- 13 5月, 2016 7 次提交
-
-
由 Dan Fuhry 提交于
Two new flags, RENAME_EXCHANGE and RENAME_WHITEOUT, provide for new behavior in the renameat2() syscall. This behavior is primarily used by overlayfs. This patch adds support for these flags to btrfs, enabling it to be used as a fully functional upper layer for overlayfs. RENAME_EXCHANGE support was written by Davide Italiano originally submitted on 2 April 2015. Signed-off-by: NDavide Italiano <dccitaliano@gmail.com> Signed-off-by: NDan Fuhry <dfuhry@datto.com> [ remove unlikely ] Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com>
-
由 Filipe Manana 提交于
We were pinning the log right after the first step in the rename operation (inserting inode ref for the new name in the destination directory) instead of doing it before. This behaviour was introduced in 2009 for some reason that was not mentioned neither on the changelog nor any comment, with the drawback of a small time window where concurrent log writers can end up logging the new inode reference for the inode we are renaming while the rename operation is in progress (so that we can end up with a log containing both the new and old references). As of today there's no reason to not pin the log before that first step anymore, so just fix this. Signed-off-by: NFilipe Manana <fdmanana@suse.com>
-
由 Filipe Manana 提交于
If rename operations fail at some point after we pinned the log, we end up aborting the current transaction but never unpin the log, which leaves concurrent tasks that are trying to sync the log (as part of an fsync request from user space) blocked forever and preventing the filesystem from being unmountable. Fix this by safely unpinning the log. Signed-off-by: NFilipe Manana <fdmanana@suse.com>
-
由 Filipe Manana 提交于
Before we start the actual relocation process of a block group, we do calls to flush delalloc of all inodes and then wait for ordered extents to complete. However we do these flush calls just to make sure we don't race with concurrent tasks that have actually already started to run delalloc and have allocated an extent from the block group we want to relocate, right before we set it to readonly mode, but have not yet created the respective ordered extents. The flush calls make us wait for such concurrent tasks because they end up calling filemap_fdatawrite_range() (through btrfs_start_delalloc_roots() -> __start_delalloc_inodes() -> btrfs_alloc_delalloc_work() -> btrfs_run_delalloc_work()) which ends up serializing us with those tasks due to attempts to lock the same pages (and the delalloc flush procedure calls the allocator and creates the ordered extents before unlocking the pages). These flushing calls not only make us waste time (cpu, IO) but also reduce the chances of writing larger extents (applications might be writing to contiguous ranges and we flush before they finish dirtying the whole ranges). So make sure we don't flush delalloc and just wait for concurrent tasks that have already started flushing delalloc and have allocated an extent from the block group we are about to relocate. This change also ends up fixing a race with direct IO writes that makes relocation not wait for direct IO ordered extents. This race is illustrated by the following diagram: CPU 1 CPU 2 btrfs_relocate_block_group(bg X) starts direct IO write, target inode currently has no ordered extents ongoing nor dirty pages (delalloc regions), therefore the root for our inode is not in the list fs_info->ordered_roots btrfs_direct_IO() __blockdev_direct_IO() btrfs_get_blocks_direct() btrfs_lock_extent_direct() locks range in the io tree btrfs_new_extent_direct() btrfs_reserve_extent() --> extent allocated from bg X btrfs_inc_block_group_ro(bg X) btrfs_start_delalloc_roots() __start_delalloc_inodes() --> does nothing, no dealloc ranges in the inode's io tree so the inode's root is not in the list fs_info->delalloc_roots btrfs_wait_ordered_roots() --> does not find the inode's root in the list fs_info->ordered_roots --> ends up not waiting for the direct IO write started by the task at CPU 2 relocate_block_group(rc->stage == MOVE_DATA_EXTENTS) prepare_to_relocate() btrfs_commit_transaction() iterates the extent tree, using its commit root and moves extents into new locations btrfs_add_ordered_extent_dio() --> now a ordered extent is created and added to the list root->ordered_extents and the root added to the list fs_info->ordered_roots --> this is too late and the task at CPU 1 already started the relocation btrfs_commit_transaction() btrfs_finish_ordered_io() btrfs_alloc_reserved_file_extent() --> adds delayed data reference for the extent allocated from bg X relocate_block_group(rc->stage == UPDATE_DATA_PTRS) prepare_to_relocate() btrfs_commit_transaction() --> delayed refs are run, so an extent item for the allocated extent from bg X is added to extent tree --> commit roots are switched, so the next scan in the extent tree will see the extent item sees the extent in the extent tree When this happens the relocation produces the following warning when it finishes: [ 7260.832836] ------------[ cut here ]------------ [ 7260.834653] WARNING: CPU: 5 PID: 6765 at fs/btrfs/relocation.c:4318 btrfs_relocate_block_group+0x245/0x2a1 [btrfs]() [ 7260.838268] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc [ 7260.850935] CPU: 5 PID: 6765 Comm: btrfs Not tainted 4.5.0-rc6-btrfs-next-28+ #1 [ 7260.852998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7260.852998] 0000000000000000 ffff88020bf57bc0 ffffffff812648b3 0000000000000000 [ 7260.852998] 0000000000000009 ffff88020bf57bf8 ffffffff81051608 ffffffffa03c1b2d [ 7260.852998] ffff8800b2bbb800 0000000000000000 ffff8800b17bcc58 ffff8800399dd000 [ 7260.852998] Call Trace: [ 7260.852998] [<ffffffff812648b3>] dump_stack+0x67/0x90 [ 7260.852998] [<ffffffff81051608>] warn_slowpath_common+0x99/0xb2 [ 7260.852998] [<ffffffffa03c1b2d>] ? btrfs_relocate_block_group+0x245/0x2a1 [btrfs] [ 7260.852998] [<ffffffff810516d4>] warn_slowpath_null+0x1a/0x1c [ 7260.852998] [<ffffffffa03c1b2d>] btrfs_relocate_block_group+0x245/0x2a1 [btrfs] [ 7260.852998] [<ffffffffa039d9de>] btrfs_relocate_chunk.isra.29+0x66/0xdb [btrfs] [ 7260.852998] [<ffffffffa039f314>] btrfs_balance+0xde1/0xe4e [btrfs] [ 7260.852998] [<ffffffff8127d671>] ? debug_smp_processor_id+0x17/0x19 [ 7260.852998] [<ffffffffa03a9583>] btrfs_ioctl_balance+0x255/0x2d3 [btrfs] [ 7260.852998] [<ffffffffa03ac96a>] btrfs_ioctl+0x11e0/0x1dff [btrfs] [ 7260.852998] [<ffffffff811451df>] ? handle_mm_fault+0x443/0xd63 [ 7260.852998] [<ffffffff81491817>] ? _raw_spin_unlock+0x31/0x44 [ 7260.852998] [<ffffffff8108b36a>] ? arch_local_irq_save+0x9/0xc [ 7260.852998] [<ffffffff811876ab>] vfs_ioctl+0x18/0x34 [ 7260.852998] [<ffffffff81187cb2>] do_vfs_ioctl+0x550/0x5be [ 7260.852998] [<ffffffff81190c30>] ? __fget_light+0x4d/0x71 [ 7260.852998] [<ffffffff81187d77>] SyS_ioctl+0x57/0x79 [ 7260.852998] [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7260.893268] ---[ end trace eb7803b24ebab8ad ]--- This is because at the end of the first stage, in relocate_block_group(), we commit the current transaction, which makes delayed refs run, the commit roots are switched and so the second stage will find the extent item that the ordered extent added to the delayed refs. But this extent was not moved (ordered extent completed after first stage finished), so at the end of the relocation our block group item still has a positive used bytes counter, triggering a warning at the end of btrfs_relocate_block_group(). Later on when trying to read the extent contents from disk we hit a BUG_ON() due to the inability to map a block with a logical address that belongs to the block group we relocated and is no longer valid, resulting in the following trace: [ 7344.885290] BTRFS critical (device sdi): unable to find logical 12845056 len 4096 [ 7344.887518] ------------[ cut here ]------------ [ 7344.888431] kernel BUG at fs/btrfs/inode.c:1833! [ 7344.888431] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 7344.888431] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc [ 7344.888431] CPU: 0 PID: 6831 Comm: od Tainted: G W 4.5.0-rc6-btrfs-next-28+ #1 [ 7344.888431] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7344.888431] task: ffff880215818600 ti: ffff880204684000 task.ti: ffff880204684000 [ 7344.888431] RIP: 0010:[<ffffffffa037c88c>] [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs] [ 7344.888431] RSP: 0018:ffff8802046878f0 EFLAGS: 00010282 [ 7344.888431] RAX: 00000000ffffffea RBX: 0000000000001000 RCX: 0000000000000001 [ 7344.888431] RDX: ffff88023ec0f950 RSI: ffffffff8183b638 RDI: 00000000ffffffff [ 7344.888431] RBP: ffff880204687908 R08: 0000000000000001 R09: 0000000000000000 [ 7344.888431] R10: ffff880204687770 R11: ffffffff82f2d52d R12: 0000000000001000 [ 7344.888431] R13: ffff88021afbfee8 R14: 0000000000006208 R15: ffff88006cd199b0 [ 7344.888431] FS: 00007f1f9e1d6700(0000) GS:ffff88023ec00000(0000) knlGS:0000000000000000 [ 7344.888431] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7344.888431] CR2: 00007f1f9dc8cb60 CR3: 000000023e3b6000 CR4: 00000000000006f0 [ 7344.888431] Stack: [ 7344.888431] 0000000000001000 0000000000001000 ffff880204687b98 ffff880204687950 [ 7344.888431] ffffffffa0395c8f ffffea0004d64d48 0000000000000000 0000000000001000 [ 7344.888431] ffffea0004d64d48 0000000000001000 0000000000000000 0000000000000000 [ 7344.888431] Call Trace: [ 7344.888431] [<ffffffffa0395c8f>] submit_extent_page+0xf5/0x16f [btrfs] [ 7344.888431] [<ffffffffa03970ac>] __do_readpage+0x4a0/0x4f1 [btrfs] [ 7344.888431] [<ffffffffa039680d>] ? btrfs_create_repair_bio+0xcb/0xcb [btrfs] [ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs] [ 7344.888431] [<ffffffff8108df55>] ? trace_hardirqs_on+0xd/0xf [ 7344.888431] [<ffffffffa039728c>] __do_contiguous_readpages.constprop.26+0xc2/0xe4 [btrfs] [ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs] [ 7344.888431] [<ffffffffa039739b>] __extent_readpages.constprop.25+0xed/0x100 [btrfs] [ 7344.888431] [<ffffffff81129d24>] ? lru_cache_add+0xe/0x10 [ 7344.888431] [<ffffffffa0397ea8>] extent_readpages+0x160/0x1aa [btrfs] [ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs] [ 7344.888431] [<ffffffff8115daad>] ? alloc_pages_current+0xa9/0xcd [ 7344.888431] [<ffffffffa037cdc9>] btrfs_readpages+0x1f/0x21 [btrfs] [ 7344.888431] [<ffffffff81128316>] __do_page_cache_readahead+0x168/0x1fc [ 7344.888431] [<ffffffff811285a0>] ondemand_readahead+0x1f6/0x207 [ 7344.888431] [<ffffffff811285a0>] ? ondemand_readahead+0x1f6/0x207 [ 7344.888431] [<ffffffff8111cf34>] ? pagecache_get_page+0x2b/0x154 [ 7344.888431] [<ffffffff8112870e>] page_cache_sync_readahead+0x3d/0x3f [ 7344.888431] [<ffffffff8111dbf7>] generic_file_read_iter+0x197/0x4e1 [ 7344.888431] [<ffffffff8117773a>] __vfs_read+0x79/0x9d [ 7344.888431] [<ffffffff81178050>] vfs_read+0x8f/0xd2 [ 7344.888431] [<ffffffff81178a38>] SyS_read+0x50/0x7e [ 7344.888431] [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7344.888431] Code: 8d 4d e8 45 31 c9 45 31 c0 48 8b 00 48 c1 e2 09 48 8b 80 80 fc ff ff 4c 89 65 e8 48 8b b8 f0 01 00 00 e8 1d 42 02 00 85 c0 79 02 <0f> 0b 4c 0 [ 7344.888431] RIP [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs] [ 7344.888431] RSP <ffff8802046878f0> [ 7344.970544] ---[ end trace eb7803b24ebab8ae ]--- Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NJosef Bacik <jbacik@fb.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
-
由 Filipe Manana 提交于
Before the relocation process of a block group starts, it sets the block group to readonly mode, then flushes all delalloc writes and then finally it waits for all ordered extents to complete. This last step includes waiting for ordered extents destinated at extents allocated in other block groups, making us waste unecessary time. So improve this by waiting only for ordered extents that fall into the block group's range. Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NJosef Bacik <jbacik@fb.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
-
由 Filipe Manana 提交于
If we create a symlink, fsync its parent directory, crash/power fail and mount the filesystem, we end up with an empty symlink, which not only is useless it's also not allowed in linux (the man page symlink(2) is well explicit about that). So we just need to make sure to fully log an inode if it's a symlink, to ensure its inline extent gets logged, ensuring the same behaviour as ext3, ext4, xfs, reiserfs, f2fs, nilfs2, etc. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ sync $ ln -s /mnt/foo /mnt/testdir/bar $ xfs_io -c fsync /mnt/testdir <power fail> $ mount /dev/sdb /mnt $ readlink /mnt/testdir/bar <empty string> A test case for fstests follows soon. Signed-off-by: NFilipe Manana <fdmanana@suse.com>
-
由 Filipe Manana 提交于
If we move a directory to a new parent and later log that parent and don't explicitly log the old parent, when we replay the log we can end up with entries for the moved directory in both the old and new parent directories. Besides being ilegal to have directories with multiple hard links in linux, it also resulted in the leaving the inode item with a link count of 1. A similar issue also happens if we move a regular file - after the log tree is replayed the file has a link in both the old and new parent directories, when it should be only at the new directory. Sample reproducer: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/x $ mkdir /mnt/y $ touch /mnt/x/foo $ mkdir /mnt/y/z $ sync $ ln /mnt/x/foo /mnt/x/bar $ mv /mnt/y/z /mnt/x/z < power fail > $ mount /dev/sdc /mnt $ ls -1Ri /mnt /mnt: 257 x 258 y /mnt/x: 259 bar 259 foo 260 z /mnt/x/z: /mnt/y: 260 z /mnt/y/z: $ umount /dev/sdc $ btrfs check /dev/sdc Checking filesystem on /dev/sdc UUID: a67e2c4a-a4b4-4fdc-b015-9d9af1e344be checking extents checking free space cache checking fs roots root 5 inode 260 errors 2000, link count wrong unresolved ref dir 257 index 4 namelen 1 name z filetype 2 errors 0 unresolved ref dir 258 index 2 namelen 1 name z filetype 2 errors 0 (...) Attempting to remove the directory becomes impossible: $ mount /dev/sdc /mnt $ rmdir /mnt/y/z $ ls -lh /mnt/y ls: cannot access /mnt/y/z: No such file or directory total 0 d????????? ? ? ? ? ? z $ rmdir /mnt/x/z rmdir: failed to remove ‘/mnt/x/z’: Stale file handle $ ls -lh /mnt/x ls: cannot access /mnt/x/z: Stale file handle total 0 -rw-r--r-- 2 root root 0 Apr 6 18:06 bar -rw-r--r-- 2 root root 0 Apr 6 18:06 foo d????????? ? ? ? ? ? z So make sure that on rename we set the last_unlink_trans value for our inode, even if it's a directory, to the value of the current transaction's ID and that if the new parent directory is logged that we fallback to a transaction commit. A test case for fstests is being submitted as well. Signed-off-by: NFilipe Manana <fdmanana@suse.com>
-
- 09 5月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 08 5月, 2016 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull misc driver fixes from Gfreg KH: "Here are three small fixes for some driver problems that were reported. Full details in the shortlog below. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: mxs-ocotp: fix buffer overflow in read Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read() misc: mic: Fix for double fetch security bug in VOP driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull IIO driver fixes from Grek KH: "It's really just IIO drivers here, some small fixes that resolve some 'crash on boot' errors that have shown up in the -rc series, and other bugfixes that are required. All have been in linux-next with no reported problems" * tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: mpu6050: Fix name/chip_id when using ACPI iio: imu: mpu6050: fix possible NULL dereferences iio:adc:at91-sama5d2: Repair crash on module removal iio: ak8975: fix maybe-uninitialized warning iio: ak8975: Fix NULL pointer exception on early interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some last-remaining fixes for USB drivers to resolve issues that have shown up in testing. And two new device ids as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping" usb: musb: jz4740: fix error check of usb_get_phy() Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half" usb: musb: gadget: nuke endpoint before setting its descriptor to NULL USB: serial: cp210x: add Straizona Focusers device ids USB: serial: cp210x: add ID for Link ECU
-
- 07 5月, 2016 14 次提交
-
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "These are a number of updates to fix a few problems found in the ARM nommu code over the last couple of years, caused mostly by changes on the mmu side" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8573/1: domain: move {set,get}_domain under config guard ARM: 8572/1: nommu: change memory reserve for the vectors ARM: 8571/1: nommu: fix PMSAv7 setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: - deadlock fixes on driver probe at exynos4-is and s43-camif drivers - a build breakage if media controller is enabled and USB or PCI is built as module. * tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media-device: fix builds when USB or PCI is compiled as module [media] media: s3c-camif: fix deadlock on driver probe() [media] media: exynos4-is: fix deadlock on driver probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "An ahci driver addition and updates to ahci port enable handling for some platform devices" * 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: add AMD Seattle platform driver ARM: dts: apq8064: add ahci ports-implemented mask ata: ahci-platform: Add ports-implemented DT bindings. libahci: save port map for forced port map
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fix from Doug Ledford: "Fix for max sector calculation in iSER" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/iser: Fix max_sectors calculation
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull writeback fix from Jens Axboe: "Just a single fix for domain aware writeback, fixing a regression that can cause balance_dirty_pages() to keep looping while not getting any work done" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: Fix performance regression in wb_over_bg_thresh()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "This contains two fixes: a boot fix for older SGI/UV systems, and an APIC calibration fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "Fixes for problems introduced or discovered recently (intel_pstate, sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework, generic device properties framework) and one fix for a hotplug-related deadlock in ACPICA that's been there forever, but is nasty enough. Specifics: - Fix for a recent regression in the intel_pstate driver causing it to fail to restore the HWP (HW-managed P-states) configuration of the boot CPU after suspend-to-RAM (Rafael Wysocki). - Fix for two recent regressions in the intel_pstate driver, one that can trigger a divide by zero if the driver is accessed via sysfs before it manages to take the first sample and one causing it to fail to update a structure field used in a trace point, so the information coming from it is less useful (Rafael Wysocki). - Fix for a problem in the sti-cpufreq driver introduced during the 4.5 cycle that causes it to break CPU PM in multi-platform kernels by registering cpufreq-dt (which subsequently doesn't work) unconditionally and preventing the driver that would actually work from registering (Sudeep Holla). - Stable-candidate fix for an ARM64 cpuidle issue causing idle state usage counters to be incorrectly updated for idle states that were not entered due to errors (James Morse). - Fix for a recently introduced issue in the OPP (Operating Performance Points) framework causing it to print bogus error messages for missing optional regulators (Viresh Kumar). - Fix for a recently introduced issue in the generic device properties framework that may cause it to attempt to dereferece and invalid pointer in some cases (Heikki Krogerus). - Fix for a deadlock in the ACPICA core that may be triggered by device (eg Thunderbolt) hotplug (Prarit Bhargava)" * tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / OPP: Remove useless check ACPICA: Dispatcher: Update thread ID for recursive method calls intel_pstate: Fix intel_pstate_get() cpufreq: intel_pstate: Fix HWP on boot CPU after system resume cpufreq: st: enable selective initialization based on the platform ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value device property: Avoid potential dereferences of invalid pointers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fix from Ingo Molnar: "This contains a single fix that fixes a nohz tick stopping bug when mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "This tree contains two fixes: new Intel CPU model numbers and an AMD/iommu uncore PMU driver fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs perf/x86: Add model numbers for Kabylake CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull EFI fixes from Ingo Molnar: "This tree contains three fixes: a console spam fix, a file pattern fix and a sysfb_efi fix for a bug that triggered on older ThinkPads" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sysfb_efi: Fix valid BAR address range check x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT MAINTAINERS: Remove asterisk from EFI directory names
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fix from Helge Deller: "Patch from Dmitry V Levin to fix a kernel crash when a straced process calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls" * 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: "Late in the cycle, but this has fixes for couple of issues: a PAE40 boot crash and Arnd spotting lack of barriers in BE io-accessors. The 3rd patch for enabling highmem in low physical mem ;-) honestly is more than a "fix" but its been in works for some time, seems to be stable in testing and enables 2 of our customers to go forward with 4.6 kernel. - Fix for PTE truncation in PAE40 builds - Fix for big endian IO accessors lacking IO barrier - Allow HIGHMEM to work with low physical addresses" * tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: support HIGHMEM even without PAE40 ARC: Fix PAE40 boot failures due to PTE truncation ARC: Add missing io barriers to io{read,write}{16,32}be()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fix from Michael Ellerman: "Fix bad inline asm constraint in create_zero_mask() from Anton Blanchard" * tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix bad inline asm constraint in create_zero_mask()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Fixes for i915, amdgpu/radeon and imx. The IMX fix is for an autoloading regression found in Fedora. The radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware lockup in some circumstances with a bad mode, and a double free bug I took a few hours chasing down the other morning. The i915 fixes are across the board, all stable material, and fixing some hangs and suspend/resume issues, along with a live status regressions" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading drm/amdgpu: make sure vertical front porch is at least 1 drm/radeon: make sure vertical front porch is at least 1 drm/amdgpu: set metadata pointer to NULL after freeing. drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW drm/i915: Fake HDMI live status drm/i915: Fix eDP low vswing for Broadwell drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume drm/i915: Fix system resume if PCI device remained enabled drm/i915: Avoid stalling on pending flips for legacy cursor updates
-
- 06 5月, 2016 15 次提交
-
-
由 Dmitry V. Levin 提交于
Do not load one entry beyond the end of the syscall table when the syscall number of a traced process equals to __NR_Linux_syscalls. Similar bug with regular processes was fixed by commit 3bb457af ("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls"). This bug was found by strace test suite. Cc: stable@vger.kernel.org Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Acked-by: NHelge Deller <deller@gmx.de> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Rafael J. Wysocki 提交于
* pm-opp-fixes: PM / OPP: Remove useless check * pm-cpufreq-fixes: intel_pstate: Fix intel_pstate_get() cpufreq: intel_pstate: Fix HWP on boot CPU after system resume cpufreq: st: enable selective initialization based on the platform * pm-cpuidle-fixes: ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
-
由 Rafael J. Wysocki 提交于
* acpica-fixes: ACPICA: Dispatcher: Update thread ID for recursive method calls * device-properties-fixes: device property: Avoid potential dereferences of invalid pointers
-
由 Chen Yu 提交于
Currently we read the tsc radio: ratio = (MSR_PLATFORM_INFO >> 8) & 0x1f; Thus we get bit 8-12 of MSR_PLATFORM_INFO, however according to the SDM (35.5), the ratio bits are bit 8-15. Ignoring the upper bits can result in an incorrect tsc ratio, which causes the TSC calibration and the Local APIC timer frequency to be incorrect. Fix this problem by masking 0xff instead. [ tglx: Massaged changelog ] Fixes: 7da7c156 "x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs" Signed-off-by: NChen Yu <yu.c.chen@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: stable@vger.kernel.org Cc: Bin Gao <bin.gao@intel.com> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1462505619-5516-1-git-send-email-yu.c.chen@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: byteswap: try to avoid __builtin_constant_p gcc bug lib/stackdepot: avoid to return 0 handle mm: fix kcompactd hang during memory offlining modpost: fix module autoloading for OF devices with generic compatible property proc: prevent accessing /proc/<PID>/environ until it's ready mm/zswap: provide unique zpool name mm: thp: kvm: fix memory corruption in KVM with THP enabled MAINTAINERS: fix Rajendra Nayak's address mm, cma: prevent nr_isolated_* counters from going negative mm: update min_free_kbytes from khugepaged after core initialization huge pagecache: mmap_sem is unlocked when truncation splits pmd rapidio/mport_cdev: fix uapi type definitions mm: memcontrol: let v2 cgroups follow changes in system swappiness mm: thp: correct split_huge_pages file permission
-
由 Linus Torvalds 提交于
Apparently patchwork ended up truncating the full name. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: - a fix for the persistent memory 'struct page' driver. The implementation overlooked the fact that pages are allocated in 2MB units leading to -ENOMEM when establishing some configurations. It's tagged for -stable as the problem was introduced with the initial implementation in 4.5. - The new "error status translation" routine, introduced with the 4.6 updates to the nfit driver, missed a necessary path in acpi_nfit_ctl(). The end result is that we are falsely assuming commands complete successfully when the embedded status says otherwise. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: fix translation of command status results libnvdimm, pfn: fix memmap reservation sizing
-
由 Arnd Bergmann 提交于
This is another attempt to avoid a regression in wwn_to_u64() after that started using get_unaligned_be64(), which in turn ran into a bug on gcc-4.9 through 6.1. The regression got introduced due to the combination of two separate workarounds (commits e3bde956: "include/linux/unaligned: force inlining of byteswap operations" and ef3fb242: "scsi: fc: use get/put_unaligned64 for wwn access") that each try to sidestep distinct problems with gcc behavior (code growth and increased stack usage). Unfortunately after both have been applied, a more serious gcc bug has been uncovered, leading to incorrect object code that discards part of a function and causes undefined behavior. As part of this problem is how __builtin_constant_p gets evaluated on an argument passed by reference into an inline function, this avoids the use of __builtin_constant_p() for all architectures that set CONFIG_ARCH_USE_BUILTIN_BSWAP. Most architectures do not set ARCH_SUPPORTS_OPTIMIZED_INLINING, which means they probably do not suffer from the problem in the qla2xxx driver, but they might still run into it elsewhere. Both of the original workarounds were only merged in the 4.6 kernel, and the bug that is fixed by this patch should only appear if both are there, so we probably don't need to backport the fix. On the other hand, it works by simplifying the code path and should not have any negative effects. [arnd@arndb.de: fix older gcc warnings] (http://lkml.kernel.org/r/12243652.bxSxEgjgfk@wuerfel) Link: https://lkml.org/lkml/headers/2016/4/12/1103 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70232 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70646 Fixes: e3bde956 ("include/linux/unaligned: force inlining of byteswap operations") Fixes: ef3fb242 ("scsi: fc: use get/put_unaligned64 for wwn access") Link: http://lkml.kernel.org/r/1780465.XdtPJpi8Tt@wuerfelSigned-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> # on gcc-5.3 Tested-by: NQuinn Tran <quinn.tran@qlogic.com> Cc: Martin Jambor <mjambor@suse.cz> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Jan Hubicka <hubicka@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Recently, we allow to save the stacktrace whose hashed value is 0. It causes the problem that stackdepot could return 0 even if in success. User of stackdepot cannot distinguish whether it is success or not so we need to solve this problem. In this patch, 1 bit are added to handle and make valid handle none 0 by setting this bit. After that, valid handle will not be 0 and 0 handle will represent failure correctly. Fixes: 33334e25 ("lib/stackdepot.c: allow the stack trace hash to be zero") Link: http://lkml.kernel.org/r/1462252403-1106-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Assume memory47 is the last online block left in node1. This will hang: # echo offline > /sys/devices/system/node/node1/memory47/state After a couple of minutes, the following pops up in dmesg: INFO: task bash:957 blocked for more than 120 seconds. Not tainted 4.6.0-rc6+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D ffff8800b7adbaf8 0 957 951 0x00000000 Call Trace: schedule+0x35/0x80 schedule_timeout+0x1ac/0x270 wait_for_completion+0xe1/0x120 kthread_stop+0x4f/0x110 kcompactd_stop+0x26/0x40 __offline_pages.constprop.28+0x7e6/0x840 offline_pages+0x11/0x20 memory_block_action+0x73/0x1d0 memory_subsys_offline+0x47/0x60 device_offline+0x86/0xb0 store_mem_state+0xda/0xf0 dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x11d/0x170 __vfs_write+0x37/0x120 vfs_write+0xa9/0x1a0 SyS_write+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa4 kcompactd is waiting for kcompactd_max_order > 0 when it's woken up to actually exit. Check kthread_should_stop() to break out of the wait. Fixes: 698b1b30 ("mm, compaction: introduce kcompactd"). Reported-by: NReza Arbab <arbab@linux.vnet.ibm.com> Tested-by: NReza Arbab <arbab@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Philipp Zabel 提交于
Since the wildcard at the end of OF module aliases is gone, autoloading of modules that don't match a device's last (most generic) compatible value fails. For example the CODA960 VPU on i.MX6Q has the SoC specific compatible "fsl,imx6q-vpu" and the generic compatible "cnm,coda960". Since the driver currently only works with knowledge about the SoC specific integration, it doesn't list "cnm,cod960" in the module device table. This results in the device compatible "of:NvpuT<NULL>Cfsl,imx6q-vpuCcnm,coda960" not matching the module alias "of:N*T*Cfsl,imx6q-vpu" anymore, whereas before commit 2f632369 ("modpost: don't add a trailing wildcard for OF module aliases") it matched the module alias "of:N*T*Cfsl,imx6q-vpu*". This patch adds two module aliases for each compatible, one without the wildcard and one with "C*" appended. $ modinfo coda | grep imx6q alias: of:N*T*Cfsl,imx6q-vpuC* alias: of:N*T*Cfsl,imx6q-vpu Fixes: 2f632369 ("modpost: don't add a trailing wildcard for OF module aliases") Link: http://lkml.kernel.org/r/1462203339-15340-1-git-send-email-p.zabel@pengutronix.deSigned-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mathias Krause 提交于
If /proc/<PID>/environ gets read before the envp[] array is fully set up in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to read more bytes than are actually written, as env_start will already be set but env_end will still be zero, making the range calculation underflow, allowing to read beyond the end of what has been written. Fix this as it is done for /proc/<PID>/cmdline by testing env_end for zero. It is, apparently, intentionally set last in create_*_tables(). This bug was found by the PaX size_overflow plugin that detected the arithmetic underflow of 'this_len = env_end - (env_start + src)' when env_end is still zero. The expected consequence is that userland trying to access /proc/<PID>/environ of a not yet fully set up process may get inconsistent data as we're in the middle of copying in the environment variables. Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461Signed-off-by: NMathias Krause <minipli@googlemail.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: Pax Team <pageexec@freemail.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Streetman 提交于
Instead of using "zswap" as the name for all zpools created, add an atomic counter and use "zswap%x" with the counter number for each zpool created, to provide a unique name for each new zpool. As zsmalloc, one of the zpool implementations, requires/expects a unique name for each pool created, zswap should provide a unique name. The zsmalloc pool creation does not fail if a new pool with a conflicting name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case, zsmalloc pool creation fails with -ENOMEM. Then zswap will be unable to change its compressor parameter if its zpool is zsmalloc; it also will be unable to change its zpool parameter back to zsmalloc, if it has any existing old zpool using zsmalloc with page(s) in it. Attempts to change the parameters will result in failure to create the zpool. This changes zswap to provide a unique name for each zpool creation. Fixes: f1c54846 ("zswap: dynamic pool creation") Signed-off-by: NDan Streetman <ddstreet@ieee.org> Reported-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <dan.streetman@canonical.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
After the THP refcounting change, obtaining a compound pages from get_user_pages() no longer allows us to assume the entire compound page is immediately mappable from a secondary MMU. A secondary MMU doesn't want to call get_user_pages() more than once for each compound page, in order to know if it can map the whole compound page. So a secondary MMU needs to know from a single get_user_pages() invocation when it can map immediately the entire compound page to avoid a flood of unnecessary secondary MMU faults and spurious atomic_inc()/atomic_dec() (pages don't have to be pinned by MMU notifier users). Ideally instead of the page->_mapcount < 1 check, get_user_pages() should return the granularity of the "page" mapping in the "mm" passed to get_user_pages(). However it's non trivial change to pass the "pmd" status belonging to the "mm" walked by get_user_pages up the stack (up to the caller of get_user_pages). So the fix just checks if there is not a single pte mapping on the page returned by get_user_pages, and in turn if the caller can assume that the whole compound page is mapped in the current "mm" (in a pmd_trans_huge()). In such case the entire compound page is safe to map into the secondary MMU without additional get_user_pages() calls on the surrounding tail/head pages. In addition of being faster, not having to run other get_user_pages() calls also reduces the memory footprint of the secondary MMU fault in case the pmd split happened as result of memory pressure. Without this fix after a MADV_DONTNEED (like invoked by QEMU during postcopy live migration or balloning) or after generic swapping (with a failure in split_huge_page() that would only result in pmd splitting and not a physical page split), KVM would map the whole compound page into the shadow pagetables, despite regular faults or userfaults (like UFFDIO_COPY) may map regular pages into the primary MMU as result of the pte faults, leading to the guest mode and userland mode going out of sync and not working on the same memory at all times. Any other secondary MMU notifier manager (KVM is just one of the many MMU notifier users) will need the same information if it doesn't want to run a flood of get_user_pages_fast and it can support multiple granularity in the secondary MMU mappings, so I think it is justified to be exposed not just to KVM. The other option would be to move transparent_hugepage_adjust to mm/huge_memory.c but that currently has all kind of KVM data structures in it, so it's definitely not a cut-and-paste work, so I couldn't do a fix as cleaner as this one for 4.6. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Li, Liang Z" <liang.z.li@intel.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Engestrom 提交于
Signed-off-by: NEric Engestrom <eric.engestrom@imgtec.com> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: Afzal Mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-