Useful for diagnostics.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

So the code to suppress duplicate changes is effective.

Reported-by: Kyung Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.comyu@wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide robustness against low quality FLL sync clocks by increasing the
timeout for lock to an absurdly high point; we should never get anywhere
near hitting the timeout in a real system unless it is failing.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

For simplicity always run the DSP at the SYSCLK rate.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Turn off the ADSP memory when we aren't using it, saving a small amount of
power.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Merge branch 'topic/adsp' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona

Some ADSP devices can make use of DVFS to optimise power consumption
depending on the operating frequency of the DSP core. Implement
support for this in the generic ADSP code.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Both WM5102 and WM5110 support haptics, register the device.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide a haptics widget for use by the haptics driver and expose the DAPM
context for it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide a haptics widget for use by the haptics driver and expose the DAPM
context for it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The Arizona CODECs contain a haptics module providing vibration feedback
support. Implement basic support for this, providing simple start/stop and
signal magnitude control.

Since the output path for haptics is routed through the CODEC audio routing
it is modelled as a signal generator within ASoC, the haptics driver calls
DAPM to start and stop the output drivers. An appropriate output path must
be configured via ALSA to connect the haptics source to the correct output.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some other device functions need to integrate with signal sources in the
audio portion (primarily for haptics) so allow CODEC to export the DAPM
context by pointing to it from the core driver.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Otherwise we skip reenables.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some devices support higher clock rates, allow users to select these.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

It seems WM_ADSP2("DSP1", 0) is added twice to the widgets list, remove
that and in place use ARIZONA_DSP_WIDGETS(DSP1, "DSP1").

We need to make sure that the DSP1 Aux widgets are provided otherwise
we'll see errors such as "Failed to add route DSP1 Aux 1 -> DSP1" etc.
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

These are managed automatically in current revisions.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Linux 3.7-rc6

Conflicts:
	sound/soc/codecs/wm5102.c

Pull KVM fix from Marcelo Tosatti:
 "A correction for oops on module init with older Intel hosts."

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()

Merge misc fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches)
  revert "mm: fix-up zone present pages"
  tmpfs: change final i_blocks BUG to WARNING
  tmpfs: fix shmem_getpage_gfp() VM_BUG_ON
  mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address
  mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures"
  rapidio: fix kernel-doc warnings
  swapfile: fix name leak in swapoff
  memcg: fix hotplugged memory zone oops
  mips, arc: fix build failure
  memcg: oom: fix totalpages calculation for memory.swappiness==0
  mm: fix build warning for uninitialized value
  mm: add anon_vma_lock to validate_mm()

Revert commit 7f1290f2 ("mm: fix-up zone present pages")

That patch tried to fix a issue when calculating zone->present_pages,
but it caused a regression on 32bit systems with HIGHMEM.  With that
change, reset_zone_present_pages() resets all zone->present_pages to
zero, and fixup_zone_present_pages() is called to recalculate
zone->present_pages when the boot allocator frees core memory pages into
buddy allocator.  Because highmem pages are not freed by bootmem
allocator, all highmem zones' present_pages becomes zero.

Various options for improving the situation are being discussed but for
now, let's return to the 3.6 code.

Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Tested-by: NChris Clayton <chris2553@googlemail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Under a particular load on one machine, I have hit shmem_evict_inode()'s
BUG_ON(inode->i_blocks), enough times to narrow it down to a particular
race between swapout and eviction.

It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(),
and the lack of coherent locking between mapping's nrpages and shmem's
swapped count.  There's a window in shmem_writepage(), between lowering
nrpages in shmem_delete_from_page_cache() and then raising swapped
count, when the freed count appears to be +1 when it should be 0, and
then the asymmetry stops it from being corrected with -1 before hitting
the BUG.

One answer is coherent locking: using tree_lock throughout, without
info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on
used_blocks makes that messier than expected.  Another answer may be a
further effort to eliminate the weird shmem_recalc_inode() altogether,
but previous attempts at that failed.

So far undecided, but for now change the BUG_ON to WARN_ON: in usual
circumstances it remains a useful consistency check.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora
has converted to WARNING) in shmem_getpage_gfp():

  WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70()
  Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49
  Call Trace:
    warn_slowpath_common+0x7f/0xc0
    warn_slowpath_null+0x1a/0x20
    shmem_getpage_gfp+0xa5c/0xa70
    shmem_fault+0x4f/0xa0
    __do_fault+0x71/0x5c0
    handle_pte_fault+0x97/0xae0
    handle_mm_fault+0x289/0x350
    __do_page_fault+0x18e/0x530
    do_page_fault+0x2b/0x50
    page_fault+0x28/0x30
    tracesys+0xe1/0xe6

Thanks to Johannes for pointing to truncation: free_swap_and_cache()
only does a trylock on the page, so the page lock we've held since
before confirming swap is not enough to protect against truncation.

What cleanup is needed in this case? Just delete_from_swap_cache(),
which takes care of the memcg uncharge.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reported-by: NDave Jones <davej@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kmap_to_page returns the corresponding struct page for a virtual address
of an arbitrary mapping.  This works by checking whether the address
falls in the pkmap region and using the pkmap page tables instead of the
linear mapping if appropriate.

Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is
incorrectly treated as a highmem address and we can end up walking off
the end of pkmap_page_table and subsequently passing junk to pte_page.

This patch fixes the bound check to stay within the pkmap tables.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jiri Slaby reported the following:

	(It's an effective revert of "mm: vmscan: scale number of pages
	reclaimed by reclaim/compaction based on failures".) Given kswapd
	had hours of runtime in ps/top output yesterday in the morning
	and after the revert it's now 2 minutes in sum for the last 24h,
	I would say, it's gone.

The intention of the patch in question was to compensate for the loss of
lumpy reclaim.  Part of the reason lumpy reclaim worked is because it
aggressively reclaimed pages and this patch was meant to be a sane
compromise.

When compaction fails, it gets deferred and both compaction and
reclaim/compaction is deferred avoid excessive reclaim.  However, since
commit c6543459 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up
each time and continues reclaiming which was not taken into account when
the patch was developed.

Attempts to address the problem ended up just changing the shape of the
problem instead of fixing it.  The release window gets closer and while
a THP allocation failing is not a major problem, kswapd chewing up a lot
of CPU is.

This patch reverts commit 83fde0f2 ("mm: vmscan: scale number of
pages reclaimed by reclaim/compaction based on failures") and will be
revisited in the future.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Tested-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix rapidio kernel-doc warnings:

  Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local'
  Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region'
  Warning(include/linux/rio.h:290): No description found for parameter 'switches'
  Warning(include/linux/rio.h:290): No description found for parameter 'destid_table'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a name leak introduced by commit 91a27b2a ("vfs: define
struct filename and have getname() return it").  Add the missing
putname.

[akpm@linux-foundation.org: cleanup]
Signed-off-by: NXiaotian Feng <dannyfeng@tencent.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When MEMCG is configured on (even when it's disabled by boot option),
when adding or removing a page to/from its lru list, the zone pointer
used for stats updates is nowadays taken from the struct lruvec.  (On
many configurations, calculating zone from page is slower.)

But we have no code to update all the lruvecs (per zone, per memcg) when
a memory node is hotadded.  Here's an extract from the oops which
results when running numactl to bind a program to a newly onlined node:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000f60
  IP:  __mod_zone_page_state+0x9/0x60
  Pid: 1219, comm: numactl Not tainted 3.6.0-rc5+ #180 Bochs Bochs
  Process numactl (pid: 1219, threadinfo ffff880039abc000, task ffff8800383c4ce0)
  Call Trace:
    __pagevec_lru_add_fn+0xdf/0x140
    pagevec_lru_move_fn+0xb1/0x100
    __pagevec_lru_add+0x1c/0x30
    lru_add_drain_cpu+0xa3/0x130
    lru_add_drain+0x2f/0x40
   ...

The natural solution might be to use a memcg callback whenever memory is
hotadded; but that solution has not been scoped out, and it happens that
we do have an easy location at which to update lruvec->zone.  The lruvec
pointer is discovered either by mem_cgroup_zone_lruvec() or by
mem_cgroup_page_lruvec(), and both of those do know the right zone.

So check and set lruvec->zone in those; and remove the inadequate
attempt to set lruvec->zone from lruvec_init(), which is called before
NODE_DATA(node) has been allocated in such cases.

Ah, there was one exceptionr.  For no particularly good reason,
mem_cgroup_force_empty_list() has its own code for deciding lruvec.
Change it to use the standard mem_cgroup_zone_lruvec() and
mem_cgroup_get_lru_size() too.  In fact it was already safe against such
an oops (the lru lists in danger could only be empty), but we're better
proofed against future changes this way.

I've marked this for stable (3.6) since we introduced the problem in 3.5
(now closed to stable); but I have no idea if this is the only fix
needed to get memory hotadd working with memcg in 3.6, and received no
answer when I enquired twice before.
Reported-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using a cross-compiler to fix another issue, the following build error
occurred for mips defconfig:

  arch/mips/fw/arc/misc.c: In function 'ArcHalt':
  arch/mips/fw/arc/misc.c:25:2: error: implicit declaration of function 'local_irq_disable'

Fix it up by including irqflags.h.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

oom_badness() takes a totalpages argument which says how many pages are
available and it uses it as a base for the score calculation.  The value
is calculated by mem_cgroup_get_limit which considers both limit and
total_swap_pages (resp.  memsw portion of it).

This is usually correct but since fe35004f ("mm: avoid swapping out
with swappiness==0") we do not swap when swappiness is 0 which means
that we cannot really use up all the totalpages pages.  This in turn
confuses oom score calculation if the memcg limit is much smaller than
the available swap because the used memory (capped by the limit) is
negligible comparing to totalpages so the resulting score is too small
if adj!=0 (typically task with CAP_SYS_ADMIN or non zero oom_score_adj).
A wrong process might be selected as result.

The problem can be worked around by checking mem_cgroup_swappiness==0
and not considering swap at all in such a case.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_wp_page() sets mmun_called if mmun_start and mmun_end were
initialized and, if so, may call mmu_notifier_invalidate_range_end()
with these values.  This doesn't prevent gcc from emitting a build
warning though:

  mm/memory.c: In function `do_wp_page':
  mm/memory.c:2530: warning: `mmun_start' may be used uninitialized in this function
  mm/memory.c:2531: warning: `mmun_end' may be used uninitialized in this function

It's much easier to initialize the variables to impossible values and do
a simple comparison to determine if they were initialized to remove the
bool entirely.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Iterating over the vma->anon_vma_chain without anon_vma_lock may cause
NULL ptr deref in anon_vma_interval_tree_verify(), because the node in the
chain might have been removed.

  BUG: unable to handle kernel paging request at fffffffffffffff0
  IP: [<ffffffff8122c29c>] anon_vma_interval_tree_verify+0xc/0xa0
  PGD 4e28067 PUD 4e29067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU 0
  Pid: 9050, comm: trinity-child64 Tainted: G        W    3.7.0-rc2-next-20121025-sasha-00001-g673f98e-dirty #77
  RIP: 0010: anon_vma_interval_tree_verify+0xc/0xa0
  Process trinity-child64 (pid: 9050, threadinfo ffff880045f80000, task ffff880048eb0000)
  Call Trace:
    validate_mm+0x58/0x1e0
    vma_adjust+0x635/0x6b0
    __split_vma.isra.22+0x161/0x220
    split_vma+0x24/0x30
    sys_madvise+0x5da/0x7b0
    tracesys+0xe1/0xe6
  RIP  anon_vma_interval_tree_verify+0xc/0xa0
  CR2: fffffffffffffff0

Figured out by Bob Liu.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Bob Liu <lliubbo@gmail.com>
Signed-off-by: NMichel Lespinasse <walken@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>