Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 10 6月, 2019 19 次提交
  3. 09 6月, 2019 18 次提交
    • D
      Merge branch 'PTP-support-for-the-SJA1105-DSA-driver' · 8d94a873
      由 David S. Miller 提交于 
      Vladimir Oltean says:

====================
PTP support for the SJA1105 DSA driver

This patchset adds the following:

 - A timecounter/cyclecounter based PHC for the free-running
   timestamping clock of this switch.

 - A state machine implemented in the DSA tagger for SJA1105, which
   keeps track of metadata follow-up Ethernet frames (the switch's way
   of transmitting RX timestamps).

Clock manipulations on the actual hardware PTP clock will have to be
implemented anyway, for the TTEthernet block and the time-based ingress
policer.

v3 patchset can be found at:
https://lkml.org/lkml/2019/6/4/954

Changes from v3:

- Made it compile with the SJA1105 DSA driver and PTP driver as modules.

- Reworked/simplified/fixed some issues in 03/17
  (dsa_8021q_remove_header) and added an ASCII image that
  illustrates the transformation that is taking place.

- Removed a useless check for sja1105_is_link_local from 16/17 (RX
  timestamping) which also made previous 08/17 patch ("Move
  sja1105_is_link_local to include/linux") useless and therefore dropped.

v2 patchset can be found at:
https://lkml.org/lkml/2019/6/2/146

Changes from v2:

- Broke previous 09/10 patch (timestamping) into multiple smaller
  patches.

- Every patch in the series compiles.

v1 patchset can be found at:
https://lkml.org/lkml/2019/5/28/1093

Changes from v1:

- Removed the addition of the DSA .can_timestamp callback.

- Waiting for meta frames is done completely inside the tagger, and all
  frames emitted on RX are already partially timestamped.

- Added a global data structure for the tagger common to all ports.

- Made PTP work with ports in standalone mode, by limiting use of the
  DMAC-mangling "incl_srcpt" mode only when ports are bridged, aka when
  the DSA master is already promiscuous and can receive anything.
  Also changed meta frames to be sent at the 01-80-C2-00-00-0E DMAC.

- Made some progress w.r.t. observed negative path delay.  Apparently it
  only appears when the delay mechanism is the delay request-response
  (end-to-end) one. If peer delay is used (-P), the path delay is
  positive and appears reasonable for an 1000Base-T link (485 ns in
  steady state).

  SJA1105 as PTP slave (OC) with E2E path delay:

ptp4l[55.600]: master offset          8 s2 freq  +83677 path delay     -2390
ptp4l[56.600]: master offset         17 s2 freq  +83688 path delay     -2391
ptp4l[57.601]: master offset          6 s2 freq  +83682 path delay     -2391
ptp4l[58.601]: master offset         -1 s2 freq  +83677 path delay     -2391

  SJA1105 as PTP slave (OC) with P2P path delay:

ptp4l[48.343]: master offset          5 s2 freq  +83715 path delay       484
ptp4l[48.468]: master offset         -3 s2 freq  +83705 path delay       485
ptp4l[48.593]: master offset          0 s2 freq  +83708 path delay       485
ptp4l[48.718]: master offset          1 s2 freq  +83710 path delay       485
ptp4l[48.844]: master offset          1 s2 freq  +83710 path delay       485
ptp4l[48.969]: master offset         -5 s2 freq  +83702 path delay       485
ptp4l[49.094]: master offset          3 s2 freq  +83712 path delay       485
ptp4l[49.219]: master offset          4 s2 freq  +83714 path delay       485
ptp4l[49.344]: master offset         -5 s2 freq  +83702 path delay       485
ptp4l[49.469]: master offset          3 s2 freq  +83713 path delay       487
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8d94a873
    • V
      net: dsa: sja1105: Expose PTP timestamping ioctls to userspace · a602afd2
      由 Vladimir Oltean 提交于 
      This enables the PTP support towards userspace applications such as
linuxptp.

The switches can timestamp only trapped multicast MAC frames, and
therefore only the profiles of 1588 over L2 are supported.

TX timestamping can be enabled per port, but RX timestamping is enabled
globally. As long as RX timestamping is enabled, the switch will emit
metadata follow-up frames that will be processed by the tagger. It may
be a problem that linuxptp does not restore the RX timestamping settings
when exiting.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a602afd2
    • V
      net: dsa: sja1105: Add a state machine for RX timestamping · f3097be2
      由 Vladimir Oltean 提交于 
      Meta frame reception relies on the hardware keeping its promise that it
will send no other traffic towards the CPU port between a link-local
frame and a meta frame.  Otherwise there is no other way to associate
the meta frame with the link-local frame it's holding a timestamp of.
The receive function is made stateful, and buffers a timestampable frame
until its meta frame arrives, then merges the two, drops the meta and
releases the link-local frame up the stack.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f3097be2
    • V
      net: dsa: sja1105: Increase priority of CPU-trapped frames · 08fde09a
      由 Vladimir Oltean 提交于 
      Without noticing any particular issue, this patch ensures that
management traffic is treated with the maximum priority on RX by the
switch.  This is generally desirable, as the driver keeps a state
machine that waits for metadata follow-up frames as soon as a management
frame is received.  Increasing the priority helps expedite the reception
(and further reconstruction) of the RX timestamp to the driver after the
MAC has generated it.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      08fde09a
    • V
      net: dsa: sja1105: Add a global sja1105_tagger_data structure · 844d7edc
      由 Vladimir Oltean 提交于 
      This will be used to keep state for RX timestamping. It is global
because the switch serializes timestampable and meta frames when
trapping them towards the CPU port (lower port indices have higher
priority) and therefore having one state machine per port would create
unnecessary complications.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      844d7edc
    • V
      net: dsa: sja1105: Receive and decode meta frames · e53e18a6
      由 Vladimir Oltean 提交于 
      This adds support in the tagger for understanding the source port and
switch id of meta frames.  Their timestamp is also extracted but not
used yet - this needs to be done in a state machine that modifies the
previously received timestampable frame - will be added in a follow-up
patch.

Also take the opportunity to:
- Remove a comment in sja1105_filter made obsolete by e8d67fa5
  ("net: dsa: sja1105: Don't store frame type in skb->cb")
- Reorder the checks in sja1105_filter to optimize for the most likely
  scenario first: regular traffic.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e53e18a6
    • V
      net: dsa: sja1105: Make sja1105_is_link_local not match meta frames · 79fa7061
      由 Vladimir Oltean 提交于 
      Although meta frames are configured to be sent at SJA1105_META_DMAC
(01-80-C2-00-00-0E) which is a multicast MAC address that would also be
trapped by the switch to the CPU, were it to receive it on a front-panel
port, meta frames are conceptually not link-local frames, they only
carry their RX timestamps.

The choice of sending meta frames at a multicast DMAC is a pragmatic
one, to avoid installing an extra entry to the DSA master port's
multicast MAC filter.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      79fa7061
    • V
      net: dsa: sja1105: Add support for the AVB Parameters Table · 24c01949
      由 Vladimir Oltean 提交于 
      This table is used to program the switch to emit "meta" follow-up
Ethernet frames (which contain partial RX timestamps) after each
link-local frame that was trapped to the CPU port through MAC filtering.
This includes PTP frames.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      24c01949
    • V
      net: dsa: sja1105: Build a minimal understanding of meta frames · d3f9b90b
      由 Vladimir Oltean 提交于 
      Meta frames are sent on the CPU port by the switch if RX timestamping is
enabled. They contain a partial timestamp of the previous frame.

They are Ethernet frames with the Ethernet header constructed out of:

- SJA1105_META_DMAC
- SJA1105_META_SMAC
- ETH_P_SJA1105_META

The Ethernet payload will be decoded in a follow-up patch.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d3f9b90b
    • V
      net: dsa: sja1105: Add logic for TX timestamping · 47ed985e
      由 Vladimir Oltean 提交于 
      On TX, timestamping is performed synchronously from the
port_deferred_xmit worker thread.
In management routes, the switch is requested to take egress timestamps
(again partial), which are reconstructed and appended to a clone of the
skb that was just sent.  The cloning is done by DSA and we retrieve the
pointer from the structure that DSA keeps in skb->cb.
Then these clones are enqueued to the socket's error queue for
application-level processing.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      47ed985e
    • V
      net: dsa: sja1105: Add support for the PTP clock · bb77f36a
      由 Vladimir Oltean 提交于 
      The design of this PHC driver is influenced by the switch's behavior
w.r.t. timestamping.  It exposes two PTP counters, one free-running
(PTPTSCLK) and the other offset- and frequency-corrected in hardware
through PTPCLKVAL, PTPCLKADD and PTPCLKRATE.  The MACs can sample either
of these for frame timestamps.

However, the user manual warns that taking timestamps based on the
corrected clock is less than useful, as the switch can deliver corrupted
timestamps in a variety of circumstances.

Therefore, this PHC uses the free-running PTPTSCLK together with a
timecounter/cyclecounter structure that translates it into a software
time domain.  Thus, the settime/adjtime and adjfine callbacks are
hardware no-ops.

The timestamps (introduced in a further patch) will also be translated
to the correct time domain before being handed over to the userspace PTP
stack.

The introduction of a second set of PHC operations that operate on the
hardware PTPCLKVAL/PTPCLKADD/PTPCLKRATE in the future is somewhat
unavoidable, as the TTEthernet core uses the corrected PTP time domain.
However, the free-running counter + timecounter structure combination
will suffice for now, as the resulting timestamps yield a sub-50 ns
synchronization offset in steady state using linuxptp.

For this patch, in absence of frame timestamping, the operations of the
switch PHC were tested by syncing it to the system time as a local slave
clock with:

phc2sys -s CLOCK_REALTIME -c swp2 -O 0 -m -S 0.01
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bb77f36a
    • V
      net: dsa: sja1105: Export symbols for upcoming PTP driver · 28e8fb3e
      由 Vladimir Oltean 提交于 
      These are needed for the situation where the switch driver and the PTP
driver are both built as modules.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      28e8fb3e
    • V
      net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode · 42824463
      由 Vladimir Oltean 提交于 
      The incl_srcpt setting makes the switch mangle the destination MACs of
multicast frames trapped to the CPU - a primitive tagging mechanism that
works even when we cannot use the 802.1Q software features.

The downside is that the two multicast MAC addresses that the switch
traps for L2 PTP (01-80-C2-00-00-0E and 01-1B-19-00-00-00) quickly turn
into a lot more, as the switch encodes the source port and switch id
into bytes 3 and 4 of the MAC. The resulting range of MAC addresses
would need to be installed manually into the DSA master port's multicast
MAC filter, and even then, most devices might not have a large enough
MAC filtering table.

As a result, only limit use of incl_srcpt to when it's strictly
necessary: when under a VLAN filtering bridge.  This fixes PTP in
non-bridged mode (standalone ports). Otherwise, PTP frames, as well as
metadata follow-up frames holding RX timestamps won't be received
because they will be blocked by the master port's MAC filter.
Linuxptp doesn't help, because it only requests the addition of the
unmodified PTP MACs to the multicast filter.
This issue is not seen in bridged mode because the master port is put in
promiscuous mode when the slave ports are enslaved to a bridge.
Therefore, there is no downside to having the incl_srcpt mechanism
active there.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      42824463
    • V
      net: dsa: sja1105: Reverse TPID and TPID2 · f9a1a764
      由 Vladimir Oltean 提交于 
      >From reading the P/Q/R/S user manual, it appears that TPID is used by
the switch for detecting S-tags and TPID2 for C-tags.  Their meaning is
not clear from the E/T manual.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f9a1a764
    • V
      net: dsa: sja1105: Move sja1105_change_tpid into sja1105_vlan_filtering · 070ca3bb
      由 Vladimir Oltean 提交于 
      This is a cosmetic patch, pre-cursor to making another change to the
General Parameters Table (incl_srcpt) which does not logically pertain
to the sja1105_change_tpid function name, but not putting it there would
otherwise create a need of resetting the switch twice.

So simply move the existing code into the .port_vlan_filtering callback,
where the incl_srcpt change will be added as well.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      070ca3bb
    • V
      net: dsa: tag_8021q: Create helper function for removing VLAN header · d4619336
      由 Vladimir Oltean 提交于 
      This removes the existing implementation from tag_sja1105, which was
partially incorrect (it was not changing the MAC header offset, thereby
leaving it to point 4 bytes earlier than it should have).

This overwrites the VLAN tag by moving the Ethernet source and
destination MACs 4 bytes to the right. Then skb->data (assumed to be
pointing immediately after the EtherType) is temporarily pushed to the
beginning of the new Ethernet header, the new Ethernet header offset and
length are recorded, then skb->data is moved back to where it was.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d4619336
    • V
      net: dsa: Add teardown callback for drivers · 5e3f847a
      由 Vladimir Oltean 提交于 
      This is helpful for e.g. draining per-driver (not per-port) tagger
queues.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e3f847a
    • V
      net: dsa: Keep a pointer to the skb clone for TX timestamping · 146d442c
      由 Vladimir Oltean 提交于 
      For drivers that use deferred_xmit for PTP frames (such as sja1105),
there is no need to perform matching between PTP frames and their egress
timestamps, since the sending process can be serialized.

In that case, it makes sense to have the pointer to the skb clone that
DSA made directly in the skb->cb. It will be used for pushing the egress
timestamp back in the application socket's error queue.
Signed-off-by: NVladimir Oltean <olteanv@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      146d442c
  5. 08 6月, 2019 3 次提交
    • D
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · a6cdeeb1
      由 David S. Miller 提交于 
      Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a6cdeeb1
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 1e1d9263
      由 Linus Torvalds 提交于 
      Pull networking fixes from David Miller:

 1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.

 2) Read SFP eeprom in max 16 byte increments to avoid problems with
    some SFP modules, from Russell King.

 3) Fix UDP socket lookup wrt. VRF, from Tim Beale.

 4) Handle route invalidation properly in s390 qeth driver, from Julian
    Wiedmann.

 5) Memory leak on unload in RDS, from Zhu Yanjun.

 6) sctp_process_init leak, from Neil HOrman.

 7) Fix fib_rules rule insertion semantic change that broke Android,
    from Hangbin Liu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  pktgen: do not sleep with the thread lock held.
  net: mvpp2: Use strscpy to handle stat strings
  net: rds: fix memory leak in rds_ib_flush_mr_pool
  ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
  ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
  Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
  net: aquantia: fix wol configuration not applied sometimes
  ethtool: fix potential userspace buffer overflow
  Fix memory leak in sctp_process_init
  net: rds: fix memory leak when unload rds_rdma
  ipv6: fix the check before getting the cookie in rt6_get_cookie
  ipv4: not do cache for local delivery if bc_forwarding is enabled
  s390/qeth: handle error when updating TX queue count
  s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
  s390/qeth: check dst entry before use
  s390/qeth: handle limited IPv4 broadcast in L3 TX path
  net: fix indirect calls helpers for ptype list hooks.
  net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
  udp: only choose unbound UDP socket for multicast when not in a VRF
  net/tls: replace the sleeping lock around RX resync with a bit lock
  ...
      1e1d9263
    • L
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma · 6e38335d
      由 Linus Torvalds 提交于 
      Pull rdma fixes from Jason Gunthorpe:
 "Things are looking pretty quiet here in RDMA, not too many bug fixes
  rolling in right now. The usual driver bug fixes and fixes for a
  couple of regressions introduced in 5.2:

   - Fix a race on bootup with RDMA device renaming and srp. SRP also
     needs to rename its internal sys files

   - Fix a memory leak in hns

   - Don't leak resources in efa on certain error unwinds

   - Don't panic in certain error unwinds in ib_register_device

   - Various small user visible bug fix patches for the hfi and efa
     drivers

   - Fix the 32 bit compilation break"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/efa: Remove MAYEXEC flag check from mmap flow
  mlx5: avoid 64-bit division
  IB/hfi1: Validate page aligned for a given virtual address
  IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
  IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
  IB/rdmavt: Fix alloc_qpn() WARN_ON()
  RDMA/core: Fix panic when port_data isn't initialized
  RDMA/uverbs: Pass udata on uverbs error unwind
  RDMA/core: Clear out the udata before error unwind
  RDMA/hns: Fix PD memory leak for internal allocation
  RDMA/srp: Rename SRP sysfs name after IB device rename trigger
      6e38335d