- 25 2月, 2009 2 次提交
-
-
由 Ron Mercer 提交于
Instead of taking/giving the semaphore repeatedly when iterating over several adderesses, we have the caller hold it until all are done. This reduces PCI bus chatter and possible waits. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Setting MAC addresses and routing frames to various queues will need to be done in response to firmware events as well as during initialization. This change encapsulates the facilities into a single call that can later me made from other places. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2009 7 次提交
-
-
由 Ron Mercer 提交于
The large receive buffer queue is not properly tracking the current index in the case where an early exit occurs. This can happen when a page alloc or dma mapping fails. If this occurs the queue will get out of sync and invalid indexes can be written to the hardware. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Receive packets were only scaling across 2 of the receive queues. The value was hardcoded to 2 instead of being based on how many rx queues were running. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Moved the buffer mapping to a point after TSO logic has modified the iph->check field. We were seeing stale data on the PCIe bus. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
We put the skb back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
We put the page back if we can't get mapping for it. We don't want unmapped buffers on our receive buffer queue. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Replace calls to vlan_hwaccel_rx() and netif_rx(). Thanks to Dave Miller for pointing out the the driver was making the wrong upcall for passing packets into the stack. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2009 3 次提交
-
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Without this the 2nd port gets first ports MAC addr. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2009 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 1月, 2009 1 次提交
-
-
由 Ben Hutchings 提交于
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a16, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2009 6 次提交
-
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
There is no need to sleep while waiting for the hardware semaphore to become available. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Support for dev id 8000 is pushed out until 2.6.30. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Putting back ql_read_sh_reg() function and using rmb() instead of volatile. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Name interrupt vectors according to the new naming standard, by Robert Olsson and DaveM. The qlge driver were very close to the new standard, thus the change is kind of trivial. Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 1月, 2009 2 次提交
-
-
由 Ron Mercer 提交于
Warnings: drivers/net/qlge/qlge_main.c:909:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:909:17: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:909:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:911:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:911:17: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:911:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:974:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:974:17: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:974:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:975:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:975:17: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:975:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2132:16: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2132:16: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:2132:16: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2133:16: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2133:16: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:2133:16: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2212:15: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2212:15: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:2212:15: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2214:15: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2214:15: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:2214:15: got restricted unsigned int [usertype] <noident> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Changed u16 to __sum16 usage. Warnings: drivers/net/qlge/qlge_main.c:1897:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1897:9: expected unsigned short [usertype] *check drivers/net/qlge/qlge_main.c:1897:9: got restricted unsigned short *<noident> drivers/net/qlge/qlge_main.c:1903:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1903:9: expected unsigned short [usertype] *check drivers/net/qlge/qlge_main.c:1903:9: got restricted unsigned short *<noident> drivers/net/qlge/qlge_main.c:1909:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1909:9: expected unsigned short [unsigned] [short] [usertype] <noident> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2009 5 次提交
-
-
由 Ron Mercer 提交于
Some indexed registers do not have error bits. In these cases a value of zero should be used for error checking. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
The length field for these rings is 16-bits. If the length is the max supported 65536 then the setting should be zero. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Shadow registers are consistent memory locations to which the chip echos ring indexes in little endian format. These values need to be endian swapped before referencing. Note: The register pointer declaration uses the volatile modifier which causes warnings in checkpatch. Per Documentation/volatile-considered-harmful.txt: - Pointers to data structures in coherent memory which might be modified by I/O devices can, sometimes, legitimately be volatile. A ring buffer used by a network adapter, where that adapter changes pointers to indicate which descriptors have been processed, is an example of this type of situation. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 12月, 2008 1 次提交
-
-
由 David S. Miller 提交于
When we removed the network device argument from several NAPI interfaces in 908a7a16 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 12月, 2008 1 次提交
-
-
由 Roel Kluin 提交于
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2008 1 次提交
-
-
由 Neil Horman 提交于
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2008 2 次提交
-
-
由 Stephen Hemminger 提交于
Fix sparse warnings and one bug: * Several routines can be static * Don't lose __iomem annotation * fix locking on error path (bug) Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert driver to new net_device_ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2008 1 次提交
-
-
由 David S. Miller 提交于
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 10月, 2008 1 次提交
-
-
由 Ron Mercer 提交于
The chip can issue spurious interrupts for single interrupt modes. We use disable to clear the condition and allow processing to continue. Also got rid of legacy specific code since it now needs to be done on MSI single irq also. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 14 10月, 2008 1 次提交
-
-
由 Kamalesh Babulal 提交于
2.6.27-git2 kernel build fails with allyesconfig on powerpc with build error <introduced by commit 01f2e4ea> CC drivers/net/enic/enic_main.o drivers/net/enic/enic_main.c: In function âenic_queue_wq_skb_tsoâ: drivers/net/enic/enic_main.c:576: error: implicit declaration of function âcsum_ipv6_magicâ make[3]: *** [drivers/net/enic/enic_main.o] Error 1 <introduced by commit c4e84bde> drivers/net/qlge/qlge_main.c: In function âql_tsoâ: drivers/net/qlge/qlge_main.c:1862: error: implicit declaration of function âcsum_ipv6_magicâ make[3]: *** [drivers/net/qlge/qlge_main.o] Error 1 <introduced by commit 95252236> drivers/net/jme.c: In function âjme_tx_tsoâ: drivers/net/jme.c:1784: error: implicit declaration of function âcsum_ipv6_magicâ make[2]: *** [drivers/net/jme.o] Error 1 Signed-off-by: NKamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2008 1 次提交
-
-
由 Huang Weiyi 提交于
Removed duplicated include <linux/init.h> in files below drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Fixes the following build warning: drivers/net/qlge/qlge_main.c:3897: warning: ‘qlge_resume’ defined but not used Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2008 1 次提交
-
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-