Check KR2 recovery time at the beginning of the work-around function.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update SCTP maintainers list.
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mathias Krause says:

====================
a few more info leak fixes in the recvmsg path. The error pattern here
is the protocol specific recvmsg function is missing the msg_namelen
assignment -- either completely or in early exit paths that do not
result in errors in __sys_recvmsg()/sys_recvfrom() and, in turn, make
them call move_addr_to_user(), leaking the then still uninitialized
sockaddr_storage stack variable to userland.

My audit was initiated by a rather coarse fix of the leak that can be
found in the grsecurity patch, putting a penalty on protocols complying
to the rules of recvmsg. So credits for finding the leak in the recvmsg
path in __sys_recvmsg() should go to Brad!

The buggy protocols/subsystems are rather obscure anyway. As a missing
assignment of msg_namelen coupled with a missing filling of msg_name
would only result in garbage -- the leak -- in case userland would care
about that information, i.e. would provide a msg_name pointer. But
obviously current userland does not.

While auditing the code for the above pattern I found a few more
'uninitialized members' kind of leaks related to the msg_name filling.
Those are fixed in this series, too.

I have to admit, I failed to test all of the patches due to missing
hardware, e.g. iucv depends on S390 -- hardware I've no access to :/
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code misses to update the msg_namelen member to 0 and therefore
makes net/socket.c leak the local, uninitialized sockaddr_storage
variable to userland -- 128 bytes of kernel stack memory.

Cc: Andy King <acking@vmware.com>
Cc: Dmitry Torokhov <dtor@vmware.com>
Cc: George Zhang <georgezhang@vmware.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case we received no data on the call to skb_recv_datagram(), i.e.
skb->data is NULL, vmci_transport_dgram_dequeue() will return with 0
without updating msg_namelen leading to net/socket.c leaking the local,
uninitialized sockaddr_storage variable to userland -- 128 bytes of
kernel stack memory.

Fix this by moving the already existing msg_namelen assignment a few
lines above.

Cc: Andy King <acking@vmware.com>
Cc: Dmitry Torokhov <dtor@vmware.com>
Cc: George Zhang <georgezhang@vmware.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code in set_orig_addr() does not initialize all of the members of
struct sockaddr_tipc when filling the sockaddr info -- namely the union
is only partly filled. This will make recv_msg() and recv_stream() --
the only users of this function -- leak kernel stack memory as the
msg_name member is a local variable in net/socket.c.

Additionally to that both recv_msg() and recv_stream() fail to update
the msg_namelen member to 0 while otherwise returning with 0, i.e.
"success". This is the case for, e.g., non-blocking sockets. This will
lead to a 128 byte kernel stack leak in net/socket.c.

Fix the first issue by initializing the memory of the union with
memset(0). Fix the second one by setting msg_namelen to 0 early as it
will be updated later if we're going to fill the msg_name member.

Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code in rose_recvmsg() does not initialize all of the members of
struct sockaddr_rose/full_sockaddr_rose when filling the sockaddr info.
Nor does it initialize the padding bytes of the structure inserted by
the compiler for alignment. This will lead to leaking uninitialized
kernel stack bytes in net/socket.c.

Fix the issue by initializing the memory used for sockaddr info with
memset(0).

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code in llcp_sock_recvmsg() does not initialize all the members of
struct sockaddr_nfc_llcp when filling the sockaddr info. Nor does it
initialize the padding bytes of the structure inserted by the compiler
for alignment.

Also, if the socket is in state LLCP_CLOSED or is shutting down during
receive the msg_namelen member is not updated to 0 while otherwise
returning with 0, i.e. "success". The msg_namelen update is also
missing for stream and seqpacket sockets which don't fill the sockaddr
info.

Both issues lead to the fact that the code will leak uninitialized
kernel stack bytes in net/socket.c.

Fix the first issue by initializing the memory used for sockaddr info
with memset(0). Fix the second one by setting msg_namelen to 0 early.
It will be updated later if we're going to fill the msg_name member.

Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case msg_name is set the sockaddr info gets filled out, as
requested, but the code fails to initialize the padding bytes of
struct sockaddr_ax25 inserted by the compiler for alignment. Also
the sax25_ndigis member does not get assigned, leaking four more
bytes.

Both issues lead to the fact that the code will leak uninitialized
kernel stack bytes in net/socket.c.

Fix both issues by initializing the memory with memset(0).

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For stream sockets the code misses to update the msg_namelen member
to 0 and therefore makes net/socket.c leak the local, uninitialized
sockaddr_storage variable to userland -- 128 bytes of kernel stack
memory. The msg_namelen update is also missing for datagram sockets
in case the socket is shutting down during receive.

Fix both issues by setting msg_namelen to 0 early. It will be
updated later if we're going to fill the msg_name member.

Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The L2TP code for IPv6 fails to initialize the l2tp_conn_id member of
struct sockaddr_l2tpip6 and therefore leaks four bytes kernel stack
in l2tp_ip6_recvmsg() in case msg_name is set.

Initialize l2tp_conn_id with 0 to avoid the info leak.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code does not fill the msg_name member in case it is set.
It also does not set the msg_namelen member to 0 and therefore makes
net/socket.c leak the local, uninitialized sockaddr_storage variable
to userland -- 128 bytes of kernel stack memory.

Fix that by simply setting msg_namelen to 0 as obviously nobody cared
about iucv_sock_recvmsg() not filling the msg_name in case it was set.

Cc: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code does not fill the msg_name member in case it is set.
It also does not set the msg_namelen member to 0 and therefore makes
net/socket.c leak the local, uninitialized sockaddr_storage variable
to userland -- 128 bytes of kernel stack memory.

Fix that by simply setting msg_namelen to 0 as obviously nobody cared
about irda_recvmsg_dgram() not filling the msg_name in case it was
set.

Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code does not fill the msg_name member in case it is set.
It also does not set the msg_namelen member to 0 and therefore makes
net/socket.c leak the local, uninitialized sockaddr_storage variable
to userland -- 128 bytes of kernel stack memory.

Fix that by simply setting msg_namelen to 0 as obviously nobody cared
about caif_seqpkt_recvmsg() not filling the msg_name in case it was
set.

Cc: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the socket is in state BT_CONNECT2 and BT_SK_DEFER_SETUP is set in
the flags, sco_sock_recvmsg() returns early with 0 without updating the
possibly set msg_namelen member. This, in turn, leads to a 128 byte
kernel stack leak in net/socket.c.

Fix this by updating msg_namelen in this case. For all other cases it
will be handled in bt_sock_recvmsg().

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns
early with 0 without updating the possibly set msg_namelen member. This,
in turn, leads to a 128 byte kernel stack leak in net/socket.c.

Fix this by updating msg_namelen in this case. For all other cases it
will be handled in bt_sock_stream_recvmsg().

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the socket is already shutting down, bt_sock_recvmsg() returns
with 0 without updating msg_namelen leading to net/socket.c leaking the
local, uninitialized sockaddr_storage variable to userland -- 128 bytes
of kernel stack memory.

Fix this by moving the msg_namelen assignment in front of the shutdown
test.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When msg_namelen is non-zero the sockaddr info gets filled out, as
requested, but the code fails to initialize the padding bytes of struct
sockaddr_ax25 inserted by the compiler for alignment. Additionally the
msg_namelen value is updated to sizeof(struct full_sockaddr_ax25) but is
not always filled up to this size.

Both issues lead to the fact that the code will leak uninitialized
kernel stack bytes in net/socket.c.

Fix both issues by initializing the memory with memset(0).

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code does not fill the msg_name member in case it is set.
It also does not set the msg_namelen member to 0 and therefore makes
net/socket.c leak the local, uninitialized sockaddr_storage variable
to userland -- 128 bytes of kernel stack memory.

Fix that by simply setting msg_namelen to 0 as obviously nobody cared
about vcc_recvmsg() not filling the msg_name in case it was set.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tetja Rediske found that if the host receives an ICMPv6 redirect message
after sending a SYN+ACK, the connection will be reset.

He bisected it down to 093d04d4 (ipv6: Change skb->data before using
icmpv6_notify() to propagate redirect), but the origin of the bug comes
from ec18d9a2 (ipv6: Add redirect support to all protocol icmp error
handlers.). The bug simply did not trigger prior to 093d04d4, because
skb->data did not point to the inner IP header and thus icmpv6_notify
did not call the correct err_handler.

This patch adds the missing "goto out;" in tcp_v6_err. After receiving
an ICMPv6 Redirect, we should not continue processing the ICMP in
tcp_v6_err, as this may trigger the removal of request-socks or setting
sk_err(_soft).
Reported-by: NTetja Rediske <tetja@tetja.de>
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix erroneous sock_orphan() leading to crashes and double
    kfree_skb() in NFC protocol.  From Thierry Escande and Samuel Ortiz.

 2) Fix use after free in remain-on-channel mac80211 code, from Johannes
    Berg.

 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can
    leak it from one namespace into another.  Fix from Gao Feng and
    Patrick McHardy.

 4) Fix overflow in channel scanning array of mwifiex driver, from Stone
    Piao.

 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang.

 6) Synchronization of unicast address lists to the undelying device
    doesn't work because whether to sync is maintained as a boolean
    rather than a true count.  Fix from Vlad Yasevich.

 7) Fix corruption of TSO packets in atl1e by limiting the segmented
    packet length.  From Hannes Frederic Sowa.

 8) Revert bogus AF_UNIX credential passing change and fix the
    coalescing issue properly, from Eric W Biederman.

 9) Changes of ipv4 address lifetime settings needs to generate a
    notification, from Jiri Pirko.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  netfilter: don't reset nf_trace in nf_reset()
  net: ipv4: notify when address lifetime changes
  ixgbe: fix registration order of driver and DCA nofitication
  af_unix: If we don't care about credentials coallesce all messages
  Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL"
  bonding: remove sysfs before removing devices
  atl1e: limit gso segment size to prevent generation of wrong ip length fields
  net: count hw_addr syncs so that unsync works properly.
  r8169: fix auto speed down issue
  netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths
  mwifiex: limit channel number not to overflow memory
  NFC: microread: Fix build failure due to a new MEI bus API
  iwlwifi: dvm: fix the passive-no-RX workaround
  netfilter: nf_conntrack: fix error return code
  NFC: llcp: Keep the connected socket parent pointer alive
  mac80211: fix idle handling sequence
  netfilter: nfnetlink_acct: return -EINVAL if object name is empty
  netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init()
  netfilter: reset nf_trace in nf_reset
  mac80211: fix remain-on-channel cancel crash
  ...

Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code
to reset nf_trace in nf_reset(). This is wrong and unnecessary.

nf_reset() is used in the following cases:

- when passing packets up the the socket layer, at which point we want to
  release all netfilter references that might keep modules pinned while
  the packet is queued. nf_trace doesn't matter anymore at this point.

- when encapsulating or decapsulating IPsec packets. We want to continue
  tracing these packets after IPsec processing.

- when passing packets through virtual network devices. Only devices on
  that encapsulate in IPv4/v6 matter since otherwise nf_trace is not
  used anymore. Its not entirely clear whether those packets should
  be traced after that, however we've always done that.

- when passing packets through virtual network devices that make the
  packet cross network namespace boundaries. This is the only cases
  where we clearly want to reset nf_trace and is also what the
  original patch intended to fix.

Add a new function nf_reset_trace() and use it in dev_forward_skb() to
fix this properly.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull MIPS fixes from Ralf Baechle:
 "Fixes for a number of small glitches in various corners of the MIPS
  tree.  No particular areas is standing out.

  With this applied all MIPS defconfigs are building fine.  No merge
  conflicts are expected."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Delete definition of SA_RESTORER.
  MIPS: Fix ISA level which causes secondary cache init bypassing and more
  MIPS: Fix build error cavium-octeon without CONFIG_SMP
  MIPS: Kconfig: Rename SNIPROM too
  MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI"
  MIPS: Unbreak function tracer for 64-bit kernel.

Pull GFS2 fixes from Steven Whitehouse:
 "There are two patches which fix up a couple of minor issues in the DLM
  interface code, a missing error path in gfs2_rs_alloc(), one patch
  which fixes a problem during "withdraw" and a fix for discards/FITRIM
  when using 4k sector sized devices."

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Issue discards in 512b sectors
  GFS2: Fix unlock of fcntl locks during withdrawn state
  GFS2: return error if malloc failed in gfs2_rs_alloc()
  GFS2: use memchr_inv
  GFS2: use kmalloc for lvb bitmap

Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware
file potentially breaking the ABI.

This patch reverts that aspect of the fix as well as reverting the
firmware name as used in qib.
Reported-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull spi fixes from Mark Brown:
 "A bunch of small driver fixes plus a fix for error handling in the
  core - nothing too exciting overall."

* tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc:
  spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts
  spi: Unlock a spinlock before calling into the controller driver.
  spi/s3c64xx: modified error interrupt handling and init
  spi/bcm63xx: don't disable non enabled clocks in probe error path
  spi/bcm63xx: Remove unused variable
  spi: slink-tegra20: move runtime pm calls to transfer_one_message

This patch changes GFS2's discard issuing code so that it calls
function sb_issue_discard rather than blkdev_issue_discard. The
code was calling blkdev_issue_discard and specifying the correct
sector offset and sector size, but blkdev_issue_discard expects
these values to be in terms of 512 byte sectors, even if the native
sector size for the device is different. Calling sb_issue_discard
with the BLOCK size instead ensures the correct block-to-512b-sector
translation. I verified that "minlen" is specified in blocks, so
comparing it to a number of blocks is correct.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This reverts commit 0ef1594c.

This patch introduced a few races which cannot be easily fixed with a
small follow-up patch. Furthermore, the SoC with the broken hardware
register, which this patch intended to add support for, can only be used
with device trees, which this driver currently does not support.

[ Here is the discussion that led to this "revert" patch:
  https://lkml.org/lkml/2013/4/3/176 ]

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull fbdev fixes from Tomi Valkeinen:
 "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode
  code"

* tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux:
  video:uvesafb: Fix dereference NULL pointer code path
  fbmon: use VESA_DMT_VSYNC_HIGH to fix typo

Pull sound fixes from Takashi Iwai:
 "This contains slightly more volumes than usual at this stage, mostly
  because of my vacation in the last week.  Nothing to scare, all small
  and/or trivial fixes:

   - Fix loop path handling in ASoC DAPM
   - Some memory handling fixes in ASoC core
   - Fix spear_pcm to adapt to the updated API
   - HD-audio HDMI ELD handling fixes
   - Fix for CM6331 USB-audio SRC change bugs
   - Revert power_save_controller option change due to user-space usage
   - A few other small ASoC and HD-audio fixes"

* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/generic - fix uninitialized variable
  Revert "ALSA: hda - Allow power_save_controller option override DCAPS"
  ALSA: hda - fix typo in proc output
  ALSA: hda - Enabling Realtek ALC 671 codec
  ALSA: usb: Work around CM6631 sample rate change bug
  ALSA: hda - bug fix on HDMI ELD debug message
  ALSA: hda - bug fix on return value when getting HDMI ELD info
  ASoC: dma-sh7760: Fix compile error
  ASoC: core: fix invalid free of devm_ allocated data
  ASoC: spear_pcm: Update to new pcm_new() API
  ASoC:: max98090: Remove executable bit
  ASoC: dapm: Fix pointer dereference in is_connected_output_ep()
  ASoC: pcm030 audio fabric: remove __init from probe
  ASoC: imx-ssi: Fix occasional AC97 reset failure
  ASoC: core: fix possible memory leak in snd_soc_bytes_put()
  ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff()
  ASoC: dapm: Fix handling of loops
  ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case

SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever
supported its use and no libc was using it, so the entire sa-restorer
functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.]
for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid
accidental reuse of the mask bit.

Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear
sa_restorer on execve] adds code that assumes sa_sigaction has an
sa_restorer field, if SA_RESTORER is defined which would break MIPS.
So remove the SA_RESTORER definition before the v3.8.4 merge.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
(cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8)

The commit a96102be introduced set_isa() where compatible ISA info is
also set aside from the one gets passed in. It means, for example, 1004K
will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like
the following inappropriate:

if (c->isa_level == MIPS_CPU_ISA_M32R1 ||
    c->isa_level == MIPS_CPU_ISA_M32R2 ||
    c->isa_level == MIPS_CPU_ISA_M64R1 ||
    c->isa_level == MIPS_CPU_ISA_M64R2)

This patch fixes it.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Singed-off-by: NEunBong Song <eunb.song@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CONFIG_SNIPROM was renamed to CONFIG_FW_SNIPROM in v3.8. Let's rename
SNIPROM itself too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org;
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 7517de34 ("MIPS: Alchemy: Redo
PCI as platform driver") added a reference to CONFIG_DEBUG_PCI. Change
it to CONFIG_PCI_DEBUG, as that is a valid Kconfig macro.

Also add a newline to a debugging printk that this fix enables.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 58b69401 [MIPS: Function tracer: Fix broken function tracing]
completely broke the function tracer for 64-bit kernels.  The symptom is
a system hang very early in the boot process.

The fix: Remove/fix $sp adjustments for 64-bit case.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Al Cooper <alcooperx@gmail.com>
Cc: viric@viric.name
Cc: stable@vger.kernel.org # 3.8.x
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

changed is not initialized in path_power_down_sync, but it is expected
to be false in case no change happened in the loop. So set it to
false.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

if userspace changes lifetime of address, send netlink notification and
call notifier.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ixgbe_notify_dca cannot be called before driver registration
because it expects driver's klist_devices to be allocated and
initialized. While on it make sure debugfs files are removed
when registration fails.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJakub Kicinski <jakub.kicinski@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was reported that the following LSB test case failed
https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we
were not coallescing unix stream messages when the application was
expecting us to.

The problem was that the first send was before the socket was accepted
and thus sock->sk_socket was NULL in maybe_add_creds, and the second
send after the socket was accepted had a non-NULL value for sk->socket
and thus we could tell the credentials were not needed so we did not
bother.

The unnecessary credentials on the first message cause
unix_stream_recvmsg to start verifying that all messages had the same
credentials before coallescing and then the coallescing failed because
the second message had no credentials.

Ignoring credentials when we don't care in unix_stream_recvmsg fixes a
long standing pessimization which would fail to coallesce messages when
reading from a unix stream socket if the senders were different even if
we did not care about their credentials.

I have tested this and verified that the in the LSB test case mentioned
above that the messages do coallesce now, while the were failing to
coallesce without this change.
Reported-by: NKarel Srot <ksrot@redhat.com>
Reported-by: NDing Tianhong <dingtianhong@huawei.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>