mainline inclusion
from mainline-master
commit ed5fa39f
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I475PF?from=project-issue
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git/commit/drivers/crypto/hisilicon?id=ed5fa39fa8a62fc55c1c4d53b71f3f4f08a90d22

----------------------------------------------------------------------

Kunpeng930 zip device supports dynamic clock gating. When executing tasks,
the algorithm core is opened, and when idle, the algorithm core is closed.
This patch enables zip dynamic clock gating by writing hardware registers.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: NHao Fang <fanghao11@huawei.com>
Reviewed-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 38a9eb81
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=38a9eb8182a24c7ef2dbe82ab46cafe8f8e9b271

----------------------------------------------------------------------

The ZIP driver support configure each function's QoS in the Host
for Kunpeng930. The ZIP driver needs to configure the maximum shaper
type rate.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit a5c164b1
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a5c164b195a89aedc8179d68cedf00e7f8baa58e

----------------------------------------------------------------------

Kunpeng930 hardware supports address prefetching to improve performance
before doing tasks in SVA scenario.

This patch enables this function in device initialization by writing
hardware registers. In the process of reset, address prefetching is
disabled to avoid the failure of interaction between accelerator device
and SMMU.
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit b7da13d0
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b7da13d092a4919823c2b260ca7ea6ef1690b80b

----------------------------------------------------------------------

Kunpeng930 could be able to close master ooo when NFE occurs, which will
disable memory accessing from device and execute tasks. This ensures that
errors do not spread.

This patch enables the hardware to close master ooo when an error occurs
by writing hardware registers, and ensures that the driver will not drain
qp because the hardware will empty the tasks automatically.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 3b9c24de
category: bugfix
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3b9c24dec891d418e26032709d6f01fe3757a4a6

----------------------------------------------------------------------

In order to avoid reporting an exception but the error type is not
configured, the driver needs to configure the error type first, and then
enable the error interrupt. Before executing the task, hardware error
initialization is needed so that the hardware can detect the error in time.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit b7220a74
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b7220a7439fa5e2506428252e9046963ab51d48d

----------------------------------------------------------------------

Kunpeng930 ZIP adds 'zip_axi_poison_err' 'zip_sva_err' and
'QM_ACC_DO_TASK_TIMEOUT' hardware error types. This patch enables the error
types and configures the error types as NFE.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit d9e21600
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d9e21600dc0930d49a09060dd20ec8544983f202

----------------------------------------------------------------------

'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 95c612b3
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=95c612b30898ca5fe7c76ef31d910e37ace6f34e

----------------------------------------------------------------------

The Kunpeng930 changes some field meanings in 'sqe'. So add a new
'hisi_zip_sqe_ops' to describe the 'sqe' operations.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 2bcf3634
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2bcf36348ce50e650fe8e1db046029afc89ef098

----------------------------------------------------------------------

The operations about 'sqe' are different on some hardwares. Add a struct
'hisi_zip_sqe_ops' to describe the operations in a hardware. And choose the
'ops' in 'hisi_zip_acomp_init' according to the hardware.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit d7468818
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d746881855ba167597d835de512150b6e6ea19ae

----------------------------------------------------------------------

Some fields of 'hisi_zip_sqe' are unused, and some fields have misc
utilities. So add comments for used fields and make others unnamed.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 30a4240e
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=30a4240e06ea7eecbc5645916501112ef8532533

----------------------------------------------------------------------

This patch changes nothing about functions except location in order to make
code logic clearly.

This adjustment follows three principles:
1.The called functions are listed in order above the calling functions.
2.The paired functions are next to each other.
3.Logically similar functions are placed in the same area. Here, we use
the callback of 'acomp_alg' as the basis for dividing areas.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit c4392b46
category: bugfix
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c4392b46ee95be9815e682a1c8cb0aa2f92f07e2

----------------------------------------------------------------------

Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 45bb26d9
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=45bb26d946cd89c08e6b8410a76b9bf3614c9d78

----------------------------------------------------------------------

Move the configuration of the total number of queues 'ctrl_qp_num'
from sec2/hpre/zip to qm.c. And get the total number of queues
from the hardware register for Kunpeng930.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8123455a
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8123455a648581ed08b1740e4fc33863eb353687

----------------------------------------------------------------------

A new generation of accelerator Kunpeng930 has appeared, and the
corresponding driver needs to be updated to support some new
algorithms of Kunpeng930. To be compatible with Kunpeng920, we
add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to
identify the chip's version.
Signed-off-by: NMeng Yu <yumeng18@huawei.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Reviewed-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit 1db0016e
category: bugfix
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1db0016e0d223b644d2c77a4569e8939f5c55a7c

----------------------------------------------------------------------

There is no need to reset hardware when Corrected Error(CE) happens.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit 3e9954fe
category: bugfix
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3e9954fe36ad3e254d35cc7da5117c850cbc0e50

----------------------------------------------------------------------

Add waiting logic for resetting as removing driver,
otherwise call trace will occur due to releasing resource.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit cc3292d1
category: bugfix
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cc3292d1df23539302752bb316b5f42f508f0963

----------------------------------------------------------------------

Enable PASID by setting 'sqc' and 'cqc' pasid bits
per queue in Kunpeng 930.

For Kunpeng 920, PASID is effective for all queues once set
in SVA scenarios.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc1-dontuse
commit f8408d2b
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f8408d2b79b834f79b6c578817e84f74a85d2190

----------------------------------------------------------------------

Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1.
'0' means ZIP is only registered to kernel crypto, and '1' means it's
registered to both kernel crypto and UACCE.
Signed-off-by: NKai Ye <yekai13@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit 1dc44035
category: feature
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1dc440355e472a60a98cb4ec9aa5ec56267a96fc

----------------------------------------------------------------------

The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs'
set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the
thread which is sending request, the throughput will be just half.

So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work
on some different CPUS.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZaibo Xu <xuzaibo@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.11-rc1
commit a8ff38bd
category: bugfix
bugzilla: 173981
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a8ff38bd829420d4813c22d018f412d5f1bb65df

----------------------------------------------------------------------

Since 'qm_create_debugfs_file' always returns 0, change it as 'void'.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NMingqiang Ling <lingmingqiang@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

The 'qm->curr_qm_qp_num' is not initialized, which will result in failure
to write the current_q file.
Signed-off-by: NSihang Chen <chensihang1@hisilicon.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As before, when the ZIP device is too busy to creat a request, it will
return '-EBUSY'. But the crypto process think the '-EBUSY' means a
successful request and wait for its completion.

So replace '-EBUSY' with '-EAGAIN' to show crypto this request is failed.

Fixes: 62c455ca("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The zero length input will cause a call trace when use GZIP
decompress like this:
    Unable to handle kernel paging request at virtual address
    ...
    lr : get_gzip_head_size+0x7c/0xd0 [hisi_zip]

Judge the input length and return '-EINVAL' when input is invalid.

Fixes: 62c455ca("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ZIP debug registers aren't cleared even if its driver is removed,
so add a clearing operation when remove driver.
Signed-off-by: NHao Fang <fanghao11@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The parameter type of 'pci_set_drvdata' is 'struct hisi_qm',
so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm'
too.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to pass kernel CRYPTO test, ZIP module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: NLongfang Liu <liulongfang@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1.Unified alignment styles
2.Remove unnecessary goto branch
3.Remove address printf
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Supplement some comments.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some macros which are defined in 'zip.h' are related to the struct
'hisi_zip_sqe' and are only used in 'zip_crypto.c'. So move them from
'zip.h' to 'zip_crypto.c'.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix some code for PClint warning:
    Warning - Suspicious Cast
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add print for some error branches.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Macros 'QPC_COMP', 'QPC_DECOMP' and 'HZIP_CTX_Q_NUM' are relative and
incremental. So, use an enum instead.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace 'sprintf' with 'scnprintf' to avoid overrun.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Update debugfs interface parameters
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1.Add prefix 'HZIP' for some macros
2.Add prefix 'hisi_zip' for some functions
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1.Remove the macro 'HZIP_VF_NUM'.
2.Remove 'list' of the struct 'hisi_zip'
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.

Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.

In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Call trace will appear in the Hisilicon crypto driver unbinding or
disabling SRIOV during task running with TFMs on the corresponding
function.
The log looks like this:
	[  293.908078] Call trace:
	[  293.908080]  __queue_work+0x494/0x548
	[  293.908081]  queue_work_on+0x84/0xd8
	[  293.908092]  qm_irq+0x4c/0xd0 [hisi_qm]
	[  293.908096]  __handle_irq_event_percpu+0x74/0x2a0
	[  293.908098]  handle_irq_event_percpu+0x40/0x98
	[  293.908099]  handle_irq_event+0x4c/0x80
	[  293.908101]  handle_fasteoi_irq+0xb0/0x170
	[  293.908102]  generic_handle_irq+0x3c/0x58
	[  293.908103]  __handle_domain_irq+0x68/0xc0
	[  293.908104]  gic_handle_irq+0xb4/0x298
	[  293.908105]  el1_irq+0xcc/0x180
	[  293.908107]  arch_cpu_idle+0x38/0x228
	[  293.908110]  default_idle_call+0x20/0x40
	[  293.908113]  do_idle+0x1cc/0x2b8
	[  293.908114]  cpu_startup_entry+0x2c/0x30
	[  293.908115]  rest_init+0xdc/0xe8
	[  293.908117]  arch_call_rest_init+0x14/0x1c
	[  293.908117]  start_kernel+0x490/0x4c4

This patch adds a waiting logic as user doing the above two operations
to avoid panic. The two operations will hold on in the driver
remove function until the tasks release all their relative TFMs.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since the drivers such as HPRE/SEC/ZIP do not implement
'pci_driver.shutdow', a RAS will be triggered at OS rebooting or shutting
down as the hardware device is processing request.
The log looks like this:
	NOTICE:  [NimbusSecNodeType1]:[2372L]This is sec, Base = 0x141800000
	NOTICE:  [NimbusSecHandle]:[2319L] SecIntSt = 0x3
	NOTICE:  [NimbusSecHandle]:[2320L] SecQmIntStatus = 0x2
	NOTICE:  [PrintSecurityType]:[344L] SecurityType is RECOVERABLE!

This patch offers a new API in qm to shutdown devices, and add shutdown
callbacks in ACC driver based on this new API.

So the running devices will be stopped when the OS reboot or shutdown.
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'.
In order to keep this, explicitly pass the stop reason as an input
parameter of 'hisi_qm_stop' function.

Fixes: b67202e8("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: NShukun Tan <tanshukun1@huawei.com>
Signed-off-by: NYang Shen <shenyang39@huawei.com>
Reviewed-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>