Nikolay Aleksandrov says:

====================
bonding: extend the 3ad exported attributes

These are two small patches that export actor_oper_port_state and
partner_oper_port_state via netlink and sysfs, until now they were only
exported via bond's proc entry. If this set gets accepted I have an iproute2
patch prepared that will export them with which I tested these changes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export the partner_oper_port_state of each port via sysfs and netlink.
In 802.3ad mode it is valuable for the user to be able to check the
partner_oper state, it is already exported via bond's proc entry.
Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export the actor_oper_port_state of each port via sysfs and netlink.
In 802.3ad mode it is valuable for the user to be able to check the
actor_oper state, it is already exported via bond's proc entry.
Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
rocker: revert back to support for nowait processes

One of the items removed from the rocker driver in the Spring Cleanup patch
series was the ability to mark processing in the driver as "no wait" for
those contexts where we cannot sleep.  Turns out, we have "no wait"
contexts where we want to program the device and we don't want to defer the
processing to a process context.  So re-add the ROCKER_OP_FLAG_NOWAIT flag
to mark such processes, and propagate flags to mem allocator and to the
device cmd executor.  With NOWAIT, mem allocs are GFP_ATOMIC and device
cmds are queued to the device, but the driver will not wait (sleep) for the
response back from the device.

My bad for removing NOWAIT support in the first place; I thought we could
swing non-sleep contexts to process context using a work queue, for
example, but there is push-back to keep processing in original context.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rocker_port_stop can be called from atomic and non-atomic contexts.  Since
we can't test what context we're getting called in, do the processing as
'no wait', which will cover all cases.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can get STP updates from the bridge driver in atomic and non-atomic
contexts.  Since we can't test what context we're getting called in,
do the STP processing as 'no wait', which will cover all cases.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neigh update event handler runs in a context where we can't sleep, so mark
processing in driver with ROCKER_OP_FLAG_NOWAIT.  NOWAIT will use
GFP_ATOMIC for allocations and will queue cmds to the device's cmd ring but
will not wait (sleep) for cmd response back from device.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One of the items removed from the rocker driver in the Spring Cleanup patch
series was the ability to mark processing in the driver as "no wait" for
those contexts where we cannot sleep.  Turns out, we have "no wait"
contexts where we want to program the device.  So re-add the
ROCKER_OP_FLAG_NOWAIT flag to mark such processes, and propagate flags to
mem allocator and to the device cmd executor.  With NOWAIT, mem allocs are
GFP_ATOMIC and device cmds are queued to the device, but the driver will
not wait (sleep) for the response back from the device.

My bad for removing NOWAIT support in the first place; I thought we could
swing non-sleep contexts to process context using a work queue, for
example, but there is push-back to keep processing in original context.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rocker->neigh_tbl_next_index is used to generate unique indices for neigh
entries programmed into the device.  The way new indices were generated was
racy with the new prepare-commit transaction model.  A simple fix here
removes the race.  The race was with two processes getting the same index,
one process using prepare-commit, the other not:

Proc A					Proc B

PREPARE phase
get neigh_tbl_next_index

					NONE phase
					get neigh_tbl_next_index
					neigh_tbl_next_index++

COMMIT phase
neigh_tbl_next_index++

Both A and B got the same index.  The fix is to store and increment
neigh_tbl_next_index in the PREPARE (or NONE) phase and use value in COMMIT
phase:

Proc A					Proc B

PREPARE phase
get neigh_tbl_next_index
neigh_tbl_next_index++

					NONE phase
					get neigh_tbl_next_index
					neigh_tbl_next_index++

COMMIT phase
// use value stashed in PREPARE phase
Reported-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ports array is filled in as ports are probed, but if probing doesn't
finish, we need to stop only those ports that where probed successfully.
Check the ports array for NULL to skip un-probed ports when stopping.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using a function instead of a macro is cleaner and remove
following W=1 warnings (extract)

In file included from net/ipv6/ip6_vti.c:29:0:
net/ipv6/ip6_vti.c: In function ‘vti6_dev_init_gen’:
include/linux/netdevice.h:2029:18: warning: variable ‘stat’ set but not
used [-Wunused-but-set-variable]
    typeof(type) *stat;   \
                  ^
net/ipv6/ip6_vti.c:862:16: note: in expansion of macro
‘netdev_alloc_pcpu_stats’
  dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
                ^
  CC [M]  net/ipv6/sit.o
In file included from net/ipv6/sit.c:30:0:
net/ipv6/sit.c: In function ‘ipip6_tunnel_init’:
include/linux/netdevice.h:2029:18: warning: variable ‘stat’ set but not
used [-Wunused-but-set-variable]
    typeof(type) *stat;   \
                  ^
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

v2:

Move struct switchdev_obj automatics to inner scope where there used.

v1:

To maintain backward compatibility with the existing iproute2 "bridge vlan"
command, let bridge's setlink/dellink handler call into either the port
driver's 8021q ndo ops or the port driver's bridge_setlink/dellink ops.

This allows port driver to choose 8021q ops or the newer
bridge_setlink/dellink ops when implementing VLAN add/del filtering on the
device.  The iproute "bridge vlan" command does not need to be modified.

To summarize using the "bridge vlan" command examples, we have:

1) bridge vlan add|del vid VID dev DEV

Here iproute2 sets MASTER flag.  Bridge's bridge_setlink/dellink is called.
Vlan is set on bridge for port.  If port driver implements ndo 8021q ops,
call those to port driver can install vlan filter on device.  Otherwise, if
port driver implements bridge_setlink/dellink ops, call those to install
vlan filter to device.  This option only works if port is bridged.

2) bridge vlan add|del vid VID dev DEV master

Same as 1)

3) bridge vlan add|del vid VID dev DEV self

Bridge's bridge_setlink/dellink isn't called.  Port driver's
bridge_setlink/dellink is called, if implemented.  This option works if
port is bridged or not.  If port is not bridged, a VLAN can still be
added/deleted to device filter using this variant.

4) bridge vlan add|del vid VID dev DEV master self

This is a combination of 1) and 3), but will only work if port is bridged.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
v1->v2: switched to init_user_ns from current_user_ns as suggested by Andy

Introduce new helpers to access 'struct task_struct'->pid, tgid, uid, gid, comm
fields in tracing and networking.

Share bpf_trace_printk() and bpf_get_smp_processor_id() helpers between
tracing and networking.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's useful to do per-cpu histograms.
Suggested-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bpf_trace_printk() is a helper function used to debug eBPF programs.
Let socket and TC programs use it as well.
Note, it's DEBUG ONLY helper. If it's used in the program,
the kernel will print warning banner to make sure users don't use
it in production.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

eBPF programs attached to kprobes need to filter based on
current->pid, uid and other fields, so introduce helper functions:

u64 bpf_get_current_pid_tgid(void)
Return: current->tgid << 32 | current->pid

u64 bpf_get_current_uid_gid(void)
Return: current_gid << 32 | current_uid

bpf_get_current_comm(char *buf, int size_of_buf)
stores current->comm into buf

They can be used from the programs attached to TC as well to classify packets
based on current task fields.

Update tracex2 example to print histogram of write syscalls for each process
instead of aggregated for all.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

This a bit large (and late) patchset that contains Netfilter updates for
net-next. Most relevantly br_netfilter fixes, ipset RCU support, removal of
x_tables percpu ruleset copy and rework of the nf_tables netdev support. More
specifically, they are:

1) Warn the user when there is a better protocol conntracker available, from
   Marcelo Ricardo Leitner.

2) Fix forwarding of IPv6 fragmented traffic in br_netfilter, from Bernhard
   Thaler. This comes with several patches to prepare the change in first place.

3) Get rid of special mtu handling of PPPoE/VLAN frames for br_netfilter. This
   is not needed anymore since now we use the largest fragment size to
   refragment, from Florian Westphal.

4) Restore vlan tag when refragmenting in br_netfilter, also from Florian.

5) Get rid of the percpu ruleset copy in x_tables, from Florian. Plus another
   follow up patch to refine it from Eric Dumazet.

6) Several ipset cleanups, fixes and finally RCU support, from Jozsef Kadlecsik.

7) Get rid of parens in Netfilter Kconfig files.

8) Attach the net_device to the basechain as opposed to the initial per table
   approach in the nf_tables netdev family.

9) Subscribe to netdev events to detect the removal and registration of a
   device that is referenced by a basechain.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the net_device is gone, we have to unregister the hooks and put back
the reference on the net_device object. Once it comes back, register them
again. This also covers the device rename case.

This patch also adds a new flag to indicate that the basechain is disabled, so
their hooks are not registered. This flag is used by the netdev family to
handle the case where the net_device object is gone. Currently this flag is not
exposed to userspace.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This wrapper functions take care of hook registration for basechains.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The device is part of the hook configuration, so instead of a global
configuration per table, set it to each of the basechain that we create.

This patch reworks ebddf1a8 ("netfilter: nf_tables: allow to bind table to
net_device").

Note that this adds a dev_name field in the nft_base_chain structure which is
required the netdev notification subscription that follows up in a patch to
handle gone net_devices.
Suggested-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

After Florian patches, there is no need for XT_TABLE_INFO_SZ anymore :
Only one copy of table is kept, instead of one copy per cpu.

We also can avoid a dereference if we put table data right after
xt_table_info. It reduces register pressure and helps compiler.

Then, we attempt a kmalloc() if total size is under order-3 allocation,
to reduce TLB pressure, as in many cases, rules fit in 32 KB.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Jozsef Kadlecsik says:

====================
ipset patches for nf-next

Please consider to apply the next bunch of patches for ipset. First
comes the small changes, then the bugfixes and at the end the RCU
related patches.

* Use MSEC_PER_SEC consistently instead of the number.
* Use SET_WITH_*() helpers to test set extensions from Sergey Popovich.
* Check extensions attributes before getting extensions from Sergey Popovich.
* Permit CIDR equal to the host address CIDR in IPv6 from Sergey Popovich.
* Make sure we always return line number on batch in the case of error
  from Sergey Popovich.
* Check CIDR value only when attribute is given from Sergey Popovich.
* Fix cidr handling for hash:*net* types, reported by Jonathan Johnson.
* Fix parallel resizing and listing of the same set so that the original
  set is kept for the whole dumping.
* Make sure listing doesn't grab a set which is just being destroyed.
* Remove rbtree from ip_set_hash_netiface.c in order to introduce RCU.
* Replace rwlock_t with spinlock_t in "struct ip_set", change the locking
  in the core and simplifications in the timeout routines.
* Introduce RCU locking in bitmap:* types with a slight modification in the
  logic on how an element is added.
* Introduce RCU locking in hash:* types. This is the most complex part of
  the changes.
* Introduce RCU locking in list type where standard rculist is used.
* Fix coding styles reported by checkpatch.pl.
====================
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

According to the reporter, they are not needed.
Reported-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Fixes cross-compile to mips.
Signed-off-by: NKenneth Klette Jonassen <kennetkl@ifi.uio.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Standard rculist is used.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Three types of data need to be protected in the case of the hash types:

a. The hash buckets: standard rcu pointer operations are used.
b. The element blobs in the hash buckets are stored in an array and
   a bitmap is used for book-keeping to tell which elements in the array
   are used or free.
c. Networks per cidr values and the cidr values themselves are stored
   in fix sized arrays and need no protection. The values are modified
   in such an order that in the worst case an element testing is repeated
   once with the same cidr value.

The ipset hash approach uses arrays instead of lists and therefore is
incompatible with rhashtable.

Performance is tested by Jesper Dangaard Brouer:

Simple drop in FORWARD
~~~~~~~~~~~~~~~~~~~~~~

Dropping via simple iptables net-mask match::

 iptables -t raw -N simple || iptables -t raw -F simple
 iptables -t raw -I simple  -s 198.18.0.0/15 -j DROP
 iptables -t raw -D PREROUTING -j simple
 iptables -t raw -I PREROUTING -j simple

Drop performance in "raw": 11.3Mpps

Generator: sending 12.2Mpps (tx:12264083 pps)

Drop via original ipset in RAW table
~~~~~~~~~~~~~~~~~~~~~~~~~~~

Create a set with lots of elements::

 sudo ./ipset destroy test
 echo "create test hash:ip hashsize 65536" > test.set
 for x in `seq 0 255`; do
    for y in `seq 0 255`; do
        echo "add test 198.18.$x.$y" >> test.set
    done
 done
 sudo ./ipset restore < test.set

Dropping via ipset::

 iptables -t raw -F
 iptables -t raw -N net198 || iptables -t raw -F net198
 iptables -t raw -I net198 -m set --match-set test src -j DROP
 iptables -t raw -I PREROUTING -j net198

Drop performance in "raw" with ipset: 8Mpps

Perf report numbers ipset drop in "raw"::

 +   24.65%  ksoftirqd/1  [ip_set]           [k] ip_set_test
 -   21.42%  ksoftirqd/1  [kernel.kallsyms]  [k] _raw_read_lock_bh
    - _raw_read_lock_bh
       + 99.88% ip_set_test
 -   19.42%  ksoftirqd/1  [kernel.kallsyms]  [k] _raw_read_unlock_bh
    - _raw_read_unlock_bh
       + 99.72% ip_set_test
 +    4.31%  ksoftirqd/1  [ip_set_hash_ip]   [k] hash_ip4_kadt
 +    2.27%  ksoftirqd/1  [ixgbe]            [k] ixgbe_fetch_rx_buffer
 +    2.18%  ksoftirqd/1  [ip_tables]        [k] ipt_do_table
 +    1.81%  ksoftirqd/1  [ip_set_hash_ip]   [k] hash_ip4_test
 +    1.61%  ksoftirqd/1  [kernel.kallsyms]  [k] __netif_receive_skb_core
 +    1.44%  ksoftirqd/1  [kernel.kallsyms]  [k] build_skb
 +    1.42%  ksoftirqd/1  [kernel.kallsyms]  [k] ip_rcv
 +    1.36%  ksoftirqd/1  [kernel.kallsyms]  [k] __local_bh_enable_ip
 +    1.16%  ksoftirqd/1  [kernel.kallsyms]  [k] dev_gro_receive
 +    1.09%  ksoftirqd/1  [kernel.kallsyms]  [k] __rcu_read_unlock
 +    0.96%  ksoftirqd/1  [ixgbe]            [k] ixgbe_clean_rx_irq
 +    0.95%  ksoftirqd/1  [kernel.kallsyms]  [k] __netdev_alloc_frag
 +    0.88%  ksoftirqd/1  [kernel.kallsyms]  [k] kmem_cache_alloc
 +    0.87%  ksoftirqd/1  [xt_set]           [k] set_match_v3
 +    0.85%  ksoftirqd/1  [kernel.kallsyms]  [k] inet_gro_receive
 +    0.83%  ksoftirqd/1  [kernel.kallsyms]  [k] nf_iterate
 +    0.76%  ksoftirqd/1  [kernel.kallsyms]  [k] put_compound_page
 +    0.75%  ksoftirqd/1  [kernel.kallsyms]  [k] __rcu_read_lock

Drop via ipset in RAW table with RCU-locking
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

With RCU locking, the RW-lock is gone.

Drop performance in "raw" with ipset with RCU-locking: 11.3Mpps
Performance-tested-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

There's nothing much required because the bitmap types use atomic
bit operations. However the logic of adding elements slightly changed:
first the MAC address updated (which is not atomic), then the element
activated (added). The extensions may call kfree_rcu() therefore we
call rcu_barrier() at module removal.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Replace rwlock_t with spinlock_t in "struct ip_set" and change the locking
accordingly. Convert the comment extension into an rcu-avare object. Also,
simplify the timeout routines.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Remove rbtree in order to introduce RCU instead of rwlock in ipset
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

There was a small window when all sets are destroyed and a concurrent
listing of all sets could grab a set which is just being destroyed.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

When elements added to a hash:* type of set and resizing triggered,
parallel listing could start to list the original set (before resizing)
and "continue" with listing the new set. Fix it by references and
using the original hash table for listing. Therefore the destroying of
the original hash table may happen from the resizing or listing functions.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Commit "Simplify cidr handling for hash:*net* types" broke the cidr
handling for the hash:*net* types when the sets were used by the SET
target: entries with invalid cidr values were added to the sets.
Reported by Jonathan Johnson.

Testsuite entry is added to verify the fix.
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

There is no reason to check CIDR value regardless attribute
specifying CIDR is given.

Initialize cidr array in element structure on element structure
declaration to let more freedom to the compiler to optimize
initialization right before element structure is used.

Remove local variables cidr and cidr2 for netnet and netportnet
hashes as we do not use packed cidr value for such set types and
can store value directly in e.cidr[].
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Even if we return with generic IPSET_ERR_PROTOCOL it is good idea
to return line number if we called in batch mode.

Moreover we are not always exiting with IPSET_ERR_PROTOCOL. For
example hash:ip,port,net may return IPSET_ERR_HASH_RANGE_UNSUPPORTED
or IPSET_ERR_INVALID_CIDR.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Permit userspace to supply CIDR length equal to the host address CIDR
length in netlink message. Prohibit any other CIDR length for IPv6
variant of the set.

Also return -IPSET_ERR_HASH_RANGE_UNSUPPORTED instead of generic
-IPSET_ERR_PROTOCOL in IPv6 variant of hash:ip,port,net when
IPSET_ATTR_IP_TO attribute is given.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Make all extensions attributes checks within ip_set_get_extensions()
and reduce number of duplicated code.
Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Signed-off-by: NSergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>

Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>