- 18 11月, 2008 12 次提交
-
-
由 Takashi Iwai 提交于
Allow the multiple imux instances for matrix-type mixers like ALC882. So far, only ALC260 used this feature, but other codecs may need a similar stuff. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Use cached write for setting the GPIO unsolicited event mask to be restored properly at resume. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4. Reference: Novell bnc#445321, bnc#445161 https://bugzilla.novell.com/show_bug.cgi?id=445321 https://bugzilla.novell.com/show_bug.cgi?id=445161Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the GPIO mask and co initialization in patch_stac92hd71bxx() so that the gpio_maks for HP_M4 model is set properly. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed the restore of pin configs at resume for some STAC/IDT codec models. These models set explicitly the pin configs after the default init configs, and these aren't restored properly at resume. This patch introduces two changes: - Allocate always pin_configs array in stac_spec so that the driver can overwrite the value freely - Introduce stac_change_pin_config() to change the pin config value Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Call the init callback and remove duplicated codes in stac92xx_resume(). This also fixes the missing initialization such as digital I/O pins. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The jack detection input elements should be created in build_controls callback instead of init callback because init can be called multiple times by suspend/resume and power-saving. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Create /proc/asound/card<card_no>/eld#<codec_no> to reflect the audio configurations and capabilities of the attached HDMI sink. Some notes: - Shall we show an empty file if the ELD content is not valid? Well it's not that simple. There could be partially populated ELD, and there may be malformed ELD provided by buggy drivers/monitors. So expose ELD as it is. - The ELD retrieval routines rely on the Intel HDA interface, others are/could be universal and independent ones. - How do we name the proc file? If there are going to be two HDMI pins per codec, then the current naming scheme (eld#<codec no>) will fail. Luckily the user space dependencies should be minimal, so it would be trivial to do the rename if that happens. - The ELD proc file content is designed to be easy for scripts and human reading. Its lines all have the pattern: <item_name>\t[\t]*<item_value> where <item_name> is a keyword in c language, while <item_value> could be any contents, including white spaces. <item_value> could also be a null value. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
ELD handling routines can be shared by all HDMI codecs, and they are large enough to make a standalone source file. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
We want to share some code with print_pcm_rates(), so extract a common routine snd_print_pcm_rates() from it. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Remove get_amp_nid(): it duplicates the one defined in hda_local.h Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 11月, 2008 3 次提交
-
-
由 Wu Fengguang 提交于
Reorder HDMI audio enabling sequence so that 1) the sink knows about the coming audio stream 2) unmute 3) start transferring audio samples The theory is that in the path A=>B=>C, we first make C ready, and then enable B, and lastly allow A to send audio samples. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Add support for EAPD on system suspend and disabling EAPD on headphone jack detection for STAC_DELL_M6 laptops. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Add a new alc883 model ALC1200_ASUS_P5Q for ASUS P5Q-EM boards. It is the same as ALC883_6ST_DIG except that the SPDIF digital output nid is 0x10. Tested-by: NAndrei Tanas <andrei@tanas.ca> Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 11月, 2008 3 次提交
-
-
由 Takashi Iwai 提交于
Check board preset model instead of codec->subsystem_id in patch_92hd71bxx() so that other hardwares configured via the model option work like the given model. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Conflicts: sound/pci/hda/patch_sigmatel.c
-
由 Matthew Ranostay 提交于
Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the unsol response value is only 6-bits width and the former value was 1<<6 which is an overrun. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Split the bound Master control to individual Headphone and Speaker volume controls for VAIO with STAC982x codecs. The Master controls is still created as a vmaster. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 11月, 2008 5 次提交
-
-
由 Takashi Iwai 提交于
Conflicts: sound/pci/hda/patch_sigmatel.c
-
由 Takashi Iwai 提交于
Added a NULL check of input_allocate_device() in hda_beep.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The digital beep widget may have no mute control, and always enabling the beep is ofen pretty annoying, especially on laptops. This patch adds a mixer control "PC Beep Playback Switch" when there is no mixer amp mute is found, and controls it on software. Reference: Novell bnc#444572 https://bugzilla.novell.com/show_bug.cgi?id=444572Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Yang, Libin 提交于
The patch uses HD Audio PCI class code to detect AMD HD Audio cards. Signed-off-by: NLibin Yang <libin.yang@amd.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Move the handling of SiI1392 HDMI codec from patch_atihdmi.c to patch_intelhdmi.c, which makes our ASUS P5E-VM HDMI board work. Signed-off-by: NWu Fengguang <wfg@linux.intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 11月, 2008 3 次提交
-
-
由 Takashi Iwai 提交于
Conflicts: sound/pci/hda/patch_sigmatel.c
-
由 Takashi Iwai 提交于
Due to the recent change for multiple HP as line-out switch, only one of the multiple headphons (usually a wrong one) is toggled and the other pins are still disabled. This causes the silent output problem on some Dell laptops. Also, the hp_switch check is screwed up when a line-in or a mic-in jack exists. This is added as an additional output, but hp_switch check doesn't take it into account. This patch fixes these issues: simplify hp_switch check by using the NID instead of bool, and clean up / fix the toggle of HP pins in unsol event handler code. Reference: Novell bnc#443267 https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The input pins are sometimes not initialized properly because of the optimization check of the current pinctl code. Force to initialize the mic input pins so that they can be set up properly even if they were in a weird state. But keep other input pins if already set up as input, since this could be an extra mic pin. Reference: Novell bnc#443738 https://bugzilla.novell.com/show_bug.cgi?id=443738Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2008 2 次提交
-
-
由 Takashi Iwai 提交于
The creation of analog-mux mixer element is missing in patch_stac9200() due to the dynamic allocation patch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Travis Place 提交于
Added a QUIRK to patch_analog.c for the HP Elitebook 8530p (IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default. Playback and Capture confirmed working. Signed-off-by: NTravis Place <wishie@wishie.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Fix another silly bug in the amp cache list management. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 11月, 2008 1 次提交
-
-
由 Michel Marti 提交于
Added model=laptop for another HP machine (103c:3614) with AD1884A codec. Signed-off-by: NMichel Marti <mma@objectxp.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 11月, 2008 8 次提交
-
-
由 Takashi Iwai 提交于
BIOS on Dell Studio Desktop tells wrong codec probe masks. This patch gives the preset mask value to avoid invalid access. Reference: Novell bug#440907 https://bugzilla.novell.com/show_bug.cgi?id=440907Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The master switch doesn't influence on NID 0x15, the headphone jack on HP 3013 model because alc260_hp_master_update() ignores the passed arguments. Also, corrected the wrong arguments of hp3013 (0x10 and 0x15) although this doesn't change any behavior. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
The chaining for amp hash got broken due to the rewrite with snd_array. Fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a check for max allocation size in snd_array_new() for a debugging purpose. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing NULL check from allocator in get_alloc_hash(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based and uses an ALC269) is similar but not identical to the Lifebook S6410/E8410 (which are ICH8M-based and use an ALC262). It is named lifebook as fujitsu is in use for Amilo machines. This builds on the Quanta FL1 work and supports all analog inputs & outputs that I am aware of. Microphone autoswitch is implemented. The laptop mic port takes precedence over the dock mic port if both happen to have a jack plugged in. This made sense to me as a design decision (imagine a presentation environment with the dock fully wired in and the presenter quickly wanting to override the mic with a headset). There is mention of a digital audio path on the codec graph, so perhaps the headphone socket is dual-function analog/digital. I will follow up with another patch if I can acquire equipment to test this. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When an error occurs during the codec probing, typically accessing to an non-existing codec slot, the controller chip gets often screwed up and can no longer communicate with the codecs. This patch adds a preparation phase just to probe codec addresses before actually creating codec instances. If any error occurs during this probing phase, the driver resets the controller to recover. This will (hopefully) fix the famous "single_cmd" errors. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The hda_bus ops callback take struct hda_bus pointer. Also, the command callback takes the composed command word, instead of each small bits in arguments. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-