- 13 5月, 2011 3 次提交
-
-
由 Archit Taneja 提交于
Introduce DSI2 PLL clock sources needed by LCD2 channel and DSI2 Protocol engine and DISPC Functional clock. Do the following: - Modify dss_get_dsi_clk_source() and dss_select_dsi_clk_source() to take the dsi module number as an argument. - Create debugfs files for dsi2, split the corresponding debugfs functions. - Allow DPI to use these new clock sources. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Archit Taneja 提交于
The DSI interface is represented as a platform device, using the DSI platform driver(dsi.c). The current DSI driver design is capable of running only one instance of a DSI device. On OMAP4, there are 2 very similar DSI modules which can be represented as instances of "omapdss_dsi" platform device. Add member "module" in "dssdev.phy.dsi" that tells us which DSI module's lanes the panel is connected to. Modify dsi.c functions to take the device's platform_device struct pointer, provide functions dsi_get_dsidev_from_dssdev() and dsi_get_dsidev_from_id() take the panel's omap_dss_device and module number respectively, and return the platform_device pointer. Currently, the dsi struct is declared globally and is accessed when dsi data is needed. The new pdev argument will be used later to provide the platform device's dsi related data. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Archit Taneja 提交于
Add pointer to omap_dss_device struct as an argument in the functions which are exported to dsi panel drivers. This argument will tell the DSI driver which DSI interface's data it has to choose. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 11 5月, 2011 14 次提交
-
-
由 Tomi Valkeinen 提交于
ULPS is a low power state where the DSI lanes are kept at ground. This patch implements ULPS by having a DSI bus inactivity timer which triggers the entry to ULPS. ULPS exit will happen automatically when the driver needs to do something on the DSI lanes. The ulps_timeout is configurable from board file or via sysfs. Additionally another sysfs file, "ulps", can be used to check the current ULPS state, or to manually enter or exit ULPS. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
ESD check in Taal driver is currently on/off feature with hardcoded interval. This patch changes it to a configurable interval, which can be set from the board file. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add dsi_mux_pads function pointer to omap_dss_board_info, and use the function pointer in DSI code to configure the DSI pads either to normal DSI operation, or to pull down when in ULPS. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Add parameter to omapdss_dsi_display_disable() which the panel driver can use to tell if the DSI lanes should be put to ULPS before disabling the interface. This can be used to skip ULPS entry in cases where the panel doesn't care about ULPS state, for example when the panel will be reset, or when the display interface will be enabled again right after the disable. This will speed up the operation considerably in cases where entering ULPS would fail with timeout, and the panel driver isn't even interested in entering ULPS. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
The DSI pins are powered by VDDS_DSI. If VDDS_DSI is off, the DSI pins are floating even if they are pinmuxed to, say, safe mode and there's a pull down/up. This patch gives the panel drivers an option to leave the VDDS_DSI power enabled while the DSS itself is turned off. This can be used to keep the DSI lanes in a valid state while DSS is off, if the DSI pins are muxed for pull down (not done in this patch). There will be a slight power consumption increase (~100 uA?) when the VDDS_DSI is left on, but because this option is used when the panel is left on, the regulator consumption is negligible compared to panel power consumption. When the panel is fully turned off the VDDS_DSI is also turned off. As an added bonus this will give us faster start up time when starting up the DSS and the regulator is already enabled. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Archit Taneja 提交于
Move some of the configurable HDMI PLL parameters to dssdev.clock struct. Cleanup the function hdmi_compute_pll() by using the parameters defined in the board file and do some cosmetic modifications. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Archit Taneja 提交于
Add enum dss_clock_source in dssdev.clocks struct so that the clock sources can be specified in the board file. Replace hard coded clock sources in dsi.c, dpi.c and replace them with the new clock source members in dssdev.clocks. Modify the sdp4430_lcd_device struct in board-4430sdp.c to specify clock sources for DISPC_FCLK, LCD1_CLK and DSI1_FCLK. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Archit Taneja 提交于
Change enum dss_clk_source to omap_dss_clock_source and move it to 'plat/display.h'. Change the enum members to attach "OMAP_" in the beginning. These changes are done in order to specify the clock sources for DSS in the board file. Signed-off-by: NArchit Taneja <archit@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
omap_dss_register_device and omap_dss_unregister_device can only be called from core.c, so we can make it static. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Jani Nikula 提交于
Add get_dimensions() to struct omap_dss_driver. Use the call, if supported by the driver, in OMAPFB. Signed-off-by: NJani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Clock configuration was defined inside dssdev.phy.dsi struct. The clock config doesn't really belong there, and so it's moved to dssdev.clock struct. Now the explicit clock configuration could also be used for other interfaces than DSI, although there's no support for it currently. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
arch/arm/plat-omap/include/plat/nokia-dsi-panel.h is an include for the OMAP DSS panel driver for Nokia's DSI displays. A more logical place for it is in include/video. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 10 5月, 2011 1 次提交
-
-
由 Mikulas Patocka 提交于
Linux kernel excludes guard page when performing mlock on a VMA with down-growing stack. However, some architectures have up-growing stack and locking the guard page should be excluded in this case too. This patch fixes lvm2 on PA-RISC (and possibly other architectures with up-growing stack). lvm2 calculates number of used pages when locking and when unlocking and reports an internal error if the numbers mismatch. [ Patch changed fairly extensively to also fix /proc/<pid>/maps for the grows-up case, and to move things around a bit to clean it all up and share the infrstructure with the /proc bits. Tested on ia64 that has both grow-up and grow-down segments - Linus ] Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Tested-by: NTony Luck <tony.luck@gmail.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2011 1 次提交
-
-
由 Daniel Vetter 提交于
The looping helper didn't do anything due to a superficial semicolon. Furthermore one of the two dump functions suffered from copy&paste fail. While staring at the code I've also noticed that the replace helper (currently unused) is a bit broken. Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 5月, 2011 1 次提交
-
-
由 Arjan van de Ven 提交于
This partially reverts commit e6e1e259. That commit changed the structure layout of the trace structure, which in turn broke PowerTOP (1.9x generation) quite badly. I appreciate not wanting to expose the variable in question, and PowerTOP was not using it, so I've replaced the variable with just a padding field - that way if in the future a new field is needed it can just use this padding field. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 5月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
The SLUB allocator use of the cmpxchg_double logic was wrong: it actually needs the irq-safe one. That happens automatically when we use the native unlocked 'cmpxchg8b' instruction, but when compiling the kernel for older x86 CPUs that do not support that instruction, we fall back to the generic emulation code. And if you don't specify that you want the irq-safe version, the generic code ends up just open-coding the cmpxchg8b equivalent without any protection against interrupts or preemption. Which definitely doesn't work for SLUB. This was reported by Werner Landgraf <w.landgraf@ru.ru>, who saw instability with his distro-kernel that was compiled to support pretty much everything under the sun. Most big Linux distributions tend to compile for PPro and later, and would never have noticed this problem. This also fixes the prototypes for the irqsafe cmpxchg_double functions to use 'bool' like they should. [ Btw, that whole "generic code defaults to no protection" design just sounds stupid - if the code needs no protection, there is no reason to use "cmpxchg_double" to begin with. So we should probably just remove the unprotected version entirely as pointless. - Linus ] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reported-and-tested-by: Nwerner <w.landgraf@ru.ru> Acked-and-tested-by: NIngo Molnar <mingo@elte.hu> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1105041539050.3005@ionosSigned-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 5月, 2011 2 次提交
-
-
由 Alex Deucher 提交于
Out of the entire GART/VM subsystem, the hw designers changed the location of 3 regs. v2: airlied: add parameter for userspace to work from. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 5月, 2011 1 次提交
-
-
由 Jean Delvare 提交于
Move the SMBus device ID definitions of recent devices from pci_ids.h to the i2c-i801.c driver file. They don't have to be shared, as they are clearly identified and only used in this driver. In the future, such IDs will go to i2c-i801 directly. This will make adding support for new devices much faster and easier, as it will avoid cross- subsystem patch sets and merge conflicts. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Seth Heasley <seth.heasley@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 29 4月, 2011 3 次提交
-
-
由 Eric Paris 提交于
Change flex_array_prealloc to take the number of elements for which space should be allocated instead of the last (inclusive) element. Users and documentation are updated accordingly. flex_arrays got introduced before they had users. When folks started using it, they ended up needing a different API than was coded up originally. This swaps over to the API that folks apparently need. Based-on-patch-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NEric Paris <eparis@redhat.com> Tested-by: NChris Richards <gizmo@giz-works.com> Acked-by: NDave Hansen <dave@linux.vnet.ibm.com> Cc: stable@kernel.org [2.6.38+]
-
由 Paul Stewart 提交于
Resubmit interrupt URB if device is open. Use a flag set in usbnet_open() to determine this state. Also kill and free interrupt URB in usbnet_disconnect(). [Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git] Signed-off-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Arcangeli 提交于
The huge_memory.c THP page fault was allowed to run if vm_ops was null (which would succeed for /dev/zero MAP_PRIVATE, as the f_op->mmap wouldn't setup a special vma->vm_ops and it would fallback to regular anonymous memory) but other THP logics weren't fully activated for vmas with vm_file not NULL (/dev/zero has a not NULL vma->vm_file). So this removes the vm_file checks so that /dev/zero also can safely use THP (the other albeit safer approach to fix this bug would have been to prevent the THP initial page fault to run if vm_file was set). After removing the vm_file checks, this also makes huge_memory.c stricter in khugepaged for the DEBUG_VM=y case. It doesn't replace the vm_file check with a is_pfn_mapping check (but it keeps checking for VM_PFNMAP under VM_BUG_ON) because for a is_cow_mapping() mapping VM_PFNMAP should only be allowed to exist before the first page fault, and in turn when vma->anon_vma is null (so preventing khugepaged registration). So I tend to think the previous comment saying if vm_file was set, VM_PFNMAP might have been set and we could still be registered in khugepaged (despite anon_vma was not NULL to be registered in khugepaged) was too paranoid. The is_linear_pfn_mapping check is also I think superfluous (as described by comment) but under DEBUG_VM it is safe to stay. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=33682Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Reported-by: NCaspar Zhang <bugs@casparzhang.com> Acked-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NRik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [2.6.38.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2011 3 次提交
-
-
由 Mark Brown 提交于
This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Guennadi Liakhovetski 提交于
Currently there is a race in the MMC core between a card-detect rescan work and the clock-gating work, scheduled from a command completion. Fix it by removing the dedicated clock-gating mutex and using the MMC standard locking mechanism instead. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <damm@opensource.se> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Trond Myklebust 提交于
When readdir() returns a directory entry for the root of a mounted filesystem, Linux follows the old convention of returning the inode number of the covered directory (despite newer versions of POSIX declaring that this is a bug). To ensure this continues to work, the NFSv4 readdir implementation requests the 'mounted-on-fileid' from the server. However, readdirplus also needs to instantiate an inode for this entry, and for that, we also need to request the real fileid as per this patch. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 4月, 2011 2 次提交
-
-
由 Dave Airlie 提交于
i915 calls the panic handler function on last close to reset the modes, however this is a really bad idea for multi-gpu machines, esp shareable gpus machines. So add a new entry point for the driver to just restore its own fbcon mode. v2: move code into fb helper, fix panic code to block mode change on powered off GPUs. [airlied: this hits drm core and I wrote it and it was reviewed on intel-gfx so really I signed it off twice ;-).] Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
needed by mesa for htile setup. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 26 4月, 2011 2 次提交
-
-
由 Christoph Hellwig 提交于
Now that the whole dcache_hash_bucket crap is gone, go all the way and also remove the weird locking layering violations for locking the hash buckets. Add hlist_bl_lock/unlock helpers to move the locking into the list abstraction instead of requiring each caller to open code it. After all allowing for the bit locks is the whole point of these helpers over the plain hlist variant. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
When we are waiting for the bit-lock to be released, and are looping over the 'cpu_relax()' should not be doing anything else - otherwise we miss the point of trying to do the whole 'cpu_relax()'. Do the preemption enable/disable around the loop, rather than inside of it. Noticed when I was looking at the code generation for the dcache __d_drop usage, and the code just looked very odd. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2011 3 次提交
-
-
由 Frederic Weisbecker 提交于
When a task is traced and is in a stopped state, the tracer may execute a ptrace request to examine the tracee state and get its task struct. Right after, the tracee can be killed and thus its breakpoints released. This can happen concurrently when the tracer is in the middle of reading or modifying these breakpoints, leading to dereferencing a freed pointer. Hence, to prepare the fix, create a generic breakpoint reference holding API. When a reference on the breakpoints of a task is held, the breakpoints won't be released until the last reference is dropped. After that, no more ptrace request on the task's breakpoints can be serviced for the tracer. Reported-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: v2.6.33.. <stable@kernel.org> Link: http://lkml.kernel.org/r/1302284067-7860-2-git-send-email-fweisbec@gmail.com
-
由 Trond Myklebust 提交于
On occasion, it is useful for the NFS layer to distinguish between soft timeouts and other EIO errors due to (say) encoding errors, or authentication errors. The following patch ensures that the default behaviour of the RPC layer remains to return EIO on soft timeouts (until we have audited all the callers). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If a server for some reason keeps sending NFS4ERR_DELAY errors, we can end up looping forever inside nfs4_proc_create_session, and so the usual mechanisms for detecting if the nfs_client is dead don't work. Fix this by ensuring that we loop inside the nfs4_state_manager thread instead. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 4月, 2011 3 次提交
-
-
由 Tejun Heo 提交于
NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM is used. Implement ATA_FLAG_NO_DIPM and apply it. This problem was reported by Stefan Bader in the following thread. http://thread.gmane.org/gmane.linux.ide/48841 stable: applicable to 2.6.37 and 38. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NStefan Bader <stefan.bader@canonical.com> Cc: stable@kernel.org Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Tejun Heo 提交于
ATA_DFLAG_{H|D}IPM flags are no longer used. Kill them. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Linus Torvalds 提交于
The dentry hashing rules have been really quite complicated for a long while, in odd ways. That made functions like __d_drop() very fragile and non-obvious. In particular, whether a dentry was hashed or not was indicated with an explicit DCACHE_UNHASHED bit. That's despite the fact that the hash abstraction that the dentries use actually have a 'is this entry hashed or not' model (which is a simple test of the 'pprev' pointer). The reason that was done is because we used the normal 'is this entry unhashed' model to mark whether the dentry had _ever_ been hashed in the dentry hash tables, and that logic goes back many years (commit b3423415: "dcache: avoid RCU for never-hashed dentries"). That, in turn, meant that __d_drop had totally different unhashing logic for the dentry hash table case and for the anonymous dcache case, because in order to use the "is this dentry hashed" logic as a flag for whether it had ever been on the RCU hash table, we had to unhash such a dentry differently so that we'd never think that it wasn't 'unhashed' and wouldn't be free'd correctly. That's just insane. It made the logic really hard to follow, when there were two different kinds of "unhashed" states, and one of them (the one that used "list_bl_unhashed()") really had nothing at all to do with being unhashed per se, but with a very subtle lifetime rule instead. So turn all of it around, and make it logical. Instead of having a DENTRY_UNHASHED bit in d_flags to indicate whether the dentry is on the hash chains or not, use the hash chain unhashed logic for that. Suddenly "d_unhashed()" just uses "list_bl_unhashed()", and everything makes sense. And for the lifetime rule, just use an explicit DENTRY_RCUACCEES bit. If we ever insert the dentry into the dentry hash table so that it is visible to RCU lookup, we mark it DENTRY_RCUACCESS to show that it now needs the RCU lifetime rules. Now suddently that test at dentry free time makes sense too. And because unhashing now is sane and doesn't depend on where the dentry got unhashed from (because the dentry hash chain details doesn't have some subtle side effects), we can re-unify the __d_drop() logic and use common code for the unhashing. Also fix one more open-coded hash chain bit_spin_lock() that I missed in the previous chain locking cleanup commit. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-