This patch make processing netlink user -> kernel messages synchronious.
This change was inspired by the talk with Alexey Kuznetsov about current
netlink messages processing. He says that he was badly wrong when introduced 
asynchronious user -> kernel communication.

The call netlink_unicast is the only path to send message to the kernel
netlink socket. But, unfortunately, it is also used to send data to the
user.

Before this change the user message has been attached to the socket queue
and sk->sk_data_ready was called. The process has been blocked until all
pending messages were processed. The bad thing is that this processing
may occur in the arbitrary process context.

This patch changes nlk->data_ready callback to get 1 skb and force packet
processing right in the netlink_unicast.

Kernel -> user path in netlink_unicast remains untouched.

EINTR processing for in netlink_run_queue was changed. It forces rtnl_lock
drop, but the process remains in the cycle until the message will be fully
processed. So, there is no need to use this kludges now.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are currently two ways to determine whether the netlink socket is a
kernel one or a user one. This patch creates a single inline call for
this purpose and unifies all the calls in the af_netlink.c

No similar calls are found outside af_netlink.c.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netlink_sendskb does not use third argument. Clean it and save a couple of
bytes.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code in netfilter/nfnetlink.c and in ./net/netlink/genetlink.c looks
like outdated copy/paste from rtnetlink.c. Push them into sync with the
original.

Changes from v1:
- deleted comment in nfnetlink_rcv_msg by request of Patrick McHardy
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to process outstanding netlink user->kernel packets
during rtnl_unlock now. There is no rtnl_trylock in the rtnetlink_rcv
anymore.

Normal code path is the following:
netlink_sendmsg
   netlink_unicast
       netlink_sendskb
           skb_queue_tail
           netlink_data_ready
               rtnetlink_rcv
                   mutex_lock(&rtnl_mutex);
                   netlink_run_queue(sk, qlen, &rtnetlink_rcv_msg);
                   mutex_unlock(&rtnl_mutex);

So, it is possible, that packets can be present in the rtnl->sk_receive_queue
during rtnl_unlock, but there is no need to process them at that moment as
rtnetlink_rcv for that packet is pending.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a few typos in comments in include/net/netlink.h
Signed-off-by: NPierre Ynard <linkfanel@yahoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If kernel_accept() returns an error, it may pass back a pointer to
freed memory (which the caller should ignore).  Make it pass back NULL
instead for better safety.
Signed-off-by: NTony Battersby <tonyb@cybernetics.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update to version 3.83.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch enables WOL by default if out-of-box WOL is enabled in the
NVRAM.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds rest of the miscellaneous code required to support the
5761.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for the new APE block, present in 5761 chips.
APE stands for Application Processing Engine.  The primary function of
the APE is to process manageability traffic, such as ASF.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new 5761-specific NVRAM strapping decode routine.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Expansion of original idea from Denis V. Lunev <den@openvz.org>

Add robustness and locking to the local_port_range sysctl.
1. Enforce that low < high when setting.
2. Use seqlock to ensure atomic update.

The locking might seem like overkill, but there are
cases where sysadmin might want to change value in the
middle of a DoS attack.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add port randomization rather than a simple fixed rover
for use with SCTP.  This makes it act similar to TCP, UDP, DCCP
when allocating ports.

No longer need port_alloc_lock as well (suggestion by Brian Haley).
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fourth parameter of /proc/net/psched is supposed to show the timer
resultion and is used by HTB userspace to calculate the necessary
burst rate. Currently we show the clock resolution, which results in a
too low burst rate when the two differ.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the default WoL setting to match the NVRAM's setting.  It
always defaulted to WoL disabled before and caused a lot of confusion
for users.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The remote PHY media type and link status can change between
->probe() and ->open().  For correct operation, we need to get the
new status again during ->open().

The ethtool link test and loopback test are also fixed to work with
remote PHY.  PHY loopback is simply skipped when remote PHY is
present.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes the IPv4 x->type->input functions return the next protocol
instead of setting it directly.  This is identical to how we do things in
IPv6 and will help us merge common code on the input path.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the setting of the IP length and checksum fields out of
the transforms and into the xfrmX_output functions.  This would help future
efforts in merging the transforms themselves.

It also adds an optimisation to ipcomp due to the fact that the transport
offset is guaranteed to be zero.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since
they're identical to the IPv4 versions.  Duplicating them would only create
problems for ourselves later when we need to add things like extended
sequence numbers.

I've also added transport header type conversion headers for these types
which are now used by the transforms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IPv6 calling convention for x->mode->output is more general and could
help an eventual protocol-generic x->type->output implementation.  This
patch adopts it for IPv4 as well and modifies the IPv4 type output functions
accordingly.

It also rewrites the IPv6 mac/transport header calculation to be based off
the network header where practical.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the calling convention so that on entry from
x->mode->output and before entry into x->type->output skb->data
will point to the payload instead of the IP header.

This is essentially a redistribution of skb_push/skb_pull calls
with the aim of minimising them on the common path of tunnel +
ESP.

It'll also let us use the same calling convention between IPv4
and IPv6 with the next patch.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The beet output function completely kills any extension headers by replacing
them with the IPv6 header.  This is because it essentially ignores the
result of ip6_find_1stfragopt by simply acting as if there aren't any
extension headers.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I pointed this out back when this patch was first proposed but it looks like
it got lost along the way.

The checksum only needs to be ignored for NAT-T in transport mode where
we lose the original inner addresses due to NAT.  With BEET the inner
addresses will be intact so the checksum remains valid.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To judge the timing for DAD, netif_carrier_ok() is used. However,
there is a possibility that dev->qdisc stays noop_qdisc even if
netif_carrier_ok() returns true. In that case, DAD NS is not sent out.
We need to defer the IPv6 device initialization until a valid qdisc
is specified.
Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The unregister_netdevice() and dev_change_net_namespace()
both check for dev->flags to be IFF_UP before calling the
dev_close(), but the dev_close() checks for IFF_UP itself,
so remove those unneeded checks.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Follows own function for each task principle, this is really
somewhat separate task being done in sacktag. Also reduces
indentation.

In addition, added ack_seq local var to break some long
lines & fixed coding style things.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are currently several SHA implementations that all define their own
initialization vectors and size values. Since this values are idential
move them to a header file under include/crypto.
Signed-off-by: NJan Glauber <jang@de.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.

Additionally it ensures that the generic implementation as well as the
HW driver (if available) is loaded in case the HW driver needs the
generic version as fallback in corner cases.

Also remove the probe for sha1 in padlock's init code.

Quote from Herbert:
  The probe is actually pointless since we can always probe when
  the algorithm is actually used which does not lead to dead-locks
  like this.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.

Additionally it ensures that the generic implementation as well as the
HW driver (if available) is loaded in case the HW driver needs the
generic version as fallback in corner cases.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the helper blkcipher_walk_virt_block which is similar to
blkcipher_walk_virt but uses a supplied block size instead of the block
size of the block cipher.  This is useful for CTR where the block size is
1 but we still want to walk by the block size of the underlying cipher.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that the block size is no longer a multiple of the alignment, we need to
increase the kmalloc amount in blkcipher_next_slow to use the aligned block
size.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a comment to explain why we compare the cra_driver_name of
the algorithm being registered against the cra_name of a larval as opposed
to the cra_driver_name of the larval.

In fact larvals have only one name, cra_name which is the name that was
requested by the user.  The test here is simply trying to find out whether
the algorithm being registered can or can not satisfy the larval.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Previously we assumed for convenience that the block size is a multiple of
the algorithm's required alignment.  With the pending addition of CTR this
will no longer be the case as the block size will be 1 due to it being a
stream cipher.  However, the alignment requirement will be that of the
underlying implementation which will most likely be greater than 1.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We do not allow spaces in algorithm names or parameters.  Thanks to Joy Latten
for pointing this out.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As Joy Latten points out, inner algorithm parameters will miss the closing
bracket which will also cause the outer algorithm to terminate prematurely.

This patch fixes that also kills the WARN_ON if the number of parameters
exceed the maximum as that is a user error.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

XTS currently considered to be the successor of the LRW mode by the IEEE1619
workgroup. LRW was discarded, because it was not secure if the encyption key
itself is encrypted with LRW.

XTS does not have this problem. The implementation is pretty straightforward,
a new function was added to gf128mul to handle GF(128) elements in ble format.
Four testvectors from the specification
	http://grouper.ieee.org/groups/1619/email/pdf00086.pdf
were added, and they verify on my system.
Signed-off-by: NRik Snel <rsnel@cube.dyndns.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use max in blkcipher_get_spot() instead of open coding it.
Signed-off-by: NIngo Oeser <ioe-lkml@rameria.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>