Destroy_qp shall wait for any outstanding CQ notification to be
flushed out before proceeding with QP destroy. Flushing the WQ
before destroying the QP.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Moves the driver QP state to error in case of response completion
errors. Handles the scenarios which doesn't generate a terminal CQE.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The code determines if the next ring entry is valid before proceeding
further to read the rest of the entry. The CPU can re-order and read
the rest of the entry first, possibly reading a stale entry, if DMA
of a new entry happens right after reading it.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the driver is loaded it sets the default CCTI value to be 0. When the FM
starts and CCA is disabled the driver sets the max value to 65535 due the driver
subtracting 1 from 0 and the fact that the CCTI value is a u16.

Special case the subtraction to find the index for a 0 value.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pass only the lower 16Bits of an Extended LIDs to rvt_cq_entry
to avoid triggering a WARN_ON_ONCE during conversion there.
These upper 16Bits are okay to drop as they are obtained elsewhere.

Fixes: 62ede777 ("Add OPA extended LID support")
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When deciding to convert an OPA AH to IB we were incorrectly
including the IB multicast range. At this layer, all Extended
LIDs will be larger than IB_LID_PERMISSIVE. Change comparison
accordingly.

Fixes: d541e455 ("IB/core: Convert ah_attr from OPA to IB when copying to user")
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

On host shutdown, driver sends 'SMA_Disabled' as a reason
for link down. This is incorrect.

Send 'reboot' as a linkdown reason.
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It is invalid to change Link state from Init to Armed if
IsSmConfigurationStarted bit is not set in Attribute modifier
for Set subnet management method in case of PortInfo
and PortStateInfo attribute.
Set response MAD status field bits accordingly to react correctly
in such situations and avoid changing Link state.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NGrzegorz Morys <grzegorz.morys@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

OPA VNIC does not use PIO contexts and instead only uses SDMA
engines. Do not allocate PIO contexts for VNIC ports.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NNiranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A for loop condition of data_iovs in user_sdma_free_request
is unnecessarily repeated before the loop as an if check.

Remove the if enveloping the loop.
Reviewed-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The "2 * UINT_MAX"  statement:
	if ((u64)(ts - cce->timestamp) > 2 * UINT_MAX) {

is equivalent to:
	if ((u64)(ts - cce->timestamp) > UINT_MAX - 1) {

This results in a premature timeout of the cong log entry.

Fix by using unsigned 64 bit integers, removing casts, and using
an algebraic equivalent test to avoid the "2 * UINT_MAX" issue.

Also make use of kernel API to get nanoseconds instead of
open coding.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Wrapper functions were used to call the same function
mmu_notifier_mem_invalidate for 2 callbacks in
mmu_notifier.
The commit 7def96f0 ("IB/hfi1: update to new mmu_notifier semantic")
removed the invalidate_page callback.
Therefore, the wrapper function is no longer needed.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NKamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Timeout of 20 seconds is too long for active wait performed
for 8051 command completion. It was required for scenarios
when transition to polling was requested before offline.quiet
state was reached. Currently wait for offline.quiet is
properly implemented and timeout can be reduced to 1 second.
Reviewed-by: NDean Luick <dean.luick@intel.com>
Reviewed-by: NDuane McCrory <duane.mccrory@intel.com>
Signed-off-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

HFI's are hard-wired to send Device Info frames with
MgmtAllowed bit set to 0. This means in B2B setups,
MgmtAllowed would never be allowed, which prevents
remote opa management tools from working properly.

Assume MgmtAllowed if a neighbor is also an HFI.

Fixes: 98b9ee20 ("IB/hfi1: Cache neighbor secure data after link up")
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The use_srq configfs attribute is created after it is read. Hence
modify srpt_tpg_attrib_use_srq_store() such that this function
switches dynamically between non-SRQ and SRQ mode.
Reported-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Introduce the helper function srpt_set_enabled(). Protect
sport->enabled changes with sdev->mutex. Makes configfs writes
into 'enabled' wait until all channel resources have been freed.
Wait until channel release has finished during kernel module
unload.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Except for changing a BUG_ON() call into a WARN_ON_ONCE() call, this
patch does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The only functional change in this patch is in the srpt_add_one()
error path: if allocating the ring buffer for the SRQ fails, fall
back to non-SRQ mode instead of disabling SRP target functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

IB and iWARP specs both spell out that posting a receive work request
to a queue pair in the RESET state is an invalid operation and required
to fail.  Postpone posting receive work requests until after the
transition to the INIT state.

Fixes: commit dea26209 ("IB/srpt: Change default behavior from using SRQ to using RC")
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

iw_cxgb4 has many BUG_ON()s that were left over from various enhancemnets
made over the years.  Almost all of them should just be removed.  Some,
however indicate a ULP usage error and can be handled w/o bringing down
the system.

If the condition cannot happen with correctly implemented cxgb4 sw/fw,
then remove the BUG_ON.

If the condition indicates a misbehaving ULP (like CQ overflows), add
proper recovery logic.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

While adding a new gid, the driver currently does not return the context
back to the stack. A subsequent del_gid() (e.g, when ip address is changed)
doesn't find the right context in the driver and it ends up dropping that
request. This results in the HW caching a stale gid entry and traffic fails
because of that. Fix by returning the proper context in bnxt_re_add_gid().
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In bnxt_qplib_process_qp_event(), for qp error events we look up the
qp-handle and pass it for further processing. But we don't check if the
handle is NULL. This could lead to a crash in the called functions when
that qp-handle is dereferenced, if the qp is destroyed in the meantime.
Fix this by checking for a valid qp-handle in that function.
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Struct mlx5_ib_striding_rq_caps was not aligned to 64 bit as
it should have been. Add a 32 bit reserved field.

Fixes: b4f34597 ('IB/mlx5: Expose multi-packet RQ capabilities')
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Since there is nothing done with non zero return value, such check is
avoided.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Maximal message should be used as a limit to the max message payload allowed,
without the headers. The ConnectX-3 check is done against this value includes
the headers. When the payload is 4K this will cause the NIC to drop packets.

Increase maximal message to 8K as workaround, this shouldn't change current
behaviour because we continue to set the MTU to 4k.

To reproduce;
set MTU to 4296 on the corresponding interface, for example:
ifconfig eth0 mtu 4296 (both server and client)

On server:
ib_send_bw -c UD -d mlx4_0 -s 4096 -n 1000000 -i1 -m 4096

On client:
ib_send_bw -d mlx4_0 -c UD <server_ip> -s 4096 -n 1000000 -i 1 -m 4096

Fixes: 6e0d733d ("IB/mlx4: Allow 4K messages for UD QPs")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Taking advantage of the optimization which was introduced in previous
commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the
MTT usage for QP and CQ.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Optimize the device performance by assigning multiple physical pages,
which are contiguous, to a single MTT. As a result, the number of MTTs
is reduced and in turn save cache misses of MTTs.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When working over a RoCE network, the UDP source port should be set only
for statically connected QPs (RC, UC and XRC).

Fixes: 2811ba51 ("IB/mlx5: Add RoCE fields to Address Vector")
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The UMR's QP is created by calling mlx5_ib_create_qp directly, and
therefore the send CQ and the recv CQ on the ibqp weren't assigned.

Assign them right after calling the mlx5_ib_create_qp to assure
that any access to those pointers will work as expected and won't
crash the system as might happen as part of reset flow.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Smatch tool reports the following error:
  drivers/infiniband/hw/cxgb4/qp.c:1886
	c4iw_create_qp() error: we previously assumed 'ucontext'
	could be null (see line 1804)

Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The Broadcom driver produces the following compilation warning

drivers/infiniband/hw/bnxt_re/ib_verbs.c:
	In function ‘bnxt_re_create_ah’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:668:6:
	warning: variable ‘vlan_tag’ set but not used [-Wunused-but-set-variable]
	u16 vlan_tag;

Let's remove it till vlan_tag will be implemented properly.

Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add the PCI write end padding flag to device_cap_flags enum and set it
during mlx5_ib_query_device so it will be reported to user-space.

During WQ/QP creation, set that capability for WQ/QP if user requested
it and HW supports it.

PCI write end padding modification is not supported for now. There's no
such flag for a QP but for a WQ, create and modify use the same flag.
Return an error if PCI write end padding flag is set during modify_wq.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There are root complexes that are able to optimize their
performance when incoming data is multiple full cache lines.

PCI write end padding is the device's ability to pad the ending of
incoming packets (scatter) to full cache line such that the last
upstream write generated by an incoming packet will be a full cache
line.

Add a relevant entry to ib_device_cap_flags to report such capability
of an RDMA device.

Add the QP and WQ create flags:
 * A QP/WQ created with a scatter end padding flag will cause
   HW to pad the last upstream write generated by a packet to cache line.

User should consider several factors before activating this feature:
- In case of high CPU memory load (which may cause PCI back pressure in
  turn), if a large percent of the writes are partial cache line, this
  feature should be checked as an optional solution.
- This feature might reduce performance if most packets are between one
  and two cache lines and PCIe throughput has reached its maximum
  capacity. E.g. 65B packet from the network port will lead to 128B
  write on PCIe, which may cause traffic on PCIe to reach high
  throughput.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Following crash happens, if crc algorithm couldn't be allocated:

[ 1087.989072] rdma_rxe: loaded
[ 1097.855397] PCLMULQDQ-NI instructions are not detected.
[ 1097.901220] rdma_rxe: failed to allocate crc algorithmi err:-2
[ 1097.901248] BUG: unable to handle kernel
[ 1097.901249] NULL pointer dereference
[ 1097.901250]  at 0000000000000046
[...]

Reason is that rxe->tfm is assigned the error return, which will then
be used for crypto_free_shash() in rxe_cleanup. Fix by using a
temporary variable and assigning it rxe->tfm after allocation succeeded.

Fixes: cee2688e ("IB/rxe: Offload CRC calculation when possible")
Signed-off-by: NThomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Below kernel crash is observed when Pkey security enforcement fails on
received MADs. This issue is reported in [1].

ib_free_recv_mad() accesses the rmpp_list, whose initialization is
needed before accessing it.
When security enformcent fails on received MADs, MAD processing avoided
due to security checks failed.

OpenSM[3770]: SM port is down
kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
kernel: IP: ib_free_recv_mad+0x44/0xa0 [ib_core]
kernel: PGD 0
kernel: P4D 0
kernel:
kernel: Oops: 0002 [#1] SMP
kernel: CPU: 0 PID: 2833 Comm: kworker/0:1H Tainted: P          IO    4.13.4-1-pve #1
kernel: Hardware name: Dell       XS23-TY3        /9CMP63, BIOS 1.71 09/17/2013
kernel: Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
kernel: task: ffffa069c6541600 task.stack: ffffb9a729054000
kernel: RIP: 0010:ib_free_recv_mad+0x44/0xa0 [ib_core]
kernel: RSP: 0018:ffffb9a729057d38 EFLAGS: 00010286
kernel: RAX: ffffa069cb138a48 RBX: ffffa069cb138a10 RCX: 0000000000000000
kernel: RDX: ffffb9a729057d38 RSI: 0000000000000000 RDI: ffffa069cb138a20
kernel: RBP: ffffb9a729057d60 R08: ffffa072d2d49800 R09: ffffa069cb138ae0
kernel: R10: ffffa069cb138ae0 R11: ffffa072b3994e00 R12: ffffb9a729057d38
kernel: R13: ffffa069d1c90000 R14: 0000000000000000 R15: ffffa069d1c90880
kernel: FS:  0000000000000000(0000) GS:ffffa069dba00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000000000008 CR3: 00000011f51f2000 CR4: 00000000000006f0
kernel: Call Trace:
kernel:  ib_mad_recv_done+0x5cc/0xb50 [ib_core]
kernel:  __ib_process_cq+0x5c/0xb0 [ib_core]
kernel:  ib_cq_poll_work+0x20/0x60 [ib_core]
kernel:  process_one_work+0x1e9/0x410
kernel:  worker_thread+0x4b/0x410
kernel:  kthread+0x109/0x140
kernel:  ? process_one_work+0x410/0x410
kernel:  ? kthread_create_on_node+0x70/0x70
kernel:  ? SyS_exit_group+0x14/0x20
kernel:  ret_from_fork+0x25/0x30
kernel: RIP: ib_free_recv_mad+0x44/0xa0 [ib_core] RSP: ffffb9a729057d38
kernel: CR2: 0000000000000008

[1] : https://www.spinics.net/lists/linux-rdma/msg56190.html

Fixes: 47a2b338 ("IB/core: Enforce security on management datagrams")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reported-by: NChris Blake <chrisrblake93@gmail.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Chelsio cxgb4 HW is big-endian, hence there is need to properly
annotate r2 and stag fields as __be32 and not __u32 to fix the
following sparse warnings.

  drivers/infiniband/hw/cxgb4/qp.c:614:16:
    warning: incorrect type in assignment (different base types)
      expected unsigned int [unsigned] [usertype] r2
      got restricted __be32 [usertype] <noident>
  drivers/infiniband/hw/cxgb4/qp.c:615:18:
    warning: incorrect type in assignment (different base types)
      expected unsigned int [unsigned] [usertype] stag
      got restricted __be32 [usertype] <noident>

Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the modify QP handler the base_qpn_udp field in the RSS QPC is
overwrite later by irrelevant value assignment. Hence, ingress packets
which gets to the RSS QP will be steered then to a garbage QPN.

The patch fixes this by skipping the above assignment when a RSS QP is
modified, also, the RSS context's attributes assignments are relocated
just before the context is posted to avoid future issues like this.

Additionally, this patch takes the opportunity to change the code to be
disciplined to the device's manual and assigns the RSS QP context just at
RESET to INIT transition.

Fixes:3078f5f1 ("IB/mlx4: Add support for RSS QP")
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The mlx4's RSS patches submission missed a report of RSS capabilities
which should be reported by the vendor channel in query_device.
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The RDMA/umem uses generic RB-trees macros to generate various ib_umem
access functions. The generation is performed with INTERVAL_TREE_DEFINE
macro, which allows one of two modes: declare all functions as static or
declare none of the function to be static.

The second mode of operation produces the following sparse errors:
 drivers/infiniband/core/umem_rbtree.c:69:1:
	warning: symbol 'rbt_ib_umem_iter_first' was not declared.
	Should it be static?
 drivers/infiniband/core/umem_rbtree.c:69:1:
	warning: symbol 'rbt_ib_umem_iter_next' was not declared.
	Should it be static?

Code relocation together with declaration of such functions to be
"static" solves the issue.

Because there is no need to have separate file for two functions,
let's consolidate umem_rtree.c and umem_odp.c into one file.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The cmd_sn field of CQ doorbell inits for 0. It should be
increment on each first db rung after a completion Event.
if the cmd_sn of notify doorbell Adjacent two times is the
same, the hardware will distinguish it for the same notify
request and update its type according to the priority level
of next event and solicited event.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>