- 19 5月, 2010 13 次提交
-
-
由 Shane Wang 提交于
Per document, for feature control MSR: Bit 1 enables VMXON in SMX operation. If the bit is clear, execution of VMXON in SMX operation causes a general-protection exception. Bit 2 enables VMXON outside SMX operation. If the bit is clear, execution of VMXON outside SMX operation causes a general-protection exception. This patch is to enable this kind of check with SMX for VMXON in KVM. Signed-off-by: NShane Wang <shane.wang@intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Marcelo Tosatti 提交于
The recent changes to emulate string instructions without entering guest mode exposed a bug where pending interrupts are not properly reflected in ready_for_interrupt_injection. The result is that userspace overwrites a previously queued interrupt, when irqchip's are emulated in userspace. Fix by always updating state before returning to userspace. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
When EPT is enabled, we cannot emulate EFER.NX=0 through the shadow page tables. This causes accesses through ptes with bit 63 set to succeed instead of failing a reserved bit check. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Some guest msr values cannot be used on the host (for example. EFER.NX=0), so we need to switch them atomically during guest entry or exit. Add a facility to program the vmx msr autoload registers accordingly. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
vmx and svm vcpus have different contents and therefore may have different alignmment requirements. Let each specify its required alignment. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Using is_last_spte() to cleanup invlpg code Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Move unsync/sync tracepoints to the proper place, it's good for us to obtain unsync page live time Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Convert mmu tracepoints by using DECLARE_EVENT_CLASS Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
If the guest is 32-bit, we should use 'quadrant' to adjust gpa offset Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gui Jianfeng 提交于
kvm_mmu_remove_one_alloc_mmu_page() assumes kvm_mmu_zap_page() only reclaims only one sp, but that's not the case. This will cause mmu shrinker returns a wrong number. This patch fix the counting error. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Eric Northup 提交于
For TDP mode, avoid creating multiple page table roots for the single guest-to-host physical address map by fixing the inputs used for the shadow page table hash in mmu_alloc_roots(). Signed-off-by: NEric Northup <digitaleric@google.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 17 5月, 2010 27 次提交
-
-
由 Gui Jianfeng 提交于
sp->unsync is bool now, so update trace event declaration. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch prevents MCE intercepts from being propagated into the L1 guest if they happened in an L2 guest. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds logic to kvm/x86 which allows to mark an injected exception as reinjected. This allows to remove an ugly hack from svm_complete_interrupts that prevented exceptions from being reinjected at all in the nested case. The hack was necessary because an reinjected exception into the nested guest could cause a nested vmexit emulation. But reinjected exceptions must not intercept. The downside of the hack is that a exception that in injected could get lost. This patch fixes the problem and puts the code for it into generic x86 files because. Nested-VMX will likely have the same problem and could reuse the code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements the reporting of the emulated SVM features to userspace instead of the real hardware capabilities. Every real hardware capability needs emulation in nested svm so the old behavior was broken. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the get_supported_cpuid callback to kvm_x86_ops. It will be used in do_cpuid_ent to delegate the decission about some supported cpuid bits to the architecture modules. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements propagation of a failes guest vmrun back into the guest instead of killing the whole guest. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch syncs cr0 and cr3 from the vmcb to the kvm state before nested intercept handling is done. This allows to simplify the vmexit path. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch fixes a bug where a nested guest always went over the same instruction because the rip was not advanced on a nested vmexit. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
The patch introducing nested nmi handling had a bug. The check does not belong to enable_nmi_window but must be in nmi_allowed. This patch fixes this. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
Fix bug of the exception path, free allocated vpid when fail to create vcpu. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Wei Yongjun 提交于
Since gfn is not changed in the for loop, we do not need to call gfn_to_memslot_unaliased() under the loop, and it is safe to move it out. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gui Jianfeng 提交于
Nobody use gva_to_page() anymore, get rid of it. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gui Jianfeng 提交于
Remove unused varialbe in rmap_next() Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gui Jianfeng 提交于
Make use of is_large_pte() instead of checking PT_PAGE_SIZE_MASK bit directly. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gui Jianfeng 提交于
Move first pte address calculation out of loop to save some cycles. Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Since commit bf47a760, we no longer handle ptes with the global bit set specially, so there is no reason to distinguish between shadow pages created with cr4.gpe set and clear. Such tracking is expensive when the guest toggles cr4.pge, so drop it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Lai Jiangshan 提交于
The RCU/SRCU API have already changed for proving RCU usage. I got the following dmesg when PROVE_RCU=y because we used incorrect API. This patch coverts rcu_deference() to srcu_dereference() or family API. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by qemu-system-x86/8550: #0: (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm] #1: (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm] stack backtrace: Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27 Call Trace: [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm] [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm] [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm] [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm] [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel] [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm] [<ffffffff810a8692>] ? unlock_page+0x27/0x2c [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm] [<ffffffff81060cfa>] ? up_read+0x23/0x3d [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a [<ffffffff810021db>] system_call_fastpath+0x16/0x1b Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Xiao Guangrong 提交于
Quote from Avi: |Just change the assignment to a 'goto restart;' please, |I don't like playing with list_for_each internals. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
If kvm_task_switch() fails code exits to userspace without specifying exit reason, so the previous exit reason is reused by userspace. Fix this by specifying exit reason correctly. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
'vcpu' is unused, remove it Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Define 'multimapped' as 'bool'. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Xiao Guangrong 提交于
Remove 'struct kvm_unsync_walk' since it's not used. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
emulator_task_switch() should return -1 for failure and 0 for success to the caller, just like x86_emulate_insn() does. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
There is no real distinction between glevels=3 and glevels=4; both have exactly the same format and the code is treated exactly the same way. Drop role.glevels and replace is with role.cr4_pae (which is meaningful). This simplifies the code a bit. As a side effect, it allows sharing shadow page tables between pae and longmode guest page tables at the same guest page. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
When a fault triggers a task switch, the error code, if existent, has to be pushed on the new task's stack. Implement the missing bits. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
Stop the switch immediately if task_switch_16/32 returned an error. Only if that step succeeded, the switch should actually take place and update any register states. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
We can call kvm_mmu_pte_write() directly from emulator_cmpxchg_emulated() instead of passing mmu_only down to emulator_write_emulated_onepage() and call it there. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-