- 28 1月, 2013 4 次提交
-
-
由 Eric Dumazet 提交于
Pravin Shelar mentioned that GSO could potentially generate wrong TX checksum if skb has fragments that are overwritten by the user between the checksum computation and transmit. He suggested to linearize skbs but this extra copy can be avoided for normal tcp skbs cooked by tcp_sendmsg(). This patch introduces a new SKB_GSO_SHARED_FRAG flag, set in skb_shinfo(skb)->gso_type if at least one frag can be modified by the user. Typical sources of such possible overwrites are {vm}splice(), sendfile(), and macvtap/tun/virtio_net drivers. Tested: $ netperf -H 7.7.8.84 MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3959.52 $ netperf -H 7.7.8.84 -t TCP_SENDFILE TCP SENDFILE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.8.84 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 3216.80 Performance of the SENDFILE is impacted by the extra allocation and copy, and because we use order-0 pages, while the TCP_STREAM uses bigger pages. Reported-by: NPravin Shelar <pshelar@nicira.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
sock->sk_dst_cache is protected by RCU. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
sock->sk_dst_cache is protected by RCU, therefore we should use __sk_dst_get() to deref it once we lock the sock. This fixes several sparse warnings. Cc: linux-decnet-user@lists.sourceforge.net Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
First number, then size. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2013 6 次提交
-
-
由 Oliver Hartkopp 提交于
Add a statistic counter to detect deleted frames due to misconfiguration with a new read-only CGW_DELETED netlink attribute for the CAN gateway. Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Oliver Hartkopp 提交于
Introduce new configuration flag CGW_FLAGS_CAN_IIF_TX_OK to configure if a CAN sk_buff that has been routed with can-gw is allowed to be send back to the originating CAN interface. Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Oliver Hartkopp 提交于
The struct can_skb_priv is used to transport additional information along with the stored struct can(fd)_frame that can not be contained in existing struct sk_buff elements. can_skb_priv is located in the skb headroom, which does not touch the existing CAN sk_buff usage with skb->data and skb->len, so that even out-of-tree CAN drivers can be used without changes. Btw. out-of-tree CAN drivers without can_skb_priv in the sk_buff headroom would not support features based on can_skb_priv. The can_skb_priv->ifindex contains the first interface where the CAN frame appeared on the local host. Unfortunately skb->skb_iif can not be used as this value is overwritten in every netif_receive_skb() call. Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Kurt Van Dijck 提交于
The LED trigger name for CAN devices is based on the initial CAN device name, but does never change. The LED trigger name is not guaranteed to be unique in case of hotplugging CAN devices. This patch tries to address this problem by modifying the LED trigger name according to the CAN device name when the latter changes. v1 - Kurt Van Dijck v2 - Fabio Baltieri - remove rename blocking if trigger is bound - use led-subsystem function for the actual rename (still WiP) - call init/exit functions from dev.c v3 - Kurt Van Dijck - safe operation for non-candev based devices (vcan, slcan) based on earlier patch v4 - Kurt Van Dijck - trivial patch mistakes fixed Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Kurt Van Dijck 提交于
In net_device notifier calls, it was impossible to determine if a CAN device is based on candev in a safe way. This patch adds such test in order to access candev storage from within those notifiers. Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Fabio Baltieri 提交于
This patch implements the functions to add two LED triggers, named <ifname>-tx and <ifname>-rx, to a canbus device driver. Triggers are called from specific handlers by each CAN device driver and can be disabled altogether with a Kconfig option. The implementation keeps the LED on when the interface is UP and blinks the LED on network activity at a configurable rate. This only supports can-dev based drivers, as it uses some support field in the can_priv structure. Supported drivers should call devm_can_led_init() and can_led_event() as needed. Cleanup is handled automatically by devres, so no *_exit function is needed. Supported events are: - CAN_LED_EVENT_OPEN: turn on tx/rx LEDs - CAN_LED_EVENT_STOP: turn off tx/rx LEDs - CAN_LED_EVENT_TX: trigger tx LED blink - CAN_LED_EVENT_RX: trigger tx LED blink Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com> Acked-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
- 24 1月, 2013 3 次提交
-
-
由 Tom Herbert 提交于
Motivation for soreuseport would be something like a web server binding to port 80 running with multiple threads, where each thread might have it's own listener socket. This could be done as an alternative to other models: 1) have one listener thread which dispatches completed connections to workers. 2) accept on a single listener socket from multiple threads. In case #1 the listener thread can easily become the bottleneck with high connection turn-over rate. In case #2, the proportion of connections accepted per thread tends to be uneven under high connection load (assuming simple event loop: while (1) { accept(); process() }, wakeup does not promote fairness among the sockets. We have seen the disproportion to be as high as 3:1 ratio between thread accepting most connections and the one accepting the fewest. With so_reusport the distribution is uniform. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Allow multiple listener sockets to bind to the same port. Motivation for soresuseport would be something like a web server binding to port 80 running with multiple threads, where each thread might have it's own listener socket. This could be done as an alternative to other models: 1) have one listener thread which dispatches completed connections to workers. 2) accept on a single listener socket from multiple threads. In case #1 the listener thread can easily become the bottleneck with high connection turn-over rate. In case #2, the proportion of connections accepted per thread tends to be uneven under high connection load (assuming simple event loop: while (1) { accept(); process() }, wakeup does not promote fairness among the sockets. We have seen the disproportion to be as high as 3:1 ratio between thread accepting most connections and the one accepting the fewest. With so_reusport the distribution is uniform. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Definitions and macros for implementing soreusport. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2013 11 次提交
-
-
由 Gao feng 提交于
Move the code that register/unregister l4proto to the module_init/exit context. Given that we have to modify some interfaces to accomodate these changes, it is a good time to use shorter function names for this using the nf_ct_* prefix instead of nf_conntrack_*, that is: nf_ct_l4proto_register nf_ct_l4proto_pernet_register nf_ct_l4proto_unregister nf_ct_l4proto_pernet_unregister We same many line breaks with it. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the code that register/unregister l3proto to the module_init/exit context. Given that we have to modify some interfaces to accomodate these changes, it is a good time to use shorter function names for this using the nf_ct_* prefix instead of nf_conntrack_*, that is: nf_ct_l3proto_register nf_ct_l3proto_pernet_register nf_ct_l3proto_unregister nf_ct_l3proto_pernet_unregister We same many line breaks with it. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
nf_conntrack initialization and cleanup codes happens in pernet operations function. This task should be done in module_init/exit. We can't use init_net to identify if it's the right time to initialize or cleanup since we cannot make assumption on the order netns are created/destroyed. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 22 1月, 2013 6 次提交
-
-
由 Amos Kong 提交于
Currently we write MAC address to pci config space byte by byte, this means that we have an intermediate step where mac is wrong. This patch introduced a new control command to set MAC address, it's atomic. VIRTIO_NET_F_CTRL_MAC_ADDR is a new feature bit for compatibility. Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
When we set mac address, software mac address in system and hardware mac address all need to be updated. Current eth_mac_addr() doesn't allow callers to implement error handling nicely. This patch split eth_mac_addr() to prepare part and real commit part, then we can prepare first, and try to change hardware address, then do the real commit if hardware address is set successfully. Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This patch add the support of proxy multicast, ie being able to build a static multicast tree. It adds the support of (*,*) and (*,G) entries. The user should define an (*,*) entry which is not used for real forwarding. This entry defines the upstream in iif and contains all interfaces from the static tree in its oifs. It will be used to forward packet upstream when they come from an interface belonging to the static tree. Hence, the user should define (*,G) entries to build its static tree. Note that upstream interface must be part of oifs: packets are sent to all oifs interfaces except the input interface. This ensures to always join the whole static tree, even if the packet is not coming from the upstream interface. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This will ease further addition of new MRT[6]_* values and avoid to update in6.h each time. Note that we reduce the maximum value from 210 to 209, but 210 does not match any known value in ip[6]_mroute_setsockopt(). Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
- move ip6_nd_hdr() to its users' source files. In net/ipv6/mcast.c, it will be called ip6_mc_hdr(). - make return type to void since this function never fails. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
This also makes ndisc_opt_addr_data() and ndisc_fill_addr_option() use ndisc_opt_addr_space(). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2013 8 次提交
-
-
由 Pablo Neira Ayuso 提交于
In (c539f017 netfilter: add connlabel conntrack extension), it was missing the change to the Kbuild file to install the header in the system. Reported-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pablo Neira Ayuso 提交于
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Willem de Bruijn 提交于
Support arbitrary linux socket filter (BPF) programs as x_tables match rules. This allows for very expressive filters, and on platforms with BPF JIT appears competitive with traditional hardcoded iptables rules using the u32 match. The size of the filter has been artificially limited to 64 instructions maximum to avoid bloating the size of each rule using this new match. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Steffen Klassert 提交于
XFRM_REPLAY_SEQ, XFRM_REPLAY_OSEQ and XFRM_REPLAY_SEQ_MASK were introduced years ago but actually never used. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
ipv6_addr_is_{multicast,ll_all_nodes,ll_all_routers,isatap}() return boolean. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2013 1 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Because of rt->n removal, we do not need neigh argument any more. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2013 1 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-