- 26 11月, 2014 20 次提交
-
-
由 Peter Hung 提交于
The original driver fixed the io address with 0xe000+idx*8, but real io address assigned from BIOS is dynamically from read PCI configure space 0x24, 0x20, 0x1c. The Fintek F81504/F81508/F81512 maybe malfunction without this patch and malfunction surely when more then 1 PCI card. Signed-off-by: NPeter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Janusz Uzycki 提交于
tx_empty() should test whether both the transmitter fifo and shifter for the port is empty, ie. the whole last char was transmitted. The shift register is empty if AUART_STAT_BUSY is cleared. The patch fixes the function against the shift register. According to i.MX23 and i.MX28 Reference Manual: AUART_STAT_TXFE: TX FIFO or transmit holding register is empty. AUART_STAT_BUSY: AUART still transmits bits. The BUSY signal goes HIGH as soon as the data is written to the transmit FIFO (that is, the FIFO is non-empty) and remains asserted HIGH while data is being transmitted. BUSY is negated only when the transmit FIFO is empty, and the last character has been transmitted from the shift register, including the stop bits. Signed-off-by: NJanusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Janusz Uzycki 提交于
mxs_auart_modem_status() did't detect gpio's state change because s->mctrl_prev was modified before by mctrl_gpio_get(). The patch introduces mctrl_temp variable to fix the bug. Signed-off-by: NJanusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabio Estevam 提交于
Commit 732a84a0 ("serial: core: Pass termios to set_ldisc() notifications") changed the set_ldisc prototype. At the time of this commit the mxs_auart driver did not implement set_ldisc, so that's why it has not been converted. Adapt also mxs_auart_set_ldisc() so that the following build warning can be fixed: drivers/tty/serial/mxs-auart.c:962:2: warning: initialization from incompatible pointer type .set_ldisc = mxs_auart_set_ldisc, ^ drivers/tty/serial/mxs-auart.c:962:2: warning: (near initialization for 'mxs_auart_ops.set_ldisc') Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Tested-by: NJanusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 David Daney 提交于
Although the existing code appears to work on most hardware, the hardware designers tell us that 8-bit access to the registers is not guaranteed to be reliable. Also the OCTEON simulation environments prohibit 8-bit accesses. For these reasons, we use __raw_readq/__raw_writeq for OCTEON. This code is protected with #ifdef CONFIG_64BIT so it still builds under configurations lacking readq/writeq. We can get rid of the #ifdef __BIG_ENDIAN, as under 64-bit accesses, OCTEON is byte order invariant. Signed-off-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@auriga.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabio Estevam 提交于
When CONFIG_SERIAL_IMX_CONSOLE=n and CONFIG_CONSOLE_POLL=y we get the following build warning: drivers/tty/serial/imx.c:306:13: warning: 'imx_port_ucrs_save' defined but not used [-Wunused-function] drivers/tty/serial/imx.c:315:13: warning: 'imx_port_ucrs_restore' defined but not used [-Wunused-function] imx_port_ucrs_save/restore are only used under CONFIG_SERIAL_IMX_CONSOLE, so their definitions should be also be protected only by CONFIG_SERIAL_IMX_CONSOLE. This was detected when building 'allmodconfig'. Reported-by: NOlof's autobuilder <build@lixom.net> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jiri Slaby 提交于
struct bfin_serial_port contains structs circ_buf, timer_list, and work_struct directly (not pointers). This means that these structures have to be defined completely to be inlined in struct bfin_serial_port. So instead of struct declarations, define the structures by including proper headers. They were pulled in by linux/serial_core.h or others until now. But experimenting with circ_buf removal from serial_core, struct circ_buf becomes undefined in bfin_serial: In file included from arch/blackfin/kernel/debug-mmrs.c:21:0: arch/blackfin/include/asm/bfin_serial.h:44:18: error: field 'rx_dma_buf' has incomplete type Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter reported: |drivers/tty/serial/8250/8250_omap.c:1025 omap8250_probe() |warn: unsigned 'up.port.line' is never less than zero. |1025 if (up.port.line < 0) { Since of_alias_get_id() and pdev->id can get negative I check for the error via ret variable. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter reported: |drivers/tty/serial/8250/8250_omap.c:1025 omap8250_probe() |warn: unsigned 'up.port.line' is never less than zero. |1025 if (up.port.line < 0) { I (wrongly) assumed that line is an int and compiler didn't complain nor did sparse. Since of_alias_get_id() and pdev->id can get negative I check for the error via ret variable. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Axel Lin 提交于
The mcb_device_id table is supposed to be zero-terminated. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Qipan Li 提交于
in CSR A7DA SoC, uart6 located at BT module and it need multiple clock sources, so for "sirf,marco-bt-uart" compatible uarts, drivers take 3 clock sources and enable them. this patch also replaces clk_get by devm_clk_get function and fix DT binding document in which we missed to fix when we added marco platform in commit 909102db "serial: sirf: add support for Marco chip". Signed-off-by: NQipan Li <Qipan.Li@csr.com> Signed-off-by: NBarry Song <Baohua.Song@csr.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Perches 提交于
Convert the pr_warning to the more common pr_warn. Other miscellanea: o Convert unusual PR_FMT define and uses to pr_fmt o Remove unnecessary OOM message o Fix grammar in an error message o Convert a pr_warning with a KERN_ERR to pr_err Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Zapalowicz 提交于
This commit deals with the checkpatch warning "Unnecessary space before function pointer arguments". Signed-off-by: NKonrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Zapalowicz 提交于
The changed function flushes the tx UART and the '4' corresponds to the UART_FCR_CLEAR_XMIT value. This commit replaces the magic number with this define. Signed-off-by: NKonrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Zapalowicz 提交于
This commit fixes the alignment of the 'case's i the switch statement. Signed-off-by: NKonrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Zapalowicz 提交于
The flow of {neo,cls}_param() shows that at this stage the baud rate has a non-zero value. This fact makes the if clausule obsolete and acknowledges it's removal. Signed-off-by: NKonrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Zapalowicz 提交于
The 'force' parameter to the {cls,neo}_send_break() function has been removed because it has not been used. The client to this API (the tty code) always called this function with only one value. Signed-off-by: NKonrad Zapalowicz <bergo.torino@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nobuhiro Iwamatsu 提交于
This changes negative values of error rate to be checked, because these values are valid as error rate. And this changes in the process of adopting a value close to 0. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
Simply document the new compat string (and keep the list sorted by SoC). There appears to be no need for a driver update. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ulrich Hecht 提交于
Simply document the new compat string. There appears to be no need for a driver update. Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> [geert: Reworded to match previous commits] Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 11月, 2014 2 次提交
-
-
由 Frank Rowand 提交于
Update devicetree binding for msm_serial to reflect msm_serial_probe() getting line id (port number) from the serialN alias. Signed-off-by: NFrank Rowand <frank.rowand@sonymobile.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Stephen Boyd 提交于
If there isn't a DT alias then of_alias_get_id() will return -ENODEV. This will cause the msm_serial driver to fail probe, when we want to keep the previous behavior where we generated a dynamic line number at probe time. Restore this behavior by generating a dynamic id if the line number is still negative after checking for an alias or in the non-DT case looking at the .id field of the platform device. Reported-by: NKevin Hilman <khilman@kernel.org> Tested-by: NKevin Hilman <khilman@linaro.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 22 11月, 2014 1 次提交
-
-
由 Peter Hurley 提交于
Commit 68952076 ("vt: Remove vt_get_kmsg_redirect() from uapi header") fails to compile if !CONFIG_VT_CONSOLE. Move macro definition for vt_get_kmsg_redirect() up with file-scope function declarations. Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 11月, 2014 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit 1bd83245. To quote Olof: This commit broke a whole lot of tegra boards in last night's -next here. In particular, I've been looking at tegra20-seaboard, which now doesn't boot with console any more. Breaking existing systems is bad. Reported-by: NOlof Johansson <olof@lixom.net> Cc: Lucas Stach <dev@lynxeye.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 11月, 2014 10 次提交
-
-
由 Greg Kroah-Hartman 提交于
This resolves a merge issue with drivers/tty/serial/8250/8250_mtk.c Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - enable bpf syscall for compat - cpu_suspend fix when checking the idle state type - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: update defconfig for 3.18 arm64: compat: Enable bpf syscall arm64: psci: fix cpu_suspend to check idle state type for index
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Another quiet week: - a fix to silence edma probe error on non-supported platforms from Arnd - a fix to enable the PL clock for Parallella, to make mainline usable with the SDK. - a somewhat verbose fix for the PLL clock tree on VF610 - enabling of SD/MMC on one of the VF610-based boards (for testing) - a fix for i.MX where CONFIG_SPI used to be implicitly enabled and now needs to be added to the defconfig instead - another maintainer added for bcm2835: Lee Jones" * tag 'armsoc-for-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: zynq: Enable PL clocks for Parallella dma: edma: move device registration to platform code ARM: dts: vf610: add SD node to cosmic dts MAINTAINERS: update bcm2835 entry ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux由 Linus Torvalds 提交于
Pull devicetree bugfix from Grant Likely: "One buffer overflow bug that shouldn't be left around" * 'devicetree/merge' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of: Fix overflow bug in string property parsing functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fix from Chris Mason: "It's a one liner for an error cleanup path that leads to crashes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 tiny fixes for 3.18-rc4. One fixes up a long-stading race condition in the driver core for removing directories in /sys/devices/virtual/ and the other 2 fix up the wording of a new Kconfig option that was added in 3.18-rc1" * tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP sysfs: driver core: Fix glue dir race condition by gdp_mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some staging/iio fixes for 3.18-rc4. Nothing major, just a few bugfixes of things that have been reported" * tag 'staging-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging:iio:ade7758: Remove "raw" from channel name staging:iio:ade7758: Fix check if channels are enabled in prenable staging:iio:ade7758: Fix NULL pointer deref when enabling buffer iio: as3935: allocate correct iio_device size io: accel: kxcjk-1013: Fix iio_event_spec direction iio: tsl4531: Fix compiler error when CONFIG_PM_OPS is not defined iio: adc: mxs-lradc: Disable the clock on probe failure iio: st_sensors: Fix buffer copy staging:iio:ad5933: Drop "raw" from channel names staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial fixes from Greg KH: "Here are some tiny serial/tty fixes for 3.18-rc4 that resolve some reported issues" * tag 'tty-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix pty master poll() after slave closes v2 serial: of-serial: fix uninitialized kmalloc variable tty/vt: don't set font mappings on vc not supporting this tty: serial: 8250_mtk: Fix quot calculation tty: Prevent "read/write wait queue active!" log flooding tty: Fix high cpu load if tty is unreleaseable serial: Fix divide-by-zero fault in uart_get_divisor()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes for 3.18-rc4. Just a bunch of little fixes resolving reported issues and new device ids for existing drivers. Full details are in the shortlog" * tag 'usb-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: Update default usb-storage delay_use value in kernel-parameters.txt USB: cdc-acm: add quirk for control-line state requests phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly USB: storage: Fix timeout in usb_stor_euscsi_init() and usb_stor_huawei_e220_init() USB: cdc-acm: only raise DTR on transitions from B0 Revert "storage: Replace magic number with define in usb_stor_euscsi_init()" usb: core: notify disconnection when core detects disconnect usb: core: need to call usb_phy_notify_connect after device setup uas: Add US_FL_NO_ATA_1X quirk for 2 more Seagate models xhci: no switching back on non-ULT Haswell USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen USB: quirks: enable device-qualifier quirk for another Elan touchscreen MAINTAINERS: Remove duplicate entry for usbip driver usb: storage: fix build warnings !CONFIG_PM usb: Remove references to non-existent PLAT_S5P symbol uas: Add NO_ATA_1X for VIA VL711 devices xhci: Disable streams on Asmedia 1042 xhci controllers USB: HWA: fix a warning message uas: Add US_FL_NO_ATA_1X quirk for 1 more Seagate model usb-storage: handle a skipped data phase ...
-
- 09 11月, 2014 4 次提交
-
-
由 Andreas Färber 提交于
The Parallella board comes with a U-Boot bootloader that loads one of two predefined FPGA bitstreams before booting the kernel. Both define an AXI interface to the on-board Epiphany processor. Enable clocks FCLK0..FCLK3 for the Programmable Logic by default. Otherwise accessing, e.g., the ESYSRESET register freezes the board, as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem. Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c bugfixes from Wolfram Sang: "One bigger cleanup (FSF address removal) and two bugfixes for I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "Two fixlets for the armada SoC interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: armada-370-xp: Fix MPIC interrupt handling irqchip: armada-370-xp: Fix MSI interrupt handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "For: - some regression fixes at the Remote Controller core and imon driver - a build fix for certain randconfigs with ir-hix5hd2 - don't feed power to satellite system at ds3000 driver init It also contains some fixes for drivers added for Kernel 3.18: - some fixes at the new ISDB-S driver, and the corresponding bits to fix some descriptors for this Japanese TV standard at the DVB core - two warning cleanups for sp2 driver if PM is disabled - change the default mode for the new vivid driver" * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] sp2: sp2_init() can be static [media] dvb:tc90522: fix always-false expression [media] dvb-core: set default properties of ISDB-S [media] dvb:tc90522: fix stats report [media] vivid: default to single planar device instances [media] imon: fix other RC type protocol support [media] ir-hix5hd2 fix build warning [media] ds3000: fix LNB supply voltage on Tevii S480 on initialization [media] rc5-decoder: BZ#85721: Fix RC5-SZ decoding [media] rc-core: fix protocol_change regression in ir_raw_event_register
-
- 08 11月, 2014 2 次提交
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS updates from Ralf Baechle: "This weeks' round of MIPS bug fixes for 3.18: - wire up the bpf syscall - fix TLB dump output for R3000 class TLBs - fix strnlen_user return value if no NUL character was found. - fix build with binutils 2.24.51+. While there is no binutils 2.25 release yet, toolchains derived from binutils 2.24.51+ are already in common use. - the Octeon GPIO code forgot to offline GPIO IRQs. - fix build error for XLP. - fix possible BUG assertion with EVA for CMA" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix build with binutils 2.24.51+ MIPS: R3000: Fix debug output for Virtual page number MIPS: Fix strnlen_user() return value in case of overlong strings. MIPS: CMA: Do not reserve memory if not required MIPS: Wire up bpf syscall. MIPS/Xlp: Remove the dead function destroy_irq() to fix build error MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "This update fixes a warning in the new pagecache_isize_extended() and updates some related comments, another fix for zero-range misbehaviour, and an unforntuately large set of fixes for regressions in the bulkstat code. The bulkstat fixes are large but necessary. I wouldn't normally push such a rework for a -rcX update, but right now xfsdump can silently create incomplete dumps on 3.17 and it's possible that even xfsrestore won't notice that the dumps were incomplete. Hence we need to get this update into 3.17-stable kernels ASAP. In more detail, the refactoring work I committed in 3.17 has exposed a major hole in our QA coverage. With both xfsdump (the major user of bulkstat) and xfsrestore silently ignoring missing files in the dump/restore process, incomplete dumps were going unnoticed if they were being triggered. Many of the dump/restore filesets were so small that they didn't evenhave a chance of triggering the loop iteration bugs we introduced in 3.17, so we didn't exercise the code sufficiently, either. We have already taken steps to improve QA coverage in xfstests to avoid this happening again, and I've done a lot of manual verification of dump/restore on very large data sets (tens of millions of inodes) of the past week to verify this patch set results in bulkstat behaving the same way as it does on 3.16. Unfortunately, the fixes are not exactly simple - in tracking down the problem historic API warts were discovered (e.g xfsdump has been working around a 20 year old bug in the bulkstat API for the past 10 years) and so that complicated the process of diagnosing and fixing the problems. i.e. we had to fix bugs in the code as well as discover and re-introduce the userspace visible API bugs that we unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly. Summary: - incorrect warnings about i_mutex locking in pagecache_isize_extended() and updates comments to match expected locking - another zero-range bug fix for stray file size updates - a bunch of fixes for regression in the bulkstat code introduced in 3.17" * tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() xfs: rework zero range to prevent invalid i_size updates mm: Remove false WARN_ON from pagecache_isize_extended() xfs: Check error during inode btree iteration in xfs_bulkstat() xfs: bulkstat doesn't release AGI buffer on error
-