Rename add_range() to add_bus_range() to avoid conflict with the
naming of the generic range manipulation functions.

LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-tiny-usb: Fix on big-endian systems

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Fix struct _lowcore layout.
  [S390] qdio: prevent call trace if CHPID is offline
  [S390] qdio: continue polling for buffer state ERROR

* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PIT: control word is write-only
  kvmclock: count total_sleep_time when updating guest clock
  Export the symbol of getboottime and mmonotonic_to_bootbased

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: clean up memory allocation in at32_add_device_mci
  arch/avr32: Fix build failure for avr32 caused by typo

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix address masking bug in hpte_need_flush()

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix dentry hash calculation for case-insensitive mounts
  [CIFS] Don't cache timestamps on utimes due to coarse granularity
  [CIFS] Maximum username length check in session setup does not match
  cifs: fix length calculation for converted unicode readdir names
  [CIFS] Add support for TCP_NODELAY

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  drivers/net: Correct NULL test
  MAINTAINERS: networking drivers - Add git net-next tree
  net/sched: Fix module name in Kconfig
  cxgb3: fix GRO checksum check
  dst: call cond_resched() in dst_gc_task()
  netfilter: nf_conntrack: fix hash resizing with namespaces
  netfilter: xtables: compat out of scope fix
  netfilter: nf_conntrack: restrict runtime expect hashsize modifications
  netfilter: nf_conntrack: per netns nf_conntrack_cachep
  netfilter: nf_conntrack: fix memory corruption with multiple namespaces
  Bluetooth: Keep a copy of each HID device's report descriptor
  pktgen: Fix freezing problem
  igb: make certain to reassign legacy interrupt vectors after reset
  irda: add missing BKL in irnet_ppp ioctl
  irda: unbalanced lock_kernel in irnet_ppp
  ixgbe: Fix return of invalid txq
  ixgbe: Fix ixgbe_tx_map error path
  netxen: protect resource cleanup by rtnl lock
  netxen: fix tx timeout recovery for NX2031 chip
  Bluetooth: Enter active mode before establishing a SCO link.
  ...

Commit f71dc176 'Make
hpte_need_flush() correctly mask for multiple page sizes' introduced
bug, which is triggered when a kernel with a 64k base page size is run
on a system whose hardware does not 64k hash PTEs.  In this case, we
emulate 64k pages with multiple 4k hash PTEs, however in
hpte_need_flush() we incorrectly only mask the hardware page size from
the address, instead of the logical page size.  This causes things to
go wrong when we later attempt to iterate through the hardware
subpages of the logical page.

This patch corrects the error.  It has been tested on pSeries bare
metal by Michael Neuling.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* 'for-linus' of git://neil.brown.name/md:
  md: fix some lockdep issues between md and sysfs.
  md: fix 'degraded' calculation when starting a reshape.

======
This fix is related to
    http://bugzilla.kernel.org/show_bug.cgi?id=15142
but does not address that exact issue.
======

sysfs does like attributes being removed while they are being accessed
(i.e. read or written) and waits for the access to complete.

As accessing some md attributes takes the same lock that is held while
removing those attributes a deadlock can occur.

This patch addresses 3 issues in md that could lead to this deadlock.

Two relate to calling flush_scheduled_work while the lock is held.
This is probably a bad idea in general and as we use schedule_work to
delete various sysfs objects it is particularly bad.

In one case flush_scheduled_work is called from md_alloc (called by
md_probe) called from do_md_run which holds the lock.  This call is
only present to ensure that ->gendisk is set.  However we can be sure
that gendisk is always set (though possibly we couldn't when that code
was originally written.  This is because do_md_run is called in three
different contexts:
  1/ from md_ioctl.  This requires that md_open has succeeded, and it
     fails if ->gendisk is not set.
  2/ from writing a sysfs attribute.  This can only happen if the
     mddev has been registered in sysfs which happens in md_alloc
     after ->gendisk has been set.
  3/ from autorun_array which is only called by autorun_devices, which
     checks for ->gendisk to be set before calling autorun_array.
So the call to md_probe in do_md_run can be removed, and the check on
->gendisk can also go.


In the other case flush_scheduled_work is being called in do_md_stop,
purportedly to wait for all md_delayed_delete calls (which delete the
component rdevs) to complete.  However there really isn't any need to
wait for them - they have already been disconnected in all important
ways.

The third issue is that raid5->stop() removes some attribute names
while the lock is held.  There is already some infrastructure in place
to delay attribute removal until after the lock is released (using
schedule_work).  So extend that infrastructure to remove the
raid5_attrs_group.

This does not address all lockdep issues related to the sysfs
"s_active" lock.  The rest can be address by splitting that lockdep
context between symlinks and non-symlinks which hopefully will happen.
Signed-off-by: NNeilBrown <neilb@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix p9_client_destroy unconditional calling v9fs_put_trans
  9p: fix memory leak in v9fs_parse_options()
  9p: Fix the kernel crash on a failed mount
  9p: fix option parsing
  9p: Include fsync support for 9p client
  net/9p: fix statsize inside twstat
  net/9p: fail when user specifies a transport which we can't find
  net/9p: fix virtio transport to correctly update status on connect

PIT control word (address 0x43) is write-only, reads are undefined.

Cc: stable@kernel.org
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Current kvm wallclock does not consider the total_sleep_time which could cause
wrong wallclock in guest after host suspend/resume. This patch solve
this issue by counting total_sleep_time to get the correct host boot time.

Cc: stable@kernel.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Export getboottime and monotonic_to_bootbased in order to let them
could be used by following patch.

Cc: stable@kernel.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Offsets and sizes are wrong for 32 bit.
Got broken with 866ba284 "[S390] cleanup lowcore.h".
Reported-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If a CHPID is offline during a device shutdown the ccw_device_halt|clear
may fail and the qdio device stays in state STOPPED until the shutdown is
finished. If an interrupt occurs before the device is set to INACTIVE
the STOPPED state triggers a WARN_ON in the interrupt handler.
Prevent this WARN_ON by catching the STOPPED state in the interrupt
handler.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Inbound traffic handling may hang if next buffer to check is in
state ERROR, polling is stopped and the final check for further
available inbound buffers disregards buffers in state ERROR.
This patch includes state ERROR when checking availability of
more inbound buffers.

Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Test the value that was just allocated rather than the previously tested one.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@

if (x == NULL || ...) {
    ... when forall
    return ...; }
... when != goto l;
    when != x = e
    when != &x
*x == NULL
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the rc period, patches that are not bugfixes
should be done using the net-next tree.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The action modules have been prefixed with 'act_', but the Kconfig
description was not changed.
Signed-off-by: NJan Luebbe <jluebbe@debian.org>
Acked-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Verify the HW checksum state for frames handed to GRO processing.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This code was written long ago when it was not possible to
reshape a degraded array.  Now it is so the current level of
degraded-ness needs to be taken in to account.  Also newly addded
devices should only reduce degradedness if they are deemed to be
in-sync.

In particular, if you convert a RAID5 to a RAID6, and increase the
number of devices at the same time, then the 5->6 conversion will
make the array degraded so the current code will produce a wrong
value for 'degraded' - "-1" to be precise.

If the reshape runs to completion end_reshape will calculate a correct
new value for 'degraded', but if a device fails during the reshape an
incorrect decision might be made based on the incorrect value of
"degraded".

This patch is suitable for 2.6.32-stable and if they are still open,
2.6.31-stable and 2.6.30-stable as well.

Cc: stable@kernel.org
Reported-by: NMichael Evans <mjevans1983@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux:
  Revert "nfsd4: fix error return when pseudoroot missing"

restructure client create code to handle error cases better and
only cleanup initialized portions of the stack.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@us.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2/cluster: Make o2net connect messages KERN_NOTICE
  ocfs2/dlm: Fix printing of lockname
  ocfs2: Fix contiguousness check in ocfs2_try_to_merge_extent_map()
  ocfs2/dlm: Remove BUG_ON in dlm recovery when freeing locks of a dead node
  ocfs2: Plugs race between the dc thread and an unlock ast message
  ocfs2: Remove overzealous BUG_ON during blocked lock processing
  ocfs2: Do not downconvert if the lock level is already compatible
  ocfs2: Prevent a livelock in dlmglue
  ocfs2: Fix setting of OCFS2_LOCK_BLOCKED during bast
  ocfs2: Use compat_ptr in reflink_arguments.
  ocfs2/dlm: Handle EAGAIN for compatibility - v2
  ocfs2: Add parenthesis to wrap the check for O_DIRECT.
  ocfs2: Only bug out when page size is larger than cluster size.
  ocfs2: Fix memory overflow in cow_by_page.
  ocfs2/dlm: Print more messages during lock migration
  ocfs2/dlm: Ignore LVBs of locks in the Blocked list
  ocfs2/trivial: Remove trailing whitespaces
  ocfs2: fix a misleading variable name
  ocfs2: Sync max_inline_data_with_xattr from tools.
  ocfs2: Fix refcnt leak on ocfs2_fast_follow_link() error path

If match_strdup() fail this function exits without freeing the options string.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@us.ibm.com>
Sigend-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The patch fix the crash repoted below

[   15.149907] BUG: unable to handle kernel NULL pointer dereference at 00000001
[   15.150806] IP: [<c140b886>] p9_virtio_close+0x18/0x24
.....
....
[   15.150806] Call Trace:
[   15.150806]  [<c1408e78>] ? p9_client_destroy+0x3f/0x163
[   15.150806]  [<c1409342>] ? p9_client_create+0x25f/0x270
[   15.150806]  [<c1063b72>] ? trace_hardirqs_on+0xb/0xd
[   15.150806]  [<c11ed4e8>] ? match_token+0x64/0x164
[   15.150806]  [<c1175e8d>] ? v9fs_session_init+0x2f1/0x3c8
[   15.150806]  [<c109cfc9>] ? kmem_cache_alloc+0x98/0xb8
[   15.150806]  [<c1063b72>] ? trace_hardirqs_on+0xb/0xd
[   15.150806]  [<c1173dd1>] ? v9fs_get_sb+0x47/0x1e8
[   15.150806]  [<c1173dea>] ? v9fs_get_sb+0x60/0x1e8
[   15.150806]  [<c10a2e77>] ? vfs_kern_mount+0x81/0x11a
[   15.150806]  [<c10a2f55>] ? do_kern_mount+0x33/0xbe
[   15.150806]  [<c10b40b9>] ? do_mount+0x654/0x6b3
[   15.150806]  [<c1038949>] ? do_page_fault+0x0/0x284
[   15.150806]  [<c10b28ec>] ? copy_mount_options+0x73/0xd2
[   15.150806]  [<c10b4179>] ? sys_mount+0x61/0x94
[   15.150806]  [<c14284e9>] ? syscall_call+0x7/0xb
....
[   15.203562] ---[ end trace 1dd159357709eb4b ]---
[
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

Kernel bugzilla #15239

On some workloads, it is quite possible to get a huge dst list to
process in dst_gc_task(), and trigger soft lockup detection.

Fix is to call cond_resched(), as we run in process context.
Reported-by: NPawel Staszewski <pstaszewski@itcare.pl>
Tested-by: NPawel Staszewski <pstaszewski@itcare.pl>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Options pointer is being moved before calling kfree() which seems
to cause problems.  This uses a separate pointer to track and free
original allocation.
Signed-off-by: NVenkateswararao Jujjuri <jvrao@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>w

Implement the fsync in the client side by marking stat field values to 'don't touch' so that server may 
interpret it as a request to guarantee that the contents of the associated file are committed to stable 
storage before the Rwstat message is returned.

Without this patch, calling fsync on a 9p file results in "Invalid argument" error. Please check the attached 
C program.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> 
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> 
Acked-by: NVenkateswararao Jujjuri (JV) <jvrao@linux.vnet.ibm.com>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix ondemand to not request targets outside policy limits
  [CPUFREQ] Fix use after free of struct powernow_k8_data
  [CPUFREQ] fix default value for ondemand governor

Connect and disconnect messages are more than informational as they are required
during root cause analysis for failures. This patch changes them from KERN_INFO
to KERN_NOTICE.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Acked-by: NMark Faseh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

The debug call printing the name of the lock resource was chopping
off the last character. This patch fixes the problem.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Acked-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

Commit f39bde24 fixed the error return from PUTROOTFH in the
case where there is no pseudofilesystem.

This is really a case we shouldn't hit on a correctly configured server:
in the absence of a root filehandle, there's no point accepting version
4 NFS rpc calls at all.

But the shared responsibility between kernel and userspace here means
the kernel on its own can't eliminate the possiblity of this happening.
And we have indeed gotten this wrong in distro's, so new client-side
mount code that attempts to negotiate v4 by default first has to work
around this case.

Therefore when commit f39bde24 arrived at roughly the same
time as the new v4-default mount code, which explicitly checked only for
the previous error, the result was previously fine mounts suddenly
failing.

We'll fix both sides for now: revert the error change, and make the
client-side mount workaround more robust.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

stat structures contain a size prefix.  In our twstat messages
we were including the size of the size prefix in the prefix, which is not
what the protocol wants, and Inferno servers would complain.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

If the user specifies a transport and we can't find it, we failed back
to the default trainsport silently.  This patch will make the code
complain more loudly and return an error code.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>

The 9p virtio transport was not updating its connection status correctly
preventing it from being able to mount the server.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>