- 28 7月, 2009 3 次提交
-
-
由 Dhananjay Phadke 提交于
Initialize and configure interrupt coalesing defaults in the firmware, so that these also reflect in "ethool -c". Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
NX3031 hardware requires local IP addresses for packet accumulation (LRO). IP address hashing is required to distinguish a local TCP flow from others (forwarded or guest). This patch adds listener for IP and netdev events and configures IP address in the firmware. Signed-off-by: NAmit Kumar Salecha <amit@netxen.com> Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
o move dma mask update to netxen_start_firmware() so that if firmware changes across suspend (e.g. file -> flash) it reflects right dma mask. o re-read firmware capabilities after firmware reset. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 7月, 2009 17 次提交
-
-
由 Eric Dumazet 提交于
[PATCH net-next-2.6] bnx2: Update vlan_features In order to get full use of some advanced features of BNX2, we now need to fill dev->vlan_features. Patch successfully tested with vlan devices built on top of bonding. (bond0 : one bnx2 slave, one tg3 slave (not yet vlan_features enabled) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tomas Winkler 提交于
1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Patrick said : "vlan_features doesn't need to be updated, the resulting dev->features of the VLAN device is computed as the intersection of dev->features and dev->vlan_features." Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike McCormack 提交于
Signed-off-by: NMike McCormack <mikem@ring3k.org> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change resolves some warnings seen with DMA debugging enabled in which we were mapping skb->data with size + NET_IP_ALIGN and unmapping it with just size. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The igb driver is currently initializing the mailbox function pointers after the phy. This causes issues as the phy init will return from the function early if there is no phy present. To resolve this I have moved the function pointer init to a location prior to the phy initialization so that serdes based adapters can also make use of SR-IOV. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch cleans up the flow control configuration for igb to make it a bit more readable in regards to what the requested and current modes are. This should help with the maintainability of the current igb driver in regards to flow control. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that we use buffer_info->dma instead of shinfo->nr_frags to determine if we need to unmap a received skb. By doing this we can avoid a cache miss on small packets since the buffer_info structure should already be prefetched. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch adds support for a new 82576 mezzanine adapter. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
There is a switch statement in igb_set_wol that defaults to break and doesn't actually do anything. As such it should be removed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This update cleans up the receive address register initialization. The main purpose of this is to clean out some redundancy that was introduced due to having multiple ways of setting the receive address registers. Instead of having a specialized function to set one register and one to set all of them it makes more sense to just go through the list calling the function that is needed to set the individual registers. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves all of the multicast addresses out of the free Receive address registers and instead programs them all into the multicast table array. As a result the multicast filtering may not be as precise, but it also greatly reduces the overhead for multicast addresses. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The 82575 and 82576 hardware can both experience data corruption issues if a pci-e completion arrives after the timeout value. In order to avoid this we need to increase the timeout value while pci-e master is disabled. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The igb driver was overwritting the LED settings that were configured via EEPROM. This is not correct behavior as the LED settings are meant to be configured by EEPROM and not changed. This change removes the code that was setting the LED behavior on the interface. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Since igb_configure_pcs_link always returns 0 there isn't really much point to checking for the result so it is best just to change this to a void so we can properly ignore the return result. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
There was a serdes power down workaround that was originally added for 82576 fiber. However it has also been found that this workaround is needed for serdes connections as well. In addition it is also needed for 82575 serdes so we we need to remove the checks restricting it to 82576. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The current igb driver only supports copper and serdes. The fiber media type is a holdover from earlier NICs as the current nics supported by igb all use serdes when communicating over a fiber connection. As a result we can remove media type fiber without losing any functionality. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 7月, 2009 20 次提交
-
-
由 Luis R. Rodriguez 提交于
mac80211 drivers do not need to stop the software queues or call their own stop() callback upon suspend as we do it for drivers. Equally drivers don't have to call their own start() or start the queues as mac80211 will do it for us. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
mac80211 will have disabled the queues for us when needed. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
This Production Line Testing code is currently unused and can be removed. It can be reintroduced when nl80211 test mode implemented for the driver. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
Commit "wl1251: add wl1251 prefix to all 1251 files" accidentally added wl1251_netlink.c which contains a private netlink interface. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
The new values are taken from the recently open sourced Atheros HAL. Correctness is also confirmed by the users with access to Atheros documentation. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
The patch fixes a use-after-free bug for cmd->seq_num; Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
Avoid calling cfg80211_connect_result() in IBSS mode. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
cfg80211_connect_result() let us specify associate request and response IEs as parameters after we are connected. We use this capability instead of doing it ourselves with WEXT. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In two places, variables are unnecessilarly initialized to NULL. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
Inverted logic Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
We have a dedicated function for this kind of checks, use that instead of duplicating the code. Changes-licensed-under: ISC Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gabor Juhos 提交于
If we are in NETWORK SLEEP state, AR_SLP32_TSF_WRITE_STATUS limit always exceeds in 'ath9k_hw_reset_tsf', because reading of the AR_SLP3 register always return with the magic 0xdeadbeef value. Changes-licensed-under: ISC Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stefan Weil 提交于
Changes (comments and debug output): * couldnt -> couldn't * frmware -> firmware * recevied -> received Signed-off-by: NStefan Weil <weil@mail.berlios.de> Acked-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Correia 提交于
Fix a bunch of spelling errors in the rt2x00 drivers Signed-off-by: NLuis Correia <luis.f.correia@gmail.com> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
iwl_enable_interrupts is being called inside the interrupt, change from function call to inline Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
rfkill state changes are mostly available through debug messages. These are significant enough to always make user aware of so we turn them into warnings. Also insert a missing newline in some rfkill related debug message. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
When a hardware error is detected we need to be clear about that and not create impression that the microcode is able to deal with it. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
* Deprecate the "debug50" module parameter used to obtain 5000 series and up debugging. Replace it with "debug" module parameter to match with original driver and be consistent between them. The "debug50" module parameter can still be used, except that the module parameter is not writable in keeping with its previous state. We currently just mark it as "deprecated" and do not have it in the feature-removal-schedule. Some more cleanup of module parameters needs to be done and can then be entered together. * Only make "debug" module parameters visible if the driver is compiled with CONFIG_IWLWIFI_DEBUG. This will eliminate a lot of confusion where users think they have set debug flags but yet cannot see any debug output. * Make module parameters writable. This eliminates the need for the "debug_level" sysfs file, which can now also be deprecated and added to feature-removal-schedule. This file is in significant use though with many iwlwifi documents and text referring users to it. We can thus not take its removal lightly and keep it around. With iwlcore shared between iwlagn and iwl3945 we really do not need debug module parameters for each but can instead have one debug module parameter for the iwlcore module. The same issue is here as with the sysfs file - a lot of iwlwifi documentation and text (like bug reports) rely on iwlagn and iwl3945 having this module parameter, so changing this to a module parameter of iwlcore will have significant impact and we do not do this for that reason. One consequence of this patch is that if a user is running a system with both 3945 and later hardware then the setting of the one module parameter will affect the value of the other. The likelihood of this seems low - and even if this setup is present it does not seem like an issue for both modules to run with the same debug level. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Wait for REPLY_ALIVE notification from init and runtime uCode. based on the type of REPLY_ALIVE, different status bit will be set to wake up the queue: STATUS_INIT_UCODE_ALIVE for init uCode STATUS_RT_UCODE_ALIVE for runtime uCode. If timeout, attempt to download the failing uCode image again. This can only be done for the init ucode images of all iwlagn devices and the runtime ucode image of the 5000 series and up. If there is a problem with the 4965 runtime ucode coming up we restart the interface and thus trigger a new download of the init ucode also. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jay Sternberg 提交于
firmware file now contains build number so API needs to be updated. Signed-off-by: NJay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-