DECON(Display and Enhancement Controller) is new IP replacing FIMD in
Exynos5433. This patch adds Exynos5433 decon driver.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch is a preparation patch for adding support for Exynos5433
DECON. Exynos7 DECON have to be distinguished from Exynos5433 DECON.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Every CRTC drivers in Exynos DRM implements the code which checks
whether IOMMU is supported or not, and if supported enable it.
Making new helper for it generalize each CRTC drivers.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Without this dependency, Kbuild is confused and the configs below
them are not placed under Exynos DRM. This patch fixes it, so the
configs below them become to be placed under Exynos DRM.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This dependency is a historical thing. It is added when this DP driver is
under media subsystem. Now because it is under Exynos DRM, this dependency
is not needed anymore.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch resolves the issue that refresh rate got low
at extension mode test with fimd and vidi combination.

The problem was because atomic_commit callback waited
for the completion of vblank to gaurantee crtc relevant
registers are updated from shadow registers to real ones.

However, the waiting there is really unnecessary because
page flip operation does already it.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The field 'vma' of 'exynos_drm_gem_obj' structure was introduced in
2a3098ff ("drm/exynos: add userptr feature for g2d module") but is
not referenced anywhere.

One instance of 'exynos_drm_gem_obj' may be mapped to multiple
user-space VMAs so 'vma' field does not look useful anyway.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch resolves page fault issue with iommu and atomic feature
when modetest test application is terminated.

ENWIN_F field of WINCONx register enables or disable a dma channel to
each hardware overlay - the value of the field will be updated to real
register after vsync.

So this patch makes sure the dma channel is disabled by waiting for vsync
one time after clearing shadow registers to all dma channels.

Below shows the page fault issue:
setting mode 720x1280-60Hz@XR24 on connectors 31, crtc 29
freq: 59.99Hz

[   34.831025] PAGE FAULT occurred at 0x20400000 by 11e20000.sysmmu(Page
		table base: 0x6e324000)
[   34.838072]  Lv1 entry: 0x6e92dc01
[   34.841489] ------------[ cut here ]------------
[   34.846058] kernel BUG at drivers/iommu/exynos-iommu.c:364!
[   34.851614] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[   34.857428] Modules linked in:
<--snip-->
[   35.210894] [<c02880d0>] (exynos_sysmmu_irq) from [<c00608f8>]
(handle_irq_event_percpu+0x78/0x134)
[   35.219914] [<c00608f8>] (handle_irq_event_percpu) from [<c00609f0>]
(handle_irq_event+0x3c/0x5c)
[   35.228768] [<c00609f0>] (handle_irq_event) from [<c0063698>]
(handle_level_irq+0xc4/0x13c)
[   35.237101] [<c0063698>] (handle_level_irq) from [<c005ff7c>]
(generic_handle_irq+0x2c/0x3c)
[   35.245521] [<c005ff7c>] (generic_handle_irq) from [<c02214ec>]
(combiner_handle_cascade_irq+0x94/0x100)
[   35.254980] [<c02214ec>] (combiner_handle_cascade_irq) from
[<c005ff7c>] (generic_handle_irq+0x2c/0x3c)
[   35.264353] [<c005ff7c>] (generic_handle_irq) from [<c0060248>]
(__handle_domain_irq+0x7c/0xec)
[   35.273034] [<c0060248>] (__handle_domain_irq) from [<c0009434>]
(gic_handle_irq+0x30/0x68)
[   35.281366] [<c0009434>] (gic_handle_irq) from [<c0012ec0>]
(__irq_svc+0x40/0x74)
Signed-off-by: NInki Dae <inki.dae@samsung.com>

DRM Exynos driver is relying on dma-mapping internal structures when used
with IOMMU enabled. This patch partially hides dma-mapping internal things
by using proper get_dma_ops/set_dma_ops calls.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds code, which detach sub-device nodes from default iommu
domain if such has been configured. This lets Exynos DRM driver to properly
attach sub-devices to its own, common for all sub-devices domain.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

One should not do any assumptions on the stare of the fimd hardware
during driver initialization, so to properly reset fimd before enabling
IOMMU, one should ensure that all power domains and clocks are really
enabled. This patch adds pm_runtime and clocks management in the
fimd_clear_channel() function to ensure that any access to fimd
registers will be performed with clocks and power domains enabled.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

When the fimd is disabled by fimd_disable(), enabled overlay layers also
are disabled. If clocks for fimd are enabled by fimd_enable() on this
case, it can lead IOMMU page fault. The reason is that VIDCON0_ENVID and
VIDCON0_ENVID_F bits of VIDCON0 register are set still even though fimd
is disabled, so it may continue display output of prior when clocks for
fimd are enabled again.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

With atomic modesetting all the control for CRTC, Planes, Encoders and
Connectors should come from DRM core, so the driver is not allowed to
enable or disable planes from inside the crtc_enable()/disable() call.

But it needs to disable planes with crtc_disable in exynos driver
internally. Because crtc is disabled before plane is disabled, it means
plane_disable just returns without any register changes, then we cannot
be sure setting register to disable plane when crtc is disable.

This patch removes this chainned calls to enable plane from exynos hw
drivers code letting only DRM core touch planes except to disable plane.
Also it leads eliminable enabled and resume of struct exynos_drm_plane.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The reason waiting vblank is to be power gated and disabled clocks after
dma operation is completed. The dma operation is stopped already before
be power gated and clocks are disabled when mixer is disabled by commit
381be025("drm/exynos: stop mixer before gating clocks during
poweroff"). Don't need to wait vblank anymore.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

FIMC & GSC driver can calculate the offset of planes. So there are
use cases which IPP receives just one GEM handle of an image with
multiple plane. This patch extends ipp_validate_mem_node() to validate
this case.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Config depends on the opreation. So it must be referenced by an
operation id, not a property id.
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

exynos_dsi_host_transfer() can be called through a panel driver while
DSI is turning down. It is possible because the function checks only
whether DSI is initialized or not, and there is a moment which DSI is
set by uninitialized, but DSI is still turning down. To prevent it,
DSI must be set by disabled before starting to be turned down, and
exynos_dsi_host_transfer() must check whether DSI is enabled or not.

Kernel dump:
[ 4721.351448] Unhandled fault: synchronous external abort (0x96000210) at 0xffffff800015e018
[ 4721.351809] Internal error: : 96000210 [#1] PREEMPT SMP
[ 4721.352031] Modules linked in:
[ 4721.352173] CPU: 2 PID: 300 Comm: deviced Tainted: G        W       4.0.4-01017-g7964a87 #1
[ 4721.353989] Hardware name: Samsung DRACO board (DT)
[ 4721.358852] task: ffffffc0a0b70000 ti: ffffffc0a00ec000 task.ti: ffffffc0a00ec000
[ 4721.366327] PC is at exynos_dsi_enable_lane+0x14/0x5c
[ 4721.371353] LR is at exynos_dsi_host_transfer+0x834/0x8d8
[ 4721.376731] pc : [<ffffffc000432bcc>] lr : [<ffffffc000434590>] pstate: 60000145
[ 4721.384107] sp : ffffffc0a00efbe0
[ 4721.387405] x29: ffffffc0a00efbe0 x28: ffffffc0a00ec000
[ 4721.392699] x27: ffffffc000968000 x26: 0000000000000040
[ 4721.397994] x25: ffffffc000f74dc0 x24: ffffffc0a00efec8
[ 4721.403290] x23: ffffffc0a4815400 x22: ffffffc0009f2729
[ 4721.408584] x21: ffffffc0a00efcc8 x20: ffffffc0a4a2a848
[ 4721.413879] x19: ffffffc0a4a2a818 x18: 0000000000000004
[ 4721.419173] x17: 0000007faa5cddf0 x16: ffffffc0001a40a8
[ 4721.424469] x15: 0000000000000009 x14: 000000000000000d
[ 4721.429762] x13: 6e6e6f63206b726f x12: 0000000000000010
[ 4721.435058] x11: 0101010101010101 x10: 0000000000000000
[ 4721.440353] x9 : 000000000000000a x8 : 8386838282818381
[ 4721.445648] x7 : ffffffc0a201efe8 x6 : 0000000000000000
[ 4721.450943] x5 : 00000000fffffffa x4 : ffffffc0a201f170
[ 4721.456237] x3 : ffffff800015e000 x2 : ffffff800015e018
[ 4721.461531] x1 : 000000000000000f x0 : ffffffc0a4a2a818
[ 4721.466826]
[ 4721.468305] Process deviced (pid: 300, stack limit = 0xffffffc0a00ec028)
[ 4721.474989] Stack: (0xffffffc0a00efbe0 to 0xffffffc0a00f0000)
[ 4721.480720] fbe0: a00efca0 ffffffc0 0042c944 ffffffc0 a0f2d680 ffffffc0 00000024 00000000
[ 4721.488895] fc00: a4b6d000 ffffffc0 009f2729 ffffffc0 a4815400 ffffffc0 a00efec8 ffffffc0
Signed-off-by: NHyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

SoC checking code is not necessary anymore, as exynos_drm_match_add and
exynos_drm_platform_probe already properly handles situation when there are
no Exynos DRM components.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Tested-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In case there are multiple pipelines and deferred probe occurs, only components
of the first pipeline were bound. As a result only one pipeline was available.
The main cause of this issue was dynamic generation of component match table -
every component driver during probe registered itself on helper list, if there
was at least one pipeline present on this list component match table were
created without deferred components.
This patch removes this helper list, instead it creates match table from
existing devices requiring exynos_drm KMS drivers. This way match table do not
depend on probe/deferral order and contains all KMS components.
As a side effect patch makes the code cleaner and significantly smaller.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Code registering different drivers and simple platform devices was dispersed
across multiple sub-modules. This patch moves it to one place. As a result
initialization code is shorter and cleaner and should simplify further
development.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Check error and call DRM_ERROR if clk_prepare_enable() fails.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch makes one of Linux framebuffer and DRM CRTC drivers
to be enabled.

Display controllers, FIMD and DECON, can be controlled by Linux
framebuffer or DRM CRTC drivers so only one of them should be
enabled.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

This patch removes unnsed varables in vidi_disable function.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>

To follow more closely the new atomic API we split the dpms()
helper into the enable() and disable() helper to get exactly the
same semantics.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The planes are already disabled by the drm_atomic_helper_commit() code
so we don't need to disable the in these two places.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Run dpms operations through the atomic intefaces. This basically removes
the .dpms() callback from econders and crtcs and use .disable() and
.enable() to turn the crtc on and off.

v2: Address comments by Joonyoung:
	- make hdmi code call ->disable() instead of ->dpms()
	- do not use WARN_ON on crtc enable/disable

v3: - Fix build failure after the hdmi change in v2
    - Change dpms helper of ptn3460 bridge

v4: - remove win_commit() call from .enable()

v5: - move .atomic_check() to the atomic PageFlip patch, and transform it
in .atomic_begin()
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

exynos needs to update planes with the crtc enabled (mainly for the FIMD
case) so this specific atomic commit changes the order of
drm_atomic_helper_commit_modeset_enables() and
drm_atomic_helper_commit_planes() to commit planes after we enable crtc
and encoders.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This is a preparation commit to move exynos_drm_crtc_disable() together
with the future exynos_drm_crtc_enable() that will come from the split of
exynos_drm_crtc_dpms() callback.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Everything starts disabled so we don't really need to disable anything.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Now that no one is using the functions exported by exynos_drm_plane due
to the atomic conversion we can make remove some of the them or make them
static.

v2: remove unused exynos_drm_crtc

v3: fix checkpatch error (reported by Joonyoung)
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

PageFlips now use the atomic helper to work through the atomic modesetting
API. Async page flips are not supported yet.

v2: Add .atomic_begin() step to handle the vblank part we removed from
exynos page_flip code.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Now that phase 1 and 2 are complete switch .set_config helper to
use the atomic one.

v2: also remove .prepare() callback

v3: remove .mode_set() and .mode_set_base() and encoder's
.prepare() callbacks
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Now that phase 1 and 2 are complete we can switch the update/disable_plane
callbacks to their atomic version.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Use drm_atomic_set_fb_for_plane() in the legacy page_flip path to keep
track of the framebuffer pointer and reference.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Set CRTC, planes and connectors to use the default implementations from
the atomic helper library. The helpers will work to keep track of state
for each DRM object.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Handle changes by removing copy from adjusted_mode to mode as using
adjusted_mode of crtc_state.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The new atomic infrastructure needs the .mode_set_nofb() callback to
update CRTC timings before setting any plane.

v2: remove WARN_ON(!crtc->state) from mode_set_nofb
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The atomic helper to disable planes also uses the optional
.atomic_disable() helper. The unique operation it does is calling
.win_disable()
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Rip out the check from exynos_update_plane() and create
exynos_check_plane() for the check phase enabling use to use
the atomic helpers to call our check and update phases when updating
planes.

Update all users of exynos_update_plane() accordingly to call
exynos_check_plane() before.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>y
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The exynos_update_plane function needs 16.16 fixed point source data.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>