Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[V2: rebased to apply to 20120905 staging-next, no other changes]

This slightly modified ramster codebase is now built entirely on zcache2
and all ramster-specific code is fully contained in a subdirectory.

Ramster extends zcache2 to allow pages compressed via zcache2 to be
"load-balanced" across machines in a cluster.  Control and data communication
is done via kernel sockets, and cluster configuration and management is
heavily leveraged from the ocfs2 cluster filesystem.

There are no new features since the codebase introduced into staging at 3.4.
Some cleanup was performed though:
 1) Interfaces directly with new zbud
 2) Debugfs now used instead of sysfs where possible.  Sysfs still
    used where necessary for userland cluster configuration.

Ramster is very much a work-in-progress but also does really work!

RAMSTER HIGH LEVEL OVERVIEW (from original V5 posting in Feb 2012)

RAMster implements peer-to-peer transcendent memory, allowing a "cluster" of
kernels to dynamically pool their RAM so that a RAM-hungry workload on one
machine can temporarily and transparently utilize RAM on another machine which
is presumably idle or running a non-RAM-hungry workload.  Other than the
already-merged cleancache patchset and frontswap patchset, no core kernel
changes are currently required.

(Note that, unlike previous public descriptions of RAMster, this implementation
does NOT require synchronous "gets" or core networking changes. As of V5,
it also co-exists with ocfs2.)

RAMster combines a clustering and messaging foundation based on the ocfs2
cluster layer with the in-kernel compression implementation of zcache2, and
adds code to glue them together.  When a page is "put" to RAMster, it is
compressed and stored locally.  Periodically, a thread will "remotify" these
pages by sending them via messages to a remote machine.  When the page is
later needed as indicated by a page fault, a "get" is issued.  If the data
is local, it is uncompressed and the fault is resolved.  If the data is
remote, a message is sent to fetch the data and the faulting thread sleeps;
when the data arrives, the thread awakens, the data is decompressed and
the fault is resolved.

As of V5, clusters up to eight nodes are supported; each node can remotify
pages to one specified node, so clusters can be configured as clients to
a "memory server".  Some simple policy is in place that will need to be
refined over time.  Larger clusters and fault-resistant protocols can also
be added over time.

A HOW-TO is available at:
http://oss.oracle.com/projects/tmem/dist/files/RAMster/HOWTO-120817Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[V2: rebased to apply to 20120905 staging-next, no other changes]

The original zcache in staging is a "demo" version, and this is a massive
rewrite.  This was intended to result in a merged zcache and ramster, but
that option has been blocked so, to continue forward progress on ramster
and future related projects, only ramster moves to the new codebase.
To differentiate between the old demo zcache and the rewrite, we refer
to the latter as zcache2, config'd as CONFIG_ZCACHE2.  Zcache and zcache2
cannot be built in the same kernel, so CONFIG_ZCACHE2 implies !CONFIG_ZCACHE.

This developer still has hope that zcache and zcache2 will be merged
into one codebase.  Until then, zcache2 can be considered a one-node
version of ramster.

No history of changes was recorded during the zcache2 rewrite and recreating
a sane one would be a Sisyphean task but, since ramster is still in
staging and has been unchanged since it was merged, presumably this
is acceptable.

This commit also provides the hooks in zcache2 for ramster, but all
ramster-specific code is provided in a separate commit.

Some of the highlights of this rewritten codebase for zcache2:
(Note: If you are not familiar with the tmem terminology, you can review
it here: http://lwn.net/Articles/454795/ )
 1. Merge of "demo" zcache and the v1.1 version of zcache in ramster.  Zcache
    and ramster had a great deal of duplicate code which is now merged.
    In essence, zcache2 *is* ramster but with no remote machine available,
    but !CONFIG_RAMSTER will avoid compiling lots of ramster-specific code.
 2. Allocator.  Previously, persistent pools used zsmalloc and ephemeral pools
    used zbud.  Now a completely rewritten zbud is used for both.  Notably
    this zbud maintains all persistent (frontswap) and ephemeral (cleancache)
    pageframes in separate queues in LRU order.
 3. Interaction with page allocator.  Zbud does no page allocation/freeing,
    it is done entirely in zcache2 where it can be tracked more effectively.
 4. Better pre-allocation.  Previously, on put, if a new pageframe could not be
    pre-allocated, the put would fail, even if the allocator had plenty of
    partial pages where the data could be stored; this is now fixed.
 5. Ouroboros ("eating its own tail") allocation.  If no pageframe can be
    allocated AND no partial pages are available, the least-recently-used
    ephemeral pageframe is reclaimed immediately (including flushing tmem
    pointers to it) and re-used.  This ensures that most-recently-used
    cleancache pages are more likely to be retained than LRU pages and also
    that, as in the core mm subsystem, anonymous pages have a higher priority
    than clean page cache pages.
 6. Zcache and zbud now use debugfs instead of sysfs.  Ramster uses debugfs
    where possible and sysfs where necessary.  (Some ramster configuration
    is done from userspace so some sysfs is necessary.)
 7. Modularization.  As some have observed, the monolithic zcache-main.c code
    included zbud code, which has now been separated into its own code module.
    Much ramster-specific code in the old ramster zcache-main.c has also been
    moved into ramster.c so that it does not get compiled with !CONFIG_RAMSTER.
 8. Rebased to 3.5.

This new codebase also provides hooks for several future new features:
 A. WasActive patch, requires some mm/frontswap changes previously posted.
    A new version of this patch will be provided separately.
    See ifdef __PG_WAS_ACTIVE
 B. Exclusive gets.  It seems tmem _can_ support exclusive gets with a
    minor change to both zcache2 and a small backwards-compatible change
    to frontswap.c.  Explanation and frontswap patch will be provided
    separately.  See ifdef FRONTSWAP_HAS_EXCLUSIVE_GETS
 C. Ouroboros writeback.  Since persistent (frontswap) pages may now also be
    reclaimed in LRU order, the foundation is in place to properly writeback
    these pages back into the swap cache and then the swap disk.  This is still
    under development and requires some other mm changes which are prototyped.
    See ifdef FRONTSWAP_HAS_UNUSE.

A new feature that desperately needs attention (if someone is looking for
a way to contribute) is kernel module support.  A preliminary version of
a patch was posted by Erlangen University and needs to be integrated and
tested for zcache2 and brought up to kernel standards.

If anybody is interested on helping out with any of these, let me know!
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[V2: rebased to apply to 20120905 staging-next, no other changes]

To prep for moving the ramster codebase on top of the new
redesigned zcache2 codebase, we remove ramster (as well
as its contained diverged v1.1 version of zcache) entirely.
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix spelling in tmem.c:
Transcedent -> Transcendent
Signed-off-by: NMarcus Karlsson <mk@acc.umu.se>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

we are dereferencing the pshmem , and the pci_alloc_consistent can fail
returning null,

do a memcpy if we have a valid pshmem
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

this function return void, means return at the end of this function
is not needed
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

the locked variable is used for checking whether the function
acquired lock, then unlock. actually with out this we
can achieve the same lock and unlock senario, remove the locked
variable and also cleanup the code around.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

we are returning -ENOENT when there is no firmware file for a matching
device id. then we start calling request_firmware,
after this we do checks on the firmware length of corresponding
device id, since the default case is handled in the begining itself
there is no need of a default case at the firmware length checks
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Caused by commit 187e4782 ("Staging: ipack: Read the ID space during
device registration").

drivers/staging/ipack/ipack.c: In function 'ipack_device_read_id':
drivers/staging/ipack/ipack.c:291:2: error: implicit declaration of function
	'ioread8' [-Werror=implicit-function-declaration]
drivers/staging/ipack/ipack.c:309:3: error: implicit declaration of function
	'ioread16be' [-Werror=implicit-function-declaration]
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the pointer to the PCI device from the private data `struct
das08_private_struct`.  Use `comedi_set_hw_dev()` to save a pointer to
the PCI device (actually, its embedded `struct device`) and
`comedi_to_pci_dev()` to retrieve it.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that this driver no longer supports "manual" attachment of PCI
devices in its `attach` hook (`das08_attach()`), it no longer has code
that searches for a suitable PCI device and increments its reference
count.  Since the driver no longer has any reason for incrementing and
decrementing the PCI device's reference count, the calls to
`pci_dev_get()` and `pci_dev_put()` can be removed.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi_amcc_S5920.c file only has the function i_AddiHeaderRW_ReadEeprom()
in it. The addi_amcc_S5920.h file has a prototype for this function and a
couple defines for the magic numbers used when accessing the eeprom.

The .c file is not actually built by any .config selection, or by an

The .h file is only #include'd by the hwdrv_apci3200.c file. That file
actually has a local version of the i_AddiHeaderRW_ReadEeprom() function
that is identical to the one in the .c file.

Just move the #define's from the .h file into hwdrv_apci3200.c and remove
the addi_amcc_S5920.[ch] files.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nothing in the comedi subsystem references this header file. It's
actually almost a straight copy of the addi_amcc_s5933.h file anyway.
Just remove the file.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Makefile for the comedi subsystem does not compile this file
for any .config selection. This file would allow building one big
driver to support all the addi-data cards.

The addi-data drivers are a big enough mess as-is. Just remove this
file.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Iam Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Also include it in the hotplug event so that udev can
provide the respective driver.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Devices are match based upon their vendor and device ids.  Since
the individual drivers provide a list of supported ids they do not
need to implement the matching themselves.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The modalias entries for the module are now created.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename them in the process.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Also expose the values through sysfs.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We keep a copy of the ID space for later use.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The modaliases look like ipack:fXvNdM, where X is the format version (8
bit) and N and M are the vendor and device ID represented as 32 bit
hexadecimal numbers each. Using 32 bits allows us to define IPACK_ANY_ID
as (~0) without interfering with the valid ids.

The resulting modalias string for ipoctal.ko looks like this (once
ipoctal provides a device table):
alias:          ipack:f01v000000F0d00000048*
alias:          ipack:f01v000000F0d0000002A*
alias:          ipack:f01v000000F0d00000022*
(output from modinfo)
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to have a struct when it has only one field.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Define memory address space, fix sparse warnings and mark the structs
reflecting hardware memory layout "packed" to be on the safe side.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

They are not used any longer.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

They are not used any longer.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Before it was using the functions in ipack_bus_ops.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

During initialization we configure the TPCI200 so it does not swap data
lanes on IndustryPack module access.  The read and write functions are
changed accordingly.

We are taking this approach in the hope that all IP Carriers are able to
present the Module memory layout unchanged.  We can thus directly access
the memory and registers of IP Modules without having to rely on the
read and write wrappers currently exposed in ipack_bus_opts.  A later
patch will convert the existing driver and remove the wrappers.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These changes make it easier to add more initialization steps later on.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

the kzalloc does allocates memory and sets the data at the memory
which is allocated to 0,

The driver does uses the kmalloc and memset at some points in the code
replace them with a single call to kzalloc
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Acked-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>