We didn't free policy->related_cpus in error path err_unlock_policy.
This is catched by following kmemleak report:

unreferenced object 0xffff88022a0b96d0 (size 512):
  comm "modprobe", pid 886, jiffies 4294689177 (age 780.694s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8111ebe5>] create_object+0x186/0x281
    [<ffffffff814fad4f>] kmemleak_alloc+0x60/0xa7
    [<ffffffff8111127a>] kmem_cache_alloc_node_notrace+0x120/0x142
    [<ffffffff81262e4f>] alloc_cpumask_var_node+0x2c/0xd7
    [<ffffffff81262f0b>] alloc_cpumask_var+0x11/0x13
    [<ffffffff81262f1c>] zalloc_cpumask_var+0xf/0x11
    [<ffffffff8140fac0>] cpufreq_add_dev+0x11f/0x547
    [<ffffffff81334bda>] sysdev_driver_register+0xc2/0x11d
    [<ffffffff8140e334>] cpufreq_register_driver+0xcb/0x1b8
    [<ffffffffa032e040>] 0xffffffffa032e040
    [<ffffffff810021ba>] do_one_initcall+0x5e/0x15c
    [<ffffffff81087f94>] sys_init_module+0xa6/0x1e6
    [<ffffffff81009bc2>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NDave Jones <davej@redhat.com>

395913d0 ("[CPUFREQ] remove rwsem lock
from CPUFREQ_GOV_STOP call (second call site)") is not needed, because
there is no rwsem lock in cpufreq_ondemand and cpufreq_conservative
anymore.  Lock should not be released until the work done.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=1594Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NDave Jones <davej@redhat.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM
  ACPI: create "processor.bm_check_disable" boot param
  ACPI: skip checking BM_STS if the BIOS doesn't ask for it
  ACPI: fix unused function warning
  ACPI: processor: fix processor_physically_present on UP
  ACPI video: fix string mismatch for Sony SR290 laptop
  ACPI battery: don't invoke power_supply_changed twice when battery is hot-added
  ACPI: handle systems which asynchoronously enable ACPI mode

This fixes the regression in 2.6.35-rcX where bluetooth network devices
would fail to be deleted from sysfs, causing their destruction and
recreation to fail.  In addition this fixes the mac80211_hwsim driver
where it would leave around sysfs files when the driver was removed.

This problem is discussed at
  https://bugzilla.kernel.org/show_bug.cgi?id=16257

The reason for the regression is that the network namespace support
added to sysfs expects and requires that network devices be put in
directories that can contain only network devices.

Today get_device_parent almost provides that guarantee for all class
devices, except for a specific exception when the parent of a class
devices is a class device.  It would be nice to simply remove that
arguably incorrect special case, but apparently the input devices depend
on it being there.  So I have only removed it for class devices with
network namespace support.  Which today are the network devices.

It has been suggested that a better fix would be to change the parent
device from a class device to a bus device, which in the case of the
bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth,
I can not see how we would avoid significant userspace breakage if we
were to make that change.

Adding an extra directory in the path to the device will also be
userspace visible but it is much less likely to break things.
Everything is still accessible from /sys/class (for example), and it
fixes two bugs.  Adding an extra directory fixes a 3 year old regression
introduced with the new sysfs layout that makes it impossible to rename
bnep0 network devices to names that conflict with hci device attributes
like hci_revsion.  Adding an additional directory removes the new
failure modes introduced by the network namespace code.

If it weren't for the regession in the renaming of network devices I
would figure out how to just make the sysfs code deal with this
configuration of devices.

In summary this patch fixes regressions by changing:
"/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0".
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reported-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

virtio ring was changed to return an error code on OOM,
but one caller was missed and still checks for vq->vring.num.
The fix is just to check for <0 error code.

Long term it might make sense to change goto add_head to
just return an error on oom instead, but let's apply
a minimal fix for 2.6.35.
Reported-by: NChris Mason <chris.mason@oracle.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Tested-by: NChris Mason <chris.mason@oracle.com>
Cc: stable@kernel.org # .34.x
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3fea6026 ("Input: twl40300-keypad - fix handling of "all
ground" rows") broke compilation as I managed to use non-existent
keycodes.
Reported-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 2a6b6976
(ACPI: Store NVS state even when entering suspend to RAM) caused the
ACPI suspend code save the NVS area during suspend and restore it
during resume unconditionally, although it is known that some systems
need to use acpi_sleep=s4_nonvs for hibernation to work.  To allow
the affected systems to avoid saving and restoring the NVS area
during suspend to RAM and resume, introduce kernel command line
option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its
alias temporarily (add acpi_sleep=s4_nonvs to the feature removal
file).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 .
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Ntomas m <tmezzadra@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  vmlinux.lds: fix .data..init_task output section (fix popwerpc boot)
  powerpc: Fix erroneous lmb->memblock conversions
  powerpc/mm: Add some debug output when hash insertion fails
  powerpc/mm: Fix bugs in huge page hashing
  powerpc/mm: Move around testing of _PAGE_PRESENT in hash code
  powerpc/mm: Handle hypervisor pte insert failure in __hash_page_huge
  powerpc/kexec: Fix boundary case for book-e kexec memory limits

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  nconfig: Fix segfault when help contains special characters
  kbuild: Fix make rpm
  kbuild: Make the setlocalversion script POSIX-compliant

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available
  perf annotate: Fix handling of goto labels that are valid hex numbers
  tracing: Properly align linker defined symbols
  perf symbols: Fix directory descriptor leaking
  perf: Fix various display bugs with parent filtering

nconfig segfaults when help text contains the character '%'. For a quick
example, navigate to the kernel compression options and get the help for
bzip2. Doing so triggers a call to mvwprintw() with a string containing
'%' and no extra arguments to fill in the specifier's value. Fix this
case by printing the literal string retrieved from the kconfig.

 #0  0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6
 #1  0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6
 #2  0x00002b52b623991b in _nc_printf_string () from
 /lib/libncursesw.so.5
 #3  0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5
 #4  0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5
 #5  0x00000000004151d8 in fill_window (win=0x21b64c0,
     text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and
     speed is intermediate.\nDecompression speed is slowest among the
     three.  The kernel\nsize is about 10% smaller with bzip2, in
     comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:229
 #6  0x0000000000416335 in show_scroll_win (main_window=0x21a5630,
         title=0x157fa30 "Bzip2",
 	    text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression
 	    ratio and speed is intermediate.\nDecompression speed is
 	    slowest among the three.  The kernel\nsize is about 10%
 	    smaller with bzip2, in comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:535
 #7  0x00000000004055b2 in show_help (menu=0x157f9d0)
         at scripts/kconfig/nconf.c:1257
 #8  0x0000000000405897 in conf_choice (menu=0x157f130)
 	    at scripts/kconfig/nconf.c:1321
 #9  0x0000000000405326 in conf (menu=0x157d130) at
 	    scripts/kconfig/nconf.c:1208
 #10 0x00000000004052e8 in conf (menu=0xb434a0) at
 	    scripts/kconfig/nconf.c:1203
 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38)

Cc: Michal Marek <mmarek@suse.cz>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: NStephen Boyd <bebarino@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The .data..init_task output section was missing
a load offset causing a popwerpc target to fail to boot.

Sean MacLennan tracked it down to the definition of
INIT_TASK_DATA_SECTION().

There are only two users of INIT_TASK_DATA_SECTION()
in the kernel today: cris and popwerpc.
cris do not support relocatable kernels and is thus not
impacted by this change.

Fix INIT_TASK_DATA_SECTION() to specify load offset like
all other output sections.
Reported-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Oooops... we missed these. We incorrectly converted strings
used when parsing the device-tree on pseries, thus breaking
access to drconf memory and hotplug memory.

While at it, also revert some variable names that represent
something the FW calls "lmb" and thus don't need to be converted
to "memblock".
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
---

This adds some debug output to our MMU hash code to print out some
useful debug data if the hypervisor refuses the insertion (which
should normally never happen).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
---

There's a couple of nasty bugs lurking in our huge page hashing code.

First, we don't check the access permission atomically with setting
the _PAGE_BUSY bit, which means that the PTE value we end up using
for the hashing might be different than the one we have checked
the access permissions for.

We've seen cases where that leads us to try to use an invalidated
PTE for hashing, causing all sort of "interesting" issues.

Then, we also failed to set _PAGE_DIRTY on a write access.

Finally, a minor tweak but we should return 0 when we find the
PTE busy, in order to just re-execute the access, rather than 1
which means going to do_page_fault().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
---

Instead of adding _PAGE_PRESENT to the access permission mask
in each low level routine independently, we add it once from
hash_page().

We also move the preliminary access check (the racy one before
the PTE is locked) up so it applies to the huge page case. This
duplicates code in __hash_page_huge() which we'll remove in a
subsequent patch to fix a race in there.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If the hypervisor gives us an error on a hugepage insert we panic. The
normal page code already handles this by returning an error instead and we end
calling low_hash_fault which will just kill the task if possible.

The patch below does a similar thing for the hugepage case.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

processor.bm_check_disable=1" prevents Linux from checking BM_STS
before entering C3-type cpu power states.

This may be useful for a system running acpi_idle
where the BIOS exports FADT C-states, _CST IO C-states,
or _CST FFH C-states with the BM_STS bit set;
while configuring the chipset to set BM_STS
more frequently than perhaps is optimal.

Note that such systems may have been developed
using a tickful OS that would quickly clear BM_STS,
rather than a tickless OS that may go for some time
between checking and clearing BM_STS.

Note also that an alternative for newer systems
is to use the intel_idle driver, which always
ignores BM_STS, relying Linux device drivers
to register constraints explicitly via PM_QOS.

https://bugzilla.kernel.org/show_bug.cgi?id=15886Signed-off-by: NLen Brown <len.brown@intel.com>

It turns out that there is a bit in the _CST for Intel FFH C3
that tells the OS if we should be checking BM_STS or not.

Linux has been unconditionally checking BM_STS.
If the chip-set is configured to enable BM_STS,
it can retard or completely prevent entry into
deep C-states -- as illustrated by turbostat:

http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/

ref: Intel Processor Vendor-Specific ACPI Interface Specification
table 4 "_CST FFH GAS Field Encoding"
Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state

https://bugzilla.kernel.org/show_bug.cgi?id=15886Signed-off-by: NLen Brown <len.brown@intel.com>

make version 3.80 doesn't support "else ifdef" on the same line, also it
doesn't support unindented nested constructs.

Build fails with:
Makefile:608: Extraneous text after `else' directive
Makefile:611: *** only one `else' per conditional.  Stop.

This patch fixes the build for make 3.80.

Cc: Ingo Molnar <mingo@elte.hu>,
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1278430783-17259-1-git-send-email-conny.seidel@amd.com>
Signed-off-by: NConny Seidel <conny.seidel@amd.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - relax capability ID checks on newer hardware
  Input: twl40300-keypad - fix handling of "all ground" rows
  Input: gamecon - reference correct pad in gc_psx_command()
  Input: gamecon - reference correct input device in NES mode
  Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'
  Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
  Input: qt2160 - rename kconfig symbol name

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add quirk to make HP DV5000 laptop resume
  drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl
  Fix ttm_page_alloc.c build breakage
  drm/radeon/kms: fix legacy LVDS dpms sequence
  drm/radeon/kms: drop taking lock around crtc lookup.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: talitos - fix bug in sg_copy_end_to_buffer

Merge branch 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  x86: auditsyscall: fix fastpath return value after reschedule

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function
  debug_core,kdb: fix kgdb_connected bit set in the wrong place
  Fix merge regression from external kdb to upstream kdb
  repair gdbstub to match the gdbserial protocol specification
  kdb: break out of kdb_ll() when command is terminated

The KEXEC_*_MEMORY_LIMITs are inclusive addresses.  We define them as
2Gs as that is what we allow mapping via TLBs.  However, this should be
2G - 1 to be inclusive, otherwise if we have >2G of memory in a system
we fail to boot properly via kexec.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

When parsing the objdump disassembly output we can have goto labels that
are valid hex numbers and thus get confused with lines with machine
code.

Handle the common case of a label that has nothing after it and other
cases where there is just source code by validating the resulting "ip".

It is still possible that we find goto labels that are in the function
address range, but only if they are located before the real address we
should be OK.

A change in the objdump output to have a clear marker separating
addresses from the disassembly would come handy, but we would still have
to deal with older versions.
Reported-by: NGleb Natapov <gleb@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <20100722170541.GF17631@ghostprotocols.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

	# keyctl list 0x2a0ca6c3
	1 key in keyring:
	726766307: --alswrv     0     0 dns_resolver: foo.bar.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteve French <smfrench@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: NAndres Cimmarusti <acimmarusti@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Older firmwares fixed the middle byte of the Synaptics capabilities
query to 0x47, but starting with firmware 7.5 the middle byte
represents submodel ID, sometimes also called "dash number".
Reported-and-tested-by: NMiroslav Šulc <fordfrog@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls,
we can pass a bad return value and/or error indication for the
system call to audit_syscall_exit().  This happens when
TIF_NEED_RESCHED was set as the system call returned, so we went
out to schedule() and came back to the exit-audit fast-path.  The
fix is to reload the user return value register from the pt_regs
before using it for audit_syscall_exit().

Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit
system call fast paths work slightly differently, so that they
always leave the fast path entirely to reschedule and don't return
there, so they don't have the analogous bugs.
Reported-by: NAlexander Viro <aviro@redhat.com>
Signed-off-by: NRoland McGrath <roland@redhat.com>