pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.

Link: https://lore.kernel.org/r/20200707055000.9453-1-dinghao.liu@zju.edu.cnSigned-off-by: NDinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit
the fixup to only affect the relevant PCIe bridges.

Fixes: 322f0343 ("PCI: qcom: Use default config space read function")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v5.2+

The SDM845 has one Gen2 and one Gen3 controller, add support for these.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAndrew Murray <andrew.murray@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Currently, there is only a 1 ms sleep after asserting PERST.

Reading the datasheets for different endpoints, some require PERST to be
asserted for 10 ms in order for the endpoint to perform a reset, others
require it to be asserted for 50 ms.

Several SoCs using this driver uses PCIe Mini Card, where we don't know
what endpoint will be plugged in.

The PCI Express Card Electromechanical Specification r2.0, section
2.2, "PERST# Signal" specifies:

"On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
the power rails achieving specified operating limits."

Add a sleep of 100 ms before deasserting PERST, in order to ensure that
we are compliant with the spec.

Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5+

The QCS404 platform contains a PCIe version 2.4.0 controller and a
Qualcomm PCIe2 PHY. The driver already supports version 2.4.0, for the
IPQ4019, but this support touches clocks and resets related to the PHY
as well and there's no upstream driver for the PHY.

On QCS404 we must initialize the PHY, so a separate PHY driver is
implemented to take care of this and the controller driver is updated to
not require the PHY related resources. This is done by relying on the
fact that operations in both the clock and reset framework are NOPs when
passed NULL, so we can isolate this change to only the
qcom_pcie_get_resources_2_4_0() function.

For QCS404 we also need to enable the AHB (iface) clock, in order to
access the register space of the controller, but as this is not part of
the IPQ4019 DT binding this is only added for new users of the 2.4.0
controller.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Before introducing the QCS404 platform, which uses the same PCIe
controller as IPQ4019, migrate this to use the bulk clock API, in order
to make the error paths slighly cleaner.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Move the device class fudge to a proper fixup function, and remove
qcom_pcie_rd_own_conf() which has become useless.

dw_pcie_setup_rc() already did the right thing, but it's broken
on older qcom chips, such as 8064.
Signed-off-by: NMarc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Acquiring the reset GPIO low means that reset is being deasserted, this
is followed almost immediately with qcom_pcie_host_init() asserting it,
initializing it and then finally deasserting it again, for the link to
come up.

Some PCIe devices requires a minimum time between the initial deassert
and subsequent reset cycles. In a platform that boots with the reset
GPIO asserted this requirement is being violated by this deassert/assert
pulse.

Acquire the reset GPIO high to prevent this situation by matching the
state to the subsequent asserted state.

Fixes: 82a82383 ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org

The driver does not cope with the fact that probe can fail in a number
of cases after enabling runtime PM on the device; this results in
warnings about "Unbalanced pm_runtime_enable". Furthermore if probe
fails after invoking qcom_pcie_host_init() the power-domain will be left
referenced.

As it is not possible for the error handling in qcom_pcie_host_init() to
handle errors happening after returning from that function the
pm_runtime_get_sync() is moved to qcom_pcie_probe() as well.

Fixes: 854b69ef ("PCI: qcom: add runtime pm support to pcie_port")
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Function dw_pcie_host_init() already initializes the root_bus_nr field
of 'struct pcie_port', so the -1 assignment prior to calling
dw_pcie_host_init() in platform specific driver is not really needed.
Drop it.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.comSigned-off-by: NShawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

When CONFIG_GPIOLIB is disabled, we run into a build failure:

  drivers/pci/dwc/pcie-qcom.c: In function 'qcom_pcie_probe':
  drivers/pci/dwc/pcie-qcom.c:1223:16: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
    pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);

Including gpio/consumer.h directly is the correct fix.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This patch is required when the pcie controller sits on a bus with
its own power domain and clocks which are controlled via a bus driver
like simple pm bus. As these bus driver have runtime pm enabled, it makes
sense to update the usage counter so that the runtime pm does not suspend
the clks or power domain associated with the bus driver.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Fix a typo that accidentally sets "val" to zero when we intended just to
clear BIT(0).

Fixes: 90d52d57 ("PCI: qcom: Add support for IPQ4019 PCIe controller")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: NJohn Crispin <john@phrozen.org>

This patch converts existing regulators to use regulator bulk apis,
to make it consistent with msm8996 changes also cut down some redundant code.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

This patch adds supplies that are required for msm8996. vdda
is analog supply that go in to controller, and vddpe_3v3 is
supply to PCIe endpoint.

Without these supplies PCIe endpoints which require power supplies are
not enumerated at all, as there is no one to power it up.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: NRob Herring <robh@kernel.org>

Implement a multiplexed IRQ domain hierarchy API in the pcie-designware
host bridge driver that funnels all MSI IRQs into a single parent
interrupt, moving away from the obsolete struct msi_controller based
API.

Although the old implementation API is still available, pcie-designware
will now use the multiplexed IRQ domains hierarchical API.

Remove all existing dwc based host bridges MSI IRQs handlers, in that the
hierarchical API now handles MSI IRQs through the hierarchical/chained
MSI domain implementation.
Signed-off-by: NGustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NNiklas Cassel <niklas.cassel@axis.com>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>

Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.

Remove the boilerplate GPL version 2 language, relying on the assertion in
b2441318 ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver creates various const structures that it stores in the
data field of an of_device_id array.

Adding const to the declaration of the location that receives the
const value from the data field ensures that the compiler will
continue to check that the value is not modified.  Furthermore, the
const-discarding cast on the extraction from the data field is no
longer needed.

Done using Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports Gen 1/2, one
lane, two PCIe root complex with support for MSI and legacy interrupts, and
it conforms to PCI Express Base 2.1 specification.

The core init is the similar to the existing SoC, however the clocks and
reset lines differ.
Signed-off-by: Nsmuthayy <smuthayy@codeaurora.org>
Signed-off-by: NVaradarajan Narayanan <varada@codeaurora.org>
[bhelgaas: fix capitalization and "dev" usage to match existing style]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Presently, when support for a new SoC is added, the driver ops structures
and functions are versioned with plain 1, 2, 3 etc.  Instead use the block
IP version number.
Signed-off-by: NVaradarajan Narayanan <varada@codeaurora.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls to
explicitly state whether the driver needs exclusive or shared reset control
behavior. Convert all drivers requesting exclusive resets to the explicit
API call so the temporary transition helpers can be removed.

No functional changes.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>

The reset GPIO can be connected to a I2C or SPI IO expander, which may
sleep, so it is safer to use the gpiod_set_value_cansleep() variant
instead.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

host_init() should detect and propagate errors from post_init().

In addition, by acknowledging that post_init() can fail we must disable the
post_init() resources in a step separate from the deinit, so that we don't
try to disable the post_init() resources a second time.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

When the init op fails it will restore the state of the resources, so we
should not disable them one more time when this happens.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>

In several dwc-based drivers, ->host_init() can fail, so make sure to
propagate and handle this to avoid continuing operation of a driver or
hardware in an invalid state.
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJoao Pinto <jpinto@synopsys.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>

Limit TLP size to 2K to work around a hardware bug in the v0 version of
PCIe IP.  When using default TLP size of 4K, the internal buffer gets
corrupted due to this hardware bug.

This bug was originally noticed during ssh session between APQ8064-based
board and PC.  Network packets got corrupted randomly and terminated the ssh
session due to this bug.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Trivial fix to spelling mistake in dev_err message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Previously the v0, v1, and v2 functions were not grouped together in a
consistent order.  Reorder them to make them consistent.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add support for the IPQ4019 PCIe controller.  IPQ4019 supports Gen 1/2, one
lane, one PCIe root complex with support for MSI and legacy interrupts, and
it conforms to PCI Express Base 2.1 specification.

The core init is the same as for the MSM8996, however the clocks and reset
lines differ.

[bhelgaas: fix qcom_pcie_get_resources_v3(), qcom_pcie_init_v3() compile
issues]
Signed-off-by: NJohn Crispin <john@phrozen.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Acked-by: Rob Herring <robh@kernel.org>		# binding

The dw_pcie_host_ops structures are never modified.  Constify these
structures such that these can be write-protected.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>

Similar as commit 8ff0ef99 ("PCI: host: Mark PCIe/PCI (MSI) IRQ cascade
handlers as IRQF_NO_THREAD"), we should mark PCIe/PCI (MSI) IRQ cascade
handlers in designware, qcom, and vmd as IRQF_NO_THREAD explicitly.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>	# vmd
Acked-by: Jingoo Han <jingoohan1@gmail.com>	# pcie-designware-plat.c

PCI configuration space should be mapped with a memory region type that
generates on the CPU host bus non-posted write transations. Update the
driver to use the devm_pci_remap_cfg* interface to make sure the correct
memory mappings for PCI configuration space are used.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>

Fix the following crash, seen in dwc/pci-imx6.

  Unable to handle kernel NULL pointer dereference at virtual address 00000070
  pgd = c0004000
  [00000070] *pgd=00000000
  Internal error: Oops: 805 [#1] SMP ARM
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.10.0-09686-g9e314890 #1
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  task: cb850000 task.stack: cb84e000
  PC is at imx6_pcie_probe+0x2f4/0x414
  ...

While at it, fix the same problem in various drivers instead of waiting for
individual crash reports.

The change in the imx6 driver was tested with qemu. The changes in other
drivers are based on code inspection and have been compile tested only.

Fixes: 442ec4c0 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures")
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>  # designware-plat
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>

Keep only the host-specific members in struct pcie_port and move the common
members (i.e common to both host and endpoint) to struct dw_pcie.  This is
in preparation for adding endpoint mode support to designware driver.

While at that also fix checkpatch warnings.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

No functional change. dw_pcie_cfg_read()/dw_pcie_cfg_write() doesn't do
anything specific to access configuration space. It can be just renamed to
dw_pcie_read()/dw_pcie_write() and used to read/write data to dbi space.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-By: NJoao Pinto <jpinto@synopsys.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

Add platform_set_drvdata() in all designware-based drivers to store the
private data structure of the driver so that dev_set_drvdata() can be used
to get back private data structure in add_pcie_port/host_init.  This is in
preparation for splitting struct pcie_port into core and host only
structures. After the split pcie_port will not be part of the driver's
private data structure and *container_of* used now to get the private data
pointer cannot be used.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Jingoo Han <jingoohan1@gmail.com>
CC: Richard Zhu <hongxing.zhu@nxp.com>
CC: Lucas Stach <l.stach@pengutronix.de>
CC: Murali Karicheri <m-karicheri2@ti.com>
CC: Minghuan Lian <minghuan.Lian@freescale.com>
CC: Mingkai Hu <mingkai.hu@freescale.com>
CC: Roy Zang <tie-fei.zang@freescale.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Niklas Cassel <niklas.cassel@axis.com>
CC: Jesper Nilsson <jesper.nilsson@axis.com>
CC: Joao Pinto <Joao.Pinto@synopsys.com>
CC: Zhou Wang <wangzhou1@hisilicon.com>
CC: Gabriele Paoloni <gabriele.paoloni@huawei.com>
CC: Stanimir Varbanov <svarbanov@mm-sol.com>
CC: Pratyush Anand <pratyush.anand@gmail.com>

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR to avoid the
following warnings found by scripts/coccinelle/api/ptr_ret.cocci:

  drivers/pci/dwc/pcie-qcom.c:215:1-3: WARNING: PTR_ERR_OR_ZERO can be used
  drivers/pci/dwc/pcie-qcom.c:247:1-3: WARNING: PTR_ERR_OR_ZERO can be used
  drivers/pci/dwc/pcie-qcom.c:481:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>

Group all the PCI drivers that use DesignWare core in dwc directory.
dwc IP is capable of operating in both host mode and device mode and
keeping it inside the *host* directory is misleading.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jingoohan1@gmail.com>
Acked-By: NJoao Pinto <jpinto@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>

Add support for the MSM8996/APQ8096 PCIe controller.  MSM8996 supports Gen
1/2, one lane, 3 PCIe root complexes with support for MSI and legacy
interrupts, and it conforms to PCI Express Base 2.1 specification.

Add a post_init callback to qcom_pcie_ops, as the PCIe pipe clocks are only
setup after the phy is powered on.  It also adds an ltssm_enable callback
as it is very much different from other supported SoCs in the driver.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NStanimir Varbanov <svarbanov@mm-sol.com>