This patch changes VMALLOC_END from 0xE0000000 to 0xF6000000, because
some systems want to use more vmalloc()/ioremap() area and now don't use
from at 0xE0000000 to 0xF6000000 (the start of Samsung SoCs' VA space)

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Adds suspend-to-ram support for SMDK2416 based on existing 2412 PM code
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

S3C2443 and S3C2416 has 12 GPIO banks (from A to M), increase
ARCH_NR_GPIOS for this architectures.

Also typo from previous commit has been fixed: CONFIG_CPU_S3C24XX
instead CONFIG_CPU_244X.
Signed-off-by: NYauhen Kharuzhy <jekhor@gmail.com>
Tested-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fix this warning:

arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:644: warning: format '%08lx' expects type
'long unsigned int', but argument 12 has type 'unsigned int'

And removes the useless parens and white space.
Reported-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the platform specific bootmem memory reservations out of
arch/arm/mm/mmu.c into their respective platform files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch moves the definitions of watchdog timer device from
plat-s3c24xx to plat-samsung. This will enable all Samsung S3C
and S5P series SoC's to use common WDT device definition.
Signed-off-by: NBanajit Goswami <banajit.g@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch implements cfg_gpio function for Samsung touchscreen.
And also modifies the H1940 machine respectively.
Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This moves mach-s3c2410/include/mach/ts.h to plat-samsung/include/plat/ts.h in
order to prepare for s3c64xx support in the touchscreen driver.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a table for the GPIO bank sizes for each SoC
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the necessary defines to get the s3c-fb device to compile for
s3c2443.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Seems like a typo, wrong setup leads to broken image on ipaq screen.
Signed-off-by: NMike Solovyev <ms@sk.2-ch.org>
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move HWMON platform definition from plat-s3c24xx to plat-samsung
and adjust mach-bast to use the new s3c_hwmon_set_platdata().
This allows usage of dev-hwmon by other Samsung SoCs.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The address ben@fluff.org is old, ben-linux@fluff.org has been in use
for a long time, and we should fixup all the occasions of the older
address to avoid confusion.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

According to datasheet GPG13-15 must be configured as input in NAND
boot mode, otherwise device will not be able to wake up
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

If PM_H1940 is enabled, kernel _must_ be located upper then 0x30008000,
because this area (0x30000000-0x30100000) can be used by bootloader. If
kernel is located at 0x30008000, bootloader will corrupt kernel's code during
resume.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add support for the second HSMMC channel on the S3C2416.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add basic clock support for the PLLs, HSMMC channels and
PWM clocks. This is enough to get a basic system up and
running.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add macros for S3C2416 SoC support.
Signed-off-by: NYauhen Kharuzhy <jekhor@gmail.com>
[ben-linux@fluff.org: removed files that need changing]
[ben-linux@fluff.org: Fix S3C2416_GPH0_TXD0 definition]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The n30_init_irq() call is simply a call to s3c24xx_init_irq, so
just remove it and update the machine definitions to call the IRQ
initialision call directly.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move to using gpio_request() and gpio_set_value() for the MMC power
control calls.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

There is bug in USB setup code for Acer n35 (it is related directly to s3c2410,
see doc). We want suspend host port (is not connected) but device port should be
active.
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

All code already present for Acer n35 is useless unless MACH_N35 is defined.
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz>
[ben-linux@fluff.org: minor edit of subject]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add S3C2416 serial port setup to uncompress code.
Signed-off-by: NYauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Remove the _INP definitions, they are all zero and also unused
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Remove the old S3C2410_GPJ as we will be moving to the new gpiolib
based driver code and these numbers will become invalid.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Remove the last s3c2410_gpio_pullup() users in arch/arm/mach-s3c2410

Note, since mach-h1940.c is setting output and a pull-up, the call
has vbeen chanerd to S3C_GPIO_PULL_NONE instead of S3C_GPIO_PULL_UP.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Remove the unused s3c2410_gpio_getpull()
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Remove the implementation of s3c2410_gpio_setcfg() as it should now be
functionally equivalent to s3c_gpio_cfgpin(), and add a wrapper for those
drivers that are still using this call.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The s3c_gpio_cfgpin() call should be functionally equivalent, so replace
the s3c2410_gpio_cfgpin() calls in the s3c24xx code with s3c_gpio_cfgpin
to allow moving away from a fixed GPIO number to register address mapping
Signed-off-by: NBen Dooks <ben-linux@fluff.org>