Fulfill the implementations for DriverSmuConfig setting on Sienna_Cichlid.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fulfill the implementations for DriverSmuConfig setting on Navi1x.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
pm sysfs should be writable in one VF mode as is in passthrough

[how]
do not remove write access on pm sysfs if device is in one VF mode

Fixes: 11c9cc95 ("amdgpu/pm: Make sysfs pm attributes as read-only for VFs")
Signed-off-by: NYiqing Yao <yiqing.yao@amd.com>
Reviewed-by: NMonk Liu <Monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Some ASICs, with the PMFW default settings, we may see the
power consumption reported via metrics table is "Very Erratic".
With the socket power alpha filter set as 10/100ms, we can correct
that issue.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will make it easier to add new firmwares in the future.
Reviewed-by: NGuchun Chen <guchun.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Clang static analysis reports this problem
amdgpu_ctx.c:616:26: warning: Assigned value is garbage
  or undefined
  args->out.pstate.flags = stable_pstate;
                         ^ ~~~~~~~~~~~~~
amdgpu_ctx_stable_pstate can fail without setting
stable_pstate.  So check.

Fixes: 8cda7a4f ("drm/amdgpu/UAPI: add new CTX OP to get/set stable pstates")
Signed-off-by: NTom Rix <trix@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For DCN3/3.01/3.02 at least these use the fpu.

v2: squash in build fix for when DCN is not enabled (Leo)
Signed-off-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
In LTTPR non-transparent mode, we need
to reset the cached lane settings before performing
link training on the next PHY repeater. Otherwise,
the cached lane settings will be used for the next
clock recovery e.g. VS = MAX (3) which should not be
the case according to the DP specs. We expect to use
minimum lane settings on each clock recovery sequence.

[how]
Reset DPCD and HW lane settings on each repeater LT.
Set training pattern to 0 for the repeater that failed LT
at the proper place.
Reviewed-by: NMeenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NJasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: NSung Joon Kim <sungkim@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SDMA 5.2.x queues are required to be mapped and unmapped from the extended
engines.
Signed-off-by: NJonathan Kim <jonathan.kim@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The KFD only unmaps all queues, all dynamics queues or all process queues
since RUN_LIST is mapped with all KFD queues.

There's no need to provide a single type unmap so remove this option.
Signed-off-by: NJonathan Kim <jonathan.kim@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch handles the GPU recovery failure in sriov environment by
retrying the reset if the first reset fails. To determine the condition
of retry, a new macro AMDGPU_RETRY_SRIOV_RESET is added which returns
true if failure is due to ETIMEDOUT, EINVAL or EBUSY, otherwise return
false.A new macro AMDGPU_MAX_RETRY_LIMIT is used to limit the retry to 2.

It also handles the return status in Post Asic Reset by updating the return
code with asic_reset_res and eventually return the return code in
amdgpu_job_timedout().
Signed-off-by: NSurbhi Kakarya <surbhi.kakarya@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

print more error info when deferred uncorrectable ras error

changed from V1:
    move Defferred error msg into query uncorrectable error
    count function.
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the 2nd parameter should be smu msg type rather than asic msg index.

Fixes: 7d38d9dc ("drm/amdgpu: add mode2 reset support for yellow carp")
Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com>
Acked-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Merge amdgpu_ras_late_init/amdgpu_ras_late_fini to amdgpu_ras_block_late_init/amdgpu_ras_block_late_fini

1. Merge amdgpu_ras_late_init to
   amdgpu_ras_block_late_init.
2. Remove amdgpu_ras_late_init since no ras block
   calls amdgpu_ras_late_init.
3. Merge amdgpu_ras_late_fini to
   amdgpu_ras_block_late_fini.
4. Remove amdgpu_ras_late_fini since no ras block
   calls amdgpu_ras_late_fini.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In order to reduce redundant struct conversion, modify
operating sysfs and interrupt function interface parameters.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_xgmi_ras_late_init/amdgpu_xgmi_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_umc_ras_late_init/amdgpu_umc_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_sdma_ras_late_init/amdgpu_sdma_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_nbio_ras_late_init/amdgpu_nbio_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_mmhub_ras_late_init/amdgpu_mmhub_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_mca_ras_late_init/amdgpu_mca_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_hdp_ras_late_init/amdgpu_hdp_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Optimize amdgpu_gfx_ras_late_init/amdgpu_gfx_ras_fini function code.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Define amdgpu_ras_block_late_init to create sysfs nodes
   and interrupt handles.
2. Define amdgpu_ras_block_late_fini to remove sysfs nodes
   and interrupt handles.
3. Replace ras block variable members in struct
   amdgpu_ras_block_object with struct ras_common_if, which
   can make it easy to associate each ras block instance
   with each ras block functional interface.
4. Add .ras_cb to struct amdgpu_ras_block_object.
5. Change each ras block to fit for the changement of struct
   amdgpu_ras_block_object.
Signed-off-by: Nyipechai <YiPeng.Chai@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

rlcg legacy read is not available in SRIOV configration.
Otherwise, gmc_v9_0_flush_gpu_tlb will always complain
timeout and finally breaks driver load.

v2: bypass read in amdgpu_virt_get_rlcg_reg_access_flag (from Victor)

Fixes: 97d1a3b9 ("drm/amdgpu: switch to get_rlcg_reg_access_flag for gfx9")
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NVictor Skvortsov <Victor.Skvortsov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add missing parameters to fix a kerneldoc warning
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A bunch of errors and warnings are leftover KFD over the years, attempt
to fix the errors and most warnings reported by checkpatch tool. Still a
few warnings remain which may be false positives so ignore them for now.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update the SPDX License header for all the KFD files.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add IP discovery data in sysfs. The format is:
/sys/class/drm/cardX/device/ip_discovery/die/D/B/I/<attrs>
where,
X is the card ID, an integer,
D is the die ID, an integer,
B is the IP HW ID, an integer, aka block type,
I is the IP HW ID instance, an integer.
<attrs> are the attributes of the block instance. At the moment these
include HW ID, instance number, major, minor, revision, number of base
addresses, and the base addresses themselves.

A symbolic link of the acronym HW ID is also created, under D/, if you
prefer to browse by something humanly accessible.

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Tom StDenis <tom.stdenis@amd.com>
Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix few kerneldoc warnings and one typo.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Avoid spam the kernel log on application memory allocation failures.
__func__ argument was also removed from dev_fmt macro due to
parameter conflicts with dynamic_dev_dbg.
Signed-off-by: NAlex Sierra <alex.sierra@amd.com>
Reviewed-by: NPhilip Yang <Philip.Yang@amd.comi>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the warning: no previous prototype for 'get_process_num_bos'
[-Wmissing-prototypes]
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix checkpatch reported warning for a quoted line and block line
comments.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the UMC_STATUS register is not linear, adjust offset
calculation formula to get correct address
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
SDMA ring buffer test failed if suspend is aborted during
S0i3 resume.

[How]
If suspend is aborted for some reason during S0i3 resume
cycle, it follows SDMA ring test failing and errors in amdgpu
resume. For RN/CZN/Picasso, SMU saves and restores SDMA
registers during S0ix cycle. So, skipping SDMA suspend and
resume from driver solves the issue. This time, the system
is able to resume gracefully even the suspend is aborted.
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

KMD reports a warning on holding a lock from drm_syncobj_find_fence,
when running amdgpu_test case “syncobj timeline test”.

ctx->lock was designed to prevent concurrent "amdgpu_ctx_wait_prev_fence"
calls and avoid dead reservation lock from GPU reset. since no reservation
lock is held in latest GPU reset any more, ctx->lock can be simply removed
and concurrent "amdgpu_ctx_wait_prev_fence" call also can be prevented by
PD root bo reservation lock.

call stacks:
=================
//hold lock
amdgpu_cs_ioctl->amdgpu_cs_parser_init->mutex_lock(&parser->ctx->lock);
…
//report warning
amdgpu_cs_dependencies->amdgpu_cs_process_syncobj_timeline_in_dep \
->amdgpu_syncobj_lookup_and_add_to_sync -> drm_syncobj_find_fence \
-> lockdep_assert_none_held_once
…
amdgpu_cs_ioctl->amdgpu_cs_parser_fini->mutex_unlock(&parser->ctx->lock);
Signed-off-by: NKen Xue <Ken.Xue@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The OOB table error count info should be reset after reset
eeprom table
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NTao Zhou <tao.zhou1@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable the support for DriverSmuConfig table on Navi1x and
Sienna_Cichlid.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Correct the UMD pstate profiling clocks for Dimgrey Cavefish and Beige
Goby.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

   (v4)
     Modifications to satisfy checkpatch --strict
   (v3)
     Rewrote patchset to order patches as (API, hw impl, usecase)

     - modified amdgpu_get_pp_od_clk_voltage to try
       amdgpu_dpm_emit_clock_levels and fallback to
       amdgpu_dpm_print_clock_levels if emit is not implemented.
     - modified amdgpu_get_pp_dpm_clock to try
       amdgpu_dpm_emit_clock_levels and fallback to
       amdgpu_dpm_print_clock_levels if emit is not implemented.
     - Newline is printed to buf if no output produced

 == Test ==
 LOGFILE=pp_clk.test.log
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display"  > $LOGFILE
 FILES="pp_od_clk_voltage
 pp_dpm_sclk
 pp_dpm_mclk
 pp_dpm_pcie
 pp_dpm_socclk
 pp_dpm_fclk
 pp_dpm_dcefclk
 pp_dpm_vclk
 pp_dpm_dclk "

 for f in $FILES
 do
   echo === $f === >> $LOGFILE
   cat $HWMON_DIR/device/$f >> $LOGFILE
 done
 cat $LOGFILE
Signed-off-by: NDarren Powell <darren.powell@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>