- 17 1月, 2018 14 次提交
-
-
由 Jin Yao 提交于
Previously it was only allowed to use at most 10 time slices in 'perf script --time'. This patch removes this limitation. For example, following command line is OK (12 time slices) perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12 Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com [ No need to check for NULL to call free, use zfree ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
Previously it was only allowed to use at most 10 time slices in 'perf report --time'. This patch removes this limitation. For example, following command line is OK (12 time slices) perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12 Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com [ No need to check for NULL to call free, use zfree ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
Previously we use a magic number 10 to limit the number of time slices. It's not very good. This patch creates a new function perf_time__range_alloc() to allocate time slices buffer. The number of buffer entries is determined by the number of comma in string but at least it will allocate one entry even if no comma is found. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-7-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
Add a time slices indication to the perf report header. For example, # perf report --stdio --time 10% # Total Lost Samples: 0 # # Samples: 9K of event 'cycles:ppp' (time slices: 10%) # Event count (approx.): 8951288803 Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Suggested--by: NArnaldo Carvalho de Melo <acme@redhat.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-6-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
Previously, the time percent slice needs an index to specify which one the user wants. It may be easier to use if the index can be omitted. So with this patch, for example, perf report --stdio --time 10%/1 should be equivalent to perf report --stdio --time 10% Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Suggested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-5-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
The command line like 'perf report --stdio --time 1abc%/1' could be accepted by perf. It looks not very good. This patch uses strtod() to replace original atof() and check the entire string. Now for the same command line, it would return error message "Invalid time string". root@skl:/tmp# perf report --stdio --time 1abc%/1 Invalid time string Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
The following message will be returned to user when executing 'perf script --time' if perf data file doesn't contain the first/last sample time. "HINT: no first/last sample time found in perf data. Please use latest perf binary to execute 'perf record' (if '--buildid-all' is enabled, needs to set '--timestamp-boundary')." Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-3-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
The following message will be returned to user when executing 'perf report --time' if perf data file doesn't contain the first/last sample time. "HINT: no first/last sample time found in perf data. Please use latest perf binary to execute 'perf record' (if '--buildid-all' is enabled, needs to set '--timestamp-boundary')." Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-2-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
When we use a global DWARF setting as in: perf record --call-graph dwarf According to 5c0cf224 ("perf record: Store data mmaps for dwarf unwind") we need to set up some extra perf_event_attr bits. But when we instead do a per event dwarf setting: perf record -e cycles/call-graph=dwarf/ This was not being done, make them equivalent. This didn't produce any output changes in my tests while fixing up loose ends in the per-event settings, I found it just by comparing the perf_event_attr fields trying to find an explanation for those problems. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Noel Grandin <noelgrandin@gmail.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-6476r53h2o38skbs9qa4ust4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The per-event max-stack setting wasn't overriding the global --max-stack setting: # perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf,max-stack=2/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.072 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.072/0.072/0.072/0.000 ms 0.000 probe_libc:inet_pton:(7feb7a998350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa39b6108f3f] (/usr/bin/ping) # Fix it: # perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf,max-stack=2/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.073 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.073/0.073/0.073/0.000 ms 0.000 probe_libc:inet_pton:(7f1083221350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ic3g837xg8ob3kcpkspxwz0g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
If we use: perf trace --max-stack=4 then the syscall events will use DWARF callchains, when available (libunwind enabled in the build) and the printing will stop at 4 levels. When we introduced support for tracepoint events this ended up not applying for them, fix it. Before: # perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms 0.000 probe_libc:inet_pton:(7fc6c2a16350)) # After: # perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.087 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.087/0.087/0.087/0.000 ms 0.000 probe_libc:inet_pton:(7fbf9a041350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa947cb67f3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa947cb68379] (/usr/bin/ping) # Reported-by: NThomas Richter <tmricht@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-afsu9eegd43ppihiuafhh9qv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
When setting up DWARF callchains on specific events, without using 'record' or 'trace' --call-graph, but instead doing it like: perf trace -e cycles/call-graph=dwarf/ The unwind__prepare_access() call in thread__insert_map() when we process PERF_RECORD_MMAP(2) metadata events were not being performed, precluding us from using per-event DWARF callchains, handling them just when we asked for all events to be DWARF, using "--call-graph dwarf". We do it in the PERF_RECORD_MMAP because we have to look at one of the executable maps to figure out the executable type (64-bit, 32-bit) of the DSO laid out in that mmap. Also to look at the architecture where the perf.data file was recorded. All this probably should be deferred to when we process a sample for some thread that has callchains, so that we do this processing only for the threads with samples, not for all of them. For now, fix using DWARF on specific events. Before: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms 0.000 probe_libc:inet_pton:(7fe9597bb350)) Problem processing probe_libc:inet_pton callchain, skipping... # After: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms 0.000 probe_libc:inet_pton:(7fd4aa930350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa804e51af3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa804e51b379] (/usr/bin/ping) # # perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms 0.000 probe_libc:inet_pton:(7f9363b9e350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffa9e8a14e0f3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffa9e8a14e1379] (/usr/bin/ping) # # perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms 0.000 probe_libc:inet_pton:(7f4947e1c350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa716d88ef3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa716d88f379] (/usr/bin/ping) # # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms 0.000 probe_libc:inet_pton:(7fa157696350)) __GI___inet_pton (/usr/lib64/libc-2.26.so) getaddrinfo (/usr/lib64/libc-2.26.so) [0xffffa9ba39c74f40] (/usr/bin/ping) # Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
When setting the "dwarf" unwinder for a specific event and not specifying the max-stack, the attr.sample_max_stack ended up using an uninitialized callchain_param.max_stack, fix it by using designated initializers for that callchain_param variable, zeroing all non explicitely initialized struct members. Here is what happened: # perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 callchain: type DWARF callchain: stack dump size 8192 perf_event_attr: type 2 size 112 config 0x730 { sample_period, sample_freq } 1 sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC exclude_callchain_user 1 { wakeup_events, wakeup_watermark } 1 sample_regs_user 0xff0fff sample_stack_user 8192 sample_max_stack 50656 sys_perf_event_open failed, error -75 Value too large for defined data type # perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 callchain: type DWARF callchain: stack dump size 8192 perf_event_attr: type 2 size 112 config 0x730 sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC exclude_callchain_user 1 sample_regs_user 0xff0fff sample_stack_user 8192 sample_max_stack 30448 sys_perf_event_open failed, error -75 Value too large for defined data type # Now the attr.sample_max_stack is set to zero and the above works as expected: # perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.072 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.072/0.072/0.072/0.000 ms 0.000 probe_libc:inet_pton:(7feb7a998350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa39b6108f3f] (/usr/bin/ping) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-is9tramondqa9jlxxsgcm9iz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Kim Phillips 提交于
'perf record' and 'perf report --dump-raw-trace' supported in this release. Example usage: # perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000 # perf report --dump-raw-trace Note that the perf.data file is portable, so the report can be run on another architecture host if necessary. Output will contain raw SPE data and its textual representation, such as: 0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1 . . ... ARM SPE data: size 2097152 bytes . 00000000: 49 00 LD . 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0 . 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1 . 00000014: 9a 00 00 LAT 0 XLAT . 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1 . 00000022: 98 00 00 LAT 0 TOT . 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000002e: 49 00 LD . 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80 . 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1 . 00000042: 9a 00 00 LAT 0 XLAT . 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS . 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1 . 00000050: 98 00 00 LAT 0 TOT . 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558 . 0000005c: 48 00 INSN-OTHER . 0000005e: 42 02 EV RETIRED . 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1 . 00000069: 98 00 00 LAT 0 TOT . 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481 ... Other release notes: - applies to acme's perf/{core,urgent} branches, likely elsewhere - Report is self-contained within the tool. Record requires enabling the kernel SPE driver by setting CONFIG_ARM_SPE_PMU. - The intel-bts implementation was used as a starting point; its min/default/max buffer sizes and power of 2 pages granularity need to be revisited for ARM SPE - Recording across multiple SPE clusters/domains not supported - Snapshot support (record -S), and conversion to native perf events (e.g., via 'perf inject --itrace'), are also not supported - Technically both cs-etm and spe can be used simultaneously, however disabled for simplicity in this release Signed-off-by: NKim Phillips <kim.phillips@arm.com> Reviewed-by: NDongjiu Geng <gengdongjiu@huawei.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 1月, 2018 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The raw_syscalls:sys_{enter,exit} were first supported in 'perf trace', together with minor and major page faults, then we supported --call-graph, then --max-stack, but when the other tracepoints got supported, and bpf, etc, I forgot to make those global call-graph settings apply to them. Fix it by realizing that the global --max-stack and --call-graph settings are done via: OPT_CALLBACK(0, "call-graph", &trace.opts, "record_mode[,record_size]", record_callchain_help, &record_parse_callchain_opt), And then, when we go to parse the events in -e via: OPT_CALLBACK('e', "event", &trace, "event", "event/syscall selector. use 'perf list' to list available events", trace__parse_events_option), And trace__parse_sevents_option() calls: struct option o = OPT_CALLBACK('e', "event", &trace->evlist, "event", "event selector. use 'perf list' to list available events", parse_events_option); err = parse_events_option(&o, lists[0], 0); parse_events_option() will override the global --call-graph and --max-stack if the "call-graph" and/or "max-stack" terms are in the event definition, such as in the probe_libc:inet_pton event in one of the examples below (-e probe_libc:inet_pton/max-stack=2). Before: # perf trace --mmap 1024 --call-graph dwarf -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1 1.525 ( ): probe_libc:inet_pton:(7f77f3ac9350)) PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.071 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.071/0.071/0.071/0.000 ms 1.677 ( 0.081 ms): ping/31296 sendto(fd: 3, buff: 0x55681b652720, len: 64, addr: 0x55681b650640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa97e4bc9cef] (/usr/bin/ping) [0xffffaa97e4bc656d] (/usr/bin/ping) [0xffffaa97e4bc7d0a] (/usr/bin/ping) [0xffffaa97e4bca447] (/usr/bin/ping) [0xffffaa97e4bc2f91] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa97e4bc3379] (/usr/bin/ping) # After: # perf trace --mmap 1024 --call-graph dwarf -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.089 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.089/0.089/0.089/0.000 ms 1.955 ( ): probe_libc:inet_pton:(7f383a311350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) [0xffffaa5d91444f3f] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa5d91445379] (/usr/bin/ping) 2.140 ( 0.101 ms): ping/32047 sendto(fd: 3, buff: 0x55a26edd0720, len: 64, addr: 0x55a26edce640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa5d9144bcef] (/usr/bin/ping) [0xffffaa5d9144856d] (/usr/bin/ping) [0xffffaa5d91449d0a] (/usr/bin/ping) [0xffffaa5d9144c447] (/usr/bin/ping) [0xffffaa5d91444f91] (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) [0xffffaa5d91445379] (/usr/bin/ping) # Same thing for --max-stack, the global one: # perf trace --max-stack 3 -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.097 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.097/0.097/0.097/0.000 ms 1.577 ( ): probe_libc:inet_pton:(7f32f3957350)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) __GI_getaddrinfo (inlined) 1.738 ( 0.108 ms): ping/32103 sendto(fd: 3, buff: 0x55c3132d7720, len: 64, addr: 0x55c3132d5640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa3cecf44cef] (/usr/bin/ping) [0xffffaa3cecf4156d] (/usr/bin/ping) # And then setting up a global setting (dwarf, max-stack=4), that will affect the raw_syscall:sys_enter for the 'sendto' syscall and that will be overriden in the probe_libc:inet_pton call to just one entry. # perf trace --max-stack=4 --call-graph dwarf -e sendto -e probe_libc:inet_pton/max-stack=1/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.090 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.090/0.090/0.090/0.000 ms 2.140 ( ): probe_libc:inet_pton:(7f9fe9337350)) __GI___inet_pton (/usr/lib64/libc-2.26.so) 2.283 ( 0.103 ms): ping/31804 sendto(fd: 3, buff: 0x55c7f3e19720, len: 64, addr: 0x55c7f3e17640, addr_len: 28) = 64 __libc_sendto (/usr/lib64/libc-2.26.so) [0xffffaa380c402cef] (/usr/bin/ping) [0xffffaa380c3ff56d] (/usr/bin/ping) [0xffffaa380c400d0a] (/usr/bin/ping) # Install iputils-debuginfo to get those /usr/bin/ping addresses resolved, those routines are not on its .dymsym nor .symtab :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-qgl2gse8elhh9zztw4ajopg3@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
The construct: if (callchain_param) perf_evsel__config_callchain(evsel, opts, &callchain_param); happens in several places, so make perf_evsel__config_callchain() work just like free(NULL), do nothing if param->enabled is not set. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ykk0qzxnxwx3o611ctjnmxav@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
We need to increase output offset in each iteration, not decrease it as we currently do. I guess we were lucky to finish in most cases in first iteration, so the bug never showed. However it shows a lot when working with big (~4GB) size data. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 9c9f5a2f ("perf tools: Introduce copyfile_offset() function") Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Since 75562573 ("perf tools: Add support for PERF_SAMPLE_IDENTIFIER") we don't need explicitely set PERF_SAMPLE_IDENTIFIER, as perf_evlist__config() will do this for us, i.e. when there are more than one evsel in an evlist, it will check if some evsel has a sample_type different than the one on the first evsel in the list, setting PERF_SAMPLE_IDENTIFIER in that case. So, to simplify 'perf trace' codebase, ditch that check. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-12xq6orhwttee2tdtu96ucrp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 1月, 2018 2 次提交
-
-
由 Kan Liang 提交于
There could be different types of memory in the system. E.g normal System Memory, Persistent Memory. To understand how the workload maps to those memories, it's important to know the I/O statistics of them. Perf can collect physical addresses, but those are raw data. It still needs extra work to resolve the physical addresses. Provide a script to facilitate the physical addresses resolving and I/O statistics. Profile with MEM_INST_RETIRED.ALL_LOADS or MEM_UOPS_RETIRED.ALL_LOADS event if any of them is available. Look up the /proc/iomem and resolve the physical address. Provide memory type summary. Here is an example output: # perf script report mem-phys-addr Event: mem_inst_retired.all_loads:P Memory type count percentage ---------------------------------------- ----------- ----------- System RAM 74 53.2% Persistent Memory 55 39.6% N/A --- Changes since V2: - Apply the new license rules. - Add comments for globals Changes since V1: - Do not mix DLA and Load Latency. Do not compare the loads and stores. Only profile the loads. - Use event name to replace the RAW event Signed-off-by: NKan Liang <Kan.liang@intel.com> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/r/1515099595-34770-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Luis de Bethencourt 提交于
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: NLuis de Bethencourt <luisbg@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180111155020.9782-1-luisbg@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 1月, 2018 1 次提交
-
-
由 Mathieu Poirier 提交于
Commit ("d0565132 perf evsel: Enable type checking for perf_evsel_config_term types") assumes PERF_EVSEL__CONFIG_TERM_DRV_CFG isn't used and as such adds a BUG_ON(). Since the enumeration type is used in macro ADD_CONFIG_TERM() the change break CoreSight trace acquisition. This patch restores the original code. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: d0565132 ("perf evsel: Enable type checking for perf_evsel_config_term types") Link: http://lkml.kernel.org/r/1515617211-32024-1-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 1月, 2018 6 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Similar to --tasks, producing the same output plus /proc/<PID>/maps similar lines for each mmap record present in a perf.data file. Please note that not all mmaps are stored, for instance, some of the non-executable mmaps are only stored when 'perf record --data' is used, when the user wants to resolve data accesses in addition to asking for executable mmaps to get the DSO with symtabs. E.g.: # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ] [root@jouet ~]# perf report --mmaps # pid tid ppid comm 0 0 -1 |swapper 4137 4137 -1 |sleep 5628a35a1000-5628a37aa000 r-xp 00000000 3147148 /usr/bin/sleep 7fb65ad51000-7fb65b134000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7fb65b134000-7fb65b35e000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7ffd94b9f000-7ffd94ba1000 r-xp 00000000 0 [vdso] # # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (8 samples) ] # perf report --mmaps # pid tid ppid comm 0 0 -1 |swapper 4161 4161 -1 |sleep 55afae69a000-55afae8a3000 r-xp 00000000 3147148 /usr/bin/sleep 7f569f00d000-7f569f3f0000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7f569f3f0000-7f569f61a000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7fff6fffe000-7fff70000000 r-xp 00000000 0 [vdso] # # perf record time sleep 1 0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 2156maxresident)k 0inputs+0outputs (0major+73minor)pagefaults 0swaps [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ] # perf report --mmaps # pid tid ppid comm 0 0 -1 |swapper 4281 4281 -1 |time 560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time 7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso] 4282 4282 4281 | sleep 560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time 564b4de3c000-564b4e045000 r-xp 00000000 3147148 /usr/bin/sleep 7f6a5a716000-7f6a5aaf9000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7f6a5aaf9000-7f6a5ad23000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so 7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so 7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso] 7ffcec7e6000-7ffcec7e8000 r-xp 00000000 0 [vdso] # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zulwdlg5rfowogr1qznorvvc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jiri Olsa 提交于
Add --tasks option to display monitored tasks stored in perf.data. Displaying pid/tid/ppid plus the command string aligned to distinguish parent and child tasks. $ perf record -a ... $ perf report --tasks # pid tid ppid comm 0 0 -1 |swapper 2 2 0 | kthreadd 14080 14080 2 | kworker/u17:1 4 4 2 | kworker/0:0H 6 6 2 | mm_percpu_wq ... 1 1 0 | systemd 23242 23242 1 | firefox 23242 23298 23242 | Cache2 I/O 23242 23304 23242 | GMPThread ... 1195 1195 1 | login 1611 1611 1195 | bash 1639 1639 1611 | startx 1663 1663 1639 | xinit 1673 1673 1663 | xmonad-x86_64-l 23939 23939 1673 | xterm 23941 23941 23939 | bash 23963 23963 23941 | mutt 24954 24954 23963 | offlineimap Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-13-jolsa@kernel.org [ Make it --tasks, plural, --task works as well, as its unambiguous ] [ Use machine__find_thread(), not findnew(), as pointed out by Namhyung ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
Before: # trace -a -e gettid sleep 0.01 <SNIP> 4.863 ( 0.005 ms): Chrome_ChildIO/26241 gettid() = 26241 4.931 ( 0.004 ms): Chrome_IOThrea/26154 gettid() = 26154 4.942 ( 0.001 ms): Chrome_IOThrea/26154 gettid() = 26154 4.946 ( 0.001 ms): Chrome_IOThrea/26154 gettid() = 26154 4.970 ( 0.002 ms): Chrome_IOThrea/26154 gettid() = 26154 # After: # trace -a -e gettid sleep 0.01 0.000 ( 0.009 ms): Chrome_IOThrea/26154 gettid() = 26154 (Chrome_IOThread) <SNIP> 3.416 ( 0.002 ms): Chrome_ChildIO/26241 gettid() = 26241 (Chrome_ChildIOT) 3.424 ( 0.001 ms): Chrome_ChildIO/26241 gettid() = 26241 (Chrome_ChildIOT) 3.343 ( 0.002 ms): chrome/26116 gettid() = 26116 (chrome) 3.386 ( 0.002 ms): Chrome_IOThrea/26154 gettid() = 26154 (Chrome_IOThread) 4.003 ( 0.003 ms): Chrome_ChildIO/26241 gettid() = 26241 (Chrome_ChildIOT) 4.031 ( 0.002 ms): Chrome_IOThrea/26154 gettid() = 26154 (Chrome_IOThread) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kyg4gz2yy0vkrrh2vtq29u71@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jiri Olsa 提交于
Add --stats option to display quick data statistics of event numbers, without any further processing, like the one at the end of the perf report -D command. $ perf report --stat Aggregated stats: TOTAL events: 4566 MMAP events: 113 LOST events: 19 COMM events: 3 FORK events: 400 SAMPLE events: 3315 MMAP2 events: 32 FINISHED_ROUND events: 681 THREAD_MAP events: 1 CPU_MAP events: 1 TIME_CONV events: 1 I found this useful when hunting lost events for another change. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-12-jolsa@kernel.org [ Rename it to --stats, plural ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jiri Olsa 提交于
I want to display the pure events status coming in the next patch and the tool's warnings are superfluous in the output. Making it optional, enabled by default. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-11-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding option to display lost events: $ perf script --show-lost-events ... mplayer 13810 [002] 468011.402396: 100 cycles:ppp: ff.. mplayer 13810 [002] 468011.402396: PERF_RECORD_LOST lost 3880 mplayer 13810 [002] 468011.402397: 100 cycles:ppp: ff.. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-10-jolsa@kernel.org [ Use PRIu64 when printing u64 values, fixing the build in some arches ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 08 1月, 2018 13 次提交
-
-
由 Jiri Olsa 提交于
Adding support to display sample misc field in form of letter for each bit: # perf script -F +misc ... sched-messaging 1414 K 28690.636582: 4590 cycles ... sched-messaging 1407 U 28690.636600: 325620 cycles ... sched-messaging 1414 K 28690.636608: 19473 cycles ... misc field __________/ The misc bits are assigned to following letters: PERF_RECORD_MISC_KERNEL K PERF_RECORD_MISC_USER U PERF_RECORD_MISC_HYPERVISOR H PERF_RECORD_MISC_GUEST_KERNEL G PERF_RECORD_MISC_GUEST_USER g PERF_RECORD_MISC_MMAP_DATA* M PERF_RECORD_MISC_COMM_EXEC E PERF_RECORD_MISC_SWITCH_OUT S Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-9-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Display namespaces bit in -vv debug display: $ perf record -vv --namespaces ... ... perf_event_attr: size 112 ... namespaces 1 Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-3-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jiri Olsa 提交于
There's no reason anymore to treat babel trace in a special way, because a) we no longer display its state b) the needed babeltrace library is now out and well adopted among distros. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-2-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jin Yao 提交于
perf script has a --time option to limit the time range of output. It only supports absolute time. Now this option is extended to support multiple time ranges and support the percent of time. For example: 1. Select the first and second 10% time slices: perf script --time 10%/1,10%/2 2. Select from 0% to 10% and 30% to 40% slices: perf script --time 0%-10%,30%-40% Changelog: v6: Fix the merge issue with latest perf/core branch. No functional changes. v5: Add checking of first/last sample time to detect if it's recorded in perf.data. If it's not recorded, returns error message to user. v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample v3: Since the definitions of first_sample_time/last_sample_time are moved from perf_session to perf_evlist so change the related code. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-7-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
perf report has a --time option to limit the time range of output. It only supports absolute time. Now this option is extended to support multiple time ranges and support the percent of time. For example: 1. Select the first and second 10% time slices: perf report --time 10%/1,10%/2 2. Select from 0% to 10% and 30% to 40% slices: perf report --time 0%-10%,30%-40% Changelog: v6: Fix the merge issue with latest perf/core branch. No functional changes. v5: Add checking of first/last sample time to detect if it's recorded in perf.data. If it's not recorded, returns error message to user. v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample v3: Since the definitions of first_sample_time/last_sample_time are moved from perf_session to perf_evlist so change the related code. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-6-git-send-email-yao.jin@linux.intel.com [ Add missing colons at end of examples in the man page ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
Previous patch supports the multiple time range. For example, select the first and second 10% time slices. perf report --time 10%/1,10%/2 We need a function to check if a timestamp is in the ranges of [0, 10%) and [10%, 20%]. Note that it includes the last element in [10%, 20%] but it doesn't include the last element in [0, 10%). It's to avoid the overlap. This patch implments a new function perf_time__ranges_skip_sample for this checking. Change log: v4: Let perf_time__ranges_skip_sample be compatible with perf_time__skip_sample when only one time range. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-5-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
Current perf report/script/... have a --time option to limit the time range of output. But right now it only supports absolute time, add support for time percentage. For example: 1. Select the second 10% time slice perf report --time 10%/2 2. Select from 0% to 10% time slice perf report --time 0%-10% It also support the multiple time ranges. 3. Select the first and second 10% time slices perf report --time 10%/1,10%/2 4. Select from 0% to 10% and 30% to 40% slices perf report --time 0%-10%,30%-40% Changelog: v4: An issue is found. Following passes. perf script --time 10%/10x12321xsdfdasfdsafdsafdsa Now it uses strtol to replace atoi. Committer notes: This just puts in place the infrastructure, so the examples in this cset comment will only work later, after more patches in this series are applied. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-4-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
In the default 'perf record' configuration, all samples are processed, to create the HEADER_BUILD_ID table. So it's very easy to get the first/last samples and save the time to perf file header via the function write_sample_time(). Later, at post processing time, perf report/script will fetch the time from perf file header. Committer testing: # perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ] [root@jouet home]# perf report --header | grep "time of " # time of first sample : 22947.909226 # time of last sample : 22948.910704 # # perf report -D | grep PERF_RECORD_SAMPLE\( 0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0 0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0 <SNIP> 3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0 0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0 2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0 # Changelog: v7: Just update the patch description according to Arnaldo's suggestion. v6: Currently '--buildid-all' is not enabled at default. So the walking on all samples is the default operation. There is no big overhead to calculate the timestamp boundary in process_sample_event handler once we already go through all samples. So the timestamp boundary calculation is enabled by default when '--buildid-all' is not enabled. While if '--buildid-all' is enabled, we creates a new option "--timestamp-boundary" for user to decide if it enables the timestamp boundary calculation. v5: There is an issue that the sample walking can only work when '--buildid-all' is not enabled. So we need to let the walking be able to work even if '--buildid-all' is enabled and let the processing skips the dso hit marking for this case. At first, I want to provide a new option "--record-time-boundaries". While after consideration, I think a new option is not very necessary. v3: Remove the definitions of first_sample_time and last_sample_time from struct record and directly save them in perf_evlist. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
perf report/script/... have a --time option to limit the time range of output. That's very useful to slice large traces, e.g. when processing the output of perf script for some analysis. But right now --time only supports absolute time. Also there is no fast way to get the start/end times of a given trace except for looking at it. This makes it hard to e.g. only decode the first half of the trace, which is useful for parallelization of scripts Another problem is that perf records are variable size and there is no synchronization mechanism. So the only way to find the last sample reliably would be to walk all samples. But we want to avoid that in perf report/... because it is already quite expensive. That is why storing the first sample time and last sample time in perf record is better. This patch creates a new header feature type HEADER_SAMPLE_TIME and related ops. Save the first sample time and the last sample time to the feature section in perf file header. That will be done when, for instance, processing build-ids, where we already have to process all samples to create the build-id table, take advantage of that to further amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf report/script' faster when using --time. Committer testing: After this patch is applied the header is written with zeroes, we need the next patch, for "perf record" to actually write the timestamps: # perf report -D | grep PERF_RECORD_SAMPLE\( 22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0 <SNIP> 22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0 # perf report --header | grep "time of " # time of first sample : 0.000000 # time of last sample : 0.000000 # Changelog: v7: 1. Rebase to latest perf/core branch. 2. Add following clarification in patch description according to Arnaldo's suggestion. "That will be done when, for instance, processing build-ids, where we already have to process all samples to create the build-id table, take advantage of that to further amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf report/script' faster when using --time." v4: Use perf script time style for timestamp printing. Also add with the printing of sample duration. v3: Remove the definitions of first_sample_time/last_sample_time from perf_session. Just define them in perf_evlist Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
When enabling '-b' option in perf record, for example, perf record -b ... perf report and then browsing the annotate browser from perf report (press 'A'), it would fail (annotate browser can't be displayed). It's because the '.add_entry_cb' op of struct report is overwritten by hist_iter__branch_callback() in builtin-report.c. But this function doesn't do something like mapping symbols and sources. So next, do_annotate() will return directly. notes = symbol__annotation(act->ms.sym); if (!notes->src) return 0; This patch adds the lost code to hist_iter__branch_callback (refer to hist_iter__report_callback). v2: Fix a crash bug when perform 'perf report --stdio'. The reason is that we init the symbol annotation only in browser mode, it doesn't allocate/init resources for stdio mode. So now in hist_iter__branch_callback(), it will return directly if it's not in browser mode. Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1514284963-18587-1-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Jin Yao 提交于
When a valid vmlinux is not found, 'perf report' falls back to look at /proc/kcore. In this case, it will report the impossible large offset. For example: # perf record -b -e cycles:k find /etc/ > /dev/null # perf report --stdio --branch-history 22.77% _vm_normal_page+18446603336221188162 | ---page_remove_rmap +18446603336221188324 page_remove_rmap +18446603336221188487 (cycles:5) unlock_page_memcg +18446603336221188096 page_remove_rmap +18446603336221188327 (cycles:1) The issue is the value which is passed to parameter 'addr' in __get_srcline() is the objdump address. It's not correct if we calculate the offset by using 'addr - sym->start'. This patch creates a new parameter 'ip' in __get_srcline(). It is not converted to objdump address. With this patch, the perf report output is: 22.77% _vm_normal_page+66 | ---page_remove_rmap +228 page_remove_rmap +391 (cycles:5) unlock_page_memcg +0 page_remove_rmap +231 (cycles:1) page_remove_rmap +236 Committer testing: Make sure you get any valid vmlinux out of the way, using '-v' on the 'perf report' case and deleting it from places where perf searches them, like your kernel build dir and the build-id cache, in ~/.debug/. Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NJin Yao <yao.jin@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1514564812-17344-1-git-send-email-yao.jin@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Wang Nan 提交于
Fix a compile error: ... CC util/libunwind/x86_32.o In file included from util/libunwind/x86_32.c:33:0: util/libunwind/../../arch/x86/util/unwind-libunwind.c: In function 'libunwind__x86_reg_id': util/libunwind/../../arch/x86/util/unwind-libunwind.c:110:11: error: 'EINVAL' undeclared (first use in this function) return -EINVAL; ^ util/libunwind/../../arch/x86/util/unwind-libunwind.c:110:11: note: each undeclared identifier is reported only once for each function it appears in mv: cannot stat 'util/libunwind/.x86_32.o.tmp': No such file or directory make[4]: *** [util/libunwind/x86_32.o] Error 1 make[3]: *** [util] Error 2 make[2]: *** [libperf-in.o] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 It happens when libunwind-x86 feature is detected. Signed-off-by: NWang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20171206015040.114574-1-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> -
由 Arnaldo Carvalho de Melo 提交于
The 'perf test bpf' was hooking a eBPF program on the SyS_epoll_wait() kernel function, that was what the epoll_wait() glibc function ended up calling, but since at least glibc 2.26, the one that comes with, for instance, Fedora 27, glibc ends up calling SyS_epoll_pwait() when epoll_wait() is used, causing this 'perf test' entry to fail. So switch to using epoll_pwait() and hook the eBPF program to the SyS_epoll_pwait() kernel function to make it work on a wider range of glibc and kernel versions. Tested-by: NWang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-zynvquy63er8s5mrgsz65pto@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-