We don't need pmu->pebs_no_xmm_regs anymore, the capabilities
PERF_PMU_CAP_EXTENDED_REGS can be used to check if XMM registers
collection is supported.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-4-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Use generic macro PERF_REG_EXTENDED_MASK to replace PEBS_XMM_REGS to
avoid duplication.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-3-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On Intel Westmere, a cmdline as follows:

  $ perf record -e cpu/event=0xc4,umask=0x2,name=br_inst_retired.near_call/p ....

was failing. Yet the event+ umask support PEBS.

It turns out this is due to a bug in the the PEBS event constraint table for
westmere. All forms of BR_INST_RETIRED.* support PEBS. Therefore the constraint
mask should ignore the umask. The name of the macro INTEL_FLAGS_EVENT_CONSTRAINT()
hint that this is the case but it was not. That macros was checking both the
event code and event umask. Therefore, it was only matching on 0x00c4.
There are code+umask macros, they all have *UEVENT*.

This bug fixes the issue by checking only the event code in the mask.
Both single and range version are modified.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/20190509214556.123493-1-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add Icelake core PMU perf code, including constraint tables and the main
enable code.

Icelake expanded the generic counters to always 8 even with HT on, but a
range of events cannot be scheduled on the extra 4 counters.
Add new constraint ranges to describe this to the scheduler.
The number of constraints that need to be checked is larger now than
with earlier CPUs.
At some point we may need a new data structure to look them up more
efficiently than with linear search. So far it still seems to be
acceptable however.

Icelake added a new fixed counter SLOTS. Full support for it is added
later in the patch series.

The cache events table is identical to Skylake.

Compare to PEBS instruction event on generic counter, fixed counter 0
has less skid. Force instruction:ppp always in fixed counter 0.
Originally-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-9-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Icelake extended the general counters to 8, even when SMT is enabled.
However only a (large) subset of the events can be used on all 8
counters.

The events that can or cannot be used on all counters are organized
in ranges.

A lot of scheduler constraints are required to handle all this.

To avoid blowing up the tables add event code ranges to the constraint
tables, and a new inline function to match them.
Originally-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> # developer hat on
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> # maintainer hat on
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-8-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

With adaptive PEBS the CPU can directly supply the LBR information,
so we don't need to read it again. But the LBRs still need to be
enabled. Add a special count to the cpuc that distinguishes these
two cases, and avoid reading the LBRs unnecessarily when PEBS is
active.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-7-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Adaptive PEBS is a new way to report PEBS sampling information. Instead
of a fixed size record for all PEBS events it allows to configure the
PEBS record to only include the information needed. Events can then opt
in to use such an extended record, or stay with a basic record which
only contains the IP.

The major new feature is to support LBRs in PEBS record.
Besides normal LBR, this allows (much faster) large PEBS, while still
supporting callstacks through callstack LBR. So essentially a lot of
profiling can now be done without frequent interrupts, dropping the
overhead significantly.

The main requirement still is to use a period, and not use frequency
mode, because frequency mode requires reevaluating the frequency on each
overflow.

The floating point state (XMM) is also supported, which allows efficient
profiling of FP function arguments.

Introduce specific drain function to handle variable length records.
Use a new callback to parse the new record format, and also handle the
STATUS field now being at a different offset.

Add code to set up the configuration register. Since there is only a
single register, all events either get the full super set of all events,
or only the basic record.
Originally-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-6-kan.liang@linux.intel.com
[ Renamed GPRS => GP. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Starting from Icelake, XMM registers can be collected in PEBS record.
But current code only output the pt_regs.

Add a new struct x86_perf_regs for both pt_regs and xmm_regs. The
xmm_regs will be used later to keep a pointer to PEBS record which has
XMM information.

XMM registers are 128 bit. To simplify the code, they are handled like
two different registers, which means setting two bits in the register
bitmap. This also allows only sampling the lower 64bit bits in XMM.

The index of XMM registers starts from 32. There are 16 XMM registers.
So all reserved space for regs are used. Remove REG_RESERVED.

Add PERF_REG_X86_XMM_MAX, which stands for the max number of all x86
regs including both GPRs and XMM.

Add REG_NOSUPPORT for 32bit to exclude unsupported registers.

Previous platforms can not collect XMM information in PEBS record.
Adding pebs_no_xmm_regs to indicate the unsupported platforms.

The common code still validates the supported registers. However, it
cannot check model specific registers, e.g. XMM. Add extra check in
x86_pmu_hw_config() to reject invalid config of regs_user and regs_intr.
The regs_user never supports XMM collection.
The regs_intr only supports XMM collection when sampling PEBS event on
icelake and later platforms.
Originally-by: NAndi Kleen <ak@linux.intel.com>
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-3-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch provides guarantee to the sysadmin that when TFA is disabled, no PMU
event is using PMC3 when the echo command returns. Vice-Versa, when TFA
is enabled, PMU can use PMC3 immediately (to eliminate possible multiplexing).

  $ perf stat -a -I 1000 --no-merge -e branches,branches,branches,branches
     1.000123979    125,768,725,208      branches
     1.000562520    125,631,000,456      branches
     1.000942898    125,487,114,291      branches
     1.001333316    125,323,363,620      branches
     2.004721306    125,514,968,546      branches
     2.005114560    125,511,110,861      branches
     2.005482722    125,510,132,724      branches
     2.005851245    125,508,967,086      branches
     3.006323475    125,166,570,648      branches
     3.006709247    125,165,650,056      branches
     3.007086605    125,164,639,142      branches
     3.007459298    125,164,402,912      branches
     4.007922698    125,045,577,140      branches
     4.008310775    125,046,804,324      branches
     4.008670814    125,048,265,111      branches
     4.009039251    125,048,677,611      branches
     5.009503373    125,122,240,217      branches
     5.009897067    125,122,450,517      branches

Then on another connection, sysadmin does:

  $ echo  1 >/sys/devices/cpu/allow_tsx_force_abort

Then perf stat adjusts the events immediately:

     5.010286029    125,121,393,483      branches
     5.010646308    125,120,556,786      branches
     6.011113588    124,963,351,832      branches
     6.011510331    124,964,267,566      branches
     6.011889913    124,964,829,130      branches
     6.012262996    124,965,841,156      branches
     7.012708299    124,419,832,234      branches [79.69%]
     7.012847908    124,416,363,853      branches [79.73%]
     7.013225462    124,400,723,712      branches [79.73%]
     7.013598191    124,376,154,434      branches [79.70%]
     8.014089834    124,250,862,693      branches [74.98%]
     8.014481363    124,267,539,139      branches [74.94%]
     8.014856006    124,259,519,786      branches [74.98%]
     8.014980848    124,225,457,969      branches [75.04%]
     9.015464576    124,204,235,423      branches [75.03%]
     9.015858587    124,204,988,490      branches [75.04%]
     9.016243680    124,220,092,486      branches [74.99%]
     9.016620104    124,231,260,146      branches [74.94%]

And vice-versa if the syadmin does:

  $ echo  0 >/sys/devices/cpu/allow_tsx_force_abort

Events are again spread over the 4 counters:

    10.017096277    124,276,230,565      branches [74.96%]
    10.017237209    124,228,062,171      branches [75.03%]
    10.017478637    124,178,780,626      branches [75.03%]
    10.017853402    124,198,316,177      branches [75.03%]
    11.018334423    124,602,418,933      branches [85.40%]
    11.018722584    124,602,921,320      branches [85.42%]
    11.019095621    124,603,956,093      branches [85.42%]
    11.019467742    124,595,273,783      branches [85.42%]
    12.019945736    125,110,114,864      branches
    12.020330764    125,109,334,472      branches
    12.020688740    125,109,818,865      branches
    12.021054020    125,108,594,014      branches
    13.021516774    125,109,164,018      branches
    13.021903640    125,108,794,510      branches
    13.022270770    125,107,756,978      branches
    13.022630819    125,109,380,471      branches
    14.023114989    125,133,140,817      branches
    14.023501880    125,133,785,858      branches
    14.023868339    125,133,852,700      branches
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Cc: nelson.dsouza@intel.com
Cc: tonyj@suse.com
Link: https://lkml.kernel.org/r/20190408173252.37932-3-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

PEBS_REGS used as mask for the supported registers for large PEBS.
However, the mask cannot filter the sample_regs_user/sample_regs_intr
correctly.

(1ULL << PERF_REG_X86_*) should be used to replace PERF_REG_X86_*, which
is only the index.

Rename PEBS_REGS to PEBS_GP_REGS, because the mask is only for general
purpose registers.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Fixes: 2fe1bc1f ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Link: https://lkml.kernel.org/r/20190402194509.2832-2-kan.liang@linux.intel.com
[ Renamed it to PEBS_GP_REGS - as 'GPRS' is used elsewhere ;-) ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The flag PERF_X86_EVENT_COMMITTED is used to find uncommitted events
for which to call put_event_constraint() when scheduling fails.

These are the newly added events to the list, and must form, per
definition, the tail of cpuc->event_list[]. By computing the list
index of the last successfull schedule, then iteration can start there
and the flag is redundant.

There are only 3 callers of x86_schedule_events(), notably:

 - x86_pmu_add()
 - x86_pmu_commit_txn()
 - validate_group()

For x86_pmu_add(), cpuc->n_events isn't updated until after
schedule_events() succeeds, therefore cpuc->n_events points to the
desired index.

For x86_pmu_commit_txn(), cpuc->n_events is updated, but we can
trivially compute the desired value with cpuc->n_txn -- the number of
events added in this transaction.

For validate_group(), we can make the rule for x86_pmu_add() work by
simply setting cpuc->n_events to 0 before calling schedule_events().
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NStephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Guenter reported a build warning for CONFIG_CPU_SUP_INTEL=n:

  > With allmodconfig-CONFIG_CPU_SUP_INTEL, this patch results in:
  >
  > In file included from arch/x86/events/amd/core.c:8:0:
  > arch/x86/events/amd/../perf_event.h:1036:45: warning: ‘struct cpu_hw_event’ declared inside parameter list will not be visible outside of this definition or declaration
  >  static inline int intel_cpuc_prepare(struct cpu_hw_event *cpuc, int cpu)

While harmless (an unsed pointer is an unused pointer, no matter the type)
it needs fixing.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: d01b1f96 ("perf/x86/intel: Make cpuc allocations consistent")
Link: http://lkml.kernel.org/r/20190315081410.GR5996@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Skylake (and later) will receive a microcode update to address a TSX
errata. This microcode will, on execution of a TSX instruction
(speculative or not) use (clobber) PMC3. This update will also provide
a new MSR to change this behaviour along with a CPUID bit to enumerate
the presence of this new MSR.

When the MSR gets set; the microcode will no longer use PMC3 but will
Force Abort every TSX transaction (upon executing COMMIT).

When TSX Force Abort (TFA) is allowed (default); the MSR gets set when
PMC3 gets scheduled and cleared when, after scheduling, PMC3 is
unused.

When TFA is not allowed; clear PMC3 from all constraints such that it
will not get used.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The cpuc data structure allocation is different between fake and real
cpuc's; use the same code to init/free both.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Vince (and later on Ravi) reported crashes in the BTS code during
fuzzing with the following backtrace:

  general protection fault: 0000 [#1] SMP PTI
  ...
  RIP: 0010:perf_prepare_sample+0x8f/0x510
  ...
  Call Trace:
   <IRQ>
   ? intel_pmu_drain_bts_buffer+0x194/0x230
   intel_pmu_drain_bts_buffer+0x160/0x230
   ? tick_nohz_irq_exit+0x31/0x40
   ? smp_call_function_single_interrupt+0x48/0xe0
   ? call_function_single_interrupt+0xf/0x20
   ? call_function_single_interrupt+0xa/0x20
   ? x86_schedule_events+0x1a0/0x2f0
   ? x86_pmu_commit_txn+0xb4/0x100
   ? find_busiest_group+0x47/0x5d0
   ? perf_event_set_state.part.42+0x12/0x50
   ? perf_mux_hrtimer_restart+0x40/0xb0
   intel_pmu_disable_event+0xae/0x100
   ? intel_pmu_disable_event+0xae/0x100
   x86_pmu_stop+0x7a/0xb0
   x86_pmu_del+0x57/0x120
   event_sched_out.isra.101+0x83/0x180
   group_sched_out.part.103+0x57/0xe0
   ctx_sched_out+0x188/0x240
   ctx_resched+0xa8/0xd0
   __perf_event_enable+0x193/0x1e0
   event_function+0x8e/0xc0
   remote_function+0x41/0x50
   flush_smp_call_function_queue+0x68/0x100
   generic_smp_call_function_single_interrupt+0x13/0x30
   smp_call_function_single_interrupt+0x3e/0xe0
   call_function_single_interrupt+0xf/0x20
   </IRQ>

The reason is that while event init code does several checks
for BTS events and prevents several unwanted config bits for
BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows
to create BTS event without those checks being done.

Following sequence will cause the crash:

If we create an 'almost' BTS event with precise_ip and callchains,
and it into a BTS event it will crash the perf_prepare_sample()
function because precise_ip events are expected to come
in with callchain data initialized, but that's not the
case for intel_pmu_drain_bts_buffer() caller.

Adding a check_period callback to be called before the period
is changed via PERF_EVENT_IOC_PERIOD. It will deny the change
if the event would become BTS. Plus adding also the limit_period
check as well.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190204123532.GA4794@kravaSigned-off-by: NIngo Molnar <mingo@kernel.org>

KVM added a workaround for PEBS events leaking into guests with
commit:

  26a4f3c0 ("perf/x86: disable PEBS on a guest entry.")

This uses the VT entry/exit list to add an extra disable of the
PEBS_ENABLE MSR.

Intel also added a fix for this issue to microcode updates on
Haswell/Broadwell/Skylake.

It turns out using the MSR entry/exit list makes VM exits
significantly slower. The list is only needed for disabling
PEBS, because the GLOBAL_CTRL change gets optimized by
KVM into changing the VMCS.

Check for the microcode updates that have the microcode
fix for leaking PEBS, and disable the extra entry/exit list
entry for PEBS_ENABLE. In addition we always clear the
GLOBAL_CTRL for the PEBS counter while running in the guest,
which is enough to make them never fire at the wrong
side of the host/guest transition.

The overhead for VM exits with the filtering active with the patch is
reduced from 8% to 4%.

The microcode patch has already been merged into future platforms.
This patch is one-off thing. The quirks is used here.

For other old platforms which doesn't have microcode patch and quirks,
extra disable of the PEBS_ENABLE MSR is still required.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@alien8.de
Link: https://lkml.kernel.org/r/1549319013-4522-2-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently we check the branch tracing only by checking for the
PERF_COUNT_HW_BRANCH_INSTRUCTIONS event of PERF_TYPE_HARDWARE
type. But we can define the same event with the PERF_TYPE_RAW
type.

Changing the intel_pmu_has_bts() code to check on event's final
hw config value, so both HW types are covered.

Adding unlikely to intel_pmu_has_bts() condition calls, because
it was used in the original code in intel_bts_constraints.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181121101612.16272-2-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Implements counter freezing for Arch Perfmon v4 (Skylake and
newer). This allows to speed up the PMI handler by avoiding
unnecessary MSR writes and make it more accurate.

The Arch Perfmon v4 PMI handler is substantially different than
the older PMI handler.

Differences to the old handler:

- It relies on counter freezing, which eliminates several MSR
  writes from the PMI handler and lowers the overhead significantly.

  It makes the PMI handler more accurate, as all counters get
  frozen atomically as soon as any counter overflows. So there is
  much less counting of the PMI handler itself.

  With the freezing we don't need to disable or enable counters or
  PEBS. Only BTS which does not support auto-freezing still needs to
  be explicitly managed.

- The PMU acking is done at the end, not the beginning.
  This makes it possible to avoid manual enabling/disabling
  of the PMU, instead we just rely on the freezing/acking.

- The APIC is acked before reenabling the PMU, which avoids
  problems with LBRs occasionally not getting unfreezed on Skylake.

- Looping is only needed to workaround a corner case which several PMIs
  are very close to each other. For common cases, the counters are freezed
  during PMI handler. It doesn't need to do re-check.

This patch:

- Adds code to enable v4 counter freezing
- Fork <=v3 and >=v4 PMI handlers into separate functions.
- Add kernel parameter to disable counter freezing. It took some time to
  debug counter freezing, so in case there are new problems we added an
  option to turn it off. Would not expect this to be used until there
  are new bugs.
- Only for big core. The patch for small core will be posted later
  separately.

Performance:

When profiling a kernel build on Kabylake with different perf options,
measuring the length of all NMI handlers using the nmi handler
trace point:

V3 is without counter freezing.
V4 is with counter freezing.
The value is the average cost of the PMI handler.
(lower is better)

perf options    `           V3(ns) V4(ns)  delta
-c 100000                   1088   894     -18%
-g -c 100000                1862   1646    -12%
--call-graph lbr -c 100000  3649   3367    -8%
--c.g. dwarf -c 100000      2248   1982    -12%
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1533712328-2834-2-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The Extended PEBS feature, introduced in the Goldmont Plus
microarchitecture, supports all events as "Extended PEBS".

Introduce flag PMU_FL_PEBS_ALL to indicate the platforms which support
extended PEBS.

To support all events, it needs to support all constraints for PEBS. To
avoid duplicating all the constraints in the PEBS table, making the PEBS
code search the normal constraints too.

Based-on-code-from: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/20180309021542.11374-1-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Context switches with perf LBR call stack context are fairly expensive
because they do a lot of MSR writes. Currently we unconditionally do the
expensive operation when LBR call stack is enabled. It's not necessary
for some common cases, e.g task -> other kernel thread -> same task.
The LBR registers are not changed, hence they don't need to be
rewritten/restored.

Introduce per-CPU variables to track the last LBR call stack context.
If the same context is scheduled in, the rewrite/restore is not
required, with the following two exceptions:

 - The LBR registers may be modified by a normal LBR event, i.e., adding
   a new LBR event or scheduling an existing LBR event. In both cases,
   the LBR registers are reset first. The last LBR call stack information
   is cleared in intel_pmu_lbr_reset(). Restoring the LBR registers is
   required.

 - The LBR registers are initialized to zero in C6.
   If the LBR registers which TOS points is cleared, C6 must be entered
   while swapped out. Restoring the LBR registers is required as well.

These exceptions are not common.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lore.kernel.org/lkml/1528213126-4312-2-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

LBR has a limited stack size. If a task has a deeper call stack than
LBR's stack size, only the overflowed part is reported. A complete call
stack may not be reconstructed by perf tool.

Current code doesn't access all LBR registers. It only read the ones
below the TOS. The LBR registers above the TOS will be discarded
unconditionally.

When a CALL is captured, the TOS is incremented by 1 , modulo max LBR
stack size. The LBR HW only records the call stack information to the
register which the TOS points to. It will not touch other LBR
registers. So the registers above the TOS probably still store the valid
call stack information for an overflowed call stack, which need to be
reported.

To retrieve complete call stack information, we need to start from TOS,
read all LBR registers until an invalid entry is detected.
0s can be used to detect the invalid entry, because:

 - When a RET is captured, the HW zeros the LBR register which TOS points
   to, then decreases the TOS.
 - The LBR registers are reset to 0 when adding a new LBR event or
   scheduling an existing LBR event.
 - A taken branch at IP 0 is not expected

The context switch code is also modified to save/restore all valid LBR
registers. Furthermore, the LBR registers, which don't have valid call
stack information, need to be reset in restore, because they may be
polluted while swapped out.

Here is a small test program, tchain_deep.
Its call stack is deeper than 32.

 noinline void f33(void)
 {
        int i;

        for (i = 0; i < 10000000;) {
                if (i%2)
                        i++;
                else
                        i++;
        }
 }

 noinline void f32(void)
 {
        f33();
 }

 noinline void f31(void)
 {
        f32();
 }

 ... ...

 noinline void f1(void)
 {
        f2();
 }

 int main()
 {
        f1();
 }

Here is the test result on SKX. The max stack size of SKX is 32.

Without the patch:

 $ perf record -e cycles --call-graph lbr -- ./tchain_deep
 $ perf report --stdio
 #
 # Children      Self  Command      Shared Object     Symbol
 # ........  ........  ...........  ................  .................
 #
   100.00%    99.99%  tchain_deep    tchain_deep       [.] f33
            |
             --99.99%--f30
                       f31
                       f32
                       f33

With the patch:

 $ perf record -e cycles --call-graph lbr -- ./tchain_deep
 $ perf report --stdio
 # Children      Self  Command      Shared Object     Symbol
 # ........  ........  ...........  ................  ..................
 #
    99.99%     0.00%  tchain_deep    tchain_deep       [.] f1
            |
            ---f1
               f2
               f3
               f4
               f5
               f6
               f7
               f8
               f9
               f10
               f11
               f12
               f13
               f14
               f15
               f16
               f17
               f18
               f19
               f20
               f21
               f22
               f23
               f24
               f25
               f26
               f27
               f28
               f29
               f30
               f31
               f32
               f33
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Link: https://lore.kernel.org/lkml/1528213126-4312-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The 'freerunning PEBS' and 'large PEBS' are the same thing. Both of these
names appear in the code and in the API, which causes confusion.

Rename 'freerunning PEBS' to 'large PEBS' to unify the code,
which eliminates the confusion.

No functional change.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1520865937-22910-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

perf/x86/intel/ds: Introduce ->read() function for auto-reload events and flush the PEBS buffer there

There is no way to get exact auto-reload times and values which are needed
for event updates unless we flush the PEBS buffer.

Introduce intel_pmu_auto_reload_read() to drain the PEBS buffer for
auto reload event. To prevent races with the hardware, we can only
call drain_pebs() when the PMU is disabled.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1518474035-21006-4-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Auto-reload needs to be specially handled when reading event counts.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1518474035-21006-3-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Large fixed period values could be truncated on Broadwell, for example:

  perf record -e cycles -c 10000000000

Here the fixed period is 0x2540BE400, but the period which finally applied is
0x540BE400 - which is wrong.

The reason is that x86_pmu::limit_period() uses an u32 parameter, so the
high 32 bits of 'period' get truncated.

This bug was introduced in:

  commit 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")

It's safe to use u64 instead of u32:

 - Although the 'left' is s64, the value of 'left' must be positive when
   calling limit_period().

 - bdw_limit_period() only modifies the lowest 6 bits, it doesn't touch
   the higher 32 bits.
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 294fe0f5 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/1519926894-3520-1-git-send-email-kan.liang@linux.intel.com
[ Rewrote unacceptably bad changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Stephane reported that we don't support period for enabling large PEBS
data, which there's no reason for. Adding PERF_SAMPLE_PERIOD into
freerunning flags.

Tested it with:

  # perf record -e cycles:P -c 100 --no-timestamp -C 0 --period
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NKan Liang <kan.liang@intel.com>
Tested-by: NStephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180201083812.11359-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The BTS and PEBS buffers both have their virtual addresses programmed into
the hardware.  This means that any access to them is performed via the page
tables.  The times that the hardware accesses these are entirely dependent
on how the performance monitoring hardware events are set up.  In other
words, there is no way for the kernel to tell when the hardware might
access these buffers.

To avoid perf crashes, place 'debug_store' allocate pages and map them into
the cpu_entry_area.

The PEBS fixup buffer does not need this treatment.

[ tglx: Got rid of the kaiser_add_mapping() complication ]
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: keescook@google.com
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The Intel PEBS/BTS debug store is a design trainwreck as it expects virtual
addresses which must be visible in any execution context.

So it is required to make these mappings visible to user space when kernel
page table isolation is active.

Provide enough room for the buffer mappings in the cpu_entry_area so the
buffers are available in the user space visible page tables.

At the point where the kernel side entry area is populated there is no
buffer available yet, but the kernel PMD must be populated. To achieve this
set the entries for these buffers to non present.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Signed-off-by: NIngo Molnar <mingo@kernel.org>

[ Note, this is a Git cherry-pick of the following commit:

    a47ba4d7 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")

  ... for easier x86 PTI code testing and back-porting. ]

Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.

So we just need to check for the supported registers and then
allow it: it is all except for the segment register.

For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.

So we just need to check for the supported registers and then
allow it: it is all except for the segment register.

For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

For understanding how the workload maps to memory channels and hardware
behavior, it's very important to collect address maps with physical
addresses. For example, 3D XPoint access can only be found by filtering
the physical address.

Add a new sample type for physical address.

perf already has a facility to collect data virtual address. This patch
introduces a function to convert the virtual address to physical address.
The function is quite generic and can be extended to any architecture as
long as a virtual address is provided.

 - For kernel direct mapping addresses, virt_to_phys is used to convert
   the virtual addresses to physical address.

 - For user virtual addresses, __get_user_pages_fast is used to walk the
   pages tables for user physical address.

 - This does not work for vmalloc addresses right now. These are not
   resolved, but code to do that could be added.

The new sample type requires collecting the virtual address. The
virtual address will not be output unless SAMPLE_ADDR is applied.

For security, the physical address can only be exposed to root or
privileged user.
Tested-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/1503967969-48278-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It can be difficult to figure out for user programs what features
the x86 CPU PMU driver actually supports. Currently it requires
grepping in dmesg, but dmesg is not always available.

This adds a caps directory to /sys/bus/event_source/devices/cpu/,
similar to the caps already used on intel_pt, which can be used to
discover the available capabilities cleanly.

Three capabilities are defined:

 - pmu_name:	Underlying CPU name known to the driver
 - max_precise:	Max precise level supported
 - branches:	Known depth of LBR.

Example:

  % grep . /sys/bus/event_source/devices/cpu/caps/*
  /sys/bus/event_source/devices/cpu/caps/branches:32
  /sys/bus/event_source/devices/cpu/caps/max_precise:3
  /sys/bus/event_source/devices/cpu/caps/pmu_name:skylake
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170822185201.9261-3-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Skylake changed the encoding of the PEBS data source field.
Some combinations are not available anymore, but some new cases
e.g. for L4 cache hit are added.

Fix up the conversion table for Skylake, similar as had been done
for Nehalem.

On Skylake server the encoding for L4 actually means persistent
memory. Handle this case too.

To properly describe it in the abstracted perf format I had to add
some new fields. Since a hit can have only one level add a new
field that is an enumeration, not a bit field to describe
the level. It can describe any level. Some numbers are also
used to describe PMEM and LFB.

Also add a new generic remote flag that can be combined with
the generic level to signify a remote cache.

And there is an extension field for the snoop indication to handle
the Forward state.

I didn't add a generic flag for hops because it's not needed
for Skylake.

I changed the existing encodings for older CPUs to also fill in the
new level and remote fields.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/20170816222156.19953-3-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Minor cleanup: use an explicit x86_pmu flag to handle the
missing Lock / TLB information on Nehalem, instead of always
checking the model number for each PEBS sample.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/20170816222156.19953-2-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add perf core PMU support for Intel Goldmont Plus CPU cores:

 - The init code is based on Goldmont.
 - There is a new cache event list, based on the Goldmont cache event
   list.
 - All four general-purpose performance counters support PEBS.
 - The first general-purpose performance counter is for reduced skid
   PEBS mechanism. Using :ppp to indicate the event which want to do
   reduced skid PEBS.
 - Goldmont Plus has 4-wide pipeline for Topdown
Signed-off-by: NKan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/20170712134423.17766-1-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently, the SMIs are visible to all performance counters, because
many users want to measure everything including SMIs. But in some
cases, the SMI cycles should not be counted - for example, to calculate
the cost of an SMI itself. So a knob is needed.

When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance
counters will be effected. There is no way to do per-counter freeze
on SMI. So it should not use the per-event interface (e.g. ioctl or
event attribute) to set FREEZE_WHILE_SMM bit.

Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM
bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages
while in SMM.

Value has to be 0 or 1. It will be applied to all processors.

Also serialize the entire setting so we don't get multiple concurrent
threads trying to update to different values.
Signed-off-by: NKan Liang <Kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: bp@alien8.de
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Spurious NMIs will be observed with the following command:

  while :; do
    perf record -bae "cpu/umask=0x01,event=0xcd,ldlat=0x80/pp"
                  -e "cpu/umask=0x03,event=0x0/"
                  -e "cpu/umask=0x02,event=0x0/"
                  -e cycles,branches,cache-misses
                  -e cache-references -- sleep 10
  done

The bug was introduced by commit:

  8077eca0 ("perf/x86/pebs: Add workaround for broken OVFL status on HSW+")

That commit clears the status bits for the counters used for PEBS
events, by masking the whole 64 bits pebs_enabled. However, only the
low 32 bits of both status and pebs_enabled are reserved for PEBS-able
counters.

For status bits 32-34 are fixed counter overflow bits. For
pebs_enabled bits 32-34 are for PEBS Load Latency.

In the test case, the PEBS Load Latency event and fixed counter event
could overflow at the same time. The fixed counter overflow bit will
be cleared by mistake. Once it is cleared, the fixed counter overflow
never be processed, which finally trigger spurious NMI.

Correct the PEBS enabled mask by ignoring the non-PEBS bits.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 8077eca0 ("perf/x86/pebs: Add workaround for broken OVFL status on HSW+")
Link: http://lkml.kernel.org/r/1491333246-3965-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

An earlier patch allowed enabling PT and LBR at the same
time on Goldmont. However it also allowed enabling BTS and LBR
at the same time, which is still not supported. Fix this by
bypassing the check only for PT.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: alexander.shishkin@intel.com
Cc: kan.liang@intel.com
Cc: <stable@vger.kernel.org>
Fixes: ccbebba4 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
Link: http://lkml.kernel.org/r/20161209001417.4713-1-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Vince Weaver reported that perf_fuzzer + KASAN detects that PEBS event
unwinds sometimes do 'weird' things. In particular, we seemed to be
ending up unwinding from random places on the NMI stack.

While it was somewhat expected that the event record BP,SP would not
match the interrupt BP,SP in that the interrupt is strictly later than
the record event, it was overlooked that it could be on an already
overwritten stack.

Therefore, don't copy the recorded BP,SP over the interrupted BP,SP
when we need stack unwinds.

Note that its still possible the unwind doesn't full match the actual
event, as its entirely possible to have done an (I)RET between record
and interrupt, but on average it should still point in the general
direction of where the event came from. Also, it's the best we can do,
considering.

The particular scenario that triggered the bogus NMI stack unwind was
a PEBS event with very short period, upon enabling the event at the
tail of the PMI handler (FREEZE_ON_PMI is not used), it instantly
triggers a record (while still on the NMI stack) which in turn
triggers the next PMI. This then causes back-to-back NMIs and we'll
try and unwind the stack-frame from the last NMI, which obviously is
now overwritten by our own.
Analyzed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davej@codemonkey.org.uk <davej@codemonkey.org.uk>
Cc: dvyukov@google.com <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: ca037701 ("perf, x86: Add PEBS infrastructure")
Link: http://lkml.kernel.org/r/20161117171731.GV3157@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The lbr_context logic confused me; it appears to me to try and do the
same thing the pmu::sched_task() callback does now, but limited to
per-task events.

So rip it out. Afaict this should also improve performance, because I
think the current code can end up doing lbr_reset() twice, once from
the pmu::add() and then again from pmu::sched_task(), and MSR writes
(all 3*16 of them) are expensive!!

While thinking through the cases that need the reset it occured to me
the first install of an event in an active context needs to reset the
LBR (who knows what crap is in there), but detecting this case is
somewhat hard.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>