Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 19 7月, 2019 3 次提交
  3. 16 7月, 2019 2 次提交
  5. 13 7月, 2019 1 次提交
  7. 12 7月, 2019 1 次提交
  9. 11 7月, 2019 1 次提交
  11. 09 7月, 2019 1 次提交
  13. 05 7月, 2019 1 次提交
  15. 04 7月, 2019 1 次提交
  17. 03 7月, 2019 1 次提交
  19. 26 6月, 2019 1 次提交
  21. 21 6月, 2019 6 次提交
  23. 20 6月, 2019 1 次提交
    • C
      drm/i915/execlists: Preempt-to-busy · 22b7a426
      由 Chris Wilson 提交于 
      When using a global seqno, we required a precise stop-the-workd event to
handle preemption and unwind the global seqno counter. To accomplish
this, we would preempt to a special out-of-band context and wait for the
machine to report that it was idle. Given an idle machine, we could very
precisely see which requests had completed and which we needed to feed
back into the run queue.

However, now that we have scrapped the global seqno, we no longer need
to precisely unwind the global counter and only track requests by their
per-context seqno. This allows us to loosely unwind inflight requests
while scheduling a preemption, with the enormous caveat that the
requests we put back on the run queue are still _inflight_ (until the
preemption request is complete). This makes request tracking much more
messy, as at any point then we can see a completed request that we
believe is not currently scheduled for execution. We also have to be
careful not to rewind RING_TAIL past RING_HEAD on preempting to the
running context, and for this we use a semaphore to prevent completion
of the request before continuing.

To accomplish this feat, we change how we track requests scheduled to
the HW. Instead of appending our requests onto a single list as we
submit, we track each submission to ELSP as its own block. Then upon
receiving the CS preemption event, we promote the pending block to the
inflight block (discarding what was previously being tracked). As normal
CS completion events arrive, we then remove stale entries from the
inflight tracker.

v2: Be a tinge paranoid and ensure we flush the write into the HWS page
for the GPU semaphore to pick in a timely fashion.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190620142052.19311-1-chris@chris-wilson.co.uk
      22b7a426
  25. 19 6月, 2019 1 次提交
  27. 15 6月, 2019 2 次提交
    • C
      drm/i915: Replace engine->timeline with a plain list · 422d7df4
      由 Chris Wilson 提交于 
      To continue the onslaught of removing the assumption of a global
execution ordering, another casualty is the engine->timeline. Without an
actual timeline to track, it is overkill and we can replace it with a
much less grand plain list. We still need a list of requests inflight,
for the simple purpose of finding inflight requests (for retiring,
resetting, preemption etc).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk
      422d7df4
    • C
      drm/i915: Keep contexts pinned until after the next kernel context switch · ce476c80
      由 Chris Wilson 提交于 
      We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.

The sequence of operations for keeping the context pinned until saved is:

 - On context activation, we preallocate a node for each physical engine
   the context may operate on. This is to avoid allocations during
   unpinning, which may be from inside FS_RECLAIM context (aka the
   shrinker)

 - On context deactivation on retirement of the last active request (which
   is before we know the context has been saved), we add the
   preallocated node onto a barrier list on each engine

 - On engine idling, we emit a switch to kernel context. When this
   switch completes, we know that all previous contexts must have been
   saved, and so on retiring this request we can finally unpin all the
   contexts that were marked as deactivated prior to the switch.

We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.

v2: intel_context_active_acquire/_release
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
      ce476c80
  29. 14 6月, 2019 1 次提交
  31. 10 6月, 2019 1 次提交
  33. 29 5月, 2019 2 次提交
    • J
      Revert "drm/i915: Expand subslice mask" · a10f361d
      由 Jani Nikula 提交于 
      This reverts commit 1ac159e2 ("drm/i915: Expand subslice mask"),
which kills ICL due to GEM_BUG_ON() sanity checks before CI even gets a
chance to do anything.

The commit exposes an issue in commit 1e40d4ae ("drm/i915/cnl:
Implement WaProgramMgsrForCorrectSliceSpecificMmioReads"), which will
also need to be addressed.

There's a proposed fix [1], but considering the seeming uncertainty with
the fix as well as the size of the regressing commit (in this context,
the one that actually brings down ICL), this warrants a revert to get
ICL working, and gives us time to get all of this right without
rushing. Even if this means shooting the messenger.

<3>[    9.426327] intel_sseu_get_subslices:46 GEM_BUG_ON(slice >= sseu->max_slices)
<4>[    9.426355] ------------[ cut here ]------------
<2>[    9.426357] kernel BUG at drivers/gpu/drm/i915/gt/intel_sseu.c:46!
<4>[    9.426371] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[    9.426377] CPU: 1 PID: 364 Comm: systemd-udevd Not tainted 5.2.0-rc2-CI-CI_DRM_6159+ #1
<4>[    9.426385] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4>[    9.426444] RIP: 0010:intel_sseu_get_subslices+0x8a/0xe0 [i915]
<4>[    9.426452] Code: d5 76 b7 e0 48 8b 35 9d 24 21 00 49 c7 c0 07 f0 72 a0 b9 2e 00 00 00 48 c7 c2 00 8e 6d a0 48 c7 c7 a5 14 5b a0 e8 36 3c be e0 <0f> 0b 48 c7 c1 80 d5 6f a0 ba 30 00 00 00 48 c7 c6 00 8e 6d a0 48
<4>[    9.426468] RSP: 0018:ffffc9000037b9c8 EFLAGS: 00010282
<4>[    9.426475] RAX: 000000000000000f RBX: 0000000000000000 RCX: 0000000000000000
<4>[    9.426482] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88849e346f98
<4>[    9.426490] RBP: ffff88848a200000 R08: 0000000000000004 R09: ffff88849d50b000
<4>[    9.426497] R10: 0000000000000000 R11: ffff88849e346f98 R12: ffff88848a209e78
<4>[    9.426505] R13: 0000000003000000 R14: ffff88848a20b1a8 R15: 0000000000000000
<4>[    9.426513] FS:  00007f73d5ae8680(0000) GS:ffff88849fc80000(0000) knlGS:0000000000000000
<4>[    9.426521] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[    9.426527] CR2: 0000561417b01260 CR3: 0000000494764003 CR4: 0000000000760ee0
<4>[    9.426535] PKRU: 55555554
<4>[    9.426538] Call Trace:
<4>[    9.426585]  wa_init_mcr+0xd5/0x110 [i915]
<4>[    9.426597]  ? lock_acquire+0xa6/0x1c0
<4>[    9.426645]  icl_gt_workarounds_init+0x21/0x1a0 [i915]
<4>[    9.426694]  ? i915_driver_load+0xfcf/0x18a0 [i915]
<4>[    9.426739]  gt_init_workarounds+0x14c/0x230 [i915]
<4>[    9.426748]  ? _raw_spin_unlock_irq+0x24/0x50
<4>[    9.426789]  intel_gt_init_workarounds+0x1b/0x30 [i915]
<4>[    9.426835]  i915_driver_load+0xfd7/0x18a0 [i915]
<4>[    9.426843]  ? lock_acquire+0xa6/0x1c0
<4>[    9.426850]  ? __pm_runtime_resume+0x4f/0x80
<4>[    9.426857]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[    9.426863]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[    9.426870]  ? lockdep_hardirqs_on+0xe3/0x1b0
<4>[    9.426915]  i915_pci_probe+0x29/0xa0 [i915]
<4>[    9.426923]  pci_device_probe+0x9e/0x120
<4>[    9.426930]  really_probe+0xea/0x3c0
<4>[    9.426936]  driver_probe_device+0x10b/0x120
<4>[    9.426942]  device_driver_attach+0x4a/0x50
<4>[    9.426948]  __driver_attach+0x97/0x130
<4>[    9.426954]  ? device_driver_attach+0x50/0x50
<4>[    9.426960]  bus_for_each_dev+0x74/0xc0
<4>[    9.426966]  bus_add_driver+0x13f/0x210
<4>[    9.426971]  ? 0xffffffffa083b000
<4>[    9.426976]  driver_register+0x56/0xe0
<4>[    9.426982]  ? 0xffffffffa083b000
<4>[    9.426987]  do_one_initcall+0x58/0x300
<4>[    9.426994]  ? do_init_module+0x1d/0x1f6
<4>[    9.427001]  ? rcu_read_lock_sched_held+0x6f/0x80
<4>[    9.427007]  ? kmem_cache_alloc_trace+0x261/0x290
<4>[    9.427014]  do_init_module+0x56/0x1f6
<4>[    9.427020]  load_module+0x24d1/0x2990
<4>[    9.427032]  ? __se_sys_finit_module+0xd3/0xf0
<4>[    9.427037]  __se_sys_finit_module+0xd3/0xf0
<4>[    9.427047]  do_syscall_64+0x55/0x1c0
<4>[    9.427053]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[    9.427059] RIP: 0033:0x7f73d5609839
<4>[    9.427064] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
<4>[    9.427082] RSP: 002b:00007ffdf34477b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
<4>[    9.427091] RAX: ffffffffffffffda RBX: 00005559fd5d7b40 RCX: 00007f73d5609839
<4>[    9.427099] RDX: 0000000000000000 RSI: 00007f73d52e8145 RDI: 000000000000000f
<4>[    9.427106] RBP: 00007f73d52e8145 R08: 0000000000000000 R09: 00007ffdf34478d0
<4>[    9.427114] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000
<4>[    9.427121] R13: 00005559fd5c90f0 R14: 0000000000020000 R15: 00005559fd5d7b40
<4>[    9.427131] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp snd_hda_intel crct10dif_pclmul crc32_pclmul snd_hda_codec snd_hwdep e1000e snd_hda_core ghash_clmulni_intel ptp snd_pcm cdc_ether usbnet mii pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc
<4>[    9.427254] ---[ end trace af3eeb543bd66e66 ]---

[1] http://patchwork.freedesktop.org/patch/msgid/20190528200655.11605-1-chris@chris-wilson.co.uk

References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6159/fi-icl-u2/pstore0-1517155098_Oops_1.log
References: 1e40d4ae ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads")
Fixes: 1ac159e2 ("drm/i915: Expand subslice mask")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Yunwei Zhang <yunwei.zhang@intel.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529082150.31526-1-jani.nikula@intel.com
      a10f361d
    • S
      drm/i915: Expand subslice mask · 1ac159e2
      由 Stuart Summers 提交于 
      Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
  slice * subslice stride + subslice index / 8

v2: fix spacing in set_sseu_info args
    use set_sseu_info to initialize sseu data when building
    device status in debugfs
    rename variables in intel_engine_types.h to avoid checkpatch
    warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
    use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
    return the correct subslice enable in for_each_instdone
    add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
    use printk formatted string for subslice mask
v7: remove string.h header and rebase

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NStuart Summers <stuart.summers@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
      1ac159e2
  35. 28 5月, 2019 3 次提交
  37. 22 5月, 2019 1 次提交
    • T
      drm/i915: Engine discovery query · c5d3e39c
      由 Tvrtko Ursulin 提交于 
      Engine discovery query allows userspace to enumerate engines, probe their
configuration features, all without needing to maintain the internal PCI
ID based database.

A new query for the generic i915 query ioctl is added named
DRM_I915_QUERY_ENGINE_INFO, together with accompanying structure
drm_i915_query_engine_info. The address of latter should be passed to the
kernel in the query.data_ptr field, and should be large enough for the
kernel to fill out all known engines as struct drm_i915_engine_info
elements trailing the query.

As with other queries, setting the item query length to zero allows
userspace to query minimum required buffer size.

Enumerated engines have common type mask which can be used to query all
hardware engines, versus engines userspace can submit to using the execbuf
uAPI.

Engines also have capabilities which are per engine class namespace of
bits describing features not present on all engine instances.

v2:
 * Fixed HEVC assignment.
 * Reorder some fields, rename type to flags, increase width. (Lionel)
 * No need to allocate temporary storage if we do it engine by engine.
   (Lionel)

v3:
 * Describe engine flags and mark mbz fields. (Lionel)
 * HEVC only applies to VCS.

v4:
 * Squash SFC flag into main patch.
 * Tidy some comments.

v5:
 * Add uabi_ prefix to engine capabilities. (Chris Wilson)
 * Report exact size of engine info array. (Chris Wilson)
 * Drop the engine flags. (Joonas Lahtinen)
 * Added some more reserved fields.
 * Move flags after class/instance.

v6:
 * Do not check engine info array was zeroed by userspace but zero the
   unused fields for them instead.

v7:
 * Simplify length calculation loop. (Lionel Landwerlin)

v8:
 * Remove MBZ comments where not applicable.
 * Rename ABI flags to match engine class define naming.
 * Rename SFC ABI flag to reflect it applies to VCS and VECS.
 * SFC is wired to even _logical_ engine instances.
 * SFC applies to VCS and VECS.
 * HEVC is present on all instances on Gen11. (Tony)
 * Simplify length calculation even more. (Chris Wilson)
 * Move info_ptr assigment closer to loop for clarity. (Chris Wilson)
 * Use vdbox_sfc_access from runtime info.
 * Rebase for RUNTIME_INFO.
 * Refactor for lower indentation.
 * Rename uAPI class/instance to engine_class/instance to avoid C++
   keyword.

v9:
 * Rebase for s/num_rings/num_engines/ in RUNTIME_INFO.

v10:
 * Use new copy_query_item.

v11:
 * Consolidate with struct i915_engine_class_instnace.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # v7
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522090054.6007-1-tvrtko.ursulin@linux.intel.com
      c5d3e39c
  39. 08 5月, 2019 1 次提交
  41. 07 5月, 2019 1 次提交
  43. 03 5月, 2019 1 次提交
  45. 02 5月, 2019 1 次提交
  47. 01 5月, 2019 1 次提交
  49. 27 4月, 2019 3 次提交
  51. 26 4月, 2019 1 次提交
    • C
      drm/i915: Enable render context support for gen4 (Broadwater to Cantiga) · 9ce9bdb0
      由 Chris Wilson 提交于 
      Broadwater and the rest of gen4  do support being able to saving and
reloading context specific registers between contexts, providing isolation
of the basic GPU state (as programmable by userspace). This allows
userspace to assume that the GPU retains their state from one batch to the
next, minimising the amount of state it needs to reload and manually save
across batches.

v2: CONSTANT_BUFFER woes

Running through piglit turned up an interesting issue, a GPU hang inside
the context load. The context image includes the CONSTANT_BUFFER command
that loads an address into a on-gpu buffer, and the context load was
executing that immediately. However, since it was reading from the GTT
there is no guarantee that the GTT retains the same configuration as
when the context was saved, resulting in stray reads and a GPU hang.

Having tried issuing a CONSTANT_BUFFER (to disable the command) from the
ring before saving the context to no avail, we resort to patching out
the instruction inside the context image before loading.

This does impose that gen4 always reissues CONSTANT_BUFFER commands on
each batch, but due to the use of a shared GTT that was and will remain
a requirement.

v3: ECOSKPD to the rescue

Ville found the magic bit in the ECOSKPD to disable saving and restoring
the CONSTANT_BUFFER from the context image, thereby completely avoiding
the GPU hangs from chasing invalid pointers. This appears to be the
default behaviour for gen5, and so we just need to tweak gen4 to match.

v4: Fix spelling of ECOSKPD and discover it already exists
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190419172720.5462-1-chris@chris-wilson.co.uk
      9ce9bdb0