It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.

Cc: stable@vger.kernel.org # 5.11
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Provide a generic helper for setting up an io_uring worker. Returns a
task_struct so that the caller can do whatever setup is needed, then call
wake_up_new_task() to kick it into gear.

Add a kernel_clone_args member, io_thread, which tells copy_process() to
mark the task with PF_IO_WORKER.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Linked timeouts are fired asynchronously (i.e. soft-irq), and use
generic cancellation paths to do its stuff, including poking into io-wq.
The problem is that it's racy to access tctx->io_wq, as
io_uring_task_cancel() and others may be happening at this exact moment.
Mark linked timeouts with REQ_F_INLIFGHT for now, making sure there are
no timeouts before io-wq destraction.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of going into request internals, like checking req->file->f_op,
do match them based on REQ_F_INFLIGHT, it's set only when we want it to
be reliably cancelled.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we race on shutting down the io-wq, then we should ensure that any
work that was queued after workers shutdown is canceled. Harden the
add work check a bit too, checking for IO_WQ_BIT_EXIT and cancel if
it's set.

Add a WARN_ON() for having any work before we kill the io-wq context.

Reported-by: syzbot+91b4b56ead187d35c9d3@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Alex reports that his system fails to suspend using 5.12-rc1, with the
following dump:

[  240.650300] PM: suspend entry (deep)
[  240.650748] Filesystems sync: 0.000 seconds
[  240.725605] Freezing user space processes ...
[  260.739483] Freezing of tasks failed after 20.013 seconds (3 tasks refusing to freeze, wq_busy=0):
[  260.739497] task:iou-mgr-446     state:S stack:    0 pid:  516 ppid:   439 flags:0x00004224
[  260.739504] Call Trace:
[  260.739507]  ? sysvec_apic_timer_interrupt+0xb/0x81
[  260.739515]  ? pick_next_task_fair+0x197/0x1cde
[  260.739519]  ? sysvec_reschedule_ipi+0x2f/0x6a
[  260.739522]  ? asm_sysvec_reschedule_ipi+0x12/0x20
[  260.739525]  ? __schedule+0x57/0x6d6
[  260.739529]  ? del_timer_sync+0xb9/0x115
[  260.739533]  ? schedule+0x63/0xd5
[  260.739536]  ? schedule_timeout+0x219/0x356
[  260.739540]  ? __next_timer_interrupt+0xf1/0xf1
[  260.739544]  ? io_wq_manager+0x73/0xb1
[  260.739549]  ? io_wq_create+0x262/0x262
[  260.739553]  ? ret_from_fork+0x22/0x30
[  260.739557] task:iou-mgr-517     state:S stack:    0 pid:  522 ppid:   439 flags:0x00004224
[  260.739561] Call Trace:
[  260.739563]  ? sysvec_apic_timer_interrupt+0xb/0x81
[  260.739566]  ? pick_next_task_fair+0x16f/0x1cde
[  260.739569]  ? sysvec_apic_timer_interrupt+0xb/0x81
[  260.739571]  ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[  260.739574]  ? __schedule+0x5b7/0x6d6
[  260.739578]  ? del_timer_sync+0x70/0x115
[  260.739581]  ? schedule_timeout+0x211/0x356
[  260.739585]  ? __next_timer_interrupt+0xf1/0xf1
[  260.739588]  ? io_wq_check_workers+0x15/0x11f
[  260.739592]  ? io_wq_manager+0x69/0xb1
[  260.739596]  ? io_wq_create+0x262/0x262
[  260.739600]  ? ret_from_fork+0x22/0x30
[  260.739603] task:iou-wrk-517     state:S stack:    0 pid:  523 ppid:   439 flags:0x00004224
[  260.739607] Call Trace:
[  260.739609]  ? __schedule+0x5b7/0x6d6
[  260.739614]  ? schedule+0x63/0xd5
[  260.739617]  ? schedule_timeout+0x219/0x356
[  260.739621]  ? __next_timer_interrupt+0xf1/0xf1
[  260.739624]  ? task_thread.isra.0+0x148/0x3af
[  260.739628]  ? task_thread_unbound+0xa/0xa
[  260.739632]  ? task_thread_bound+0x7/0x7
[  260.739636]  ? ret_from_fork+0x22/0x30
[  260.739647] OOM killer enabled.
[  260.739648] Restarting tasks ... done.
[  260.740077] PM: suspend exit

Play nice and ensure that any thread we create will call try_to_freeze()
at an opportune time so that memory suspend can proceed. For the io-wq
worker threads, mark them as PF_NOFREEZE. They could potentially be
blocked for a long time.
Reported-by: NAlex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: NAlex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_dismantle_req() is always followed by io_put_task(), which already do
proper in_idle wake ups, so we can skip waking the owner task in
io_dismantle_req(). The rules are simpler now, do io_put_task() shortly
after ending a request, and it will be fine.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

__io_queue_async_work() is only called from io_queue_async_work(),
inline it.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Inline io_req_clean_work(), less code and easier to analyse
tctx dependencies and refs usage.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When we cancel SQPOLL, @task in io_uring_try_cancel_requests() will
differ from current. Use the right tctx from passed in @task, and don't
forget that it can be NULL when the io_uring ctx exits.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We no longer revert the iovec on -EIOCBQUEUED, see commit ab2125df,
and this started causing issues for IOPOLL on devies that run out of
request slots. Turns out what outside of needing a revert for those, we
also had a bug where we didn't properly setup retry inside the submission
path. That could cause re-import of the iovec, if any, and that could lead
to spurious results if the application had those allocated on the stack.

Catch -EAGAIN retry and make the iovec stable for IOPOLL, just like we do
for !IOPOLL retries.

Cc: <stable@vger.kernel.org> # 5.9+
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Reported-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The 'err' path should include the hash put, we already grabbed a reference
once we get that far.

Fixes: e941894e ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now, sqo_task is used only for a warning that is not interesting anymore
since sqo_dead is gone, remove all of that including ctx->sqo_task.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

As SQPOLL task doesn't poke into ->sqo_task anymore, there is no need to
kill the sqo when the master task exits. Before it was necessary to
avoid races accessing sqo_task->files with removing them.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
[axboe: don't forget to enable SQPOLL before exit, if started disabled]
Signed-off-by: NJens Axboe <axboe@kernel.dk>

syzbot reports a deadlock, attempting to lock the same spinlock twice:

============================================
WARNING: possible recursive locking detected
5.11.0-syzkaller #0 Not tainted
--------------------------------------------
swapper/1/0 is trying to acquire lock:
ffff88801b2b1130 (&runtime->sleep){..-.}-{2:2}, at: spin_lock include/linux/spinlock.h:354 [inline]
ffff88801b2b1130 (&runtime->sleep){..-.}-{2:2}, at: io_poll_double_wake+0x25f/0x6a0 fs/io_uring.c:4960

but task is already holding lock:
ffff88801b2b3130 (&runtime->sleep){..-.}-{2:2}, at: __wake_up_common_lock+0xb4/0x130 kernel/sched/wait.c:137

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&runtime->sleep);
  lock(&runtime->sleep);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

2 locks held by swapper/1/0:
 #0: ffff888147474908 (&group->lock){..-.}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x9f/0xd0 sound/core/pcm_native.c:170
 #1: ffff88801b2b3130 (&runtime->sleep){..-.}-{2:2}, at: __wake_up_common_lock+0xb4/0x130 kernel/sched/wait.c:137

stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0xfa/0x151 lib/dump_stack.c:120
 print_deadlock_bug kernel/locking/lockdep.c:2829 [inline]
 check_deadlock kernel/locking/lockdep.c:2872 [inline]
 validate_chain kernel/locking/lockdep.c:3661 [inline]
 __lock_acquire.cold+0x14c/0x3b4 kernel/locking/lockdep.c:4900
 lock_acquire kernel/locking/lockdep.c:5510 [inline]
 lock_acquire+0x1ab/0x730 kernel/locking/lockdep.c:5475
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:354 [inline]
 io_poll_double_wake+0x25f/0x6a0 fs/io_uring.c:4960
 __wake_up_common+0x147/0x650 kernel/sched/wait.c:108
 __wake_up_common_lock+0xd0/0x130 kernel/sched/wait.c:138
 snd_pcm_update_state+0x46a/0x540 sound/core/pcm_lib.c:203
 snd_pcm_update_hw_ptr0+0xa75/0x1a50 sound/core/pcm_lib.c:464
 snd_pcm_period_elapsed+0x160/0x250 sound/core/pcm_lib.c:1805
 dummy_hrtimer_callback+0x94/0x1b0 sound/drivers/dummy.c:378
 __run_hrtimer kernel/time/hrtimer.c:1519 [inline]
 __hrtimer_run_queues+0x609/0xe40 kernel/time/hrtimer.c:1583
 hrtimer_run_softirq+0x17b/0x360 kernel/time/hrtimer.c:1600
 __do_softirq+0x29b/0x9f6 kernel/softirq.c:345
 invoke_softirq kernel/softirq.c:221 [inline]
 __irq_exit_rcu kernel/softirq.c:422 [inline]
 irq_exit_rcu+0x134/0x200 kernel/softirq.c:434
 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1100
 </IRQ>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632
RIP: 0010:native_save_fl arch/x86/include/asm/irqflags.h:29 [inline]
RIP: 0010:arch_local_save_flags arch/x86/include/asm/irqflags.h:70 [inline]
RIP: 0010:arch_irqs_disabled arch/x86/include/asm/irqflags.h:137 [inline]
RIP: 0010:acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline]
RIP: 0010:acpi_idle_do_entry+0x1c9/0x250 drivers/acpi/processor_idle.c:516
Code: dd 38 6e f8 84 db 75 ac e8 54 32 6e f8 e8 0f 1c 74 f8 e9 0c 00 00 00 e8 45 32 6e f8 0f 00 2d 4e 4a c5 00 e8 39 32 6e f8 fb f4 <9c> 5b 81 e3 00 02 00 00 fa 31 ff 48 89 de e8 14 3a 6e f8 48 85 db
RSP: 0018:ffffc90000d47d18 EFLAGS: 00000293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff8880115c3780 RSI: ffffffff89052537 RDI: 0000000000000000
RBP: ffff888141127064 R08: 0000000000000001 R09: 0000000000000001
R10: ffffffff81794168 R11: 0000000000000000 R12: 0000000000000001
R13: ffff888141127000 R14: ffff888141127064 R15: ffff888143331804
 acpi_idle_enter+0x361/0x500 drivers/acpi/processor_idle.c:647
 cpuidle_enter_state+0x1b1/0xc80 drivers/cpuidle/cpuidle.c:237
 cpuidle_enter+0x4a/0xa0 drivers/cpuidle/cpuidle.c:351
 call_cpuidle kernel/sched/idle.c:158 [inline]
 cpuidle_idle_call kernel/sched/idle.c:239 [inline]
 do_idle+0x3e1/0x590 kernel/sched/idle.c:300
 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:397
 start_secondary+0x274/0x350 arch/x86/kernel/smpboot.c:272
 secondary_startup_64_no_verify+0xb0/0xbb

which is due to the driver doing poll_wait() twice on the same
wait_queue_head. That is perfectly valid, but from checking the rest
of the kernel tree, it's the only driver that does this.

We can handle this just fine, we just need to ignore the second addition
as we'll get woken just fine on the first one.

Cc: stable@vger.kernel.org # 5.8+
Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users")
Reported-by: syzbot+28abd693db9e92c160d8@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we create it in a disabled state because IORING_SETUP_R_DISABLED is
set on ring creation, we need to ensure that we've kicked the thread if
we're exiting before it's been explicitly disabled. Otherwise we can run
into a deadlock where exit is waiting go park the SQPOLL thread, but the
SQPOLL thread itself is waiting to get a signal to start.

That results in the below trace of both tasks hung, waiting on each other:

INFO: task syz-executor458:8401 blocked for more than 143 seconds.
      Not tainted 5.11.0-next-20210226-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor458 state:D stack:27536 pid: 8401 ppid:  8400 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4324 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5075
 schedule+0xcf/0x270 kernel/sched/core.c:5154
 schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
 io_sq_thread_park fs/io_uring.c:7115 [inline]
 io_sq_thread_park+0xd5/0x130 fs/io_uring.c:7103
 io_uring_cancel_task_requests+0x24c/0xd90 fs/io_uring.c:8745
 __io_uring_files_cancel+0x110/0x230 fs/io_uring.c:8840
 io_uring_files_cancel include/linux/io_uring.h:47 [inline]
 do_exit+0x299/0x2a60 kernel/exit.c:780
 do_group_exit+0x125/0x310 kernel/exit.c:922
 __do_sys_exit_group kernel/exit.c:933 [inline]
 __se_sys_exit_group kernel/exit.c:931 [inline]
 __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43e899
RSP: 002b:00007ffe89376d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00000000004af2f0 RCX: 000000000043e899
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffffc0 R09: 0000000010000000
R10: 0000000000008011 R11: 0000000000000246 R12: 00000000004af2f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
INFO: task iou-sqp-8401:8402 can't die for more than 143 seconds.
task:iou-sqp-8401    state:D stack:30272 pid: 8402 ppid:  8400 flags:0x00004004
Call Trace:
 context_switch kernel/sched/core.c:4324 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5075
 schedule+0xcf/0x270 kernel/sched/core.c:5154
 schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
 do_wait_for_common kernel/sched/completion.c:85 [inline]
 __wait_for_common kernel/sched/completion.c:106 [inline]
 wait_for_common kernel/sched/completion.c:117 [inline]
 wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
 io_sq_thread+0x27d/0x1ae0 fs/io_uring.c:6717
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
INFO: task iou-sqp-8401:8402 blocked for more than 143 seconds.

Reported-by: syzbot+fb5458330b4442f2090d@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_run_ctx_fallback() can use xchg() instead of cmpxchg(). It's simpler
and faster.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is an unlikely but possible race using a freed context. That's
because req->task_work.func() can free a request, but we won't
necessarily find a completion in submit_state.comp and so all ctx refs
may be put by the time we do mutex_lock(&ctx->uring_ctx);

There are several reasons why it can miss going through
submit_state.comp: 1) req->task_work.func() didn't complete it itself,
but punted to iowq (e.g. reissue) and it got freed later, or a similar
situation with it overflowing and getting flushed by someone else, or
being submitted to IRQ completion, 2) As we don't hold the uring_lock,
someone else can do io_submit_flush_completions() and put our ref.
3) Bugs and code obscurities, e.g. failing to propagate issue_flags
properly.

One example is as follows

  CPU1                                  |  CPU2
=======================================================================
@req->task_work.func()                  |
  -> @req overflwed,                    |
     so submit_state.comp,nr==0         |
                                        | flush overflows, and free @req
                                        | ctx refs == 0, free it
ctx is dead, but we do                  |
	lock + flush + unlock           |

So take a ctx reference for each new ctx we see in __tctx_task_work(),
and do release it until we do all our flushing.

Fixes: 65453d1e ("io_uring: enable req cache for task_work items")
Reported-by: syzbot+a157ac7c03a56397f553@syzkaller.appspotmail.com
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
[axboe: fold in my one-liner and fix ref mismatch]
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This was always a weird work-around or file referencing, and we don't
need it anymore. Get rid of it.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We already run the fallback task_work in io_uring_try_cancel_requests(),
no need to duplicate at ring exit explicitly.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we move it in there, then we no longer have to care about it in io-wq.
This means we can drop the cred handling in io-wq, and we can drop the
REQ_F_WORK_INITIALIZED flag and async init functions as that was the last
user of it since we moved to the new workers. Then we can also drop
io_wq_work->creds, and just hold the personality u16 in there instead.
Suggested-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We're no longer checking anything that requires the work item to be
initialized, as we're not carrying any file related state there.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We prune the full cache regardless, get rid of the dead argument.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Destroy current's io-wq backend and tctx on __io_uring_task_cancel(),
aka exec(). Looks it's not strictly necessary, because it will be done
at some point when the task dies and changes of creds/files/etc. are
handled, but better to do that earlier to free io-wq and not potentially
lock previous mm and other resources for the time being.

It's safe to do because we wait for all requests of the current task to
complete, so no request will use tctx afterwards. Note, that
io_uring_files_cancel() may leave some requests for later reaping, so it
leaves tctx intact, that's ok as the task is dying anyway.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Make sure that we killed an io-wq by the time a task is dead.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We clear the bit marking the ctx task_work as active after having run
the queued work, but we really should be clearing it before. Otherwise
we can hit a tiny race ala:

CPU0					CPU1
io_task_work_add()			tctx_task_work()
					run_work
	add_to_list
	test_and_set_bit
					clear_bit
		already set

and CPU0 will return thinking the task_work is queued, while in reality
it's already being run. If we hit the condition after __tctx_task_work()
found no more work, but before we've cleared the bit, then we'll end up
thinking it's queued and will be run. In reality it is queued, but we
didn't queue the ctx task_work to ensure that it gets run.

Fixes: 7cbf1722 ("io_uring: provide FIFO ordering for task_work")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we put the io-wq from io_uring, we really want it to exit. Provide
a helper that does that for us. Couple that with not having the manager
hold a reference to the 'wq' and the normal SQPOLL exit will tear down
the io-wq context appropriate.

On the io-wq side, our wq context is per task, so only the task itself
is manipulating ->manager and hence it's safe to check and clear without
any extra locking. We just need to ensure that the manager task stays
around, in case it exits.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We want to reuse this completion, and a single complete should do just
fine. Ensure that we park ourselves first if requested, as that is what
lead to the initial deadlock in this area. If we've got someone attempting
to park us, then we can't proceed without having them finish first.

Fixes: 37d1e2e3 ("io_uring: move SQPOLL thread io-wq forked worker")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_uring_try_cancel_requests() matches not only current's requests, but
also of other exiting tasks, so we need to actively cancel them and not
just wait, especially since the function can be called on flush during
do_exit() -> exit_files().
Even if it's not a problem for now, it's much nicer to know that the
function tries to cancel everything it can.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we fail to fork an SQPOLL worker, we can hit cancel, and hence
attempted thread stop, with the thread already being stopped. Ensure
we check for that.

Also guard thread stop fully by the sqd mutex, just like we do for
park.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We are already freeing the wq struct in both spots, so don't put it and
get it freed twice.

Reported-by: syzbot+7bf785eedca35ca05501@syzkaller.appspotmail.com
Fixes: 4fb6ac32 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The manager waits for the workers, hence the manager is always valid if
workers are running. Now also have wq destroy wait for the manager on
exit, so we now everything is gone.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is a leftover from a different use cases, it's used to wait for
the manager to startup. Rename it as such.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we're in the process of shutting down the async context, then don't
create new workers if we already have at least the fixed one.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Instead of having to wait separately on workers and manager, just have
the manager wait on the workers. We use an atomic_t for the reference
here, as we need to start at 0 and allow increment from that. Since the
number of workers is naturally capped by the allowed nr of processes,
and that uses an int, there is no risk of overflow.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We need to have our worker count updated before continuing, to avoid
cases where we repeatedly think we need a new worker, but a fork is
already in progress.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull ide fix from Jens Axboe:
 "This is a leftover fix from 5.11, where I forgot to ship it your way"

* tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block:
  ide/falconide: Fix module unload

Merge tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix UNUSED_KSYMS_WHITELIST for Clang LTO

 - Make -s builds really silent irrespective of V= option

 - Fix build error when SUBLEVEL or PATCHLEVEL is empty

* tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
  kbuild: make -s option take precedence over V=1
  ia64: remove redundant READELF from arch/ia64/Makefile
  kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh
  kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
  kbuild: lto: add _mcount to list of used symbols