This patch optimises the Ethernet header comparison to use 2-byte
and 4-byte xors instead of memcmp.  In order to facilitate this,
the actual comparison is now carried out by the callers of the
shared dev_gro_receive function.

This has a significant impact when receiving 1500B packets through
10GbE.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch prepares for the move of the same_flow checks out of
dev_gro_receive.  As such we need to remember the number of held
packets since doing a loop just to count them every time is silly.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a patch from Atsushi Nemoto <anemo@mba.ocn.ne.jp>

--------------------
The commit 649274d9 ("net_dma:
acquire/release dma channels on ifup/ifdown") added unconditional call
of dmaengine_get() to net_dma.  The API should be called only if
NET_DMA was enabled.
--------------------
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NDan Williams <dan.j.williams@intel.com>

The previous fix ad0f9904 (gro:
Fix handling of imprecisely split packets) only fixed the case
of frags merging, frag_list merging in the same circumstances
were still broken.

In particular, the packet headers end up in the data stream.

This patch fixes this plus another issue where an imprecisely
split packet header may be read incorrectly (this is mostly
harmless since it'll simply cause the packet to not match and
be rejected for GRO).

Thanks to Emil Tantilov and Jeff Kirsher for helping to track
this down.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As it currently stands, skb destructors are forbidden on the
receive path because the protocol end-points will overwrite
any existing destructor with their own.

This is the reason why we have to call skb_orphan in the loopback
driver before we reinject the packet back into the stack, thus
creating a period during which loopback traffic isn't charged
to any socket.

With virtualisation, we have a similar problem in that traffic
is reinjected into the stack without being associated with any
socket entity, thus providing no natural congestion push-back
for those poor folks still stuck with UDP.

Now had we been consistent in telling them that UDP simply has
no congestion feedback, I could just fob them off.  Unfortunately,
we appear to have gone to some length in catering for this on
the standard UDP path, with skb/socket accounting so that has
created a very unhealthy dependency.

Alas habits are difficult to break out of, so we may just have
to allow skb destructors on the receive path.

It turns out that making skb destructors useable on the receive path
isn't as easy as it seems.  For instance, simply adding skb_orphan
to skb_set_owner_r isn't enough.  This is because we assume all
over the IP stack that skb->sk is an IP socket if present.

The new transparent proxy code goes one step further and assumes
that skb->sk is the receiving socket if present.

Now all of this can be dealt with by adding simple checks such
as only treating skb->sk as an IP socket if skb->sk->sk_family
matches.  However, it turns out that for bridging at least we
don't need to do all of this work.

This is of interest because most virtualisation setups use bridging
so we don't actually go through the IP stack on the host (with
the exception of our old nemesis the bridge netfilter, but that's
easily taken care of).

So this patch simply adds skb_orphan to the point just before we
enter the IP stack, but after we've gone through the bridge on the
receive path.  It also adds an skb_orphan to the one place in
netfilter that touches skb->sk/skb->destructor, that is, tproxy.

One word of caution, because of the internal code structure, anyone
wishing to deploy this must use skb_set_owner_w as opposed to
skb_set_owner_r since many functions that create a new skb from
an existing one will invoke skb_set_owner_w on the new skb.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 89a1b249edcf9be884e71f92df84d48355c576aa (gro: Avoid
copying headers of unmerged packets) only worked for packets
which are either completely linear, completely non-linear, or
packets which exactly split at the boundary between headers and
payload.

Anything else would cause bits in the header to go missing if
the packet is held by GRO.

This may have broken drivers such as ixgbe.

This patch fixes the places that assumed or only worked with
the above cases.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch optimises napi_fraginfo_skb to only copy the bits
necessary.  We also open-code the memcpy so that the alignment
information is always available to gcc.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unfortunately simplicity isn't always the best.  The fraginfo
interface turned out to be suboptimal.  The problem was quite
obvious.  For every packet, we have to copy the headers from
the frags structure into skb->head, even though for 99% of the
packets this part is immediately thrown away after the merge.

LRO didn't have this problem because it directly read the headers
from the frags structure.

This patch attempts to address this by creating an interface
that allows GRO to access the headers in the first frag without
having to copy it.  Because all drivers that use frags place the
headers in the first frag this optimisation should be enough.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently VLAN still has a bit of common code handling the aftermath
of GRO that's shared with the common path.  This patch moves them
into shared helpers to reduce code duplication.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We now only TX hash on pre-computed SKB properties.

The thinking is:

1) High performance routing and firewalling setups will
   have a multiqueue capable card used for receive, and
   therefore would have RX queue recordings made into
   the SKB which can be used for the TX side hash.

2) Locally generated packets will have an attached socket
   and thus a valid sk->sk_hash to make use of.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The idea is that drivers which implement multiqueue RX
pre-seed the SKB by recording the RX queue selected by
the hardware.

If such a seed is found on TX, we'll use that to select
the outgoing TX queue.

This helps get more consistent load balancing on router
and firewall loads.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a frag is shorter than an Ethernet header, we'd return a
zeroed packet instead of aborting.  This patch fixes that.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I'm trying to track down why people're hitting the checksum warning
in skb_gso_segment.  As the problem seems to be hitting lots of
people and I can't reproduce it or locate the bug, here is a patch
to print out more details which hopefully should help us to track
this down.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds an init_dummy_netdev() function that gets a network device
structure (allocation and lifetime entirely under caller's control) and
initialize the minimum amount of fields so it can be used to schedule
NAPI polls without registering a full blown interface. This is to be
used by drivers that need to tie several hardware interfaces to a single
NAPI poll scheduler due to HW limitations.

It also updates the ibm_newemac driver to use that, this fixing the
oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add()

Symbol is exported GPL only a I don't think we want binary drivers doing
that sort of acrobatics (if we want them at all).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an skb with page frags is merged into an existing one, we
cannibalise its reference count.  This is OK when the skb is
reused because we set nr_frags to zero in that case.  However,
for the case where the skb is freed through kfree_skb, we didn't
clear nr_frags which causes the page to be freed prematurely.

This is fixed by moving the skb resetting into skb_gro_receive.
Reported-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As GRO cannot be applied to packets with frag_list we need to
make sure that we reject such packets if they are fed to us,
e.g., through a tunnel device.

Also there is no point in applying GRO on GSO packets so they
too should be rejected.  This allows GRO to be used in virtio-net
which may produce GSO packets directly but may still benefit
from GRO if the other end of it doesn't support GSO.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent dmaengine rework removed the capability to remove dma device
driver modules while net_dma is active.  Rather than notify
dmaengine-clients that channels are trying to be removed, we now rely on
clients to notify dmaengine when they no longer have a need for
channels.  Teach net_dma to release channels by taking dmaengine
references at netdevice open and dropping references at netdevice close.
Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously GRO's only entry point from the outside is through
napi_gro_receive and napi_gro_frags.  These interfaces are for
device drivers.

This patch rearranges things to provide a new set of interfaces
for VLANs.  These interfaces are for internal use only.  The
VLAN code itself can then provide a set of entry points for
device drivers.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All users have been converted to either the general-purpose allocator,
dma_find_channel, or dma_request_channel.
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Now that clients no longer need to be notified of channel arrival
dma_async_client_register can simply increment the dmaengine_ref_count.
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Use the general-purpose channel allocation provided by dmaengine.
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

async_tx and net_dma each have open-coded versions of issue_pending_all,
so provide a common routine in dmaengine.

The implementation needs to walk the global device list, so implement
rcu to allow dma_issue_pending_all to run lockless.  Clients protect
themselves from channel removal events by holding a dmaengine reference.
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This patch allows GRO to merge page frags (skb_shinfo(skb)->frags)
in one skb, rather than using the less efficient frag_list.

It also adds a new interface, napi_gro_frags to allow drivers
to inject page frags directly into the stack without allocating
an skb.  This is intended to be the GRO equivalent for LRO's
lro_receive_frags interface.

The existing GSO interface can already handle page frags with
or without an appended frag_list so nothing needs to be changed
there.

The merging itself is rather simple.  We store any new frag entries
after the last existing entry, without checking whether the first
new entry can be merged with the last existing entry.  Making this
check would actually be easy but since no existing driver can
produce contiguous frags anyway it would just be mental masturbation.

If the total number of entries would exceed the capacity of a
single skb, we simply resort to using frag_list as we do now.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to allow GRO packets without frag_list at all, we need to
store the MSS in the packet itself.  The obvious place is gso_size.
The only thing to watch out for is if the packet ends up not being
GRO then we need to clear gso_size before pushing the packet into
the stack.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During network namespace teardown we either move or delete
all of the network devices associated with a network namespace.
In the case of veth devices deleting one will also delete it's
pair device.  If both devices are in the same network namespace
then for_each_netdev_safe is insufficient as next may point
to the second veth device we have deleted.

To avoid problems I do what we do in __rtnl_kill_links and
restart the scan of the device list, after we have deleted
a device.

Currently dev_change_netnamespace does not appear to suffer from
this problem, but wireless devices are also paired and likely
should be moved between network namespaces together.  So I have
errored on the side of caution and restart the scan of the network
devices in that case as well.
Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The initial skb may have been freed after napi_gro_complete in
napi_gro_receive if it was merged into an existing packet.  Thus
we cannot check same_flow (which indicates whether it was merged)
after calling napi_gro_complete.

This patch fixes this by saving the same_flow status before the
call to napi_gro_complete.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent GRO patches introduced the NAPI removal of devices in
free_netdev.  For drivers that can change the number of queues during
driver operation, the NAPI infrastructure doesn't allow the freeing and
re-addition of NAPI entities without reloading the driver.

This change reinitializes the dev_list in each NAPI struct on delete,
instead of just deleting it (and assigning the list pointers to POISON).
Drivers that wish to remove/re-add NAPI will need to re-initialize the
netdev napi_list after removing all NAPI instances, before re-adding NAPI
devices again.
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A command like this: "brctl addif br1 eth1" issued as a user gave me
an oops when bridge module wasn't loaded. It's caused by using a dev
pointer before checking for NULL.
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A separate xmit lock class supports GPRS over a Phonet pipe over a TUN
device (type ARPHRD_NONE).
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also leave some room for more 802.11 types.
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the top-level GRO (Generic Receive Offload) infrastructure.
This is pretty similar to LRO except that this is protocol-independent.
Instead of holding packets in an lro_mgr structure, they're now held in
napi_struct.

For drivers that intend to use this, they can set the NETIF_F_GRO bit and
call napi_gro_receive instead of netif_receive_skb or just call netif_rx.
The latter will call napi_receive_skb automatically.  When napi_gro_receive
is used, the driver must either call napi_complete/napi_rx_complete, or
call napi_gro_flush in softirq context if the driver uses the primitives
__napi_complete/__napi_rx_complete.

Protocols will set the gro_receive and gro_complete function pointers in
order to participate in this scheme.

In addition to the packet, gro_receive will get a list of currently held
packets.  Each packet in the list has a same_flow field which is non-zero
if it is a potential match for the new packet.  For each packet that may
match, they also have a flush field which is non-zero if the held packet
must not be merged with the new packet.

Once gro_receive has determined that the new skb matches a held packet,
the held packet may be processed immediately if the new skb cannot be
merged with it.  In this case gro_receive should return the pointer to
the existing skb in gro_list.  Otherwise the new skb should be merged into
the existing packet and NULL should be returned, unless the new skb makes
it impossible for any further merges to be made (e.g., FIN packet) where
the merged skb should be returned.

Whenever the skb is merged into an existing entry, the gro_receive
function should set NAPI_GRO_CB(skb)->same_flow.  Note that if an skb
merely matches an existing entry but can't be merged with it, then
this shouldn't be set.

If gro_receive finds it pointless to hold the new skb for future merging,
it should set NAPI_GRO_CB(skb)->flush.

Held packets will be flushed by napi_gro_flush which is called by
napi_complete and napi_rx_complete.

Currently held packets are stored in a singly liked list just like LRO.
The list is limited to a maximum of 8 entries.  In future, this may be
expanded to use a hash table to allow more flows to be held for merging.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows GSO to handle frag_list in a limited way for the
purposes of allowing packets merged by GRO to be refragmented on
output.

Most hardware won't (and aren't expected to) support handling GRO
frag_list packets directly.  Therefore we will perform GSO in
software for those cases.

However, for drivers that can support it (such as virtual NICs) we
may not have to segment the packets at all.

Whether the added overhead of GRO/GSO is worthwhile for bridges
and routers when weighed against the benefit of potentially
increasing the MTU within the host is still an open question.
However, for the case of host nodes this is undoubtedly a win.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is the last shoot of this series.
After I removing all directly reference of netdev->priv, I am killing
"priv" of "struct net_device" and fixing relative comments/docs.

Anyone will not be allowed to reference netdev->priv directly.
If you want to reference the memory of private data, use netdev_priv()
instead.
If the private data is not allocted when alloc_netdev(), use
netdev->ml_priv to point that memory after you creating that private
data.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order for the network device ops get_stats call to be immutable, the handling
of the default internal network device stats block has to be changed. Add a new
helper function which replaces the old use of internal_get_stats.

Note: change return code to make it clear that the caller should not
go changing the returned statistics.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the network device internal API to move adminstrative
operations out of the network device structure and into a separate structure.

This patch involves some hackery to maintain compatablity between the
new and old model, so all 300+ drivers don't have to be changed at once.
For drivers that aren't converted yet, the netdevice_ops virt function list
still resides in the net_device structure. For old protocols, the new
net_device_ops are copied out to the old net_device pointers.

After the transistion is completed the nag message can be changed to
an WARN_ON, and the compatiablity code can be made configurable.

Some function pointers aren't moved:
* destructor can't be in net_device_ops because
  it may need to be referenced after the module is unloaded.
* neighbor setup is manipulated in a couple of places that need special
  consideration
* hard_start_xmit is in the fast path for transmit.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Technically, patch changes format for modules, but I think nobody cares.

	-86dd          :ipv6:ipv6_rcv+0x0
	+86dd          ipv6_rcv+0x0/0x400 [ipv6]
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NJames Morris <jmorris@namei.org>

I was recently hunting a bug that occurred in network namespace
cleanup.  In looking at the code it became apparrent that we have
and will continue to have cases where if we have anything going
on in a network namespace there will be assumptions that the
loopback device is present.   Things like sending igmp unsubscribe
messages when we bring down network devices invokes the routing
code which assumes that at least the loopback driver is present.

Therefore to avoid magic initcall ordering hackery that is hard
to follow and hard to get right insert a call to register the
loopback device directly from net_dev_init().    This guarantes
that the loopback device is the first device registered and
the last network device to go away.

But do it carefully so we register the loopback device after
we clear dev_boot_phase.
Signed-off-by: NEric W. Biederman <ebiederm@maxwell.aristanetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>