulting from running fsmark on a selinux enabled
filesytem is adds this overhead to the create path:

  - 15.30% xfs_init_security
     - 15.23% security_inode_init_security
	- 13.05% xfs_initxattrs
	   - 12.94% xfs_attr_set
	      - 6.75% xfs_bmap_add_attrfork
		 - 5.51% xfs_trans_commit
		    - 5.48% __xfs_trans_commit
		       - 5.35% xfs_log_commit_cil
			  - 3.86% _raw_spin_lock
			     - do_raw_spin_lock
				  __pv_queued_spin_lock_slowpath
		 - 0.70% xfs_trans_alloc
		      0.52% xfs_trans_reserve
	      - 5.41% xfs_attr_set_args
		 - 5.39% xfs_attr_set_shortform.constprop.0
		    - 4.46% xfs_trans_commit
		       - 4.46% __xfs_trans_commit
			  - 4.33% xfs_log_commit_cil
			     - 2.74% _raw_spin_lock
				- do_raw_spin_lock
				     __pv_queued_spin_lock_slowpath
			       0.60% xfs_inode_item_format
		      0.90% xfs_attr_try_sf_addname
	- 1.99% selinux_inode_init_security
	   - 1.02% security_sid_to_context_force
	      - 1.00% security_sid_to_context_core
		 - 0.92% sidtab_entry_to_string
		    - 0.90% sidtab_sid2str_get
			 0.59% sidtab_sid2str_put.part.0
	   - 0.82% selinux_determine_inode_label
	      - 0.77% security_transition_sid
		   0.70% security_compute_sid.part.0

And fsmark creation rate performance drops by ~25%. The key point to
note here is that half the additional overhead comes from adding the
attribute fork to the newly created inode. That's crazy, considering
we can do this same thing at inode create time with a couple of
lines of code and no extra overhead.

So, if we know we are going to add an attribute immediately after
creating the inode, let's just initialise the attribute fork inside
the create transaction and chop that whole chunk of code out of
the create fast path. This completely removes the performance
drop caused by enabling SELinux, and the profile looks like:

     - 8.99% xfs_init_security
         - 9.00% security_inode_init_security
            - 6.43% xfs_initxattrs
               - 6.37% xfs_attr_set
                  - 5.45% xfs_attr_set_args
                     - 5.42% xfs_attr_set_shortform.constprop.0
                        - 4.51% xfs_trans_commit
                           - 4.54% __xfs_trans_commit
                              - 4.59% xfs_log_commit_cil
                                 - 2.67% _raw_spin_lock
                                    - 3.28% do_raw_spin_lock
                                         3.08% __pv_queued_spin_lock_slowpath
                                   0.66% xfs_inode_item_format
                        - 0.90% xfs_attr_try_sf_addname
                  - 0.60% xfs_trans_alloc
            - 2.35% selinux_inode_init_security
               - 1.25% security_sid_to_context_force
                  - 1.21% security_sid_to_context_core
                     - 1.19% sidtab_entry_to_string
                        - 1.20% sidtab_sid2str_get
                           - 0.86% sidtab_sid2str_put.part.0
                              - 0.62% _raw_spin_lock_irqsave
                                 - 0.77% do_raw_spin_lock
                                      __pv_queued_spin_lock_slowpath
               - 0.84% selinux_determine_inode_label
                  - 0.83% security_transition_sid
                       0.86% security_compute_sid.part.0

Which indicates the XFS overhead of creating the selinux xattr has
been halved. This doesn't fix the CIL lock contention problem, just
means it's not a limiting factor for this workload. Lock contention
in the security subsystems is going to be an issue soon, though...
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
[djwong: fix compilation error when CONFIG_SECURITY=n]
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NGao Xiang <hsiangkao@redhat.com>

Files containing metadata (quota records, rt bitmap and summary info)
are fully managed by the filesystem, which means that all resource
cleanup must be explicit, not automatic.  This means that they should
never be subjected automatic to post-eof truncation, nor should they be
freed automatically even if the link count drops to zero.

In other words, xfs_inactive() should leave these files alone.  Add the
necessary predicate functions to make this happen.  This adds a second
layer of prevention for the kinds of fs corruption that was fixed by
commit f4c32e87.  If we ever decide to support removing metadata
files, we should make all those metadata updates explicit.

Rearrange the order of #includes to fix compiler errors, since
xfs_mount.h is supposed to be included before xfs_inode.h

Followup-to: f4c32e87 ("xfs: fix realtime bitmap/summary file truncation when growing rt volume")
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Nowadays, we indirectly use the idmap-aware helper functions in the VFS
to set the initial uid and gid of a file being created.  Unfortunately,
we didn't convert the quota code, which means we attach the wrong dquots
to files created on an idmapped mount.

Fixes: f736d93d ("xfs: support idmapped mounts")
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NChristian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

For file creation, create a new helper xfs_trans_alloc_icreate that
allocates a transaction and reserves the appropriate amount of quota
against that transction.  Replace all the open-coded idioms with a
single call to this helper so that we can contain the retry loops in the
next patchset.

This changes the locking behavior for non-tempfile creation slightly, in
that we now make the quota reservation without holding the directory
ILOCK.  While the dquots chosen for inode creation are based on the
directory state at a given point in time, the directory ILOCK was
released as soon as the dquot references are picked up.  Hence it was
never necessary to hold the directory ILOCK for the quota reservation.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Create a proper helper so that inode creation calls can reserve quota
with a dedicated function.
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

Enable idmapped mounts for xfs. This basically just means passing down
the user_namespace argument from the VFS methods down to where it is
passed to the relevant helpers.

Note that full-filesystem bulkstat is not supported from inside idmapped
mounts as it is an administrative operation that acts on the whole file
system. The limitation is not applied to the bulkstat single operation
that just operates on a single inode.

Link: https://lore.kernel.org/r/20210121131959.646623-40-christian.brauner@ubuntu.comSigned-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChristian Brauner <christian.brauner@ubuntu.com>

XFS always inherits the SGID bit if it is set on the parent inode, while
the generic inode_init_owner does not do this in a few cases where it can
create a possible security problem, see commit 0fa3ecd8
("Fix up non-directory creation in SGID directories") for details.

Switch XFS to use the generic helper for the normal path to fix this,
just keeping the simple field inheritance open coded for the case of the
non-sgid case with the bsdgrpid mount option.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: NChristian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <djwong@kernel.org>
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>

A rename operation is essentially a directory entry remove operation
from the perspective of parent directory (i.e. src_dp) of rename's
source. Hence the only place where we check for extent count overflow
for src_dp is in xfs_bmap_del_extent_real(). xfs_bmap_del_extent_real()
returns -ENOSPC when it detects a possible extent count overflow and in
response, the higher layers of directory handling code do the following:
1. Data/Free blocks: XFS lets these blocks linger until a future remove
   operation removes them.
2. Dabtree blocks: XFS swaps the blocks with the last block in the Leaf
   space and unmaps the last block.

For target_dp, there are two cases depending on whether the destination
directory entry exists or not.

When destination directory entry does not exist (i.e. target_ip ==
NULL), extent count overflow check is performed only when transaction
has a non-zero sized space reservation associated with it.  With a
zero-sized space reservation, XFS allows a rename operation to continue
only when the directory has sufficient free space in its data/leaf/free
space blocks to hold the new entry.

When destination directory entry exists (i.e. target_ip != NULL), all
we need to do is change the inode number associated with the already
existing entry. Hence there is no need to perform an extent count
overflow check.
Signed-off-by: NChandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Directory entry addition can cause the following,
1. Data block can be added/removed.
   A new extent can cause extent count to increase by 1.
2. Free disk block can be added/removed.
   Same behaviour as described above for Data block.
3. Dabtree blocks.
   XFS_DA_NODE_MAXDEPTH blocks can be added. Each of these
   can be new extents. Hence extent count can increase by
   XFS_DA_NODE_MAXDEPTH.
Signed-off-by: NChandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

When overlayfs is running on top of xfs and the user unlinks a file in
the overlay, overlayfs will create a whiteout inode and ask xfs to
"rename" the whiteout file atop the one being unlinked.  If the file
being unlinked loses its one nlink, we then have to put the inode on the
unlinked list.

This requires us to grab the AGI buffer of the whiteout inode to take it
off the unlinked list (which is where whiteouts are created) and to grab
the AGI buffer of the file being deleted.  If the whiteout was created
in a higher numbered AG than the file being deleted, we'll lock the AGIs
in the wrong order and deadlock.

Therefore, grab all the AGI locks we think we'll need ahead of time, and
in order of increasing AG number per the locking rules.
Reported-by: Nwenli xie <wlxie7296@gmail.com>
Fixes: 93597ae8 ("xfs: Fix deadlock between AGI and AGF when target_ip exists in xfs_rename()")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

This patch explicitly separates free inode chunk allocation and
inode allocation into two individual high level operations.
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Get rid of the confusing ialloc_context and failure handling around
xfs_dialloc() by moving xfs_dialloc_roll() into xfs_dialloc().
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

So xfs_ialloc() will only address in-core inode allocation then,
Also, rename xfs_ialloc() to xfs_dir_ialloc_init() in order to
keep everything in xfs_inode.c under the same namespace.
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Introduce a helper to make the on-disk inode allocation rolling
logic clearer in preparation of the following cleanup.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Nowadays the only things that the XFS_TRANS_DQ_DIRTY flag seems to do
are indicates the tp->t_dqinfo->dqs[XFS_QM_TRANS_{USR,GRP,PRJ}] values
changed and check in xfs_trans_apply_dquot_deltas() and the unreserve
variant xfs_trans_unreserve_and_mod_dquots(). Actually, we also can
use the tp->t_dqinfo value instead of the XFS_TRANS_DQ_DIRTY flag, that
is to say, we allocate the new tp->t_dqinfo only when the qtrx values
changed, so the tp->t_dqinfo value isn't NULL equals the XFS_TRANS_DQ_DIRTY
flag is set, we only need to check if tp->t_dqinfo == NULL in
xfs_trans_apply_dquot_deltas() and its unreserve variant to determine
whether lock all of the dquots and join them to the transaction.
Signed-off-by: NKaixu Xia <kaixuxia@tencent.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Refactor all the open-coded validation of file block ranges into a
single helper, and teach the bmap scrubber to check the ranges.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The inode extent truncate path unmaps extents from the inode block
mapping, finishes deferred ops to free the associated extents and
then explicitly rolls the transaction before processing the next
extent. The latter extent roll is spurious as xfs_defer_finish()
always returns a clean transaction and automatically relogs inodes
attached to the transaction (with lock_flags == 0). This can
unnecessarily increase the number of log ticket regrants that occur
during a long running truncate operation. Remove the explicit
transaction roll.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

While running generic/042 with -drtinherit=1 set in MKFS_OPTIONS, I
observed that the kernel will gladly set the realtime flag on any file
created on the loopback filesystem even though that filesystem doesn't
actually have a realtime device attached.  This leads to verifier
failures and doesn't make any sense, so be smarter about this.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Hoist the code that propagates di_flags and di_flags2 from a parent to a
new child into separate functions.  No functional changes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Redesign the ondisk inode timestamps to be a simple unsigned 64-bit
counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the
32-bit unix time epoch).  This enables us to handle dates up to 2486,
which solves the y2038 problem.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGao Xiang <hsiangkao@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>

Move the buffer retry state machine logic to xfs_buf.c and call it once
from xfs_ioend instead of duplicating it three times for the three kinds
of buffers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

With the recent rework of the inode cluster flushing, we no longer
ever wait on the the inode flush "lock". It was never a lock in the
first place, just a completion to allow callers to wait for inode IO
to complete. We now never wait for flush completion as all inode
flushing is non-blocking. Hence we can get rid of all the iflock
infrastructure and instead just set and check a state flag.

Rename the XFS_IFLOCK flag to XFS_IFLUSHING, convert all the
xfs_iflock_nowait() test-and-set operations on that flag, and
replace all the xfs_ifunlock() calls to clear operations.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Delete repeated words in fs/xfs/.
{we, that, the, a, to, fork}
Change "it it" to "it is" in one location.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
To: linux-fsdevel@vger.kernel.org
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: linux-xfs@vger.kernel.org
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

In the course of some operations, we look up the perag from
the mount multiple times to get or change perag information.
These are often very short pieces of code, so while the
lookup cost is generally low, the cost of the lookup is far
higher than the cost of the operation we are doing on the
perag.

Since we changed buffers to hold references to the perag
they are cached in, many modification contexts already hold
active references to the perag that are held across these
operations. This is especially true for any operation that
is serialised by an allocation group header buffer.

In these cases, we can just use the buffer's reference to
the perag to avoid needing to do lookups to access the
perag. This means that many operations don't need to do
perag lookups at all to access the perag because they've
already looked up objects that own persistent references
and hence can use that reference instead.

Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

This debug code is called on every xfs_iflush() call, which then
checks every inode in the buffer for non-zero unlinked list field.
Hence it checks every inode in the cluster buffer every time a
single inode on that cluster it flushed. This is resulting in:

-   38.91%     5.33%  [kernel]  [k] xfs_iflush
   - 17.70% xfs_iflush
      - 9.93% xfs_inobp_check
           4.36% xfs_buf_offset

10% of the CPU time spent flushing inodes is repeatedly checking
unlinked fields in the buffer. We don't need to do this.

The other place we call xfs_inobp_check() is
xfs_iunlink_update_dinode(), and this is after we've done this
assert for the agino we are about to write into that inode:

	ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino));

which means we've already checked that the agino we are about to
write is not 0 on debug kernels. The inode buffer verifiers do
everything else we need, so let's just remove this debug code.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Now that we have all the dirty inodes attached to the cluster
buffer, we don't actually have to do radix tree lookups to find
them. Sure, the radix tree is efficient, but walking a linked list
of just the dirty inodes attached to the buffer is much better.

We are also no longer dependent on having a locked inode passed into
the function to determine where to start the lookup. This means we
can drop it from the function call and treat all inodes the same.

We also make xfs_iflush_cluster skip inodes marked with
XFS_IRECLAIM. This we avoid races with inodes that reclaim is
actively referencing or are being re-initialised by inode lookup. If
they are actually dirty, they'll get written by a future cluster
flush....

We also add a shutdown check after obtaining the flush lock so that
we catch inodes that are dirty in memory and may have inconsistent
state due to the shutdown in progress. We abort these inodes
directly and so they remove themselves directly from the buffer list
and the AIL rather than having to wait for the buffer to be failed
and callbacks run to be processed correctly.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

with xfs_iflush() gone, we can rename xfs_iflush_int() back to
xfs_iflush(). Also move it up above xfs_iflush_cluster() so we don't
need the forward definition any more.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Now we have a cached buffer on inode log items, we don't need
to do buffer lookups when flushing inodes anymore - all we need
to do is lock the buffer and we are ready to go.

This largely gets rid of the need for xfs_iflush(), which is
essentially just a mechanism to look up the buffer and flush the
inode to it. Instead, we can just call xfs_iflush_cluster() with a
few modifications to ensure it also flushes the inode we already
hold locked.

This allows the AIL inode item pushing to be almost entirely
non-blocking in XFS - we won't block unless memory allocation
for the cluster inode lookup blocks or the block device queues are
full.

Writeback during inode reclaim becomes a little more complex because
we now have to lock the buffer ourselves, but otherwise this change
is largely a functional no-op that removes a whole lot of code.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Rather than attach inodes to the cluster buffer just when we are
doing IO, attach the inodes to the cluster buffer when they are
dirtied. The means the buffer always carries a list of dirty inodes
that reference it, and we can use that list to make more fundamental
changes to inode writeback that aren't otherwise possible.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Once we have inodes pinning the cluster buffer and attached whenever
they are dirty, we no longer have a guarantee that the items are
flush locked when we lock the cluster buffer. Hence we cannot just
walk the buffer log item list and modify the attached inodes.

If the inode is not flush locked, we have to ILOCK it first and then
flush lock it to do all the prerequisite checks needed to avoid
races with other code. This is already handled by
xfs_ifree_get_one_inode(), so rework the inode iteration loop and
function to update all inodes in cache whether they are attached to
the buffer or not.

Note: we also remove the copying of the log item lsn to the
ili_flush_lsn as xfs_iflush_done() now uses the XFS_ISTALE flag to
trigger aborts and so flush lsn matching is not needed in IO
completion for processing freed inodes.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

They are not used anymore, so remove them from the log item and the
buffer iodone attachment interfaces.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Having different io completion callbacks for different inode states
makes things complex. We can detect if the inode is stale via the
XFS_ISTALE flag in IO completion, so we don't need a special
callback just for this.

This means inodes only have a single iodone callback, and inode IO
completion is entirely buffer centric at this point. Hence we no
longer need to use a log item callback at all as we can just call
xfs_iflush_done() directly from the buffer completions and walk the
buffer log item list to complete the all inodes under IO.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Inode buffers always have write IO callbacks, so by marking them
directly we can avoid needing to attach ->b_iodone functions to
them. This avoids an indirect call, and makes future modifications
much simpler.

While this is largely a refactor of existing functionality, we
broaden the scope of the flag to beyond where inodes are explicitly
attached because future changes need to know what type of log items
are attached to the buffer. Adding this buffer flag may invoke the
inode iodone callback in cases where it wouldn't have been
previously, but this is not a functional change because the callback
is identical to the normal buffer write iodone callback when inodes
are not attached.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The inode log item is kind of special in that it can be aggregating
new changes in memory at the same time time existing changes are
being written back to disk. This means there are fields in the log
item that are accessed concurrently from contexts that don't share
any locking at all.

e.g. updating ili_last_fields occurs at flush time under the
ILOCK_EXCL and flush lock at flush time, under the flush lock at IO
completion time, and is read under the ILOCK_EXCL when the inode is
logged.  Hence there is no actual serialisation between reading the
field during logging of the inode in transactions vs clearing the
field in IO completion.

We currently get away with this by the fact that we are only
clearing fields in IO completion, and nothing bad happens if we
accidentally log more of the inode than we actually modify. Worst
case is we consume a tiny bit more memory and log bandwidth.

However, if we want to do more complex state manipulations on the
log item that requires updates at all three of these potential
locations, we need to have some mechanism of serialising those
operations. To do this, introduce a spinlock into the log item to
serialise internal state.

This could be done via the xfs_inode i_flags_lock, but this then
leads to potential lock inversion issues where inode flag updates
need to occur inside locks that best nest inside the inode log item
locks (e.g. marking inodes stale during inode cluster freeing).
Using a separate spinlock avoids these sorts of problems and
simplifies future code.

This does not touch the use of ili_fields in the item formatting
code - that is entirely protected by the ILOCK_EXCL at this point in
time, so it remains untouched.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

This was used to track if the item had logged fields being flushed
to disk. We log everything in the inode these days, so this logic is
no longer needed. Remove it.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>