Follow the usual naming pattern for functions. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f03f7195fb62b250847909e0972f69a151095529.1610127741.git.jani.nikula@intel.com

Add an "encoder reset" call to hide some more pps functions, and clean
up the callers. A minor functional change is not holding the pps lock
across the whole operation in intel_dp_encoder_reset, but instead doing
it in two steps.

v2: rename intel_pps_reinit to intel_pps_encoder_reset for clarity
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84a50f2700b19c6719cd3e1e931c64f1e2027551.1610127741.git.jani.nikula@intel.com

Add a new init call to be called only once, unlike some of the other
various init calls. This lets us hide more functions within
intel_pps.c. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/290865ed9b0ea79120222a24c233a2d596239076.1610127741.git.jani.nikula@intel.com

Add a locked version of intel_pps_vdd_off_sync_unlocked() that does
everything the callers expect it to. No functional changes.

v2: Fix typo (Anshuman)
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e722290208d827c5cae107fe41dbfe41a494793.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions, both for the prefix and
the _unlocked suffix for functions that expect the lock to be held when
calling. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d119605ba3d9c86647a524375de2d7e3d57a5676.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions. We don't need to repeat
"panel" here. No functional changes.

v2: Fix comment (Anshuman)
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b858271bd4d9c4a2ce15a13301d7bd9f7d121eb5.1610127741.git.jani.nikula@intel.com

Follow the usual naming pattern for functions. No functional changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9887e4e278ed9a20da064bbf1d0845e52b7c3b3d.1610127741.git.jani.nikula@intel.com

Start following the usual naming pattern for functions. No functional
changes.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e37623750c592c08720f3b340cf85862d0f0ca12.1610127741.git.jani.nikula@intel.com

In a long overdue refactoring, split out all panel sequencer code from
intel_dp.c to new intel_pps.[ch].

The first part is mostly just code movement as-is, without cleanups or
functional changes.

We need to add a vlv_get_dpll() helper to get at the vlv/chv dpll from
pps code.

v2: Rebase.
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14cc59d5734432ad976cd49ff8efce8fa413e5b2.1610127741.git.jani.nikula@intel.com

Always prefer the kernel types over stdint types in i915.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113141158.25513-1-jani.nikula@intel.com

skl_scaler_get_filter_select() isn't static and can't be inline.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113143726.19701-1-jani.nikula@intel.com

The DP PHY vswing/pre-emphasis level programming the driver does is
related to the DPTX -> first LTTPR link segment only. Accordingly it
should be only programmed when link training the first LTTPR and kept
as-is when training subsequent LTTPRs and the DPRX. For these latter
PHYs the vs/pe levels will be set in response to writing the
DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR
TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY).
The above is also described in DP Standard v2.0 under 3.6.6.1.

While at it simplify and add the LTTPR that is link trained to the debug
message in intel_dp_set_signal_levels().

Fixes: b30edfd8 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com

intel_dp_set_signal_levels() is needed for link training, so move it to
intel_dp_link_training.c.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-1-imre.deak@intel.com

Enable HDCP 2.2 MST support till Gen12.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-20-anshuman.gupta@intel.com

Authenticate and enable port encryption only once for
an active HDCP 2.2 session, once port is authenticated
and encrypted enable encryption for each stream that
requires encryption on this port.

Similarly disable the stream encryption for each encrypted
stream, once all encrypted stream encryption is disabled,
disable the port HDCP encryption and deauthenticate the port.

v2:
- Add connector details in drm_err. [Ram]
- 's/port_auth/hdcp_auth_status'. [Ram]
- Added a debug print for stream enc.
v3:
- uniformity for connector detail in DMESG. [Ram]

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-19-anshuman.gupta@intel.com

Add support for HDCP 2.2 DP MST shim callback.
This adds existing DP HDCP shim callback for Link Authentication
and Encryption and HDCP 2.2 stream encryption
callback.

v2:
- Added a WARN_ON() instead of drm_err. [Uma]
- Cosmetic changes. [Uma]
v3:
- 's/port_data/hdcp_port_data' [Ram]
- skip redundant link check. [Ram]
v4:
- use pipe instead of port to access HDCP2_STREAM_STATUS

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-18-anshuman.gupta@intel.com

Add HDCP 2.2 DP MST HDCP2_STREAM_STATUS
and HDCP2_AUTH_STREAM register in i915_reg header.

B.Spec: 21780
B.Spec: 14410
B.Spec: 50573

v2
- Modified naming convention of HDCP2_STREAM_STATUS
  for pre-gen12 platforms inline with B.Spec.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-17-anshuman.gupta@intel.com

This requires for HDCP 2.2 MST check link.
As for DP/HDMI shims check_2_2_link retrieves the connector
from dig_port, this is not sufficient or DP MST connector,
there can be multiple DP MST topology connector associated
with same dig_port.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-16-anshuman.gupta@intel.com

Add support for multiple mst stream in hdcp port data
which will be used by RepeaterAuthStreamManage msg and
HDCP 2.2 security f/w for m' validation.

Security f/w doesn't have any provision to mark the stream_type
for each stream separately, it just take single input of
stream_type while authenticating the port and applies the
same stream_type to all streams. So driver mark each stream_type
with common highest supported content type for all streams
in DP MST Topology.

Security f/w supports RepeaterAuthStreamManage msg and m'
validation only once during port authentication and encryption.
Though it is not compulsory, security fw should support dynamic
update of content_type and should support RepeaterAuthStreamManage
msg and m' validation whenever required.

v2:
- Init the hdcp port data k for HDMI/DP SST stream.
v3:
- Cosmetic changes. [Uma]
v4:
- 's/port_auth/hdcp_port_auth'. [Ram]
- Commit log improvement.
v5:
- Comment and commit log improvement. [Ram]
v6:
- Check first connector connected status before intel_encoder_is_mst
  to avoid any NULL pointer dereference.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Tested-by: NJuston Li <juston.li@intel.com>
Acked-by: NJuston Li <juston.li@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-15-anshuman.gupta@intel.com

Let's define Maximum MST content streams up to four
generically which can be supported by modern display
controllers.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-14-anshuman.gupta@intel.com

Fix the size of WIRED_REPEATER_AUTH_STREAM_REQ cmd buffer size.
It is based upon the actual number of MST streams and size
of wired_cmd_repeater_auth_stream_req_in.
Excluding the size of hdcp_cmd_header.

v2:
- hdcp_cmd_header size annotation nitpick. [Tomas]

Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Acked-by: NTomas Winkler <tomas.winkler@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-13-anshuman.gupta@intel.com

hdcp_port_data is specific to a port on which HDCP
encryption is getting enabled, so encapsulate it to
intel_digital_port.
This will be required to enable HDCP 2.2 stream encryption.

v2:
- 's/port_data/hdcp_port_data'. [Ram]

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-12-anshuman.gupta@intel.com

Pass dig_port as an argument to intel_hdcp_init()
and intel_hdcp2_init().
This will be required for HDCP 2.2 stream encryption.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-11-anshuman.gupta@intel.com

Enable HDCP 1.4 over DP MST for Gen12.

v2:
- Enable HDCP for <= Gen12 platforms. [Ram]
v3:
- Connector detials in debug msg. [Ram]

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-10-anshuman.gupta@intel.com

Enable HDCP 1.4 DP MST stream encryption.

Enable stream encryption once encryption is enabled on
the DP transport driving the link for each stream which
has requested encryption.

Disable stream encryption for each stream that no longer
requires encryption before disabling HDCP encryption on
the link.

v2:
- Added debug print for stream encryption.
- Disable the hdcp on port after disabling last stream
  encryption.
v3:
- Cosmetic change, removed the value less comment. [Uma]
v4:
- Split the Gen12 HDCP enablement patch. [Ram]
- Add connector details in drm_err.
v5:
- uniformity for connector detail in DMESG. [Ram]
- comments improvement. [Ram]

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-9-anshuman.gupta@intel.com

Both HDCP_{1.x,2.x} requires to select/deselect Multistream HDCP bit
in TRANS_DDI_FUNC_CTL in order to enable/disable stream HDCP
encryption over DP MST Transport Link.

HDCP 1.4 stream encryption requires to validate the stream encryption
status in HDCP_STATUS_{TRANSCODER,PORT} register driving that link
in order to enable/disable the stream encryption.

Both of above requirement are same for all Gen with respect to
B.Spec Documentation.

v2:
- Cosmetic changes function name, error msg print and
  stream typo fixes. [Uma]
v3:
- uniformity for connector detail in DMESG. [Ram]

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-8-anshuman.gupta@intel.com

DP MST stream encryption status requires time of a link frame
in order to change its status, but as there were some HDCP
encryption timeout observed earlier, it is safer to use
ENCRYPT_STATUS_CHANGE_TIMEOUT_MS timeout for stream status too,
it requires to move the macro to a header.
It will be used by both HDCP{1.x,2.x} stream status timeout.

Related: 'commit 7e90e8d0 ("drm/i915: Increase timeout for Encrypt
status change")'
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-7-anshuman.gupta@intel.com

Gen12 has H/W delta with respect to HDCP{1.x,2.x} display engine
instances lies in Transcoder instead of DDI as in Gen11.

This requires hdcp driver to use mst_master_transcoder for link
authentication and stream transcoder for stream encryption
separately.

This will be used for both HDCP 1.4 and HDCP 2.2 over DP MST
on Gen12.

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-6-anshuman.gupta@intel.com

There can be situation when DP MST connector is created without
mst modeset being done, in those cases connector->encoder will be
NULL. MST connector->encoder initializes after modeset.
Don't enable HDCP in such cases to prevent any crash.

Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Juston Li <juston.li@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-5-anshuman.gupta@intel.com

Handle CP_IRQ in DEVICE_SERVICE_IRQ_VECTOR_ESI0
It requires to call intel_hdcp_handle_cp_irq() in case
of CP_IRQ is triggered by a sink in DP-MST topology.

Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-4-anshuman.gupta@intel.com

Get DRM connector reference count while scheduling a prop work
to avoid any possible destroy of DRM connector when it is in
DRM_CONNECTOR_REGISTERED state.

Fixes: a6597faa ("drm/i915: Protect workers against disappearing connectors")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-3-anshuman.gupta@intel.com

When crtc state need_modeset is true it is not necessary
it is going to be a real modeset, it can turns to be a
fastset instead of modeset.
This turns content protection property to be DESIRED and hdcp
update_pipe left with property to be in DESIRED state but
actual hdcp->value was ENABLED.

This issue is caught with DP MST setup, where we have multiple
connector in same DP_MST topology. When disabling HDCP on one of
DP MST connector leads to set the crtc state need_modeset to true
for all other crtc driving the other DP-MST topology connectors.
This turns up other DP MST connectors CP property to be DESIRED
despite the actual hdcp->value is ENABLED.
Above scenario fails the DP MST HDCP IGT test, disabling HDCP on
one MST stream should not cause to disable HDCP on another MST
stream on same DP MST topology.

v2:
- Fixed connector->base.registration_state == DRM_CONNECTOR_REGISTERED
  WARN_ON.

v3:
- Commit log improvement. [Uma]
- Added a comment before scheduling prop_work. [Uma]

Fixes: 33f9a623 ("drm/i915/hdcp: Update CP as per the kernel internal state")
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Reviewed-by: NRamalingam C <ramalingam.c@intel.com>
Tested-by: NKarthik B S <karthik.b.s@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-2-anshuman.gupta@intel.com

DG1's vswing tables are the same for eDP and HDMI but have slight
differences from ICL/TGL for DP.

v2:
 - Use a "_hbr2_hbr3" suffix on the table name to make it more clear
   that the same table is used for both HBR2 and HBR3 link rates.
   (Swathi)

Bspec: 49291
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108222528.1954514-1-matthew.d.roper@intel.comReviewed-by: NClint Taylor <Clinton.A.Taylor@intel.com>

Some new eDP panels don't like to operate at the max parameters, and
instead we need to go for an optimal confiugration. That unfortunately
doesn't work with older eDP panels which are generally only guaranteed
to work at the max parameters.

To solve these two conflicting requirements let's start with the optimal
setup, and if that fails we start again with the max parameters. The
downside is probably an extra modeset when we switch strategies but
I don't see a good way to avoid that.

For a bit of history we first tried to go for the fast+narrow in
commit 7769db58 ("drm/i915/dp: optimize eDP 1.4+ link config
fast and narrow"). but that had to be reverted due to regression
on older panels in commit f11cb1c1 ("drm/i915/dp: revert back
to max link rate and lane count on eDP"). So now we try to get
the best of both worlds by using both strategies.

v2: Deal with output_bpp and uapi vs. hw state split
    Reword some comments
v3: Rebase

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105267
References: https://bugs.freedesktop.org/show_bug.cgi?id=109959
References: https://gitlab.freedesktop.org/drm/intel/issues/272Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com

Eliminate checkpatch warnings from intel_cursor.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'by'
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110175624.3524-2-ville.syrjala@linux.intel.comReviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>

There was some misinterpretation of specification, when DDIX_USED is
set, the next bit means 0 for DP and 1 for HDMI.

Anyways this misinterpretation is not causing any issues, this change
is just to comply with specification.
Also as for us it do not matters if it is HDMI or DP, not checking the
port type that HTI is using.

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108134802.21280-1-jose.souza@intel.com

The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.

The CPU mode takeover code added in commit 5b1ec9ac
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".

This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.

Fixes: 5b1ec9ac ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com

As with the regular suspend paths, also disable the wakeref assertions
as we disable the driver during shutdown.
Reported-by: NHans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899
Fixes: fe0f1e3b ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk

We need a power_domain wakeref in pps_{lock,unlock} to prevent
a race while resetting pps state in intel_power_sequencer_reset().

intel_power_sequencer_reset() need a pps_mutex to access pps_pipe
but it can't grab pps_mutex due to deadlock with power_well
functions are called while holding pps_mutex.
intel_power_sequencer_reset() is called by power_well function
associated with legacy platforms like vlv and chv therefore re-use
the POWER_DOMAIN_DISPLAY_CORE power domain, which only used
by vlv and chv display power domain.

This will avoids the unnecessary noise of unrelated power wells
in pps_{lock,unlock}.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107112500.16216-1-anshuman.gupta@intel.com

sync-up to not fall too much behind.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>