Removed duplicate #include <linux/skbuff.h>	
Combined #ifdef __KERNEL__ blocks
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DaveM pointed out NPROTO exposed to userspace, so keep it around,
just make sure it stays in sync.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sorry for the patch sequence confusion :| but I found that the similar
thing can be done for raw sockets easily too late.

Expand the proto.h union with the raw_hashinfo member and use it in
raw_prot and rawv6_prot. This allows to drop the protocol specific
versions of hash and unhash callbacks.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After this we have only udp_lib_get_port to get the port and two 
stubs for ipv4 and ipv6. No difference in udp and udplite except
for initialized h.udp_hash member.

I tried to find a graceful way to drop the only difference between
udp_v4_get_port and udp_v6_get_port (i.e. the rcv_saddr comparison 
routine), but adding one more callback on the struct proto didn't 
appear such :( Maybe later.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inspired by the commit ab1e0a13 ([SOCK] proto: Add hashinfo member to 
struct proto) from Arnaldo, I made similar thing for UDP/-Lite IPv4 
and -v6 protocols.

The result is not that exciting, but it removes some levels of
indirection in udpxxx_get_port and saves some space in code and text.

The first step is to union existing hashinfo and new udp_hash on the
struct proto and give a name to this union, since future initialization 
of tcpxxx_prot, dccp_vx_protinfo and udpxxx_protinfo will cause gcc 
warning about inability to initialize anonymous member this way.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_options->is_data is assigned only and never checked. The structure is
not a part of kernel interface to the userspace. So, it is safe to remove
this field.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change TCP_DEFER_ACCEPT implementation so that it transitions a
connection to ESTABLISHED after handshake is complete instead of
leaving it in SYN-RECV until some data arrvies. Place connection in
accept queue when first data packet arrives from slow path.

Benefits:
  - established connection is now reset if it never makes it
   to the accept queue

 - diagnostic state of established matches with the packet traces
   showing completed handshake

 - TCP_DEFER_ACCEPT timeouts are expressed in seconds and can now be
   enforced with reasonable accuracy instead of rounding up to next
   exponential back-off of syn-ack retry.
Signed-off-by: NPatrick McManus <mcmanus@ducksong.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the inline trick (same as pr_debug) to get checking of debug
statements even if no code is generated.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the proc for tcp6 to be per namespace.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The proc init/exit functions take a new network namespace parameter in
order to register/unregister /proc/net/udp6 for a namespace.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch, like udp proc, makes the proc functions to take care of
which namespace the socket belongs.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes the common udp proc functions to take care of which
socket they should show taking into account the namespace it belongs.
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update: My mailer ate one of Jarek's feedback mails...  Fixed the
parameter in netif_set_gso_max_size() to be u32, not u16.  Fixed the
whitespace issue due to a patch import botch.  Changed the types from
u32 to unsigned int to be more consistent with other variables in the
area.  Also brought the patch up to the latest net-2.6.26 tree.

Update: Made gso_max_size container 32 bits, not 16.  Moved the
location of gso_max_size within netdev to be less hotpath.  Made more
consistent names between the sock and netdev layers, and added a
define for the max GSO size.

Update: Respun for net-2.6.26 tree.

Update: changed max_gso_frame_size and sk_gso_max_size from signed to
unsigned - thanks Stephen!

This patch adds the ability for device drivers to control the size of
the TSO frames being sent to them, per TCP connection.  By setting the
netdevice's gso_max_size value, the socket layer will set the GSO
frame size based on that value.  This will propogate into the TCP
layer, and send TSO's of that size to the hardware.

This can be desirable to help tune the bursty nature of TSO on a
per-adapter basis, where one may have 1 GbE and 10 GbE devices
coexisting in a system, one running multiqueue and the other not, etc.

This can also be desirable for devices that cannot support full 64 KB
TSO's, but still want to benefit from some level of segmentation
offloading.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race is SCTP between the loading of the module
and the access by the socket layer to the protocol functions.
In particular, a list of addresss that SCTP maintains is
not initialized prior to the registration with the protosw.
Thus it is possible for a user application to gain access
to SCTP functions before everything has been initialized.
The problem shows up as odd crashes during connection
initializtion when we try to access the SCTP address list.

The solution is to refactor how we do registration and
initialize the lists prior to registering with the protosw.
Care must be taken since the address list initialization
depends on some other pieces of SCTP initialization.  Also
the clean-up in case of failure now also needs to be refactored.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Acked-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some drivers need to reserve all PCI BARs to prevent other drivers
misusing unoccupied BARs.  pcim_iomap_regions_request_all() requests
all BARs and iomap specified BARs.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

There is a race in virtio_net, dealing with disabling/enabling the callback.
I saw the following oops:

kernel BUG at /space/kvm/drivers/virtio/virtio_ring.c:218!
illegal operation: 0001 [#1] SMP
Modules linked in: sunrpc dm_mod
CPU: 2 Not tainted 2.6.25-rc1zlive-host-10623-gd358142-dirty #99
Process swapper (pid: 0, task: 000000000f85a610, ksp: 000000000f873c60)
Krnl PSW : 0404300180000000 00000000002b81a6 (vring_disable_cb+0x16/0x20)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:3 PM:0 EA:3
Krnl GPRS: 0000000000000001 0000000000000001 0000000010005800 0000000000000001
           000000000f3a0900 000000000f85a610 0000000000000000 0000000000000000
           0000000000000000 000000000f870000 0000000000000000 0000000000001237
           000000000f3a0920 000000000010ff74 00000000002846f6 000000000fa0bcd8
Krnl Code: 00000000002b819a: a7110001           tmll    %r1,1
           00000000002b819e: a7840004           brc     8,2b81a6
           00000000002b81a2: a7f40001           brc     15,2b81a4
          >00000000002b81a6: a51b0001           oill    %r1,1
           00000000002b81aa: 40102000           sth     %r1,0(%r2)
           00000000002b81ae: 07fe               bcr     15,%r14
           00000000002b81b0: eb7ff0380024       stmg    %r7,%r15,56(%r15)
           00000000002b81b6: a7f13e00           tmll    %r15,15872
Call Trace:
([<000000000fa0bcd0>] 0xfa0bcd0)
 [<00000000002b8350>] vring_interrupt+0x5c/0x6c
 [<000000000010ab08>] do_extint+0xb8/0xf0
 [<0000000000110716>] ext_no_vtime+0x16/0x1a
 [<0000000000107e72>] cpu_idle+0x1c2/0x1e0

The problem can be triggered with a high amount of host->guest traffic.
I think its the following race:

poll says netif_rx_complete
poll calls enable_cb
enable_cb opens the interrupt mask
a new packet comes, an interrupt is triggered----\
enable_cb sees that there is more work           |
enable_cb disables the interrupt                 |
       .                                         V
       .                            interrupt is delivered
       .                            skb_recv_done does atomic napi test, ok
 some waiting                       disable_cb is called->check fails->bang!
       .
poll would do napi check
poll would do disable_cb

The fix is to let enable_cb not disable the interrupt again, but expect the
caller to do the cleanup if it returns false. In that case, the interrupt is
only disabled, if the napi test_set_bit was successful.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned up doco)

This patch introduces struct smc91x_platdata and modifies the driver so
bus width is checked during run time using SMC_nBIT() instead of
SMC_CAN_USE_nBIT.

V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Commit a0c1e907 added code to futex.c
to detect whether futex_atomic_cmpxchg_inatomic was implemented at run
time:

+       curval = cmpxchg_futex_value_locked(NULL, 0, 0);
+       if (curval == -EFAULT)
+               futex_cmpxchg_enabled = 1;

This is bogus on parisc, since page zero in kernel virtual space is the
gateway page for syscall entry, and should not be read from the kernel.
(That, and we really don't like the kernel faulting on its own address
 space...)
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Cleanup some cruft. No functionality changes.
Signed-off-by: NRandolph Chung <tausq@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Commit 721fdf34 introduced a subtle bug
by accidently removing the "static" from iodc_dbuf. This resulted in, what
appeared to be, a trap without *current set to a task. Probably the result of
a trap in real mode while calling firmware.

Also do other misc clean ups. Since the only input from firmware is non
blocking, share iodc_dbuf between input and output, and spinlock the
only callers.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

oops, forgot this in the previous commit.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Commit 2f569afd broke the compile
rather spectacularly. Fix code errors.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

They make way more sense here, really...
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

The comments in the definition of struct export_operations don't match the
current members.

Add a comment for the 2 new functions and remove 2 comments for unused ones.
Signed-off-by: NMarc Dionne <marc.c.dionne@gmail.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support for reading/writing the SPROM invariants
for PCMCIA based devices.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Al Viro wrote:
>
> 	After that commit in asm-h8300/uaccess.h we have
>
> #define get_user(x, ptr)                                        \
> ({                                                              \
>     int __gu_err = 0;                                           \
>     uint32_t __gu_val = 0;                              \
>     ^^^^^^^^^^^^^^^^^
>     switch (sizeof(*(ptr))) {                                   \
>     case 1:                                                     \
>     case 2:                                                     \
>     case 4:                                                     \
>         __gu_val = *(ptr);                                      \
>         break;                                                  \
>     case 8:                                                     \
>         memcpy(&__gu_val, ptr, sizeof (*(ptr)));                \
>                                ^^^^^^^^^^^^^^^^
>
> which, of course, is FUBAR whenever we actually hit that case - memcpy of
> 8 bytes into uint32_t is obviously wrong.  Why don't we simply do

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

PCI busses can be registered multiple times, so we need to detect if we
have registered our bus structure in sysfs already.  If so, don't do it
again.

Thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for reporting
the problem, and to Linus for poking me to get me to believe that it was
a real problem.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Comparing with kernel 2.6.24, tbench result has regression with
2.6.25-rc1.

1) On 2 quad-core processor stoakley: 4%.
2) On 4 quad-core processor tigerton: more than 30%.

bisect located below patch.

b4ce9277 is first bad commit
commit b4ce9277
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date:   Tue Nov 13 21:33:32 2007 -0800

    [IPV6]: Move nfheader_len into rt6_info

    The dst member nfheader_len is only used by IPv6.  It's also currently
    creating a rather ugly alignment hole in struct dst.  Therefore this patch
    moves it from there into struct rt6_info.

Above patch changes the cache line alignment, especially member
__refcnt. I did a testing by adding 2 unsigned long pading before
lastuse, so the 3 members, lastuse/__refcnt/__use, are moved to next
cache line. The performance is recovered.

I created a patch to rearrange the members in struct dst_entry.

With Eric and Valdis Kletnieks's suggestion, I made finer arrangement.

1) Move tclassid under ops in case CONFIG_NET_CLS_ROUTE=y. So
   sizeof(dst_entry)=200 no matter if CONFIG_NET_CLS_ROUTE=y/n. I
   tested many patches on my 16-core tigerton by moving tclassid to
   different place. It looks like tclassid could also have impact on
   performance.  If moving tclassid before metrics, or just don't move
   tclassid, the performance isn't good. So I move it behind metrics.

2) Add comments before __refcnt.

On 16-core tigerton:

If CONFIG_NET_CLS_ROUTE=y, the result with below patch is about 18%
better than the one without the patch;

If CONFIG_NET_CLS_ROUTE=n, the result with below patch is about 30%
better than the one without the patch.

With 32bit 2.6.25-rc1 on 8-core stoakley, the new patch doesn't
introduce regression.

Thank Eric, Valdis, and David!
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Acked-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When building drivers/macintosh/mediabay.c if CONFIG_ADB_PMU isn't
defined we get:

drivers/built-in.o: In function `media_bay_step':
mediabay.c:(.text+0x92b84): undefined reference to `pmu_suspend'
mediabay.c:(.text+0x92c08): undefined reference to `pmu_resume'

Create empty place holders in that scenario.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

pmu_sys_suspended is declared extern when:
	defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
but only defined when:
	defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
which is wrong.  Let's fix that.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It was all wrapped in '#ifdef CONFIG_BLOCK' anyway, so userspace was
getting nothing useful out of it. And the special #ifndef __KERNEL__
version of 'struct partition' makes me inclined to promote an attitude
of violence...

Stick some comments on some of the #endifs too, while we're at it.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>