It is only used within skmsg.c so can become static.
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-8-xiyou.wangcong@gmail.com

It is only used within sock_map.c so can become static.
Suggested-by: NJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-7-xiyou.wangcong@gmail.com

These two eBPF programs are tied to BPF_SK_SKB_STREAM_PARSER
and BPF_SK_SKB_STREAM_VERDICT, rename them to reflect the fact
they are only used for TCP. And save the name 'skb_verdict' for
general use later.
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NLorenz Bauer <lmb@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-6-xiyou.wangcong@gmail.com

Currently TCP_SKB_CB() is hard-coded in skmsg code, it certainly
does not work for any other non-TCP protocols. We can move them to
skb ext, but it introduces a memory allocation on fast path.

Fortunately, we only need to a word-size to store all the information,
because the flags actually only contains 1 bit so can be just packed
into the lowest bit of the "pointer", which is stored as unsigned
long.

Inside struct sk_buff, '_skb_refdst' can be reused because skb dst is
no longer needed after ->sk_data_ready() so we can just drop it.
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-5-xiyou.wangcong@gmail.com

Currently, we compute ->data_end with a compile-time constant
offset of skb. But as Jakub pointed out, we can actually compute
it in eBPF JIT code at run-time, so that we can competely get
rid of ->data_end. This is similar to skb_shinfo(skb) computation
in bpf_convert_shinfo_access().
Suggested-by: NJakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-4-xiyou.wangcong@gmail.com

struct sk_psock_parser is embedded in sk_psock, it is
unnecessary as skb verdict also uses ->saved_data_ready.
We can simply fold these fields into sk_psock, and get rid
of ->enabled.
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-3-xiyou.wangcong@gmail.com

As suggested by John, clean up sockmap related Kconfigs:

Reduce the scope of CONFIG_BPF_STREAM_PARSER down to TCP stream
parser, to reflect its name.

Make the rest sockmap code simply depend on CONFIG_BPF_SYSCALL
and CONFIG_INET, the latter is still needed at this point because
of TCP/UDP proto update. And leave CONFIG_NET_SOCK_MSG untouched,
as it is used by non-sockmap cases.
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NLorenz Bauer <lmb@cloudflare.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NJakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210223184934.6054-2-xiyou.wangcong@gmail.com

BPF helpers bpf_task_storage_[get|delete] could hold two locks:
bpf_local_storage_map_bucket->lock and bpf_local_storage->lock. Calling
these helpers from fentry/fexit programs on functions in bpf_*_storage.c
may cause deadlock on either locks.

Prevent such deadlock with a per cpu counter, bpf_task_storage_busy. We
need this counter to be global, because the two locks here belong to two
different objects: bpf_local_storage_map and bpf_local_storage. If we
pick one of them as the owner of the counter, it is still possible to
trigger deadlock on the other lock. For example, if bpf_local_storage_map
owns the counters, it cannot prevent deadlock on bpf_local_storage->lock
when two maps are used.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210225234319.336131-3-songliubraving@fb.com

napi_frags_finish() and napi_skb_finish() can only be called inside
NAPI Rx context, so we can feed NAPI cache with skbuff_heads that
got NAPI_MERGED_FREE verdict instead of immediate freeing.
Replace __kfree_skb() with __kfree_skb_defer() in napi_skb_finish()
and move napi_skb_free_stolen_head() to skbuff.c, so it can drop skbs
to NAPI cache.
As many drivers call napi_alloc_skb()/napi_get_frags() on their
receive path, this becomes especially useful.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

{,__}napi_alloc_skb() is mostly used either for optional non-linear
receive methods (usually controlled via Ethtool private flags and off
by default) and/or for Rx copybreaks.
Use __napi_build_skb() here for obtaining skbuff_heads from NAPI cache
instead of inplace allocations. This includes both kmalloc and page
frag paths.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reuse the old and forgotten SKB_ALLOC_NAPI to add an option to get
an skbuff_head from the NAPI cache instead of inplace allocation
inside __alloc_skb().
This implies that the function is called from softirq or BH-off
context, not for allocating a clone or from a distant node.

Cc: Alexander Duyck <alexander.duyck@gmail.com> # Simplified flags check
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of just bulk-flushing skbuff_heads queued up through
napi_consume_skb() or __kfree_skb_defer(), try to reuse them
on allocation path.
If the cache is empty on allocation, bulk-allocate the first
16 elements, which is more efficient than per-skb allocation.
If the cache is full on freeing, bulk-wipe the second half of
the cache (32 elements).
This also includes custom KASAN poisoning/unpoisoning to be
double sure there are no use-after-free cases.

To not change current behaviour, introduce a new function,
napi_build_skb(), to optionally use a new approach later
in drivers.

Note on selected bulk size, 16:
 - this equals to XDP_BULK_QUEUE_SIZE, DEV_MAP_BULK_SIZE
   and especially VETH_XDP_BATCH, which is also used to
   bulk-allocate skbuff_heads and was tested on powerful
   setups;
 - this also showed the best performance in the actual
   test series (from the array of {8, 16, 32}).

Suggested-by: Edward Cree <ecree.xilinx@gmail.com> # Divide on two halves
Suggested-by: Eric Dumazet <edumazet@google.com>   # KASAN poisoning
Cc: Dmitry Vyukov <dvyukov@google.com>             # Help with KASAN
Cc: Paolo Abeni <pabeni@redhat.com>                # Reduced batch size
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NAPI cache structures will be used for allocating skbuff_heads,
so move their declarations a bit upper.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function isn't much needed as NAPI skb queue gets bulk-freed
anyway when there's no more room, and even may reduce the efficiency
of bulk operations.
It will be even less needed after reusing skb cache on allocation path,
so remove it and this way lighten network softirqs a bit.
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just call __build_skb_around() instead of open-coding it.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use unlikely() annotations for skbuff_head and data similarly to the
two other allocation functions and remove totally redundant goto.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__build_skb_around() can never fail and always returns passed skb.
Make it return void to simplify and optimize the code.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eversince the introduction of __kmalloc_reserve(), "ip" argument
hasn't been used. _RET_IP_ is embedded inside
kmalloc_node_track_caller().
Remove the redundant macro and rename the function after it.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation before reusing several functions in all three skb
allocation variants, move __alloc_skb() next to the
__netdev_alloc_skb() and __napi_alloc_skb().
No functional changes.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the following command:

 # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
   $tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop

doesn't drop all IPv4 packets that match the configured TTL / destination
address. In particular, if "fragment offset" or "more fragments" have non
zero value in the IPv4 header, setting of FLOW_DISSECTOR_KEY_IP is simply
ignored. Fix this dissecting IPv4 TTL and TOS before fragment info; while
at it, add a selftest for tc flower's match on 'ip_ttl' that verifies the
correct behavior.

Fixes: 518d8a2e ("net/flow_dissector: add support for dissection of misc ip header fields")
Reported-by: NShuang Li <shuali@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use-case for dropping the MTU check when TC-BPF does redirect to
ingress, is described by Eyal Birger in email[0]. The summary is the
ability to increase packet size (e.g. with IPv6 headers for NAT64) and
ingress redirect packet and let normal netstack fragment packet as needed.

[0] https://lore.kernel.org/netdev/CAHsH6Gug-hsLGHQ6N0wtixdOa85LDZ3HNRHVd0opR=19Qo4W4Q@mail.gmail.com/

V15:
 - missing static for function declaration

V9:
 - Make net_device "up" (IFF_UP) check explicit in skb_do_redirect

V4:
 - Keep net_device "up" (IFF_UP) check.
 - Adjustment to handle bpf_redirect_peer() helper
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790971.790810.11785274340154740591.stgit@firesoul

This BPF-helper bpf_check_mtu() works for both XDP and TC-BPF programs.

The SKB object is complex and the skb->len value (accessible from
BPF-prog) also include the length of any extra GRO/GSO segments, but
without taking into account that these GRO/GSO segments get added
transport (L4) and network (L3) headers before being transmitted. Thus,
this BPF-helper is created such that the BPF-programmer don't need to
handle these details in the BPF-prog.

The API is designed to help the BPF-programmer, that want to do packet
context size changes, which involves other helpers. These other helpers
usually does a delta size adjustment. This helper also support a delta
size (len_diff), which allow BPF-programmer to reuse arguments needed by
these other helpers, and perform the MTU check prior to doing any actual
size adjustment of the packet context.

It is on purpose, that we allow the len adjustment to become a negative
result, that will pass the MTU check. This might seem weird, but it's not
this helpers responsibility to "catch" wrong len_diff adjustments. Other
helpers will take care of these checks, if BPF-programmer chooses to do
actual size adjustment.

V14:
 - Improve man-page desc of len_diff.

V13:
 - Enforce flag BPF_MTU_CHK_SEGS cannot use len_diff.

V12:
 - Simplify segment check that calls skb_gso_validate_network_len.
 - Helpers should return long

V9:
- Use dev->hard_header_len (instead of ETH_HLEN)
- Annotate with unlikely req from Daniel
- Fix logic error using skb_gso_validate_network_len from Daniel

V6:
- Took John's advice and dropped BPF_MTU_CHK_RELAX
- Returned MTU is kept at L3-level (like fib_lookup)

V4: Lot of changes
 - ifindex 0 now use current netdev for MTU lookup
 - rename helper from bpf_mtu_check to bpf_check_mtu
 - fix bug for GSO pkt length (as skb->len is total len)
 - remove __bpf_len_adj_positive, simply allow negative len adj
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287790461.790810.3429728639563297353.stgit@firesoul

The BPF-helpers for FIB lookup (bpf_xdp_fib_lookup and bpf_skb_fib_lookup)
can perform MTU check and return BPF_FIB_LKUP_RET_FRAG_NEEDED. The BPF-prog
don't know the MTU value that caused this rejection.

If the BPF-prog wants to implement PMTU (Path MTU Discovery) (rfc1191) it
need to know this MTU value for the ICMP packet.

Patch change lookup and result struct bpf_fib_lookup, to contain this MTU
value as output via a union with 'tot_len' as this is the value used for
the MTU lookup.

V5:
 - Fixed uninit value spotted by Dan Carpenter.
 - Name struct output member mtu_result
Reported-by: Nkernel test robot <lkp@intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287789952.790810.13134700381067698781.stgit@firesoul

BPF end-user on Cilium slack-channel (Carlo Carraro) wants to use
bpf_fib_lookup for doing MTU-check, but *prior* to extending packet size,
by adjusting fib_params 'tot_len' with the packet length plus the expected
encap size. (Just like the bpf_check_mtu helper supports). He discovered
that for SKB ctx the param->tot_len was not used, instead skb->len was used
(via MTU check in is_skb_forwardable() that checks against netdev MTU).

Fix this by using fib_params 'tot_len' for MTU check. If not provided (e.g.
zero) then keep existing TC behaviour intact. Notice that 'tot_len' for MTU
check is done like XDP code-path, which checks against FIB-dst MTU.

V16:
- Revert V13 optimization, 2nd lookup is against egress/resulting netdev

V13:
- Only do ifindex lookup one time, calling dev_get_by_index_rcu().

V10:
- Use same method as XDP for 'tot_len' MTU check

Fixes: 4c79579b ("bpf: Change bpf_fib_lookup to return lookup status")
Reported-by: NCarlo Carraro <colrack@gmail.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/161287789444.790810.15247494756551413508.stgit@firesoul

Multiple BPF-helpers that can manipulate/increase the size of the SKB uses
__bpf_skb_max_len() as the max-length. This function limit size against
the current net_device MTU (skb->dev->mtu).

When a BPF-prog grow the packet size, then it should not be limited to the
MTU. The MTU is a transmit limitation, and software receiving this packet
should be allowed to increase the size. Further more, current MTU check in
__bpf_skb_max_len uses the MTU from ingress/current net_device, which in
case of redirects uses the wrong net_device.

This patch keeps a sanity max limit of SKB_MAX_ALLOC (16KiB). The real limit
is elsewhere in the system. Jesper's testing[1] showed it was not possible
to exceed 8KiB when expanding the SKB size via BPF-helper. The limiting
factor is the define KMALLOC_MAX_CACHE_SIZE which is 8192 for
SLUB-allocator (CONFIG_SLUB) in-case PAGE_SIZE is 4096. This define is
in-effect due to this being called from softirq context see code
__gfp_pfmemalloc_flags() and __do_kmalloc_node(). Jakub's testing showed
that frames above 16KiB can cause NICs to reset (but not crash). Keep this
sanity limit at this level as memory layer can differ based on kernel
config.

[1] https://github.com/xdp-project/bpf-examples/tree/master/MTU-testsSigned-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287788936.790810.2937823995775097177.stgit@firesoul

Use a new config SOCK_RX_QUEUE_MAPPING to compile-in the socket
RX queue field and logic, instead of the XPS config.
This breaks dependency in XPS, and allows selecting it from non-XPS
use cases, as we do in the next patch.

In addition, use the new flag to wrap the logic in sk_rx_queue_get()
and protect access to the sk_rx_queue_mapping field, while keeping
the function exposed unconditionally, just like sk_rx_queue_set()
and sk_rx_queue_clear().
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:

Thread 1			Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
				// dev_ifsioc_locked()
				memcpy(ifr->ifr_hwaddr.sa_data,
					dev->dev_addr,...);

Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.

Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.

Fixes: 3710becf ("net: RCU locking for simple ioctl()")
Reported-by: N"Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: NCong Wang <cong.wang@bytedance.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This needs a new helper that:
- can work in a sleepable context (using sock_gen_cookie)
- takes a struct sock pointer and checks that it's not NULL
Signed-off-by: NFlorent Revest <revest@chromium.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NKP Singh <kpsingh@kernel.org>
Acked-by: NAndrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org

It is simpler to make net->net_cookie a plain u64
written once in setup_net() instead of looping
and using atomic64 helpers.

Lorenz Bauer wants to add SO_NETNS_COOKIE socket option
and this patch would makes his patch series simpler.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Tested-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new sysfs attribute to the network device class.
Said attribute provides a per-device control to enable/disable the
threaded mode for all the napi instances of the given network device,
without the need for a device up/down.
User sets it to 1 or 0 to enable or disable threaded mode.
Note: when switching between threaded and the current softirq based mode
for a napi instance, it will not immediately take effect if the napi is
currently being polled. The mode switch will happen for the next time
napi_schedule() is called.
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Co-developed-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NWei Wang <weiwan@google.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows running each napi poll loop inside its own
kernel thread.
The kthread is created during netif_napi_add() if dev->threaded
is set. And threaded mode is enabled in napi_enable(). We will
provide a way to set dev->threaded and enable threaded mode
without a device up/down in the following patch.

Once that threaded mode is enabled and the kthread is
started, napi_schedule() will wake-up such thread instead
of scheduling the softirq.

The threaded poll loop behaves quite likely the net_rx_action,
but it does not have to manipulate local irqs and uses
an explicit scheduling point based on netdev_budget.
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Co-developed-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Co-developed-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NWei Wang <weiwan@google.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit introduces a new function __napi_poll() which does the main
logic of the existing napi_poll() function, and will be called by other
functions in later commits.
This idea and implementation is done by Felix Fietkau <nbd@nbd.name> and
is proposed as part of the patch to move napi work to work_queue
context.
This commit by itself is a code restructure.
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NWei Wang <weiwan@google.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to access the suboordinate dev for a device we should be holding
the rtnl_lock when outside of the transmit path. The existing code was not
doing that for the sysfs dump function and as a result we were open to a
possible race.

To resolve that take the rtnl lock prior to accessing the sb_dev field of
the Tx queue and release it after we have retrieved the tc for the queue.
Signed-off-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 1532b977.

The above commit is good and it works, however it was meant as a bugfix
for stable kernels and now we have more self-contained ways in DSA to
handle the situation where the DSA master must be brought up.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In the current implementation of {netdev,napi}_alloc_frag(), it doesn't
have any align guarantee for the returned buffer address, But for some
hardwares they do require the DMA buffer to be aligned correctly,
so we would have to use some workarounds like below if the buffers
allocated by the {netdev,napi}_alloc_frag() are used by these hardwares
for DMA.
    buf = napi_alloc_frag(really_needed_size + align);
    buf = PTR_ALIGN(buf, align);

These codes seems ugly and would waste a lot of memories if the buffers
are used in a network driver for the TX/RX. We have added the align
support for the page_frag functions, so add the corresponding
{netdev,napi}_frag functions.
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Commit c8079432 ("net: Fix packet reordering caused by GRO and
listified RX cooperation") had the unfortunate effect of adding
latencies in common workloads.

Before the patch, GRO packets were immediately passed to
upper stacks.

After the patch, we can accumulate quite a lot of GRO
packets (depdending on NAPI budget).

My fix is counting in napi->rx_count number of segments
instead of number of logical packets.

Fixes: c8079432 ("net: Fix packet reordering caused by GRO and listified RX cooperation")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Bisected-by: NJohn Sperbeck <jsperbeck@google.com>
Tested-by: NJian Yang <jianyang@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: NSaeed Mahameed <saeedm@nvidia.com>
Reviewed-by: NEdward Cree <ecree.xilinx@gmail.com>
Reviewed-by: NAlexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/20210204213146.4192368-1-eric.dumazet@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

When iteratively computing a checksum with csum_block_add, track the
offset "pos" to correctly rotate in csum_block_add when offset is odd.

The open coded implementation of skb_copy_and_csum_datagram did this.
With the switch to __skb_datagram_iter calling csum_and_copy_to_iter,
pos was reinitialized to 0 on each call.

Bring back the pos by passing it along with the csum to the callback.

Changes v1->v2
  - pass csum value, instead of csump pointer (Alexander Duyck)

Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/
Fixes: 950fcaec ("datagram: consolidate datagram copy to iter helpers")
Reported-by: NOliver Graute <oliver.graute@gmail.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Fir the following compilation warnings:
 1031 | INDIRECT_CALLABLE_SCOPE void udp_v6_early_demux(struct sk_buff *skb)

net/ipv6/ip6_offload.c:182:41: warning: no previous prototype for ‘ipv6_gro_receive’ [-Wmissing-prototypes]
  182 | INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head,
      |                                         ^~~~~~~~~~~~~~~~
net/ipv6/ip6_offload.c:320:29: warning: no previous prototype for ‘ipv6_gro_complete’ [-Wmissing-prototypes]
  320 | INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff)
      |                             ^~~~~~~~~~~~~~~~~
net/ipv6/ip6_offload.c:182:41: warning: no previous prototype for ‘ipv6_gro_receive’ [-Wmissing-prototypes]
  182 | INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head,
      |                                         ^~~~~~~~~~~~~~~~
net/ipv6/ip6_offload.c:320:29: warning: no previous prototype for ‘ipv6_gro_complete’ [-Wmissing-prototypes]
  320 | INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff)
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

pool_page_reusable() is a leftover from pre-NUMA-aware times. For now,
this function is just a redundant wrapper over page_is_pfmemalloc(),
so inline it into its sole call site.
Signed-off-by: NAlexander Lobakin <alobakin@pm.me>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Split ndo_xdp_xmit and ndo_start_xmit use cases in veth_xdp_rcv routine
in order to alloc skbs in bulk for XDP_PASS verdict.

Introduce xdp_alloc_skb_bulk utility routine to alloc skb bulk list.
The proposed approach has been tested in the following scenario:

eth (ixgbe) --> XDP_REDIRECT --> veth0 --> (remote-ns) veth1 --> XDP_PASS

XDP_REDIRECT: xdp_redirect_map bpf sample
XDP_PASS: xdp_rxq_info bpf sample

traffic generator: pkt_gen sending udp traffic on a remote device

bpf-next master: ~3.64Mpps
bpf-next + skb bulking allocation: ~3.79Mpps
Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NToshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/a14a30d3c06fff24e13f836c733d80efc0bd6eb5.1611957532.git.lorenzo@kernel.org