No i2c client uses the I2C_CLIENT_ALLOW_MULTIPLE_USE flag, drop it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we
can simply make it the default and drop the flag. If any driver really
doesn't want to be notified when i2c adapters are added, that driver
can simply omit to set .attach_adapter. This approach is also more
robust as it prevents accidental NULL pointer dereferences.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The I2C_DF_DUMMY flag is gone since 2.5.70, it's about time to
drop all ifdef'd out references thereto.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Port the vt8231 hardware monitoring driver from lm_sensors CVS to
Linux 2.6.
Signed-off-by: NRoger Lucas <roger@planbit.co.uk>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following patch adds support for the Barco LPT->DVI I2C adapter to
the i2c-parport driver.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove duplicate of BCD macros.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the VID reading; no cpu0_vid and vrm files created if
the chip is w83627thf and GPIO5 not enabled.
Signed-off-by: NYuan Mu <ymu@winbond.com.tw>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Support the VRM 10 mode of the ADT7463.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers, hwmon, adm1025 and adm1026: remove deprecated sysfs names.

these names have been listed for removal for six months, time for them to go
Signed-off-by: NGrant Coady <gcoady@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add code to handle case where board firmware does not start the
RTC.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
CC: James Chapman <jchapman@katalix.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch tweaks i2c-i801.c so that the driver always sets the SMBAUXCTL
register (which enables/disables PEC) explicitly before each transaction.
Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus
and a different revision of the Socket CF+ Bluetooth card.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

kill the socket_shutdown()/shutdown_socket() confusion by making it
one single function. move cs_socket_put() in there. nicer to read and
smaller:

original:
   text	   data	    bss	    dec	    hex	filename
  25181	   1076	     32	  26289	   66b1	drivers/pcmcia/pcmcia_core.ko

patched:
   text	   data	    bss	    dec	    hex	filename
  24973	   1076	     32	  26081	   65e1	drivers/pcmcia/pcmcia_core.ko
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Convert users of kmalloc and memset to kzalloc
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Do not wildly probe the IO ports we're trying to use on PARISC.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Export the stored values instead of re-reading everything in the socket
information sysfs files, and make them accessible to all users, not only
to root.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This adds PCMCIA support for both MPC885ADS and MPC866ADS.

This is established not together with FADS, because 885 does not have
io_block_mapping() for BCSR area.
Also, some cleanups done both for 885ADS and MBX.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This fixes misconfiguration that could result in odd work of some old CF
cards.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Some PCMCIA sockets have statically mapped memory windows, but dynamically
mapped IO windows. Using the "nonstatic" socket library is inpractical for
them, as they do neither need a resource database (as we can trust the
kernel resource database on m68k and ppc) nor lots of other features of that
library. Let them get a small "iodyn" socket library (105 lines of code)
instead.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified
probe() callback. As all in-kernel drivers are changed to this new
callback, there will be no temporary backwards-compatibility. Inside a
probe() function, each driver _must_ set struct pcmcia_device
*p_dev->instance and instance->handle correctly.

With these patches, the basic driver interface for 16-bit PCMCIA drivers
now has the classic four callbacks known also from other buses:

        int (*probe)            (struct pcmcia_device *dev);
        void (*remove)          (struct pcmcia_device *dev);

        int (*suspend)          (struct pcmcia_device *dev);
        int (*resume)           (struct pcmcia_device *dev);
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The linked list of devices managed by each PCMCIA driver is, in very most
cases, unused. Therefore, remove it from many drivers.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Remove the old "detach" mechanism as it is unused now.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function.
Old functionality is preserved, for the moment.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Merge the suspend and resume methods for 16-bit PCMCIA cards into the
device model -- for both runtime power management and suspend to ram/disk.

Bugfix in ds.c by Richard Purdie
Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Move the suspend and resume methods out of the event handler, and into
special functions. Also use these functions for pre- and post-reset, as
almost all drivers already do, and the remaining ones can easily be
converted.

Bugfix to include/pcmcia/ds.c
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Make the bridge specific initialization code config options depending on
CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are
available. Disabling all of the specific tweaks cuts off more than half
of yenta_socket.ko.
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Also return a value if CONFIG_PCMCIA_PROBE is not set.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Add a return value to pcmcia_validate_mem.  Only if we have enough memory
available to map the CIS, we should proceed in trying to determine information
about the device.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The .get_socket callback is never used by the PCMCIA core, therefore remove
it.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Don't waste cpu time in yenta interrupt handler when the interrupt was for
another device.
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Fix macro abuse in pcmcia.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

	I have recently been switching from using 2.4.32 on my trusty
old Sparc Blade 100 to using 2.6.15 .  Some of the problems I ran into
were distorted video when the console was active (missing first
character, skipped dots) and when running X windows (colored snow,
stripes, missing pixels).  A quick examination of the 2.6 versus 2.4
source for the ATY driver revealed alot of changes.

         A closer look at the code/data for the 64GR/XL chip revealed
two minor "typos" that the rewriter(s) of the code made.  The first is
a incorrect clock value (230 .vs. 235) and the second is a missing
flag (M64F_SDRAM_MAGIC_PLL).  Making both these changes seems to have
fixed my problem.  I tend to think the 235 value is the correct one,
as there is a 29.4 Mhz clock crystal close to the video chip and 235.2
(29.4*8) is too close to 235 to make it a coincidence.

	The flag for M64F_SDRAM_MAGIC_PLL was dropped during the
changes made by adaplas in file revision 1.72 on the old bitkeeper
repository.

	The change relating to the clock rate has been there forever,
at least in the 2.6 tree.  I'm not sure where to look for the old 2.5
tree or if anyone cares when it happened.

On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the
clock crystal frequency is 235.2 Mhz, not 230 Mhz.  The chipset also
requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL
properly for the DRAM.
Signed-off-by: NLuis F. Ortiz <lfo@Polyad.Org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IXP4xx driver bails out on all A0 CPUs, but it should only do
so on IXP42x as IXP46x has functioning HW.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch #if 0's an unused global function.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Thanks to drivers making their id tables __devinit, we can't allow
userspace to bind or unbind drivers from devices manually through sysfs.
So we only allow this if CONFIG_HOTPLUG is enabled.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver core: rearrange exports in platform.c

The new way is to specify export right after symbol definition.
Rearrange exports to follow new style to avoid mixing two styles
in one file.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Driver core: add platform_device_del function

Having platform_device_del90 allows more straightforward error
handling code in drivers registering platform devices.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here's the patch for modalias support for input classes.  It uses
comma-separated numbers, and doesn't describe all the potential keys (no
module currently cares, and that would make the strings huge).  The
changes to input.h are to move the definitions needed by file2alias
outside __KERNEL__.  I chose not to move those definitions to
mod_devicetable.h, because there are so many that it might break compile
of something else in the kernel.

The rest is fairly straightforward.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
CC: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ...

Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and
ide-tape, to autoload these modules depending on the probed media type of
the IDE device.

It is used by udev and replaces the former agent shell script of the hotplug
package, which was required to lookup the media type in the proc filesystem.
Using proc was racy, cause the media file is created after the hotplug event
is sent out.

The module autoloading does not take any effect, until something like the
following udev rule is configured:
  SUBSYSTEM=="ide",  ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}"

The module ide-scsi will not be autoloaded, cause it requires manual
configuration. It can't be, and never was supported for automatic setup in
the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported
media types, would just lead to a default blacklist entry anyway.

  $ modinfo ide-disk
  filename:       /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko
  description:    ATA DISK Driver
  alias:          ide:*m-disk*
  license:        GPL
  ...

  $ modprobe -vn ide:m-disk
  insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko

  $ cat /sys/bus/ide/devices/0.0/modalias
  ide:m-disk

It also adds attributes to the IDE device:
  $ tree /sys/bus/ide/devices/0.0/
  /sys/bus/ide/devices/0.0/
  |-- bus -> ../../../../../../../bus/ide
  |-- drivename
  |-- media
  |-- modalias
  |-- power
  |   |-- state
  |   `-- wakeup
  `-- uevent

  $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media}
  ide:m-disk
  hda
  disk
Signed-off-by: NKay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>