- 19 10月, 2011 3 次提交
-
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Stuge 提交于
Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard, and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger Interface Board. The ICDI board can also be used stand-alone, for other boards and chips than the kit it came with. The ICDI has both old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm pitch connector. Tested with EK-LM3S9B90, where the BD-ICDI board is included. Signed-off-by: NPeter Stuge <peter@stuge.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 05 10月, 2011 1 次提交
-
-
由 Hakan Kvist 提交于
Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban Signed-off-by: NHakan Kvist <hakan.kvist@sonyericsson.com> Signed-off-by: NOskar Andero <oskar.andero@sonyericsson.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 9月, 2011 1 次提交
-
-
由 Rigbert Hamisch 提交于
add device ID for "HP un2430 Mobile Broadband Module" Signed-off-by: NRigbert Hamisch <rigbert@gmx.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 9月, 2011 1 次提交
-
-
由 Eric Benoit 提交于
Add vendor and product ID for the SMART USB to serial adapter. These were meant to be used with their SMART Board whiteboards, but can be re-purposed for other tasks. Tested and working (at at least 9600 bps). Signed-off-by: NEric Benoit <eric@ecks.ca> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 21 9月, 2011 1 次提交
-
-
由 Richard Hartmann 提交于
Simple patch to make qcserial recognize the USB id of the Sierra Wireless MC8355 which is based on the Gobi 3000 chip. Both UMTS and GPS work fine. Signed-off-by: NRichard Hartmann <richih.mailinglist@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 9月, 2011 4 次提交
-
-
由 Dan Williams 提交于
IDs found in the Windows driver's ZTEusbnet.inf file from the ZTE MF100 drivers (O2 UK). Also fixes the ZTE MF626 device since it really is distinct from the 4G Systems stick and apparently needs the net interface blacklisted too, while there's no indication (yet) that the 4G Systems stick does. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
That's what the blacklist is for... Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
It's cleaner than the array stuff, and we're about to add a bunch more blacklist entries. Second, there are devices that need both the sendsetup and the reserved interface blacklists, which the current code can't accommodate. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 8月, 2011 1 次提交
-
-
由 Michał Sroczyński 提交于
Signed-off-by: NMichal Sroczynski <msroczyn@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 8月, 2011 1 次提交
-
-
Calao use on there dev kits a FT2232 where the port 0 is used for the JTAG and port 1 for the UART They use the same VID and PID as FTDI Chip but they program the manufacturer name in the eeprom So use this information to detect it Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Gregory Hermant <gregory.hermant@calao-systems.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 8月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
USB_SERIAL_IPW needs to select USB_SERIAL_WWAN to fix build errors: ipw.c:(.text+0x333841): undefined reference to `usb_wwan_close' ipw.c:(.text+0x3339e6): undefined reference to `usb_wwan_open' ipw.c:(.text+0x333bb9): undefined reference to `usb_wwan_release' drivers/built-in.o:(.data+0x29dac): undefined reference to `usb_wwan_startup' drivers/built-in.o:(.data+0x29db4): undefined reference to `usb_wwan_disconnect' drivers/built-in.o:(.data+0x29dd4): undefined reference to `usb_wwan_write' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 24 8月, 2011 1 次提交
-
-
由 Kuninori Morimoto 提交于
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 8月, 2011 5 次提交
-
-
由 Oliver Neukum 提交于
From 2d487c10136f76cf3705881d34868e8592839cfe Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oliver@neukum.org> Date: Tue, 12 Jul 2011 15:36:51 +0200 Subject: [PATCH] USB: ipw: convert to usb-wwan framework This patch allows the ipw driver to use the multibuffer infrastructure of usb-wwan. This improves speed. Signed-off-by: Oliver Neukum<oneukum@suse.de> Tested-by: NMichal Hybner <dta081@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
Currently the Option driver avoids binding interface 1 on Huawei K3765 and K4505 broadband modems as it should be handled by the cdc_ether driver instead. This patch ensures we don't bind the interface 2 on those devices as that is CDC_DATA. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Gavin.zhu 提交于
Signed-off-by: NGavin.zhu <gavin.kx@qq.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K4605 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by suitable network driver. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Signed-off-by: NAlex Chiang <achiang@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K3806 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Signed-off-by: NAlex Chiang <achiang@canonical.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 8月, 2011 2 次提交
-
-
由 Artur Zimmer 提交于
Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by: NArtur Zimmer <artur128@3dzimmer.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Florian Echtler 提交于
A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by: NFlorian Echtler <floe@butterbrot.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 8月, 2011 7 次提交
-
-
由 Vijay Chavan 提交于
A new device ID pair is added for Qualcomm Modem present in Sagemcom's HiLo3G module. Signed-off-by: NVijay Chavan <VijayChavan007@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K4511 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K4510 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K3771 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Bird 提交于
This patch adds the product ID of Huawei's Vodafone K3770 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: NAndrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Uwe Bonnes 提交于
usb: serial: ftdi_sio.c: For the FT232H FTDI_SIO_SET_BAUDRATE_REQUEST, index needs to be shifted too the recent addition of the FT232H showed that baudrate was set wrong. See gmane.linux.usb.general: "[ftdi_sio] FT232H support". With the old code, the MSB of the 4 encoded fractional divider bits and more important the clock predivider bits got lost. Adding the FT232H to the code patch were these bits are shifted solves the problem. I verified baud rates with a scope now. I suspect, that the BM device probably needs these bits shifted too. But there is no predivider bit, so this is not obvious, and a missing MSB of the encoded fractional divider only shifts the resulting baudrate minimal. The AM has only 3 bits of encoded fractional divider, so it is not impacted. I have no BM device to test, so I only added a comment and left the code for the BM untouched. Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ionut Nicu 提交于
Even if it's unlikely for this to cause an error, there is a typo in the code that uses the bitwise-AND operator instead of the logical one. Signed-off-by: NIonut Nicu <ionut.nicu@cloudbit.ro> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 7月, 2011 1 次提交
-
-
由 Wolfgang Denk 提交于
Add ID 4348:5523 for WinChipHead USB->RS 232 adapter with Prolifec PL2303 chipset Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 7月, 2011 1 次提交
-
-
由 Michał Sroczyński 提交于
PL2303: correctly handle baudrates above 115200 Signed-off-by: NMichal Sroczynski <msroczyn@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 6月, 2011 1 次提交
-
-
由 Uwe Bonnes 提交于
appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: NUwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 6月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
If the size of the firmware exceeds TI_FIRMWARE_BUF_SIZE we'll leak 'fw_p' by failing to call release_firmware(). This patch fixes the leak. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 6月, 2011 1 次提交
-
-
由 Steffen Sledz 提交于
E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: NSteffen Sledz <sledz@dresearch-fe.de> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 6月, 2011 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This reverts commit a559d2c8. Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc when the option driver tries to bind to it. So revert this as it doesn't seem to be needed at all. Thanks to Michael Tokarev and Paweł Drobek for working on resolving this issue. Cc: Paweł Drobek <pawel.drobek@gmail.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 6月, 2011 4 次提交
-
-
由 Torsten Hilbrich 提交于
The funtion option_send_status times out when sending USB messages to the interfaces 0, 1, and 2 of this UMTS stick. This results in a 5s timeout in the function causing other tty operations to feel very sluggish. This patch adds a blacklist entry for these 3 interfaces on the ZTE K3765-Z device. I was also able to reproduce the problem with v2.6.38 and v2.6.39. This is very similar to a problem fixed in commit 7a89e4cb Author: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Date: Wed Mar 9 09:19:48 2011 +0000 USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626 Signed-off-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
Simple ID addition. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
This modem really wants sendsetup blacklisted for interfaces 0 and 1, otherwise the kernel hardlocks for about 10 seconds while waiting for the modem's firmware to respond, which it of course doesn't do. A slight complication here is that TCT (who owns the Alcatel brand) used the same USB IDs for the X200 as the X060s despite the devices having completely different firmware and AT command sets, so we end up adding the X060s to the blacklist at the same time. PSA to OEMs: don't use the same USB IDs for different devices. Really. It makes your kittens cry. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Williams 提交于
Uses Longcheer-based firmware and AT command set. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-