- 23 11月, 2016 1 次提交
-
-
由 Eric Dumazet 提交于
Andre Noll reported panics after my recent fix (commit 34fad54c "net: __skb_flow_dissect() must cap its return value") After some more headaches, Alexander root caused the problem to init_default_flow_dissectors() being called too late, in case a network driver like IGB is not a module and receives DHCP message very early. Fix is to call init_default_flow_dissectors() much earlier, as it is a core infrastructure and does not depend on another kernel service. Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAndre Noll <maan@tuebingen.mpg.de> Diagnosed-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2016 2 次提交
-
-
由 Florian Westphal 提交于
We need to zero out the private data area when application switches connection to different algorithm (TCP_CONGESTION setsockopt). When congestion ops get assigned at connect time everything is already zeroed because sk_alloc uses GFP_ZERO flag. But in the setsockopt case this contains whatever previous cc placed there. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao Feng 提交于
The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packe is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So l2tp_eth_dev_xmit should add the NET_XMIT_CN check. Signed-off-by: NGao Feng <gfree.wind@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2016 3 次提交
-
-
由 Jon Paul Maloy 提交于
The comment block in socket.c describing the locking policy is obsolete, and does not reflect current reality. We remove it in this commit. Since the current locking policy is much simpler and follows a mainstream approach, we see no need to add a new description. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhang Shengju 提交于
If the link is filtered out, loop index should also be updated. If not, loop index will not be correct. Fixes: dc599f76 ("net: Add support for filtering link dump by master device and kind") Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [<ffffffff829f835b>] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [<ffffffff8174d3cc>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [<ffffffff8174d666>] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [<ffffffff8174db7e>] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [<ffffffff8579047e>] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [<ffffffff813774f9>] task_work_run+0xf9/0x170 [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174c9ad>] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [<ffffffff8174cee2>] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [<ffffffff817476a8>] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [<ffffffff84c4f6a9>] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [<ffffffff84c58ac8>] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [<ffffffff851ddf67>] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [<ffffffff84c4af7b>] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [<ffffffff84c4b46f>] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [<ffffffff85e4d685>] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [<ffffffff811ddcb6>] save_stack_trace+0x16/0x20 [ 1116.897025] [<ffffffff8174c736>] save_stack+0x46/0xd0 [ 1116.897025] [<ffffffff8174cf61>] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [<ffffffff81748b28>] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [<ffffffff84c541eb>] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [<ffffffff84c5aca4>] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [<ffffffff84c5ad33>] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [<ffffffff84c5af23>] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [<ffffffff84c5cb6c>] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [<ffffffff8579044e>] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [<ffffffff850b2dfd>] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [<ffffffff851dc5a0>] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [<ffffffff84c4581d>] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [<ffffffff84c45976>] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [<ffffffff817a108c>] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [<ffffffff817a1605>] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [<ffffffff813774f9>] task_work_run+0xf9/0x170 [ 1116.897025] [<ffffffff81324aae>] do_exit+0x85e/0x2a00 [ 1116.897025] [<ffffffff81326dc8>] do_group_exit+0x108/0x330 [ 1116.897025] [<ffffffff81348cf7>] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [<ffffffff811b49af>] do_signal+0x7f/0x18f0 [ 1116.897025] [<ffffffff810039bf>] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [<ffffffff81006060>] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [<ffffffff85e4d726>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce497 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by: NBaozeng Ding <sploving1@gmail.com> Reported-by: NAndrey Konovalov <andreyknvl@google.com> Tested-by: NBaozeng Ding <sploving1@gmail.com> Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2016 2 次提交
-
-
由 Sabrina Dubroca 提交于
Add missing NDA_VLAN attribute's size. Fixes: 1e53d5bb ("net: Pass VLAN ID to rtnl_fdb_notify.") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Commit 2b15af6f ("af_unix: use freezable blocking calls in read") converts schedule_timeout() to its freezable version, it was probably correct at that time, but later, commit 2b514574 ("net: af_unix: implement splice for stream af_unix sockets") breaks the strong requirement for a freezable sleep, according to commit 0f9548ca: We shouldn't try_to_freeze if locks are held. Holding a lock can cause a deadlock if the lock is later acquired in the suspend or hibernate path (e.g. by dpm). Holding a lock can also cause a deadlock in the case of cgroup_freezer if a lock is held inside a frozen cgroup that is later acquired by a process outside that group. The pipe_lock is still held at that point. So use freezable version only for the recvmsg call path, avoid impact for Android. Fixes: 2b514574 ("net: af_unix: implement splice for stream af_unix sockets") Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Colin Cross <ccross@android.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2016 4 次提交
-
-
由 Johannes Berg 提交于
It's possible to make scanning consume almost arbitrary amounts of memory, e.g. by sending beacon frames with random BSSIDs at high rates while somebody is scanning. Limit the number of BSS table entries we're willing to cache to 1000, limiting maximum memory usage to maybe 4-5MB, but lower in practice - that would be the case for having both full-sized beacon and probe response frames for each entry; this seems not possible in practice, so a limit of 1000 entries will likely be closer to 0.5 MB. Cc: stable@vger.kernel.org Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Roman Mashak 提交于
Userland client should be able to read an event, and reflect it back to the kernel, therefore it needs to extract complete set of netlink flags. For example, this will allow "tc monitor" to distinguish Add and Replace operations. Signed-off-by: NRoman Mashak <mrv@mojatatu.com> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
If an ip6 tunnel is configured to inherit the traffic class from the inner header, the dst_cache must be disabled or it will foul the policy routing. The issue is apprently there since at leat Linux-2.6.12-rc2. Reported-by: NLiam McBirnie <liam.mcbirnie@boeing.com> Cc: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Andrei reports we still allocate netns ID from idr after we destroy it in cleanup_net(). cleanup_net(): ... idr_destroy(&net->netns_ids); ... list_for_each_entry_reverse(ops, &pernet_list, list) ops_exit_list(ops, &net_exit_list); -> rollback_registered_many() -> rtmsg_ifinfo_build_skb() -> rtnl_fill_ifinfo() -> peernet2id_alloc() After that point we should not even access net->netns_ids, we should check the death of the current netns as early as we can in peernet2id_alloc(). For net-next we can consider to avoid sending rtmsg totally, it is a good optimization for netns teardown path. Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids") Reported-by: NAndrei Vagin <avagin@gmail.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NAndrei Vagin <avagin@openvz.org> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2016 3 次提交
-
-
由 Andreas Gruenbacher 提交于
The IOP_XATTR flag is set on sockfs because sockfs supports getting the "system.sockprotoname" xattr. Since commit 6c6ef9f2, this flag is checked for setxattr support as well. This is wrong on sockfs because security xattr support there is supposed to be provided by security_inode_setsecurity. The smack security module relies on socket labels (xattrs). Fix this by adding a security xattr handler on sockfs that returns -EAGAIN, and by checking for -EAGAIN in setxattr. We cannot simply check for -EOPNOTSUPP in setxattr because there are filesystems that neither have direct security xattr support nor support via security_inode_setsecurity. A more proper fix might be to move the call to security_inode_setsecurity into sockfs, but it's not clear to me if that is safe: we would end up calling security_inode_post_setxattr after that as well. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Alexander Duyck 提交于
Fix a small memory leak that can occur where we leak a fib_alias in the event of us not being able to insert it into the local table. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Reported-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The patch that removed the FIB offload infrastructure was a bit too aggressive and also removed code needed to clean up us splitting the table if additional rules were added. Specifically the function fib_trie_flush_external was called at the end of a new rule being added to flush the foreign trie entries from the main trie. I updated the code so that we only call fib_trie_flush_external on the main table so that we flush the entries for local from main. This way we don't call it for every rule change which is what was happening previously. Fixes: 347e3b28 ("switchdev: remove FIB offload infrastructure") Reported-by: NEric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2016 4 次提交
-
-
由 Sabrina Dubroca 提交于
rtnl_xdp_size() only considers the size of the actual payload attribute, and misses the space taken by the attribute used for nesting (IFLA_XDP). Fixes: d1fdd913 ("rtnl: add option for setting link xdp prog") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reviewed-by: NBrenden Blanco <bblanco@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
The size reported by rtnl_vfinfo_size doesn't match the space used by rtnl_fill_vfinfo. rtnl_vfinfo_size currently doesn't account for the nest attributes used by statistics (added in commit 3b766cd8), nor for struct ifla_vf_tx_rate (since commit ed616689, which added ifla_vf_rate to the dump without removing ifla_vf_tx_rate, but replaced ifla_vf_tx_rate with ifla_vf_rate in the size computation). Fixes: 3b766cd8 ("net/core: Add reading VF statistics through the PF netdevice") Fixes: ed616689 ("net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira 提交于
Honor udptable parameter that is passed to __udp*_lib_mcast_deliver(), otherwise udplite broadcast/multicast use the wrong table and it breaks. Fixes: 2dc41cff ("udp: Use hash2 for long hash1 chains in __udp*_lib_mcast_deliver.") Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
In commit 24cf3af3 ("igmp: call ip_mc_clear_src..."), we forgot to remove igmpv3_clear_delrec() in ip_mc_down(), which also called ip_mc_clear_src(). This make us clear all IGMPv3 source filter info after NETDEV_DOWN. Move igmpv3_clear_delrec() to ip_mc_destroy_dev() and then no need ip_mc_clear_src() in ip_mc_destroy_dev(). On the other hand, we should restore back instead of free all source filter info in igmpv3_del_delrec(). Or we will not able to restore IGMPv3 source filter info after NETDEV_UP and NETDEV_POST_TYPE_CHANGE. Fixes: 24cf3af3 ("igmp: call ip_mc_clear_src() only when ...") Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2016 7 次提交
-
-
由 Felix Fietkau 提交于
A-MSDU aggregation alters the QoS header after a frame has been enqueued, so it needs to be ready before enqueue and not overwritten again afterwards Fixes: bb42f2d1 ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: NFelix Fietkau <nbd@nbd.name> Acked-by: NToke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
The call to ieee80211_txq_enqueue overwrites the vif pointer with the codel enqueue time, so setting it just before that call makes no sense. Signed-off-by: NFelix Fietkau <nbd@nbd.name> Acked-by: NToke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
The sequence number counter is used to derive the starting sequence number. Since that counter is updated on tx dequeue, the A-MPDU flag needs to be up to date at the tme of dequeue as well. This patch prevents sending more A-MPDU frames after the session has been terminated and also ensures that aggregation starts right after the session has been established Fixes: bb42f2d1 ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: NFelix Fietkau <nbd@nbd.name> Acked-by: NToke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Pedersen, Thomas 提交于
Some drivers (ath10k) report MCS 9 @ 20MHz, which technically isn't defined. To get more meaningful value than 0 out of this however, just extrapolate a bitrate from ratio of MCS 7 and 9 in channels where it is allowed. Signed-off-by: NThomas Pedersen <twp@qca.qualcomm.com> [add a comment about it in the code] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Felix Fietkau 提交于
This reverts commit c68df2e7. __sta_info_recalc_tim turns into a no-op if local->ops->set_tim is not set. This prevents the beacon TIM bit from being set for all drivers that do not implement this op (almost all of them), thus thoroughly essential AP mode powersave functionality. Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: c68df2e7 ("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE") Signed-off-by: NFelix Fietkau <nbd@nbd.name> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Filip Matusiak 提交于
This is a workaround for VHT-enabled STAs which break the spec and have the VHT-MCS Rx map filled in with value 3 for all eight spacial streams, an example is AR9462 in AP mode. As per spec, in section 22.1.1 Introduction to the VHT PHY A VHT STA shall support at least single spactial stream VHT-MCSs 0 to 7 (transmit and receive) in all supported channel widths. Some devices in STA mode will get firmware assert when trying to associate, examples are QCA9377 & QCA6174. Packet example of broken VHT Cap IE of AR9462: Tag: VHT Capabilities (IEEE Std 802.11ac/D3.1) Tag Number: VHT Capabilities (IEEE Std 802.11ac/D3.1) (191) Tag length: 12 VHT Capabilities Info: 0x00000000 VHT Supported MCS Set Rx MCS Map: 0xffff .... .... .... ..11 = Rx 1 SS: Not Supported (0x0003) .... .... .... 11.. = Rx 2 SS: Not Supported (0x0003) .... .... ..11 .... = Rx 3 SS: Not Supported (0x0003) .... .... 11.. .... = Rx 4 SS: Not Supported (0x0003) .... ..11 .... .... = Rx 5 SS: Not Supported (0x0003) .... 11.. .... .... = Rx 6 SS: Not Supported (0x0003) ..11 .... .... .... = Rx 7 SS: Not Supported (0x0003) 11.. .... .... .... = Rx 8 SS: Not Supported (0x0003) ...0 0000 0000 0000 = Rx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000 Tx MCS Map: 0xffff ...0 0000 0000 0000 = Tx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000 Signed-off-by: NFilip Matusiak <filip.matusiak@tieto.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Xin Long 提交于
Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if this sock has no connection (assoc), sk state would be changed to SCTP_SS_CLOSING, which is not as we expect. Besides, after that if users try to listen on this sock, kernel could even panic when it dereference sctp_sk(sk)->bind_hash in sctp_inet_listen, as bind_hash is null when sock has no assoc. This patch is to move sk state change after checking sk assocs is not empty, and also merge these two if() conditions and reduce indent level. Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received") Reported-by: NAndrey Konovalov <andreyknvl@google.com> Tested-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2016 3 次提交
-
-
由 Scott Mayhew 提交于
This fixes the following panic that can occur with NFSoRDMA. general protection fault: 0000 [#1] SMP Modules linked in: rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx5_ib ib_core intel_powerclamp coretemp kvm_intel kvm sg ioatdma ipmi_devintf ipmi_ssif dcdbas iTCO_wdt iTCO_vendor_support pcspkr irqbypass sb_edac shpchp dca crc32_pclmul ghash_clmulni_intel edac_core lpc_ich aesni_intel lrw gf128mul glue_helper ablk_helper mei_me mei ipmi_si cryptd wmi ipmi_msghandler acpi_pad acpi_power_meter nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt ahci fb_sys_fops ttm libahci mlx5_core tg3 crct10dif_pclmul drm crct10dif_common ptp i2c_core libata crc32c_intel pps_core fjes dm_mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 120 Comm: kworker/1:1 Not tainted 3.10.0-514.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.4.2 01/29/2015 Workqueue: events check_lifetime task: ffff88031f506dd0 ti: ffff88031f584000 task.ti: ffff88031f584000 RIP: 0010:[<ffffffff8168d847>] [<ffffffff8168d847>] _raw_spin_lock_bh+0x17/0x50 RSP: 0018:ffff88031f587ba8 EFLAGS: 00010206 RAX: 0000000000020000 RBX: 20041fac02080072 RCX: ffff88031f587fd8 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 20041fac02080072 RBP: ffff88031f587bb0 R08: 0000000000000008 R09: ffffffff8155be77 R10: ffff880322a59b00 R11: ffffea000bf39f00 R12: 20041fac02080072 R13: 000000000000000d R14: ffff8800c4fbd800 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff880322a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3c52d4547e CR3: 00000000019ba000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 20041fac02080002 ffff88031f587bd0 ffffffff81557830 20041fac02080002 ffff88031f587c78 ffff88031f587c40 ffffffff8155ae08 000000010157df32 0000000800000001 ffff88031f587c20 ffffffff81096acb ffffffff81aa37d0 Call Trace: [<ffffffff81557830>] lock_sock_nested+0x20/0x50 [<ffffffff8155ae08>] sock_setsockopt+0x78/0x940 [<ffffffff81096acb>] ? lock_timer_base.isra.33+0x2b/0x50 [<ffffffff8155397d>] kernel_setsockopt+0x4d/0x50 [<ffffffffa0386284>] svc_age_temp_xprts_now+0x174/0x1e0 [sunrpc] [<ffffffffa03b681d>] nfsd_inetaddr_event+0x9d/0xd0 [nfsd] [<ffffffff81691ebc>] notifier_call_chain+0x4c/0x70 [<ffffffff810b687d>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810b68b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff815e8538>] __inet_del_ifa+0x168/0x2d0 [<ffffffff815e8cef>] check_lifetime+0x25f/0x270 [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [<ffffffff810a8d76>] worker_thread+0x126/0x410 [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [<ffffffff810b052f>] kthread+0xcf/0xe0 [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81696418>] ret_from_fork+0x58/0x90 [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 Code: ca 75 f1 5d c3 0f 1f 80 00 00 00 00 eb d9 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 7e 04 a0 ff b8 00 00 02 00 <f0> 0f c1 03 89 c2 c1 ea 10 66 39 c2 75 03 5b 5d c3 83 e2 fe 0f RIP [<ffffffff8168d847>] _raw_spin_lock_bh+0x17/0x50 RSP <ffff88031f587ba8> Signed-off-by: NScott Mayhew <smayhew@redhat.com> Fixes: c3d4879e ("sunrpc: Add a function to close temporary transports immediately") Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Eric Dumazet 提交于
With syzkaller help, Marco Grassi found a bug in TCP stack, crashing in tcp_collapse() Root cause is that sk_filter() can truncate the incoming skb, but TCP stack was not really expecting this to happen. It probably was expecting a simple DROP or ACCEPT behavior. We first need to make sure no part of TCP header could be removed. Then we need to adjust TCP_SKB_CB(skb)->end_seq Many thanks to syzkaller team and Marco for giving us a reproducer. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMarco Grassi <marco.gra@gmail.com> Reported-by: NVladis Dronov <vdronov@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Suryaputra Lin 提交于
In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0 and then the state of the neigh for the new_gw is checked. If the state isn't valid then the redirected route is deleted. This behavior is maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway is assigned to peer->redirect_learned.a4 before calling ipv4_neigh_lookup(). After commit 5943634f ("ipv4: Maintain redirect and PMTU info in struct rtable again."), ipv4_neigh_lookup() is performed without the rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw) isn't zero, the function uses it as the key. The neigh is most likely valid since the old_gw is the one that sends the ICMP redirect message. Then the new_gw is assigned to fib_nh_exception. The problem is: the new_gw ARP may never gets resolved and the traffic is blackholed. So, use the new_gw for neigh lookup. Changes from v1: - use __ipv4_neigh_lookup instead (per Eric Dumazet). Fixes: 5943634f ("ipv4: Maintain redirect and PMTU info in struct rtable again.") Signed-off-by: NStephen Suryaputra Lin <ssurya@ieee.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2016 2 次提交
-
-
由 Eric Dumazet 提交于
After Tom patch, thoff field could point past the end of the buffer, this could fool some callers. If an skb was provided, skb->len should be the upper limit. If not, hlen is supposed to be the upper limit. Fixes: a6e544b0 ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Yibin Yang <yibyang@cisco.com Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NWillem de Bruijn <willemb@google.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin KaFai Lau 提交于
If the bpf program calls bpf_redirect(dev, 0) and dev is an ipip/ip6tnl, it currently includes the mac header. e.g. If dev is ipip, the end result is IP-EthHdr-IP instead of IP-IP. The fix is to pull the mac header. At ingress, skb_postpull_rcsum() is not needed because the ethhdr should have been pulled once already and then got pushed back just before calling the bpf_prog. At egress, this patch calls skb_postpull_rcsum(). If bpf_redirect(dev, BPF_F_INGRESS) is called, it also fails now because it calls dev_forward_skb() which eventually calls eth_type_trans(skb, dev). The eth_type_trans() will set skb->type = PACKET_OTHERHOST because the mac address does not match the redirecting dev->dev_addr. The PACKET_OTHERHOST will eventually cause the ip_rcv() errors out. To fix this, ____dev_forward_skb() is added. Joint work with Daniel Borkmann. Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel") Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@fb.com> Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2016 4 次提交
-
-
由 Ilya Dryomov 提交于
osdc->last_linger_id is a counter for lreq->linger_id, which is used for watch cookies. Starting with a large integer should ease the task of telling apart kernel and userspace clients. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Yan, Zheng 提交于
If your data pool was pool 0, ceph_file_layout_from_legacy() transform that to -1 unconditionally, which broke upgrades. We only want do that for a fully zeroed ceph_file_layout, so that it still maps to a file_layout_t. If any fields are set, though, we trust the fl_pgpool to be a valid pool. Fixes: 7627151e ("libceph: define new ceph_file_layout structure") Link: http://tracker.ceph.com/issues/17825Signed-off-by: NYan, Zheng <zyan@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Lance Richardson 提交于
This is a follow-up to commit 9ee6c5dc ("ipv4: allow local fragmentation in ip_finish_output_gso()"), updating the comment documenting cases in which fragmentation is needed for egress GSO packets. Suggested-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: NLance Richardson <lrichard@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chuck Lever 提交于
When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by: NVasco Steinmetz <linux@kyberraum.net> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NVasco Steinmetz <linux@kyberraum.net> Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
-
- 10 11月, 2016 5 次提交
-
-
由 David Ahern 提交于
Lorenzo noted an Android unit test failed due to e0d56fdd: "The expectation in the test was that the RST replying to a SYN sent to a closed port should be generated with oif=0. In other words it should not prefer the interface where the SYN came in on, but instead should follow whatever the routing table says it should do." Revert the change to ip_send_unicast_reply and tcp_v6_send_response such that the oif in the flow is set to the skb_iif only if skb_iif is an L3 master. Fixes: e0d56fdd ("net: l3mdev: remove redundant calls") Reported-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Tested-by: NLorenzo Colitti <lorenzo@google.com> Acked-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathias Krause 提交于
To avoid having dangling function pointers left behind, reset calcit in rtnl_unregister(), too. This is no issue so far, as only the rtnl core registers a netlink handler with a calcit hook which won't be unregistered, but may become one if new code makes use of the calcit hook. Fixes: c7ac8679 ("rtnetlink: Compute and store minimum ifinfo...") Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
icmp_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have an rt. Update icmp_route_lookup to use the rt on the skb to determine L3 domain. Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Routes can specify an mtu explicitly or inherit the mtu from the underlying device - this inheritance is implemented in dst->ops->mtu handlers ip6_mtu() and ip6_blackhole_mtu(). Currently changing the mtu of a device adds mtu explicitly to routes using that device. ie. # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65535 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 After this patch the route entry no longer changes unless it already has an mtu. There is no need: this inheritance is already done in ip6_mtu() # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route add local 2000::2 dev lo mtu 2000 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 1501 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 1501 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 # ip -6 route del local 2000::2 This is desirable because changing device mtu and then resetting it to the previous value shouldn't change the user visible routing table. Signed-off-by: NMaciej Żenczykowski <maze@google.com> CC: Eric Dumazet <edumazet@google.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Soheil Hassas Yeganeh 提交于
Do not send the next message in sendmmsg for partial sendmsg invocations. sendmmsg assumes that it can continue sending the next message when the return value of the individual sendmsg invocations is positive. It results in corrupting the data for TCP, SCTP, and UNIX streams. For example, sendmmsg([["abcd"], ["efgh"]]) can result in a stream of "aefgh" if the first sendmsg invocation sends only the first byte while the second sendmsg goes through. Datagram sockets either send the entire datagram or fail, so this patch affects only sockets of type SOCK_STREAM and SOCK_SEQPACKET. Fixes: 228e548e ("net: Add sendmmsg socket system call") Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-