Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.

With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e53 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Jason A. Donenfeld says:

====================
wireguard patches for 5.18-rc6

In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.

One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.

[1] https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
====================

Link: https://lore.kernel.org/r/20220504202920.72908-1-Jason@zx2c4.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.

Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

it/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-05-03

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The cited commits didn't use proper matching on inner TTC
as a result distribution of encapsulated packets wasn't symmetric
between the physical ports.

Fixes: 4c71ce50 ("net/mlx5: Support partial TTC rules")
Fixes: 8e25a2bc ("net/mlx5: Lag, add support to create TTC tables for LAG port selection")
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMaor Gottlieb <maorg@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Double clear of reset requested state can lead to NULL pointer as it
will try to delete the timer twice. This can happen for example on a
race between abort from FW and pci error or reset. Avoid such case using
test_and_clear_bit() to verify only one time reset requested state clear
flow. Similarly use test_and_set_bit() to verify only one time reset
requested state set flow.

Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event")
Signed-off-by: NMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: NMaher Sanalla <msanalla@nvidia.com>
Reviewed-by: NShay Drory <shayd@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The sync reset flow can lead to the following deadlock when
poll_sync_reset() is called by timer softirq and waiting on
del_timer_sync() for the same timer. Fix that by moving the part of the
flow that waits for the timer to reset_reload_work.

It fixes the following kernel Trace:
RIP: 0010:del_timer_sync+0x32/0x40
...
Call Trace:
 <IRQ>
 mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core]
 poll_sync_reset.cold+0x36/0x52 [mlx5_core]
 call_timer_fn+0x32/0x130
 __run_timers.part.0+0x180/0x280
 ? tick_sched_handle+0x33/0x60
 ? tick_sched_timer+0x3d/0x80
 ? ktime_get+0x3e/0xa0
 run_timer_softirq+0x2a/0x50
 __do_softirq+0xe1/0x2d6
 ? hrtimer_interrupt+0x136/0x220
 irq_exit+0xae/0xb0
 smp_apic_timer_interrupt+0x7b/0x140
 apic_timer_interrupt+0xf/0x20
 </IRQ>

Fixes: 3c5193a8 ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll")
Signed-off-by: NMoshe Shemesh <moshe@nvidia.com>
Reviewed-by: NMaher Sanalla <msanalla@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Setting dscp2prio during the driver reload can cause dcb ieee app list to
be not empty after the reload finish and as a result to a conflict between
the priority trust state reported by the app and the state in the device
register.

Reset the dcb ieee app list on initialization in case this is
conflicting with the register status.

Fixes: 2a5e7a13 ("net/mlx5e: Add dcbnl dscp to priority support")
Signed-off-by: NMoshe Tal <moshet@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

During TC action parsing, the can_offload callback is called
before calling the action's main parsing callback.

Later on, the can_offload callback is called again before handling
the action's post_parse callback if exists.

Since the main parsing callback might have changed and set parsing
params for the rule, following can_offload checks might fail because
some parsing params were already set.

Specifically, the ct action main parsing sets the ct param in the
parsing status structure and when the second can_offload for ct action
is called, before handling the ct post parsing, it will return an error
since it checks this ct param to indicate multiple ct actions which are
not supported.

Therefore, the can_offload call is removed from the post parsing
handling to prevent such cases.
This is allowed since the first can_offload call will ensure that the
action can be offloaded and the fact the code reached the post parsing
handling already means that the action can be offloaded.

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: NAriel Levkovich <lariel@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT,
if that is the last reference to that tuple, the actual deletion of
the tuple can happen after the FT is already destroyed and freed.

Flush the used workqueue before destroying the ct FT.

Fixes: a2173131 ("net/mlx5e: CT: manage the lifetime of the ct entry object")
Reviewed-by: NOz Shlomo <ozsh@nvidia.com>
Signed-off-by: NPaul Blakey <paulb@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When resolving the decap route device for a tunnel decap rule,
the result may be an OVS internal port device.

Prior to adding the support for internal port offload, such case
would result in using the uplink as the default decap route device
which allowed devices that can't support internal port offload
to offload this decap rule.

This behavior got broken by adding the internal port offload which
will fail in case the device can't support internal port offload.

To restore the old behavior, use the uplink device as the decap
route as before when internal port offload is not supported.

Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: NAriel Levkovich <lariel@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

ct_clear action is translated to clearing reg_c metadata
which holds ct state and zone information using mod header
actions.
These actions are allocated during the actions parsing, as
part of the flow attributes main mod header action list.

If ct action exists in the rule, the flow's main mod header
is used only in the post action table rule, after the ct tables
which set the ct info in the reg_c as part of the ct actions.

Therefore, if the original rule has a ct_clear action followed
by a ct action, the ct action reg_c setting will be done first and
will be followed by the ct_clear resetting reg_c and overwriting
the ct info.

Fix this by moving the ct_clear mod header actions allocation from
the ct action parsing stage to the ct action post parsing stage where
it is already known if ct_clear is followed by a ct action.
In such case, we skip the mod header actions allocation for the ct
clear since the ct action will write to reg_c anyway after clearing it.

Fixes: 806401c2 ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: NAriel Levkovich <lariel@nvidia.com>
Reviewed-by: NPaul Blakey <paulb@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Referenced change added check to skip updating fib when new fib instance
has same or lower priority. However, new fib instance can be an update on
same dst address as existing one even though the structure is another
instance that has different address. Ignoring events on such instances
causes multipath LAG state to not be correctly updated.

Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info
structure and don't skip events that have the same value of that fields.

Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Referenced change incorrectly sets single path fib_info even when LAG is
not active. Fix it by moving call to mlx5_lag_fib_set() into conditional
that verifies LAG state.

Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Recent commit that modified fib route event handler to handle events
according to their priority introduced use-after-free[0] in mp->mfi pointer
usage. The pointer now is not just cached in order to be compared to
following fib_info instances, but is also dereferenced to obtain
fib_priority. However, since mlx5 lag code doesn't hold the reference to
fin_info during whole mp->mfi lifetime, it could be used after fib_info
instance has already been freed be kernel infrastructure code.

Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*'
type and cache fib_info priority in dedicated integer. Group
fib_info-related data into dedicated 'fib' structure that will be further
extended by following patches in the series.

[0]:

[  203.588029] ==================================================================
[  203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138

[  203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G    B             5.17.0-rc7+ #6
[  203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core]
[  203.600053] Call Trace:
[  203.600608]  <TASK>
[  203.601110]  dump_stack_lvl+0x48/0x5e
[  203.601860]  print_address_description.constprop.0+0x1f/0x160
[  203.602950]  ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.604073]  ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.605177]  kasan_report.cold+0x83/0xdf
[  203.605969]  ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.607102]  mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.608199]  ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core]
[  203.609382]  ? read_word_at_a_time+0xe/0x20
[  203.610463]  ? strscpy+0xa0/0x2a0
[  203.611463]  process_one_work+0x722/0x1270
[  203.612344]  worker_thread+0x540/0x11e0
[  203.613136]  ? rescuer_thread+0xd50/0xd50
[  203.613949]  kthread+0x26e/0x300
[  203.614627]  ? kthread_complete_and_exit+0x20/0x20
[  203.615542]  ret_from_fork+0x1f/0x30
[  203.616273]  </TASK>

[  203.617174] Allocated by task 3746:
[  203.617874]  kasan_save_stack+0x1e/0x40
[  203.618644]  __kasan_kmalloc+0x81/0xa0
[  203.619394]  fib_create_info+0xb41/0x3c50
[  203.620213]  fib_table_insert+0x190/0x1ff0
[  203.621020]  fib_magic.isra.0+0x246/0x2e0
[  203.621803]  fib_add_ifaddr+0x19f/0x670
[  203.622563]  fib_inetaddr_event+0x13f/0x270
[  203.623377]  blocking_notifier_call_chain+0xd4/0x130
[  203.624355]  __inet_insert_ifa+0x641/0xb20
[  203.625185]  inet_rtm_newaddr+0xc3d/0x16a0
[  203.626009]  rtnetlink_rcv_msg+0x309/0x880
[  203.626826]  netlink_rcv_skb+0x11d/0x340
[  203.627626]  netlink_unicast+0x4cc/0x790
[  203.628430]  netlink_sendmsg+0x762/0xc00
[  203.629230]  sock_sendmsg+0xb2/0xe0
[  203.629955]  ____sys_sendmsg+0x58a/0x770
[  203.630756]  ___sys_sendmsg+0xd8/0x160
[  203.631523]  __sys_sendmsg+0xb7/0x140
[  203.632294]  do_syscall_64+0x35/0x80
[  203.633045]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  203.634427] Freed by task 0:
[  203.635063]  kasan_save_stack+0x1e/0x40
[  203.635844]  kasan_set_track+0x21/0x30
[  203.636618]  kasan_set_free_info+0x20/0x30
[  203.637450]  __kasan_slab_free+0xfc/0x140
[  203.638271]  kfree+0x94/0x3b0
[  203.638903]  rcu_core+0x5e4/0x1990
[  203.639640]  __do_softirq+0x1ba/0x5d3

[  203.640828] Last potentially related work creation:
[  203.641785]  kasan_save_stack+0x1e/0x40
[  203.642571]  __kasan_record_aux_stack+0x9f/0xb0
[  203.643478]  call_rcu+0x88/0x9c0
[  203.644178]  fib_release_info+0x539/0x750
[  203.644997]  fib_table_delete+0x659/0xb80
[  203.645809]  fib_magic.isra.0+0x1a3/0x2e0
[  203.646617]  fib_del_ifaddr+0x93f/0x1300
[  203.647415]  fib_inetaddr_event+0x9f/0x270
[  203.648251]  blocking_notifier_call_chain+0xd4/0x130
[  203.649225]  __inet_del_ifa+0x474/0xc10
[  203.650016]  devinet_ioctl+0x781/0x17f0
[  203.650788]  inet_ioctl+0x1ad/0x290
[  203.651533]  sock_do_ioctl+0xce/0x1c0
[  203.652315]  sock_ioctl+0x27b/0x4f0
[  203.653058]  __x64_sys_ioctl+0x124/0x190
[  203.653850]  do_syscall_64+0x35/0x80
[  203.654608]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  203.666952] The buggy address belongs to the object at ffff888144df2000
                which belongs to the cache kmalloc-256 of size 256
[  203.669250] The buggy address is located 80 bytes inside of
                256-byte region [ffff888144df2000, ffff888144df2100)
[  203.671332] The buggy address belongs to the page:
[  203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0
[  203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0
[  203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[  203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40
[  203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[  203.679928] page dumped because: kasan: bad access detected

[  203.681455] Memory state around the buggy address:
[  203.682421]  ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  203.683863]  ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  203.686701]                                                  ^
[  203.687820]  ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  203.689226]  ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  203.690620] ==================================================================

Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The arguments of update_buffer_lossy() is in a wrong order. Fix it.

Fixes: 88b3d5c9 ("net/mlx5e: Fix port buffers cell size value")
Signed-off-by: NMark Zhang <markzhang@nvidia.com>
Reviewed-by: NMaor Gottlieb <maorg@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently, match VLAN rule also matches packets that have multiple VLAN
headers. This behavior is similar to buggy flower classifier behavior that
has recently been fixed. Fix the issue by matching on
outer_second_cvlan_tag with value 0 which will cause the HW to verify the
packet doesn't contain second vlan header.

Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match")
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Resource dump menu may span over more than a single page, support it.
Otherwise, menu read may result in a memory access violation: reading
outside of the allocated page.
Note that page format of the first menu page contains menu headers while
the proceeding menu pages contain only records.

The KASAN logs are as follows:
BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0
Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496

CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G    B  5.16.0_for_upstream_debug_2022_01_10_23_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x57/0x7d
 print_address_description.constprop.0+0x1f/0x140
 ? strcmp+0x9b/0xb0
 ? strcmp+0x9b/0xb0
 kasan_report.cold+0x83/0xdf
 ? strcmp+0x9b/0xb0
 strcmp+0x9b/0xb0
 mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core]
 ? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core]
 ? lockdep_hardirqs_on_prepare+0x286/0x400
 ? raw_spin_unlock_irqrestore+0x47/0x50
 ? aomic_notifier_chain_register+0x32/0x40
 mlx5_load+0x104/0x2e0 [mlx5_core]
 mlx5_init_one+0x41b/0x610 [mlx5_core]
 ....
The buggy address belongs to the object at ffff88812b2e0000
 which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 4048 bytes to the right of
 4096-byte region [ffff88812b2e0000, ffff88812b2e1000)
The buggy address belongs to the page:
page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0
head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040
raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                                 ^
 ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 12206b17 ("net/mlx5: Add support for resource dump")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NMoshe Shemesh <moshe@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When OVS internal port is the vtep device, the first decap
rule is matching on the internal port's vport metadata value
and then changes the metadata to be the uplink's value.

Therefore, following rules on the tunnel, in chain > 0, should
avoid matching on internal port metadata and use the uplink
vport metadata instead.

Select the uplink's metadata value for the source vport match
in case the rule is in chain greater than zero, even if the tunnel
route device is internal port.

Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port")
Signed-off-by: NAriel Levkovich <lariel@nvidia.com>
Reviewed-by: NMaor Dickman <maord@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Michael Chan says:

====================
bnxt_en: Bug fixes

This patch series includes 3 fixes:
 - Fix an occasional VF open failure.
 - Fix a PTP spinlock usage before initialization
 - Fix unnecesary RX packet drops under high TX traffic load.
====================

Link: https://lore.kernel.org/r/1651540392-2260-1-git-send-email-michael.chan@broadcom.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

In bnxt_poll_p5(), we first check cpr->has_more_work.  If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling.  It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.

We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget.  This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path.  Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left.  We will then exit
NAPI and stay in polling mode.

Fixes: 389a877a ("bnxt_en: Process the NQ under NAPI continuous polling.")
Reviewed-by: NAndy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock
spinlock.  The spinlock is not initialized until later.  Move the
bnxt_ptp_init_rtc() call after the spinlock is initialized.

Fixes: 24ac1ecd ("bnxt_en: Add driver support to use Real Time Counter for PTP")
Reviewed-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: NSaravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: NAndy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: NDamodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

bnxt_open() can fail in this code path, especially on a VF when
it fails to reserve default rings:

bnxt_open()
  __bnxt_open_nic()
    bnxt_clear_int_mode()
    bnxt_init_dflt_ring_mode()

RX rings would be set to 0 when we hit this error path.

It is possible for a subsequent bnxt_open() call to potentially succeed
with a code path like this:

bnxt_open()
  bnxt_hwrm_if_change()
    bnxt_fw_init_one()
      bnxt_fw_init_one_p3()
        bnxt_set_dflt_rfs()
          bnxt_rfs_capable()
            bnxt_hwrm_reserve_rings()

On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1.  But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.

Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.

We fix this in 2 places.  bnxt_rfs_capable() will always return false if
RX rings is not yet set.  bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.

Fixes: 20d7d1c5 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash")
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa7 ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource.  This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...

When merging this to the stable kernels, make sure you also merge commit
e330b9a6 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...

Fixes: 965b2aa7 ("net/smsc911x: fix irq resource allocation failure")
Signed-off-by: NSergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ruSigned-off-by: NJakub Kicinski <kuba@kernel.org>

As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.

This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.

Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: NMatthew Hagan <mnhagan88@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

syzbot is reporting use-after-free read in tcp_retransmit_timer() [1],
for TCP socket used by RDS is accessing sock_net() without acquiring a
refcount on net namespace. Since TCP's retransmission can happen after
a process which created net namespace terminated, we need to explicitly
acquire a refcount.

Link: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed [1]
Reported-by: Nsyzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com>
Fixes: 26abe143 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a681736 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Nsyzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/a5fb1fc4-2284-3359-f6a0-e4e390239d7b@I-love.SAKURA.ne.jpSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 04080634 ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.

This patch fixes the help text.

Fixes: 04080634 ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NCarlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.deSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.

Fixes: 04080634 ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NCarlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.deSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.

When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.

Fix this by taking br1 down and bringing it back up when it is fully
configured.

With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).

Fixes: 239e754a ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: NIdo Schimmel <idosch@nvidia.com>
Reviewed-by: NPetr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

Radhey Shyam Pandey says:

====================
emaclite: improve error handling and minor cleanup

This patchset does error handling for of_address_to_resource() and also
removes "Don't advertise 1000BASE-T" and auto negotiation.

Changes for v3:
- Resolve git apply conflicts for 2/2 patch.

Changes for v2:
- Added Andrew's reviewed by tag in 1/2 patch.
- Move ret to down to align with reverse xmas tree style in 2/2 patch.
- Also add fixes tag in 2/2 patch.
- Specify tree name in subject prefix.
====================

Link: https://lore.kernel.org/r/1651476470-23904-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: NPaolo Abeni <pabeni@redhat.com>

check the return value of of_address_to_resource() and also add
missing of_node_put() for np and npp nodes.

Fixes: e0a3bc65 ("net: emaclite: Support multiple phys connected to one MDIO bus")
Addresses-Coverity: Event check_return value.
Signed-off-by: NShravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>

In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: NShravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: NRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>