When allocating the per-CPU scratch buffers, we allocate the source
and destination buffers separately, but bail immediately if the second
allocation fails, without freeing the first one. Fix that.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Due to the use of per-CPU buffers, scomp_acomp_comp_decomp() executes
with preemption disabled, and so whether the CRYPTO_TFM_REQ_MAY_SLEEP
flag is set is irrelevant, since we cannot sleep anyway. So disregard
the flag, and use GFP_ATOMIC unconditionally.

Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Enhance code to generically support cases where DMA rings
are greater than or equal to number of SPU engines.
New hardware has underlying DMA engine-FlexRM with 32 rings
which can be used to communicate to any of the available
10 SPU engines.
Signed-off-by: NRaveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

static checker warning:
        drivers/crypto/atmel-ecc.c:281 atmel_ecdh_done()
        warn: assigning (-22) to unsigned variable 'status'

Similar warning can be raised in atmel_ecc_work_handler()
when atmel_ecc_send_receive() returns an error. Fix this too.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ecdh_ctx contained static allocated data for the shared secret
and public key.

The shared secret and the public key were doomed to concurrency
issues because they could be shared by multiple crypto requests.

The concurrency is fixed by replacing per-tfm shared secret and
public key with per-request dynamically allocated shared secret
and public key.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

commit 720419f0 ("crypto: ccp - Introduce the AMD Secure Processor device")
moved the module registeration from ccp-dev.c to sp-dev.c but patch missed
removing the module version and author entry from ccp-dev.c.

It causes the below warning during boot when CONFIG_CRYPTO_DEV_SP_CCP=y
and CONFIG_CRYPTO_DEV_CCP_CRYPTO=y is set.

[ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version'
[ 0.187825] sysfs: cannot create duplicate filename '/module/ccp/version'

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary R Hook <gary.hook@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove xts(aes) speed tests with 2 x 192-bit keys, since implementations
adhering strictly to IEEE 1619-2007 standard cannot cope with key sizes
other than 2 x 128, 2 x 256 bits - i.e. AES-XTS-{128,256}:
[...]
tcrypt: test 5 (384 bit key, 16 byte blocks):
caam_jr 8020000.jr: key size mismatch
tcrypt: setkey() failed flags=200000
[...]
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Functions atmel_ecc_i2c_client_alloc and atmel_ecc_i2c_client_free are
local to the source and no not need to be in the global scope. Make
them static.

Cleans up sparse warnings:
symbol 'atmel_ecc_i2c_client_alloc' was not declared. Should it be static?
symbol 'atmel_ecc_i2c_client_free' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary static on local variable hdev. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:

before:
   text    data     bss     dec     hex filename
  14842    6464     128   21434    53ba drivers/crypto/img-hash.o

after:
   text    data     bss     dec     hex filename
  14789    6376      64   21229    52ed drivers/crypto/img-hash.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary static on local variable tdes_dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:

before:
   text    data     bss     dec     hex filename
  17079    8704     128   25911    6537 drivers/crypto/atmel-tdes.o

after:
   text    data     bss     dec     hex filename
  17039    8616      64   25719    6477 drivers/crypto/atmel-tdes.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary static on local variable sha_dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a significant difference in the object
file size. This log is the output of the size command, before and after
the code change:

before:
   text    data     bss     dec     hex filename
  30005   10264     128   40397    9dcd drivers/crypto/atmel-sha.o

after:
   text    data     bss     dec     hex filename
  29934   10208      64   40206    9d0e drivers/crypto/atmel-sha.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary static on local variable dd. Such variable
is initialized before being used, on every execution path throughout
the function. The static has no benefit and, removing it reduces the
object file size.

This issue was detected using Coccinelle and the following semantic patch:
https://github.com/GustavoARSilva/coccinelle/blob/master/static/static_unused.cocci

In the following log you can see a difference in the object file size.
This log is the output of the size command, before and after the code
change:

before:
   text    data     bss     dec     hex filename
  26135   11944     128   38207    953f drivers/crypto/omap-sham.o

after:
   text    data     bss     dec     hex filename
  26084   11856      64   38004    9474 drivers/crypto/omap-sham.o
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for using the caam/jr backend on DPAA2-based SoCs.
These have some particularities we have to account for:
-HW S/G format is different
-Management Complex (MC) firmware initializes / manages (partially)
the CAAM block: MCFGR, QI enablement in QICTL, RNG
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A version 5 CCP can handle an RSA modulus up to 16k bits.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Wire up the CCP as an RSA cipher provider.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Version 5 devices have requirements for buffer lengths, as well as
parameter format (e.g. bits vs. bytes). Fix the base CCP driver
code to meet requirements all supported versions.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Some updates this year have not had copyright dates changed in modified
files. Correct this for 2017.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Otherwise, we might be seeding the RNG using bad randomness, which is
dangerous. The one use of this function from within the kernel -- not
from userspace -- is being removed (keys/big_key), so that call site
isn't relevant in assessing this.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This module register a HASH module that support multiples
algorithms: MD5, SHA1, SHA224, SHA256.

It includes the support of HMAC hardware processing corresponding
to the supported algorithms. DMA or IRQ mode are used depending
on data length.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This adds documentation of device tree bindings for the STM32
HASH controller.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The complete stm32 module is rename as crypto
in order to use generic naming
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use the correct unregister_shashes function to
to remove the registered algo
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case of arm soc support, readl and writel will
be optimized using relaxed functions
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Reviewed-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

kill_fq removes a complete frame queue, it needs to free the qman_fq
in the last. Else kmemleak will report the below warning:

unreferenced object 0xffff800073085c80 (size 128):
  comm "cryptomgr_test", pid 199, jiffies 4294937850 (age 67.840s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 a0 80 7e 00 00 80 ff ff
    00 00 00 00 00 00 00 00 04 00 04 00 5c 01 00 00
  backtrace:
    [<ffff8000001e5760>] create_object+0xf8/0x258
    [<ffff800000994e38>] kmemleak_alloc+0x58/0xa0
    [<ffff8000001d5f18>] kmem_cache_alloc_trace+0x2c8/0x358
    [<ffff8000007e8410>] create_caam_req_fq+0x40/0x170
    [<ffff8000007e870c>] caam_drv_ctx_update+0x54/0x248
    [<ffff8000007fca54>] aead_setkey+0x154/0x300
    [<ffff800000452120>] setkey+0x50/0xf0
    [<ffff80000045b144>] __test_aead+0x5ec/0x1028
    [<ffff80000045c28c>] test_aead+0x44/0xc8
    [<ffff80000045c368>] alg_test_aead+0x58/0xd0
    [<ffff80000045bdb4>] alg_test+0x14c/0x308
    [<ffff8000004588e8>] cryptomgr_test+0x50/0x58
    [<ffff8000000c3b2c>] kthread+0xdc/0xf0
    [<ffff800000083c00>] ret_from_fork+0x10/0x50

And check where the function kill_fq() is called to remove
the additional kfree to qman_fq and avoid re-calling the released qman_fq.
Signed-off-by: NXulin Sun <xulin.sun@windriver.com>
Acked-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The updated memory management is described in the top part of the code.
As one benefit of the changed memory management, the AIO and synchronous
operation is now implemented in one common function. The AF_ALG
operation uses the async kernel crypto API interface for each cipher
operation. Thus, the only difference between the AIO and sync operation
types visible from user space is:

1. the callback function to be invoked when the asynchronous operation
   is completed

2. whether to wait for the completion of the kernel crypto API operation
   or not

The change includes the overhaul of the TX and RX SGL handling. The TX
SGL holding the data sent from user space to the kernel is now dynamic
similar to algif_skcipher. This dynamic nature allows a continuous
operation of a thread sending data and a second thread receiving the
data. These threads do not need to synchronize as the kernel processes
as much data from the TX SGL to fill the RX SGL.

The caller reading the data from the kernel defines the amount of data
to be processed. Considering that the interface covers AEAD
authenticating ciphers, the reader must provide the buffer in the
correct size. Thus the reader defines the encryption size.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The updated memory management is described in the top part of the code.
As one benefit of the changed memory management, the AIO and synchronous
operation is now implemented in one common function. The AF_ALG
operation uses the async kernel crypto API interface for each cipher
operation. Thus, the only difference between the AIO and sync operation
types visible from user space is:

1. the callback function to be invoked when the asynchronous operation
   is completed

2. whether to wait for the completion of the kernel crypto API operation
   or not

In addition, the code structure is adjusted to match the structure of
algif_aead for easier code assessment.

The user space interface changed slightly as follows: the old AIO
operation returned zero upon success and < 0 in case of an error to user
space. As all other AF_ALG interfaces (including the sync skcipher
interface) returned the number of processed bytes upon success and < 0
in case of an error, the new skcipher interface (regardless of AIO or
sync) returns the number of processed bytes in case of success.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When a user chooses a rng source via sysfs attribute
this rng should be sticky, even when other sources
with better quality to register. This patch introduces
a simple way to remember the user's choice. This is
reflected by a new sysfs attribute file 'rng_selected'
which shows if the current rng has been chosen by
userspace. The new attribute file shows '1' for user
selected rng and '0' otherwise.
Signed-off-by: NHarald Freudenberger <freude@linux.vnet.ibm.com>
Reviewed-by: NPrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch rewoks the hwrng to always use the
rng source with best entropy quality.

On registation and unregistration the hwrng now
tries to choose the best (= highest quality value)
rng source. The handling of the internal list
of registered rng sources is now always sorted
by quality and the top most rng chosen.
Signed-off-by: NHarald Freudenberger <freude@linux.vnet.ibm.com>
Reviewed-by: NPrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SELF condition has no meaning for the SERIAL sharing since the jobs
are executed in the same DECO.
Signed-off-by: NTudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Clean up the code, as indicated by Coccinelle.

Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NTudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sg_to_sec4_sg_len() is no longer used since
commit 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface")

Its functionality has been superseded by the usage of sg_nents_for_len()
returning the number of S/G entries corresponding to the provided length.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change log level for some prints from dev_info() to dev_dbg(), low-level
details are needed only when debugging.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sg_sw_sec4.h header is not used by caam/qi, thus remove its inclusion.
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since ARM64 commit 1dccb598 ("arm64: simplify dma_get_ops"),
dma_ops no longer default to swiotlb_dma_ops, but to dummy_dma_ops.

dma_ops have to be explicitly set in the driver - at least for ARM64.

Fixes: 67c2315d ("crypto: caam - add Queue Interface (QI) backend support")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Associated data (AD) length is read by CAAM from an S/G entry
that is initially filled by the GPP.
Accordingly, AD length has to be stored in CAAM endianness.

Fixes: b189817c ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

For more than 16 S/G entries, driver currently corrupts memory
on ARMv8, see below KASAN log.
Note: this does not reproduce on PowerPC due to different (smaller)
cache line size - 64 bytes on PPC vs. 128 bytes on ARMv8.

One such use case is one of the cbc(aes) test vectors - with 8 S/G
entries and src != dst. Driver needs 1 (IV) + 2 x 8 = 17 entries,
which goes over the 16 S/G entries limit:
(CAAM_QI_MEMCACHE_SIZE - offsetof(struct ablkcipher_edesc, sgt)) /
sizeof(struct qm_sg_entry) = 256 / 16 = 16 S/Gs

Fix this by:
-increasing object size in caamqicache pool from 512 to 768; this means
the maximum number of S/G entries grows from (at least) 16 to 32
(again, for ARMv8 case of 128-byte cache line)
-add checks in the driver to fail gracefully (ENOMEM) in case the 32 S/G
entries limit is exceeded

==================================================================
BUG: KASAN: slab-out-of-bounds in ablkcipher_edesc_alloc+0x4ec/0xf60
Write of size 1 at addr ffff800021cb6003 by task cryptomgr_test/1394

CPU: 3 PID: 1394 Comm: cryptomgr_test Not tainted 4.12.0-rc7-next-20170703-00023-g72badbcc1ea7-dirty #26
Hardware name: LS1046A RDB Board (DT)
Call trace:
[<ffff20000808ac6c>] dump_backtrace+0x0/0x290
[<ffff20000808b014>] show_stack+0x14/0x1c
[<ffff200008d62c00>] dump_stack+0xa4/0xc8
[<ffff200008264e40>] print_address_description+0x110/0x26c
[<ffff200008265224>] kasan_report+0x1d0/0x2fc
[<ffff2000082637b8>] __asan_store1+0x4c/0x54
[<ffff200008b4884c>] ablkcipher_edesc_alloc+0x4ec/0xf60
[<ffff200008b49304>] ablkcipher_encrypt+0x44/0xcc
[<ffff20000848a61c>] skcipher_encrypt_ablkcipher+0x120/0x138
[<ffff200008495014>] __test_skcipher+0xaec/0xe30
[<ffff200008497088>] test_skcipher+0x6c/0xd8
[<ffff200008497154>] alg_test_skcipher+0x60/0xe4
[<ffff2000084974c4>] alg_test.part.13+0x130/0x304
[<ffff2000084976d4>] alg_test+0x3c/0x68
[<ffff2000084938ac>] cryptomgr_test+0x54/0x5c
[<ffff20000810276c>] kthread+0x188/0x1c8
[<ffff2000080836c0>] ret_from_fork+0x10/0x50

Allocated by task 1394:
 save_stack_trace_tsk+0x0/0x1ac
 save_stack_trace+0x18/0x20
 kasan_kmalloc.part.5+0x48/0x110
 kasan_kmalloc+0x84/0xa0
 kasan_slab_alloc+0x14/0x1c
 kmem_cache_alloc+0x124/0x1e8
 qi_cache_alloc+0x28/0x58
 ablkcipher_edesc_alloc+0x244/0xf60
 ablkcipher_encrypt+0x44/0xcc
 skcipher_encrypt_ablkcipher+0x120/0x138
 __test_skcipher+0xaec/0xe30
 test_skcipher+0x6c/0xd8
 alg_test_skcipher+0x60/0xe4
 alg_test.part.13+0x130/0x304
 alg_test+0x3c/0x68
 cryptomgr_test+0x54/0x5c
 kthread+0x188/0x1c8
 ret_from_fork+0x10/0x50

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff800021cb5e00
 which belongs to the cache caamqicache of size 512
The buggy address is located 3 bytes to the right of
 512-byte region [ffff800021cb5e00, ffff800021cb6000)
The buggy address belongs to the page:
page:ffff7e0000872d00 count:1 mapcount:0 mapping:          (null)
index:0x0 compound_mapcount: 0
flags: 0xfffc00000008100(slab|head)
raw: 0fffc00000008100 0000000000000000 0000000000000000 0000000180190019
raw: dead000000000100 dead000000000200 ffff800931268200 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff800021cb5f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff800021cb5f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff800021cb6000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffff800021cb6080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff800021cb6100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Fixes: b189817c ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam/qi needs a fix similar to what was done for caam/jr in
commit "crypto: caam/qi - properly set IV after {en,de}crypt",
to allow for ablkcipher/skcipher chunking/streaming.

Cc: <stable@vger.kernel.org>
Fixes: b189817c ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Suggested-by: NDavid Gstir <david@sigma-star.at>
Signed-off-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>