1. Move calling ras block instance members from module internal
   function to the top calling xxx_ras_late_init.
2. Module internal function calls can only use parameter variables
   of xxx_ras_late_init instead of ras block instance members.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove redundant calls of ras_late_init in mca ras block.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove redundant calls of ras_late_init in mmhub ras block.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove redundant calls of ras_late_init in hdp ras block.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Modify .ras_late_init function pointer parameter so that
it can remove redundant intermediate calls in some ras blocks.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add 3.1.6 DCE IP and assign relevant sw DM function for the new DCE.
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add core DC implementation for DCN316.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NHansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize DMUB for DCN316. Use same funcs as DCN31 for
DCN316.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NPrike Liang <Prike.Liang@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- set DC version
- add construct/destroy dc clock management function
- register dcn interrupt handler
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NPrike Liang <Prike.Liang@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add register headers for the following IPs:
- DCN 3.1.6
- DPCS 4.2.3
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed to properly initialize GC 10.3.7.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize SDMA engine firmware loading.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set smu sw function and enable swSMU support for MP1.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set psp sw funcs callback and firmware loading for MP0.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set gfxhub function and configure VM for GC block.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

update vcn and jpeg power gating flags for VCN 3.1.1
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new revision ID for GC 10.3.7 and set
cg/pg flags.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set nv_common_ip_block for GC 10.3.7.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add SMUIO sw function for the new SMUIO block.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The message `Voltage value looks like a Leakage ID but it's not patched`
shows up as an error on Dell Precision 3540.  This doesn't cause functional
problems and should be downgraded to info.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1162Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add nbio sw func for the new 7.5.1 nbio block.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since this is an existing asic, adjust the code to follow
the same logic as previously so the driver state is consistent.

No functional change intended.
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even if PSR is allowed for a present GPU, there might be no eDP link
which supports PSR.

Fixes: 70897848 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled")
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMichel Dänzer <mdaenzer@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise gpu reset will be triggered unconditionally in poison
consumption.
Signed-off-by: NTao Zhou <tao.zhou1@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" for these cases. The older
style of one-element or zero-length arrays should no longer be used.
Reference:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arraysReported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NChangcheng Deng <deng.changcheng@zte.com.cn>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The previous change:
"Add affected crtcs to atomic state for dsc mst unplug"
forces modeset on all added crctc regardless whether timing changed or not.
Per our implementation of dsc we need modeset only if timing changed.
Otherwise dsc can be programmed incorrectly leading to dsc engine hang.

[How]
During atomic_check pre-compute dsc params.
Only set mode_changed if timing is changed.
Reviewed-by: NHersen Wu <hersenwu@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

if (!(tmp & flag)) condition will always evaluate to true
when the flag is 0x0 (AMDGPU_RLCG_GC_WRITE). Instead check
that address bits are cleared to determine whether
the command is complete.
Signed-off-by: NVictor Skvortsov <victor.skvortsov@amd.com>
Tested-by: NBokun Zhang <bokun.zhang@amd.com>
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
payload and slot number of display on dsc mst hub will be
adjusted when there is change on any display on dsc hub.
to monitor dsc enable/disable, pbn change, we need add log.

[How]
add mst_pbn to dc_dsc_config of dc_crtc_timing.
add dsc, pbn, display name within dc_core_enable_stream,
dc_core_disable_stream, dc_stream_log
Reviewed-by: NJerry Zuo <Jerry.Zuo@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NHersen Wu <hersenwu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following fixes:
-Fixes bugs for dsc mst hub
-Enables 29 denial itnerface by default
-Fixes dmub outbox notificatoin
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to
atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors"
However the original implementation may skip crtc if the topology change
caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after
unplug event on one of the connectors.

[How]
Update add_affected_mst_dsc_crtcs() to use old connector state
if new connector state has no crtc (undergoes modeset due to unplug)

Fixes: 44be939f ("drm/amd/display: Trigger modesets on MST DSC connectors")
Reviewed-by: NHersen Wu <hersenwu@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add the "harvest" field to the IP attributes in
the IP discovery sysfs visualization, as this
field is present in the binary data.

At the time of this commit, the harvest data isn't
consistently correct in VBIOS, but it is exposed
for completeness, in the hopes that VBIOS will be
fixed in the future.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
display mapping change will involved pipe power gating on and off.
when doing this too fase, sometimes usbc will have no display.
check HW status, it is still in pipe power gating.

[how]
insert polling HW status to make sure the required state reached.
also add dal registry key handling.
Reviewed-by: NSung joon Kim <Sungjoon.Kim@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NCharlene Liu <Charlene.Liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
when unplug 1 dp from dsc mst hub, atomic_check new request
dc_state only include info for the unplug dp. this will not
trigger re-compute pbn for displays still connected to hub.

[how] all displays connected to dsc hub are available in
dc->current_state, by comparing dc->current_state and new
request from atomic_chceck, it will provide info of
displays connected to hub and do pbn re-compute.
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NHersen Wu <hersenwu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Currently driver enables dmub outbox notification before oubox ISR is
registered. During boot scenario, sometimes dmub issues hpd outbox
message before driver registers ISR and those messages are missed.

[How]
Enable dmub outbox notification after outbox ISR is registered. Also,
restructured outbox enable code to call from dm layer and renamed APIs.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU
specific stability issues.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

MMHUB PG needs to be disabled for Picasso for stability reasons.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fulfill the implementations for DriverSmuConfig setting on Sienna_Cichlid.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>