Modify freesync module to build VTEM infopackets when in HdmiVRR mode
Signed-off-by: NBayan Zabihiyan <Bayan.Zabihiyan@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
On DCN1, there is an issue where on high BW config on single channel
systems, underflow will be observed if DCC is disabled. This issue
can be observed on several use cases. For this particular case,
it is observed when playing 4k video on 4k desktop with video downscaled
to a certain size.

[How]
Block MPO for this particular case, this will prevent extra BW consumed
from downscaling, working around the underflow.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DP compliance box shows wrong MSA data.
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Hotplug on raven results in REG_WAIT_TIMEOUT warning
due to failing attempt to lock disabled otg for the hubp
interdependent pipes programming.

[How]
Don't setup pipe interdependencies for disabled otg.
Also removed the unnecessary duplicate logic checks.
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY] clarify dal input parameters to pplib interface, remove
un-used parameters. dal knows exactly which parameters needed
and their effects at pplib and smu sides.

current dal sequence for dcn1_update_clock to pplib:

1.smu10_display_clock_voltage_request for dcefclk
2.smu10_display_clock_voltage_request for fclk
3.phm_store_dal_configuration_data {
   set_min_deep_sleep_dcfclk
   set_active_display_count
   store_cc6_data --- this data never be referenced

new sequence will be:

1. set_display_count  --- need add new pplib interface
2. set_min_deep_sleep_dcfclk -- new pplib interface
3. set_hard_min_dcfclk_by_freq
4. set_hard_min_fclk_by_freq

after this code refactor, smu10_display_clock_voltage_request,
phm_store_dal_configuration_data will not be needed for rv.
Signed-off-by: Nhersen wu <hersenxs.wu@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It is huge, unmaintainable, needlessly layered, and obsolete

[How]
Remove it.  All of it.  Also remove the i2caux struct in
dc_context and the code that created and destructed it
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The aux_engine struct is needlessly complex and
is defined multiple times.  It contains function pointers
that each have only one version and are called only from
inside dce_aux.

[How]
Replace aux_engine with a new struct called dce_aux.
Remove all function pointers and call functions directly.
Remove unused functions
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The old aux interface goes through i2caux and the aux_engine
and engine function pointers.  The multiple layers of indirection
make it hard to tell waht is happening.  The aux algorithm
does not need to be this complicated: attempt to submit the
request.  If you get an ack (reply = 0), stop.  Otherwise,
retry, up to 7 times.

[How]
Add a new helper function in dce_aux that performs aux retries

Move the plumbing of the aux calling code into dce_aux

Add functions in ddc that redirect directly to dce_aux

Make all aux calls use these functions
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
aux_payload should be the struct used inside dc to start
aux transactions.  This will allow the old aux interface
to be seamlessly replaced.

[How]
Add three fields to aux_payload: reply, mot, defer_delay
This will mean that aux_payload has all data required
to submit a request.  Shift dc_link to use this struct
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSteven Chiu <steven.chiu@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The cursor vanishes when touching the top of edge of the screen for
Raven on Linux.

This occurs because the cursor height is not taken into account when
deciding to disable the cursor.

[How]
Factor in the cursor height into the cursor calculations - and mimic
the existing x position calculations.

Fixes: 94a4ffd1 ("drm/amd/display: fix PIP bugs on Dal3")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If eDP ver >= 1.4,
the Source device must use LINK_RATE_SET.

[How]
Get LINK_RATE_SET by reading DPCD 10h-1fh,
then write DPCD 00115h before link training.
Signed-off-by: NDerek Lai <Derek.Lai@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In certain scenarios the ramp parameter come in as NULL, which crashes
because this function doesn't guard properly in the early return.

[How]
- parameter mapUserRamp should be the guard (false means no ramp)
- remove checking ramp in early return
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NSivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Acked-by: NEryk Brol <Eryk.Brol@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
To resume system before entering S0i3 completely will cause PSP not
reload DMCU FW since there is not HW power state change.
In this case, driver cannot get correct DMCU version from IRAM
since driver override it and DMCU didn't reload to update it.
It makes driver return false in dcn10_dmcu_init().

[how]
1.To redefine DMCU_SCRATCH to identify different DMCU state.
2.To reserve IRAM 0xF0~0xFF write by DMCU only.
3.To remove dcn10_get_dmcu_state
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PPLIB not receive the PME when unplug.
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
separate register access from logic to allow us abstract register sequences

[how]
consolidate mask and value first then apply to register.
Signed-off-by: NTony Cheng <tony.cheng@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 717276b9.

The reverted patch was a workaround that addressed an issue fixed by:
4364bcb2 ("drm: Get ref on CRTC commit object when waiting for
flip_done")
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
1-Test equipment does not reset test automation flag after completing
current test causing the next test to fail.
2.When test request is empty, we shouldn't ack the test.

[How]
1-Driver should always clear test equipment automation test request
when request is completed.
2-Driver should clear test equipement test automation if driver does
not complete the request.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When the DMCU's iRAM definition was moved to the newly created
power_helpers, a #pragma pack was lost, causing the iRAM to be misaligned

[How]
Restore the #pragma pack
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The driver will crash on dce hardware due to a null function pointer.

[How]
- bring back "program_csc_matrix" functionality as "program_output_csc" for
dce110
- dce110 doesn't use the "opp_id" parameter, so use 0 when there's no hubp
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSteven Chiu <steven.chiu@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This fixes a stuttering issue that occurs when moving a hardware cursor
when VRR is enabled.

Previously when VRR is enabled atomic check will grab the connector
state for every atomic update. This has to lock the connector in order
to do so. The locking is bad enough by itself for performance, but
it gets worse with what we do just below that - add all the planes
for the CRTC to the commit.

This prevents the cursor fast path from working - there's more than one
plane now. With state->allow_modeset = true on top of this, it also
adds and removes all the planes from the DC context triggering a full
(very slow) update in DC.

[How]
We need the connector state to get the VRR min/max capbilities, but we
only need them when there's a CRTC mode change or when VRR is toggled.

The condition has been updated accordingly.

Fixes: 3cc22f281318 ("drm/amdgpu: Set FreeSync state using drm VRR properties")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

acg btc was added to Vega12
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

dGPUs need their own topology devices. Don't assign them to APU topology
devices with CPU cores.

Bug: https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/issues/66Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Tested-by: NElias Konstantinidis <ekondis@gmail.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ifdef x86_64 specific code.
Allow enabling CONFIG_HSA_AMD on ARM64.

v2: Fixed a compiler warning due to an unused variable

CC: Mark Nutter <Mark.Nutter@arm.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Tested-by: NMark Nutter <Mark.Nutter@arm.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To deal with situations like kexec or GPU VM passthrough
where the device may have been used previously without a
proper GPU reset between.

v2: rebase

bug: https://bugs.freedesktop.org/show_bug.cgi?id=108585
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108754Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SOC15 chips require a reset if the driver was previously loaded
because the PSP can only be loaded once between each reset.

v2: rebase, handle multiple asic funcs
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VI chips require a reset if the driver was previously loaded
because the SMU can only be loaded once between each reset.

v2: rebase
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CIK chips require a reset if the driver was previously loaded
because the SMU can only be loaded once between each reset.

v2: rebase
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SI chips don't require a reset on reload due to the nature of
the SMU on them.

v2: rebase
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used to determine if we need to reset the asic on init due
to the driver having been previously loaded or not shutdown
cleanly.  E.g., kexec or VM passthrough.

v2: rebase
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Expose sclk (gfx clock) and mclk (memory clock) via
hwmon compatible interface.  hwmon does not actually
formally specify a frequency type attribute, but these
are compatible with the format of the other attributes
exposed via hwmon.  Units are hertz.

freq1_input - GPU gfx/compute clock in hertz
freq2_input - GPU memory clock in hertz (dGPU only)
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a sysfs file that reports the number of bytes transmitted and
received in the last second. This can be used to approximate the PCIe
bandwidth usage over the last second.

v2: Clarify use of mps as estimation of bandwidth
v3: Don't make the file on APUs
v4: Early exit for APUs in the read function, change output to
    display "packets-received packets-sent mps"
v5: fix missing header for si (Alex)
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need these offsets for PCIE perf counters, so include them as well as
the the previously-used defines from the nbio_*.c files

v2: Return NBIF definitions back to previous files
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: Move locks around in other functions so that this
function can stand on its own.  Also only hold the hive
specific lock for add/remove device instead of the driver
global lock so you can't add/remove devices in parallel from
one hive.

v3: add reset_lock

Acked-by:  Shaoyun.liu < Shaoyun.liu@amd.com>
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To reduce indent in dm_update_crtcs, and to make it operate on single
instances.

[How]
Move iteration of plane states into atomic_check.
No functional change is intended.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To reduce indentation of dm_update_planes, and to make it operate on
single plane instances.

[How]
Move iteration of plane states into atomic_check.
No functional change is intended.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add message print out and return -EINVAL when driver can not get valid hive
from hive  arrary on xgmi configuration
Signed-off-by: Nshaoyunl <shaoyun.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

get_fw_type and prep_cmd_buf should be common interface
instead of IP specific ones
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>