Make hda_nid_t tables static const, as they are not intended to be
modified by callees.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/5150c94101c9534f4c8e987324f6912c16d459f6.1578043216.git.mirq-linux@rere.qmqm.plSigned-off-by: NTakashi Iwai <tiwai@suse.de>

The recent change to shuffle the codec initialization procedure for
Realtek via commit 607ca3bd ("ALSA: hda/realtek - EAPD turn on
later") caused the silent output on some machines.  This change was
supposed to be safe, but it isn't actually; some devices have quirk
setups to override the EAPD via COEF or BTL in the additional verb
table, which is applied at the beginning of snd_hda_gen_init().  And
this EAPD setup is again overridden in alc_auto_init_amp().

For recovering from the regression, tell snd_hda_gen_init() not to
apply the verbs there by a new flag, then apply the verbs in
alc_init().

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727
Fixes: 607ca3bd ("ALSA: hda/realtek - EAPD turn on later")
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.

Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.

To fix the above issue, free 'spec' before returning the error.

Fixes: 352f7f91 ("ALSA: hda - Merge Realtek parser code to generic parser")
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Based on 1 normalized pattern(s):

  this driver is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this driver is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  59 temple place suite 330 boston ma 02111 1307 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 18 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.186505395@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now all relevant platform drivers are providing the LED audio trigger,
we can switch the mute LED control with the LED trigger, finally.

For the mic-mute LED trigger, a common fixup function,
snd_hda_gen_fixup_micmute_led(), is provided to be called for the
corresponding quirk entries.  This sets up the capture sync hook with
ledtrig_audio_set() call appropriately.

For the mute LED trigger, which is done currently only for
thinkpad_acpi, the call is replaced with ledtrig_audio_set() as well.

Overall, the beauty of the new implementation is that the whole ugly
bindings with request_symbol() are dropped, and also that it provides
more flexibility to users.

One potential behavior change by this patch is that the mute LED enum
may be created on machines that actually have no LED device.  In the
former code, we did test-call and abort binding if the test failed.
But with the LED-trigger binding, this test isn't possible, and the
actual check is done in the LED class device side.  So it's the
downside of simpleness.

Also, note that the HD-audio codec driver doesn't select CONFIG_LEDS
and co by itself.  It's supposed to be selected by the platform
drivers instead.
Acked-by: NJacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.

Let's unify and replace with the latter one consistently.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of refusing, allow the configuration with the multiple ADCs
(thus multiple capture switches) for enabling the mic mute LED.
This has been done for Sigmatel/IDT codecs, and we treat the OR-ed
values from all capture switches as the boolean condition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the code for setting up and controlling the mic mute LED hook
from dell-wmi helper to the generic parser, so that it can be referred
from the multiple driver codes.

No functional change.
Tested-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element.  It slightly improves the readability than
lengthy open codes at each place.

Along with it, add const prefix to some obvious places.

There should be no functional changes by this.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If snd_hda_get_conn_list() fails then "conn" isn't initialized.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".

Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.

Fixes: 3a65bcdc ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The generic parser is the only user of the bind-mixer controls, so we
can move the code there and clean up the core helper.
Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Another preliminary patch for the dual-codec support: since the
support of vmaster over multiple codecs is difficult, simply disable
it by a new flag to hda_codec struct.  A new user hint is added as
well for consistency.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a preliminary patch for a smooth multi-codec support, and it
introduces a new flag, force_pin_prefix, to struct hda_codec.
This flag is used to force to add the pin location prefix to each
input pin.  For example, when there is only one microphone pin,
usually the auto-parser assigns the string "Mic".  With this flag on,
it'll be like "Front Mic".  Also, the creation of "Master" or "PCM"
playback volume for a single pin is suppressed, too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195305Signed-off-by: NTakashi Iwai <tiwai@suse.de>

UBSAN reports the following warning from accessing path->path[-1]
in set_path_power():

[   16.078040] ================================================================================
[   16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17
[   16.078198] index -1 is out of range for type 'hda_nid_t [10]'
[   16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47
[   16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012
[   16.078278]  ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032
[   16.078286]  ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d
[   16.078294]  ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292
[   16.078302] Call Trace:
[   16.078311]  [<ffffffff815c4fe3>] dump_stack+0x86/0xd3
[   16.078317]  [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40
[   16.078324]  [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70
[   16.078335]  [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic]
[   16.078344]  [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic]
[   16.078352]  [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic]
[   16.078360]  [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic]
[   16.078370]  [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic]
[   16.078376]  [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0
[   16.078390]  [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek]
[   16.078402]  [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek]
[   16.078417]  [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec]
[   16.078424]  [<ffffffff817bbac1>] driver_probe_device+0x101/0x380
[   16.078430]  [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100
[   16.078438]  [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380
[   16.078444]  [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0
[   16.078449]  [<ffffffff817bb087>] driver_attach+0x27/0x50
[   16.078454]  [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0
[   16.078460]  [<ffffffffa0369000>] ? 0xffffffffa0369000
[   16.078465]  [<ffffffff817bd13d>] driver_register+0x7d/0x130
[   16.078477]  [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec]
[   16.078488]  [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek]
[   16.078493]  [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0
[   16.078499]  [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80
[   16.078504]  [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560
[   16.078510]  [<ffffffff812bb314>] ? do_init_module+0x28/0x273
[   16.078515]  [<ffffffff812bb387>] do_init_module+0x9b/0x273
[   16.078522]  [<ffffffff811e3782>] load_module+0x20b2/0x3410
[   16.078527]  [<ffffffff811df140>] ? m_show+0x210/0x210
[   16.078533]  [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0
[   16.078541]  [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0
[   16.078547]  [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10
[   16.078552]  [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd
[   16.078556] ================================================================================

Fix by checking path->depth before use.
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far, we enabled the loopback mixing control as default, as this
behavior made somewhat compatible with the earlier HD-audio drivers
for Realtek & co.  However, it's getting annoying as we've got more
and more bug reports about the noise coming from the loopback route.
Since the loopback mixing is used fairly rarely and often harmful
(e.g. using PA), let's get rid of the default turn-on lines.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We've got a regression report that the recording on Mac with a cirrus
codec doesn't work any longer.  This turned out to be the missing
power up to D0 by power_save_node enablement.

After analyzing the traces, we found out that the culprit is that the
codec advertises the "actual" power state of a few nodes to be D0
while the "target" power state is D3.  This inconsistency is usually
OK, as it implies the power transition.  But in the case of cirrus
codec, this seems to be stuck to D3 while it's not actually D0.

This patch addresses the issue by checking the power state difference
more strictly.  It sends the power-state change verb unless both the
target and the actual power states show the given value.

We may introduce yet another flag indicating the possible broken
hardware power state, but it's anyway safer to set the proper power
state even in a transition (at least it's harmless as long as the
target state is same).  So this simpler change was applied now.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The calls for capture_hook were missing in dyn_adc_capture_pcm_prepare
and cleanup callbacks.  Luckily there are no users of the capture
hooks with dyn-adc PCM, so far, thus this doesn't change the behavior
of existing devices, but it's a fix for a future usage.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The hda_jack_tbl entries are managed by snd_array for allowing
multiple jacks.  It's good per se, but the problem is that struct
hda_jack_callback keeps the hda_jack_tbl pointer.  Since snd_array
doesn't preserve each pointer at resizing the array, we can't keep the
original pointer but have to deduce the pointer at each time via
snd_array_entry() instead.  Actually, this resulted in the deference
to the wrong pointer on codecs that have many pins such as CS4208.

This patch replaces the pointer to the NID value as the search key.
As an unexpected good side effect, this even simplifies the code, as
only NID is needed in most cases.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Many codecs, typically found on Realtek codecs, have the analog
loopback path merged to the secondary input of the middle of the
output paths.  Currently, we don't offer the dynamic switching in such
configuration but let each loopback path mute by itself.

This should work well in theory, but in reality, we often see that
such a dead loopback path causes some background noises even if all
the elements get muted.  Such a problem has been fixed by adding the
quirk accordingly to disable aamix, and it's the right fix, per se.
The only problem is that it's not so trivial to achieve it; user needs
to pass a hint string via patch module option or sysfs.

This patch gives a bit improvement on the situation: it adds "Loopback
Mixing" control element for such codecs like other codecs (e.g. IDT or
VIA codecs) with the individual loopback paths.  User can turn on/off
the loopback path simply via a mixer app.

For keeping the compatibility, the loopback is still enabled on these
codecs.  But user can try to turn it off if experiencing a suspicious
background or click noise on the fly, then build a static fixup later
once after the problem is addressed.

Other than the addition of the loopback enable/disablement control,
there should be no changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

An exported function snd_hda_parse_nid_path() is used only inside
hda_generic.c.  Let's make it a static local function for a better
code optimization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

An exported helper function snd_hda_get_nid_path() is nowhere used.
Let's remove it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Finally we have a proper infrastructure to generate the modaliases
automatically, let's move to hda_device_id from the legacy
hda_codec_preset that contains basically the same information.

The patch function hook is stored in driver_data field, which is long,
and we need an explicit cast.  Other than that, the conversion is
mostly straightforward.  Each entry is even simplified using a macro,
and the lengthy (and error-prone) manual modaliases got removed.

As a result, we achieved a quite good diet:
 14 files changed, 407 insertions(+), 595 deletions(-)
Reviewed-by: NVinod Koul <vinod.koul@intel.com>
Tested-by: NSubhransu S Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The widget power-saving code tries to turn up/down the power of each
widget in the I/O paths that are modified at each jack plug/unplug.
The recent report revealed that the power activation leaves some
widgets unpowered after plugging.  This is because
snd_hda_activate_path() turns on path->active flag at the end of the
function while the path power management is done before that.  Then
it's regarded as if nothing is active, and the driver turns off the
power.

The fix is simply to set the flag at the beginning of the function,
before trying to power up.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521
Cc: <stable@vger.kernel.org> [v4.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The is_active_nid_for_any() function in the generic parser is supposed
to check all connections from/to the given widget, but the current
code checks only the first input connection (index = 0).

This patch corrects the code to check all inputs by passing -1 to
index argument.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521
Cc: <stable@vger.kernel.org> [v4.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently, the alt PCM open callback returns -EBUSY when an
independent HP is turned off, supposing that it conflicts with the
main PCM.  However, obviously, this check is wrong when the
independent HP itself isn't enabled but the alt PCM was explicitly
created via alc_dac_nid by a codec driver.
Reported-and-tested-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This allows user to test power_save_node feature via sysfs or patch
firmware even on the codecs that don't specify it.  It'll also save a
few lines.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The widget (node) power-saves restore the widget states at each
transition from D3 to D0 on each node.  This was added in the commit
[d545a57c:ALSA: hda - Sync node attributes at resume from widget
power saving].  However, the test was rater false-positive; this
wasn't needed for any codecs.

Since the resync may take significant number of additional verbs to be
executed, it's better to reduce it.  Let's disable it for now again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell XPS13 produces a click noise at boot up, and Gabriele spotted out
that it's triggered by the initial pin control of the mic (NID 0x19).
This has to be set to Hi-Z Vref while the driver initializes to Vref
80% as a normal mic.

This patch fixes the generic parser code not to override the target
vref if it has been already set by the driver, and adds a proper
initialization of the target vref for this pin in the Realtek driver
side.
Reported-and-tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently the generic parser sets codec->power_filter when
power_save_node flag is set.  But this overrides the existing filter
that has been already set by the codec driver, thus it looses some
features.  Instead, set the default power_filter only when it's not
set yet.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the check of power_save_node flag at the beginning of the function
so that it skips the rest if the flag isn't set.  In this way, we can
call this function safely no matter whether the widget power-saving is
really used or not.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the widget power-saving is enabled, the first automute hook
invocation checks through the whole pins and it also tries to
synchronize the power state.  However, this results in a wrong state
because it calls unconditionally snd_hda_jack_detect_state().
This patch adds a check of jack detectability before the actual jack
detection call.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The new widget power-saving tries to apply the power change no matter
whether the node has a power cap or not.  It's bad (although most of
codecs chip just ignore it).  Check the capability properly
beforehand.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far we assumed that the node attributes like amp values remain
during the power state transition of the node itself.  While this is
true for IDT/STAC codecs I've tested, but some other codecs don't seem
behaving in that way.

This patch implements a partial sync mechanism specific to the given
widget node.  Now we've merged the regmap support, and it can be
easily written with regcache_sync_region().
Tested-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Like the previous patches, this patch converts also to the regmap, at
this time, the cached verb writes are the target.  But this conversion
needs a bit more caution than before.

- In the old code, we just record any verbs as is, and restore them at
  resume.  For the regmap scheme, this doesn't work, since a few verbs
  like AMP or DIGI_CONVERT are asymmetrical.  Such verbs are converted
  either to the dedicated function (snd_hda_regmap_xxx_amp()) or
  changed to the unified verb.

- Some verbs have to be declared as vendor-specific ones before
  accessing via regmap.

Also, the minor optimization with codec->cached_write flag is dropped
in a few places, as this would confuse the operation.  Further
optimizations will be brought in the later patches, if any.

This conversion ends up with a drop of significant amount of codes,
mostly the helper codes that are no longer used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now some codes and functionalities of hda_codec struct are moved to
hdac_device struct.  A few basic attributes like the codec address,
vendor ID number, FG numbers, etc are moved to hdac_device, and they
are accessed like codec->core.addr.  The basic verb exec functions are
moved, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>