Various file systems use clear_page() and copy_page(), so when they're
built as modules we get build errors like the following:

ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined!
ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined!

Therefore export these functions to modules from metag_ksyms.c to fix
the errors. This was hit by a randconfig build.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Various file systems indirectly use metag_code_cache_flush_all(), so
when they're built as modules we get build errors like the following:

ERROR: "metag_code_cache_flush_all" [fs/xfs/xfs.ko] undefined!

Therefore export this function to modules to fix the errors. This was
hit by a randconfig build.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Rename setup_txprivext() to setup_priv() and add initialisation of some
more per-thread privilege protection registers:

 - TxPRIVSYSR: 0x04400000-0x047fffff
               0x05000000-0x07ffffff
               0x84000000-0x87ffffff
 - TxPIOREG:   0x02000000-0x02ffffff
               0x04800000-0x048fffff
 - TxSYREG:    0x04000000-0x04000fff (except write fetch system event)
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Define PRIV_BITS using explicit constants from <asm/metag_regs.h> rather
than with a hard coded value. This also adds a couple of missing
definitions for the TXPRIVEXT priv bits for protecting writes to TXTIMER
and the trace registers.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Sort includes in kernel/setup.c.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf
tools can be built for Meta.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

Add boot time check for whether LNKGET/LNKSET go through or around the
cache. Depending on the configuration an info message (no harm), warning
(technically wrong but no harm), or big WARN (expect failure in either
kernel or userland) may be emitted if the behaviour is not as expected:

Configuration                                Hardware   Response
------------------------------------------   --------   --------
AROUND_CACHE                                 through    pr_info
!AROUND_CACHE && ATOMICITY_LNKGET            around     WARN (kernel)
     "        && !ATOMICITY_LNKGET && SMP    around     WARN (user)
     "                   "         && !SMP   around     pr_warn
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

metag_cache_probe() is only called from setup_arch(), so add the __init
attribute to it.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add basic JTAG Debug Adapter (DA) support so that drivers which
communicate with the DA can detect whether one is actually present
(otherwise the target will halt indefinitely).

This allows the metag_da TTY driver and imgdafs filesystem driver to be
built, updates defconfigs, and sets up the metag_da console early if
it's configured in.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Adapt checkstack.pl so that it works for metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add ftrace support for metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>

Add Perf support for metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

Add metag build infrastructure.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add [!]METAG to a couple of Kconfig dependencies in lib/Kconfig.debug.
Don't allow stack utilization instrumentation on metag, and allow
building with frame pointers.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paul.mckenney@linaro.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>

Commit cc2383ec ("mm: introduce
arch-specific vma flag VM_ARCH_1") merged in v3.7-rc1.

The above commit combined several arch-specific vma flags into one, and
in the process it changed the VM_GROWSUP definition to depend on
specific architectures rather than CONFIG_STACK_GROWSUP. Therefore add
an ifdef for CONFIG_METAG to also set VM_GROWSUP.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mm@kvack.org

Add the remaining metag header files:
 - byteorder.h, swab.h (byte order and swapping)
 - barrier.h, cpu.h. hwthread.h, processor.h (hardware thread related)
 - bug.h, elf.h, gpio.h, linkage.h, resource.h (other)
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add stack unwinding support for metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add optimised library functions for metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add DMA mapping code.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add SMP support for metag. This allows Linux to take control of multiple
hardware threads on a single Meta core, treating them as separate Linux
CPUs.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add basic metag documentation. This includes an outline description of
the ABIs (including syscall ABI) and calling conventions, similar to the
one in Documentation/frv/.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Rob Landley <rob@landley.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: linux-doc@vger.kernel.org

Add header files to implement Meta hardware thread locks (used by some
other atomic operations), atomics, spinlocks, and bitops.

There are 2 main types of atomic primitives for metag (in addition to
IRQs off on UP):
 - LOCK instructions provide locking between hardware threads.
 - LNKGET/LNKSET instructions provide load-linked/store-conditional
   operations allowing for lighter weight atomics on Meta2

LOCK instructions allow for hardware threads to acquire voluntary or
exclusive hardware thread locks:
 - LOCK0 releases exclusive and voluntary lock from the running hardware
   thread.
 - LOCK1 acquires the voluntary hardware lock, blocking until it becomes
   available.
 - LOCK2 implies LOCK1, and additionally acquires the exclusive hardware
   lock, blocking all other hardware threads from executing.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add metag system call and gateway page interfaces. The metag
architecture port uses the generic system call numbers from
asm-generic/unistd.h, as well as a user gateway page mapped at
0x6ffff000 which contains fast atomic primitives (depending on SMP) and
a fast method of accessing TLS data.

System calls use the SWITCH instruction with the immediate 0x440001 to
signal a system call.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Meta core internal interrupts (from HWSTATMETA and friends) are vectored
onto the TR1 core trigger for the current thread. This is demultiplexed
in irq-metag.c to individual Linux IRQs for each internal interrupt.

External SoC interrupts (from HWSTATEXT and friends) are vectored onto
the TR2 core trigger for the current thread. This is demultiplexed in
irq-metag-ext.c to individual Linux IRQs for each external SoC interrupt.
The external irqchip has devicetree bindings for configuring the number
of irq banks and the type of masking available.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Dom Cobley <popcornmix@gmail.com>
Cc: Simon Arlott <simon@fire.lp0.eu>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org

Add core IRQ handling for metag. The code in irq.c exposes the TBX
signal numbers as Linux IRQs.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add trap code for metag. At the lowest level Meta traps (and return from
interrupt instruction - RTI) simply swap the PC and PCX registers and
optionally toggle the interrupt status bit (ISTAT). Low level TBX code
in tbipcx.S handles the core context save, determine the TBX signal
number based on the core trigger that fired (using the TXSTATI status
register), and call TBX signal handlers (mostly in traps.c) via a vector
table.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>

Add time keeping code for metag. Meta hardware threads have 2 timers.
The background timer (TXTIMER) is used as a free-running time base, and
the interrupt timer (TXTIMERI) is used for the timer interrupt. Both
counters traditionally count at approximately 1MHz.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>

The ptrace interface for metag provides access to some core register
sets using the PTRACE_GETREGSET and PTRACE_SETREGSET operations. The
details of the internal context structures is abstracted into user API
structures to both ease use and allow flexibility to change the internal
context layouts. Copyin and copyout functions for these register sets
are exposed to allow signal handling code to use them to copy to and
from the signal context.

struct user_gp_regs (NT_PRSTATUS) provides access to the core general
purpose register context.

struct user_cb_regs (NT_METAG_CBUF) provides access to the TXCATCH*
registers which contains information abuot a memory fault, unaligned
access error or watchpoint. This can be modified to alter the way the
fault is replayed on resume ("catch replay"), or to prevent the replay
taking place.

struct user_rp_state (NT_METAG_RPIPE) provides access to the state of
the Meta read pipeline which can be used to hide memory latencies in
hand optimised data loops.

Extended DSP register state, DSP RAM, and hardware breakpoint registers
aren't yet exposed through ptrace.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>

Add device tree files to arch/metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NVineet Gupta <vgupta@synopsys.com>

Add signal handling code for metag.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>

Add some TCM support
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add huge TLB support to the metag architecture.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Meta has instructions for accessing:
 - bytes        - GETB (1 byte)
 - words        - GETW (2 bytes)
 - doublewords  - GETD (4 bytes)
 - longwords    - GETL (8 bytes)

All accesses must be aligned. Unaligned accesses can be detected and
made to fault on Meta2, however it isn't possible to fix up unaligned
writes so we don't bother fixing up reads either.

This patch adds metag memory handling code including:
 - I/O memory (io.h, ioremap.c): Actually any virtual memory can be
   accessed with these helpers. A part of the non-MMUable address space
   is used for memory mapped I/O. The ioremap() function is implemented
   one to one for non-MMUable addresses.
 - User memory (uaccess.h, usercopy.c): User memory is directly
   accessible from privileged code.
 - Kernel memory (maccess.c): probe_kernel_write() needs to be
   overwridden to use the I/O functions when doing a simple aligned
   write to non-writecombined memory, otherwise the write may be split
   by the generic version.

Note that due to the fact that a portion of the virtual address space is
non-MMUable, and therefore always maps directly to the physical address
space, metag specific I/O functions are made available (metag_in32,
metag_out32 etc). These cast the address argument to a pointer so that
they can be used with raw physical addresses. These accessors are only
to be used for accessing fixed core Meta architecture registers in the
non-MMU region, and not for any SoC/peripheral registers.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add memory management files for metag.

Meta's 32bit virtual address space is split into two halves:
 - local (0x08000000-0x7fffffff): traditionally local to a hardware
   thread and incoherent between hardware threads. Each hardware thread
   has it's own local MMU table. On Meta2 the local space can be
   globally coherent (GCOn) if the cache partitions coincide.
 - global (0x88000000-0xffff0000): coherent and traditionally global
   between hardware threads. On Meta2, each hardware thread has it's own
   global MMU table.

The low 128MiB of each half is non-MMUable and maps directly to the
physical address space:
 - 0x00010000-0x07ffffff: contains Meta core registers and maps SoC bus
 - 0x80000000-0x87ffffff: contains low latency global core memories

Linux usually further splits the local virtual address space like this:
 - 0x08000000-0x3fffffff: user mappings
 - 0x40000000-0x7fffffff: kernel mappings
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add cache and TLB handling code for metag, including the required
callbacks used by MM switches and DMA operations. Caches can be
partitioned between the hardware threads and the global space, however
this is usually configured by the bootloader so Linux doesn't make any
changes to this configuration. TLBs aren't configurable, so only need
consideration to flush them.

On Meta1 the L1 cache was VIVT which required a full flush on MM switch.
Meta2 has a VIPT L1 cache so it doesn't require the full flush on MM
switch. Meta2 can also have a writeback L2 with hardware prefetch which
requires some special handling. Support is optional, and the L2 can be
detected and initialised by Linux.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add source files from the Thread Binary Interface (TBI) library which
provides useful low level operations and traps/context management.

Among other things it handles interrupt/exception/syscall entry (in
tbipcx.S).
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>

Add the main header for the Thread Binary Interface (TBI) library which
provides useful low level operations and trap/context management.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>