- 30 4月, 2015 1 次提交
-
-
由 Nicolas Dichtel 提交于
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a89 ("net: create generic bridge ops") Fixes: 815cccbf ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend <john.r.fastabend@intel.com> CC: Sathya Perla <sathya.perla@emulex.com> CC: Subbu Seetharaman <subbu.seetharaman@emulex.com> CC: Ajit Khaparde <ajit.khaparde@emulex.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko <jiri@resnulli.us> CC: Scott Feldman <sfeldma@gmail.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2015 3 次提交
-
-
由 Vlad Zolotarov 提交于
Implements the new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key. This patch limits the new feature support to 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: NVlad Zolotarov <vladz@cloudius-systems.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vlad Zolotarov 提交于
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options. Signed-off-by: NVlad Zolotarov <vladz@cloudius-systems.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Vlad Zolotarov 提交于
This patch is a preparation for enablement of ethtool RSS indirection table and hash key querying. We don't want to read registers every time the RSS info is queried. Therefore we will store its current content in the arrays in the adapter struct and will read it from there (instead of from registers) when requested. Will change the code that writes the indirection table and hash key into the HW registers to take its content from these arrays. This will also simplify the indirection table updating ethtool callback implementation in the future. Signed-off-by: NVlad Zolotarov <vladz@cloudius-systems.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 10 4月, 2015 5 次提交
-
-
由 Alexander Duyck 提交于
The ixgbe driver hasn't used call_rcu to free the rings for some time now. Since that is the case the call to rcu_barrier can be dropped since calls to kfree_rcu don't require it. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that the HW_VLAN_CTAG_FILTER bit is not falsely advertised as being a feature that can be toggled on ixgbe parts. The driver was setting the bit in features and letting it be inherited by hw_features, however the driver was actually ignoring the value of the bit and just assuming it was always set. As a result VLAN filtering was always enabled which is a requirement for SR-IOV, VMDq, DCB, FCoE, and possibly other features within the adapters. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch will enable X550 Source Address Prunning for VEPA bridge mode. This requires that we also have replication enabled as well, while in this mode. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch gathers together all the logic needed to configure bridge modes. Currently that it is rather simple but this is really laying the ground work for future X550 feature enhancement. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
We are currently storing our BRIDGE_MODE as a bit in our adapter flags. This patch will store the actual mode instead which minimizes obfuscation and makes following patches for X550 simpler. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 14 3月, 2015 2 次提交
-
-
由 Alexander Duyck 提交于
This patch removes some dead code from the cleanup path for ixgbe. Setting and clearing the flag doesn't do anything since all we are doing is setting the flag, scheduling NAPI, clearing the flag and then letting netpoll do the polling cleanup. As such it doesn't make much sense to have it there. This patch also removes one minor white-space error. CC: <kernel-team@fb.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
For the X550 mac type we have to do additional steps around enabling/disabling Rx. This patch will add a layer of indirection around these support functions to enable this. CC: <kernel-team@fb.com> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 3月, 2015 1 次提交
-
-
由 Joe Perches 提交于
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2015 1 次提交
-
-
由 Joe Perches 提交于
Use the built-in function instead of memset. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2015 2 次提交
-
-
由 Don Skidmore 提交于
This patch enables the ethertype Anti-Spoofing feature for affected devices. It is configured such that LLDP packets sent by a VF will be dropped. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Add support VXLAN receive checksum offload in X550 hardware. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 02 2月, 2015 1 次提交
-
-
由 Roopa Prabhu 提交于
bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 1月, 2015 1 次提交
-
-
由 Toshiaki Makita 提交于
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbe_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2015 1 次提交
-
-
由 Jiri Pirko 提交于
The same macros are used for rx as well. So rename it. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
This change makes it so that dma_rmb is used when reading the Rx descriptor. The advantage of dma_rmb is that it allows for a much lower cost barrier on x86, powerpc, arm, and arm64 architectures than a traditional memory barrier when dealing with reads that only have to synchronize to coherent memory. In addition I have updated the code so that it just checks to see if any bits have been set instead of just the DD bit since the DD bit will always be set as a part of a descriptor write-back so we just need to check for a non-zero value being present at that memory location rather than just checking for any specific bit. This allows the code itself to appear much cleaner and allows the compiler more room to optimize. Cc: Matthew Vick <matthew.vick@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
This change replaces calls to netdev_alloc_skb_ip_align with napi_alloc_skb. The advantage of napi_alloc_skb is currently the fact that the page allocation doesn't make use of any irq disable calls. There are few spots where I couldn't replace the calls as the buffer allocation routine is called as a part of init which is outside of the softirq context. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
Update the Intel Ethernet drivers to use eth_skb_pad() and skb_put_padto instead of doing their own implementations of the function. Also this cleans up two other spots where skb_pad was called but the length and tail pointers were being manipulated directly instead of just having the padding length added via __skb_put. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2014 8 次提交
-
-
由 Emil Tantilov 提交于
The driver has logic to free up used data in case any of the checks in ixgbe_probe() fail, however there is a similar set of cleanups that can occur on driver unload in ixgbe_remove() which can cause the rmmod command to crash. This patch aims to fix the logic by moving pci_set_drvdata() after all error checks and then adds a check in ixgbe_remove() to skip it altogether if adapter comes up empty. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
Since we now support X550 mac's bump the version number to reflect this. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
The new X550 family of MAC's will have a larger RSS hash (16 -> 64). It will also support individual VF to have their own independent RSS hash key. This patch will enable this functionality Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Accessing the CIAA/D register can block access to the PCI config space. This patch removes the read/write operations to the CIAA/D registers and makes use of standard kernel functions for accessing the PCI config space. In addition it moves ixgbevf_check_for_bad_vf() into the watchdog subtask which reduces the frequency of the checks. CC: Alex Williamson <alex.williamson@redhat.com> Reported-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Martin K Petersen 提交于
Attempt to look up the MAC address in Open Firmware on systems that support it. On SPARC resort to using the IDPROM if no OF address is found. Signed-off-by: NMartin K Petersen <martin.petersen@oracle.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the tail writes for the ixgbe descriptor queues. The current implementation had me confused as I wasn't sure if it was still making use of the surprise remove logic or not. It also adds the mmiowb which is needed on ia64, mips, and a couple other architectures in order to synchronize the MMIO writes with the Tx queue _xmit_lock spinlock. Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch cleans up the page reuse code getting it into a state where all the workarounds needed are in place as well as cleaning up a few minor oversights such as using __free_pages instead of put_page to drop a locally allocated page. It also cleans up how we clear the descriptor status bits. Previously they were zeroed as a part of clearing the hdr_addr. However the hdr_addr is a 64 bit field and 64 bit writes can be a bit more expensive on on 32 bit systems. Since we are no longer using the header split feature the upper 32 bits of the address no longer need to be cleared. As a result we can just clear the status bits and leave the length and VLAN fields as-is which should provide more information in debugging. Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 03 12月, 2014 2 次提交
-
-
由 Scott Feldman 提交于
To allow brport device to return current brport flags set on port. Add returned flags to nested IFLA_PROTINFO netlink msg built in dflt getlink. With this change, netlink msg returned for bridge_getlink contains the port's offloaded flag settings (the port's SELF settings). Signed-off-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Do the work of parsing NDA_VLAN directly in rtnetlink code, pass simple u16 vid to drivers from there. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 11月, 2014 2 次提交
-
-
由 Thomas Graf 提交于
ndo_bridge_setlink() is currently only called on the slave if IFLA_AF_SPEC is set but this is a very fragile assumption and may change in the future. Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Payload is currently accessed blindly and may exceed valid message boundaries. Fixes: a77dcb8c ("be2net: set and query VEB/VEPA mode of the PF interface") Fixes: 815cccbf ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2014 2 次提交
-
-
由 Daniel Borkmann 提交于
While working on a different issue, I noticed an annoying use after free bug on my machine when unloading the ixgbe driver: [ 8642.318797] ixgbe 0000:02:00.1: removed PHC on p2p2 [ 8642.742716] ixgbe 0000:02:00.1: complete [ 8642.743784] BUG: unable to handle kernel paging request at ffff8807d3740a90 [ 8642.744828] IP: [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [ 8642.745886] PGD 20c6067 PUD 81c1f6067 PMD 81c15a067 PTE 80000007d3740060 [ 8642.746956] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 8642.748039] Modules linked in: [...] [ 8642.752929] CPU: 1 PID: 1225 Comm: rmmod Not tainted 3.18.0-rc2+ #49 [ 8642.754203] Hardware name: Supermicro X10SLM-F/X10SLM-F, BIOS 1.1b 11/01/2013 [ 8642.755505] task: ffff8807e34d3fe0 ti: ffff8807b7204000 task.ti: ffff8807b7204000 [ 8642.756831] RIP: 0010:[<ffffffffa01c77dc>] [<ffffffffa01c77dc>] ixgbe_remove+0xfc/0x1b0 [ixgbe] [...] [ 8642.774335] Stack: [ 8642.775805] ffff8807ee824098 ffff8807ee824098 ffffffffa01f3000 ffff8807ee824000 [ 8642.777326] ffff8807b7207e18 ffffffff8137720f ffff8807ee824098 ffff8807ee824098 [ 8642.778848] ffffffffa01f3068 ffff8807ee8240f8 ffff8807b7207e38 ffffffff8144180f [ 8642.780365] Call Trace: [ 8642.781869] [<ffffffff8137720f>] pci_device_remove+0x3f/0xc0 [ 8642.783395] [<ffffffff8144180f>] __device_release_driver+0x7f/0xf0 [ 8642.784876] [<ffffffff814421f8>] driver_detach+0xb8/0xc0 [ 8642.786352] [<ffffffff814414a9>] bus_remove_driver+0x59/0xe0 [ 8642.787783] [<ffffffff814429d0>] driver_unregister+0x30/0x70 [ 8642.789202] [<ffffffff81375c65>] pci_unregister_driver+0x25/0xa0 [ 8642.790657] [<ffffffffa01eb38e>] ixgbe_exit_module+0x1c/0xc8e [ixgbe] [ 8642.792064] [<ffffffff810f93a2>] SyS_delete_module+0x132/0x1c0 [ 8642.793450] [<ffffffff81012c61>] ? do_notify_resume+0x61/0xa0 [ 8642.794837] [<ffffffff816d2029>] system_call_fastpath+0x12/0x17 The issue is that test_and_set_bit() done on adapter->state is being performed *after* the netdevice has been freed via free_netdev(). When netdev is being allocated on initialization time, it allocates a private area, here struct ixgbe_adapter, that resides after the net_device structure. In ixgbe_probe(), the device init routine, we set up the adapter after alloc_etherdev_mq() on the private area and add a reference for the pci_dev as well via pci_set_drvdata(). Both in the error path of ixgbe_probe(), but also on module unload when ixgbe_remove() is being called, commit 41c62843 ("ixgbe: Fix rcu warnings induced by LER") accesses adapter after free_netdev(). The patch stores the result in a bool and thus fixes above oops on my side. Fixes: 41c62843 ("ixgbe: Fix rcu warnings induced by LER") Cc: stable <stable@vger.kernel.org> Cc: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
IXGBE adapter seems to require that VLAN filtering be enabled if VMDQ or SRIOV are enabled. When those functions are disabled, VLAN filtering may be disabled in promiscuous mode. Prior to commit a9b8943e ("ixgbe: remove vlan_filter_disable and enable functions") The logic was correct. However, after the commit the logic got reversed and VLAN filtered in now turned on when VMDQ/SRIOV is disabled. This patch changes the condition to enable hw vlan filtered when VMDQ or SRIOV is enabled. Fixes: a9b8943e ("ixgbe: remove vlan_filter_disable and enable functions") Cc: stable <stable@vger.kernel.org> CC: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com> Acked-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
The Intel drivers were pretty much just using the plain vanilla GFP flags in their calls to __skb_alloc_page so this change makes it so that they use dev_alloc_page which just uses GFP_ATOMIC for the gfp_flags value. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2014 2 次提交
-
-
由 Don Skidmore 提交于
Split off the setting of the RSS key into its own function. This will help when we add support for X550 which can have different RSS keys per pool. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
This patch will add in the new MAC defines and fit it into the switch cases throughout the driver. New functionality and enablement support will be added in following patches. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 30 10月, 2014 1 次提交
-
-
由 Junwei Zhang 提交于
Signed-off-by: NMartin Zhang <martinbj2008@gmail.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-