Pull regmap updates from Mark Brown:
 "The main update this time around is the addition of a standard DT
  binding for specifying the endianness of devices.  This allows drivers
  to support any endianness of device register map without any code,
  useful for configurable IP blocks.

  There's also a few bug fixes that I didn't get round to sending, none
  of them terribly severe or new, and a reduction in size for struct
  regmap"

* tag 'regmap-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix debugfs-file 'registers' mode
  regmap: fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: debugfs: fix possbile NULL pointer dereference
  regmap: fix NULL pointer dereference in _regmap_write/read
  regmap: fix NULL pointer dereference in regmap_get_val_endian
  regmap: cache: Do not fail silently from regcache_sync calls
  regmap: change struct regmap's internal locks as union
  regmap: Split regmap_get_endian() in two functions
  regmap: of_regmap_get_endian() cleanup
  regmap: Fix DT endianess parsing logic
  regmap: Add explicit dependencies to catch "select" misuse
  regmap: Restore L: linux-kernel@vger.kernel.org entry
  regmap: Add the DT binding documentation for endianness
  regmap: add DT endianness binding support.

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.18 development
  series:

   - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin
     controllers.

   - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x,
     APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik.

   - Push Freescale drivers down into their own subdirectory.

   - Assorted sprays of syntax and semantic fixes"

* tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: specify bindings for pins and groups
  pinctrl: nomadik: improve GPIO debug prints
  pinctrl: abx500: refactor DT parser to take two paths
  pinctrl: abx500: use helpers for map allocation/free
  pinctrl: alter device tree bindings for functions
  pinctrl: nomadik: refactor DT parser to take two paths
  pinctrl: nomadik: use utils map free function
  pinctrl: nomadik: use util function to reserve maps
  pinctrl: qcom: use restart_notifier mechanism for ps_hold
  pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation
  pinctrl: berlin: fix the dt_free_map function
  pinctrl: at91: disable PD or PU before enabling PU or PD
  pinctrl: st: remove gpiochip in failure cases
  pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add
  pinctrl: at91: Fix failure path in at91_gpio_probe path
  pinctrl: lantiq: Release gpiochip resources in fail case
  pinctrl: imx: detect uninitialized pins
  pinctrl: tegra: Add MIPI pad control
  pinctrl: at91: Switch to using managed clk_get
  pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges
  ...

Pull EDAC fixes from Borislav Petkov:
 "Misc small fixes/improvements accumulated from the summer months,
  nothing earth-shattering.

  The mpc85xx_edac fix is tagged for stable but since it got confirmed
  only days before the final 3.17 release, I didn't rush a last minute
  pull request to you.  I hope that's ok as it will trickle down to
  stable anyway and we'll make sure it lands in 3.17-stable too"

* tag 'edac_for_3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  mpc85xx_edac: Make L2 interrupt shared too
  amd64_edac: Modify usage of amd64_read_dct_pci_cfg()
  ppc4xx_edac: Fix build error caused by wrong member access
  EDAC: Fix mem_types strings type

Pull dmaengine updates from Dan Williams:
 "Even though this has fixes marked for -stable, given the size and the
  needed conflict resolutions this is 3.18-rc1/merge-window material.

  These patches have been languishing in my tree for a long while.  The
  fact that I do not have the time to do proper/prompt maintenance of
  this tree is a primary factor in the decision to step down as
  dmaengine maintainer.  That and the fact that the bulk of drivers/dma/
  activity is going through Vinod these days.

  The net_dma removal has not been in -next.  It has developed simple
  conflicts against mainline and net-next (for-3.18).

  Continuing thanks to Vinod for staying on top of drivers/dma/.

  Summary:

   1/ Step down as dmaengine maintainer see commit 08223d80
      "dmaengine maintainer update"

   2/ Removal of net_dma, as it has been marked 'broken' since 3.13
      (commit 77873803 "net_dma: mark broken"), without reports of
      performance regression.

   3/ Miscellaneous fixes"

* tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  net: make tcp_cleanup_rbuf private
  net_dma: revert 'copied_early'
  net_dma: simple removal
  dmaengine maintainer update
  dmatest: prevent memory leakage on error path in thread
  ioat: Use time_before_jiffies()
  dmaengine: fix xor sources continuation
  dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup()
  dma: mv_xor: Remove all callers of mv_xor_slot_cleanup()
  dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call
  ioat: Use pci_enable_msix_exact() instead of pci_enable_msix()
  drivers: dma: Include appropriate header file in dca.c
  drivers: dma: Mark functions as static in dma_v3.c
  dma: mv_xor: Add DMA API error checks
  ioat/dca: Use dev_is_pci() to check whether it is pci device

Pull module update from Rusty Russell:
 "Nothing major: support for compressing modules, and auto-tainting
  params.

  PS. My virtio-next tree is empty: DaveM took the patches I had.  There
      might be a virtio-rng starvation fix, but so far it's a bit voodoo
      so I will get to that in the next two days or it will wait"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  moduleparam: Resolve missing-field-initializer warning
  kbuild: handle module compression while running 'make modules_install'.
  modinst: wrap long lines in order to enhance cmd_modules_install
  modsign: lookup lines ending in .ko in .mod files
  modpost: simplify file name generation of *.mod.c files
  modpost: reduce visibility of symbols and constify r/o arrays
  param: check for tainting before calling set op.
  drm/i915: taint the kernel if unsafe module parameters are set
  module: add module_param_unsafe and module_param_named_unsafe
  module: make it possible to have unsafe, tainting module params
  module: rename KERNEL_PARAM_FL_NOARG to avoid confusion

Merge ipmi patches from Corey Minyard:
 "These have been in linux-next for a while, ready for 3.18"

* emailed patches from Corey Minyard <minyard@acm.org>:
  ipmi: Clear drvdata when interface is removed
  ipmi: work around gcc-4.9 build warning
  ipmi/of: Don't use unavailable interfaces
  ipmi: Clean up the error handling for channel config errors

This patch fixes a bug on hotmod removing.

After ipmi interface is removed using hotmod, kernel panic occurs when
rmmod impi_si.  For example, try this:

 # echo "remove,"`cat /proc/ipmi/0/params` > \
 /sys/module/ipmi_si/parameters/hotmod
 # rmmod ipmi_si

Then, rmmod fails with the following messages.

  ------------[ cut here ]------------
  WARNING: CPU: 12 PID: 10819 at /mnt/repos/linux/lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
  CPU: 12 PID: 10819 Comm: rmmod Not tainted 3.17.0-rc1 #19
  Hardware name: FUJITSU-SV PRIMERGY BX920 S2/D3030, BIOS 080015 Rev.3D81.3030 02/10/2012
  Call Trace:
    dump_stack+0x45/0x56
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_fmt+0x4c/0x50
    __list_del_entry+0x63/0xd0
    list_del+0xd/0x30
    cleanup_one_si+0x2a/0x230 [ipmi_si]
    ipmi_pnp_remove+0x15/0x20 [ipmi_si]
    pnp_device_remove+0x24/0x40
    __device_release_driver+0x7f/0xf0
    driver_detach+0xb0/0xc0
    bus_remove_driver+0x55/0xd0
    driver_unregister+0x2c/0x50
    pnp_unregister_driver+0x12/0x20
    cleanup_ipmi_si+0xbc/0xf0 [ipmi_si]
    SyS_delete_module+0x132/0x1c0
    system_call_fastpath+0x16/0x1b
  ---[ end trace 70b4377268f85c23 ]---

list_del in cleanup_one_si() fails because the smi_info is already
removed when hotmod removing.

When ipmi interface is removed by hotmod, smi_info is removed by
cleanup_one_si(), but is is still set in drvdata.  Therefore when rmmod
ipmi_si, ipmi_pnp_remove tries to remove it again and fails.

By this patch, a pointer to smi_info in drvdata is cleared when hotmod
removing so that it will be not accessed when rmmod.

changelog:
v2:
- Clear drvdata in cleanup_one_si
- Change subject

v1:
https://lkml.org/lkml/2014/9/8/741Signed-off-by: NTakao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Building ipmi on arm with gcc-4.9 results in this warning for an
allmodconfig build:

  drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_thread':
  include/linux/time.h:28:5: warning: 'busy_until.tv_sec' may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (lhs->tv_sec > rhs->tv_sec)
       ^
  drivers/char/ipmi/ipmi_si_intf.c:1007:18: note: 'busy_until.tv_sec' was declared here
    struct timespec busy_until;
                    ^

The warning is bogus and this case can not occur.  Apparently this is a
false positive resulting from gcc getting a little smarter about
tracking assignments but not smart enough.

Marking the ipmi_thread_busy_wait function as inline gives the gcc
optimization logic enough information to figure out for itself that the
case cannot happen, which gets rid of the warning without adding any
fake initialization.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If an IPMI controller is used by the firmware and as such marked with
a reserved status, we shouldn't use it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code to send the channel config errors was missing an error report
in one place and needed some more information in another, and had an
extraneous bit of code.  Clean all that up.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull "tinification" patches from Josh Triplett.

Work on making smaller kernels.

* tag 'tiny/for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/josh/linux:
  bloat-o-meter: Ignore syscall aliases SyS_ and compat_SyS_
  mm: Support compiling out madvise and fadvise
  x86: Support compiling out human-friendly processor feature names
  x86: Drop support for /proc files when !CONFIG_PROC_FS
  x86, boot: Don't compile early_serial_console.c when !CONFIG_EARLY_PRINTK
  x86, boot: Don't compile aslr.c when !CONFIG_RANDOMIZE_BASE
  x86, boot: Use the usual -y -n mechanism for objects in vmlinux
  x86: Add "make tinyconfig" to configure the tiniest possible kernel
  x86, platform, kconfig: move kvmconfig functionality to a helper

Pull SCSI fixes from James Bottomley:
 "This is a set of two small fixes, both to code which went in during
  the merge window: cxgb4i has a scheduling in atomic bug in its new
  ipv6 code and uas fails to work properly with the new scsi-mq code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] uas: disable use of blk-mq I/O path
  [SCSI] cxgb4i: avoid holding mutex in interrupt context

Pull kconfig fixes for tiny setups from Josh Triplett:
 "Two Kconfig bugfixes for 3.17 related to tinification.  These fixes
  make the Kconfig "General Setup" menu much more usable"

* tag 'tiny/kconfig-for-3.17' of https://git.kernel.org/pub/scm/linux/kernel/git/josh/linux:
  init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu
  init/Kconfig: Hide printk log config if CONFIG_PRINTK=n

commit 03b8c7b6 ("futex: Allow
architectures to skip futex_atomic_cmpxchg_inatomic() test") added the
HAVE_FUTEX_CMPXCHG symbol right below FUTEX.  This placed it right in
the middle of the options for the EXPERT menu.  However,
HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops
placing items in the EXPERT menu, and displays the remaining several
EXPERT items (starting with EPOLL) directly in the General Setup menu.

Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make
HAVE_FUTEX_CMPXCHG itself depend on FUTEX.  With this change, the
subsequent items display as part of the EXPERT menu again; the EMBEDDED
menu now appears as the next top-level item in the General Setup menu,
which makes General Setup much shorter and more usable.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

The buffers sized by CONFIG_LOG_BUF_SHIFT and
CONFIG_LOG_CPU_MAX_BUF_SHIFT do not exist if CONFIG_PRINTK=n, so don't
ask about their size at all.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>

Pull i2c fixes from Wolfram Sang:
 "Two i2c driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: qup: Fix order of runtime pm initialization
  i2c: rk3x: fix 0 length write transfers

Merge tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull trace ring buffer iterator fix from Steven Rostedt:
 "While testing some new changes for 3.18, I kept hitting a bug every so
  often in the ring buffer.  At first I thought it had to do with some
  of the changes I was working on, but then testing something else I
  realized that the bug was in 3.17 itself.  I ran several bisects as
  the bug was not very reproducible, and finally came up with the commit
  that I could reproduce easily within a few minutes, and without the
  change I could run the tests over an hour without issue.  The change
  fit the bug and I figured out a fix.  That bad commit was:

    Commit 651e22f2 "ring-buffer: Always reset iterator to reader page"

  This commit fixed a bug, but in the process created another one.  It
  used the wrong value as the cached value that is used to see if things
  changed while an iterator was in use.  This made it look like a change
  always happened, and could cause the iterator to go into an infinite
  loop"

* tag 'trace-fixes-v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Fix infinite spin in reading buffer

Pull cifs/smb3 fixes from Steve French:
 "Fix for CIFS/SMB3 oops on reconnect during readpages (3.17 regression)
  and for incorrectly closing file handle in symlink error cases"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix readpages retrying on reconnects
  Fix problem recognizing symlinks

Pull raid5 discard fix from Neil Brown:
 "One fix for raid5 discard issue"

* tag 'md/3.17-final-fix' of git://neil.brown.name/md:
  md/raid5: disable 'DISCARD' by default due to safety concerns.

Pull drm fixes from Dave Airlie:
 "Nothing too major or scary.

  One i915 regression fix, nouveau has a tmds regression fix, along with
  a regression fix for the runtime pm code for optimus laptops not
  restoring the display hw correctly"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: make sure display hardware is reinitialised on runtime resume
  drm/nouveau: punt fbcon resume out to a workqueue
  drm/nouveau: fix regression on original nv50 board
  drm/nv50/disp: fix dpms regression on certain boards
  drm/i915: Flush the PTEs after updating them before suspend

The uas driver uses the block layer tag for USB3 stream IDs.  With
blk-mq we can get larger tag numbers that the queue depth, which breaks
this assumption.  A fix is under way for 3.18, but sits on top of
large changes so can't easily be backported.   Set the disable_blk_mq
path so that a uas device can't easily crash the system when using
blk-mq for SCSI.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are three regression fixes (cpufreq core, pcc-cpufreq, i915 /
  ACPI) and one trivial fix for a callback return value mismatch in the
  cpufreq integrator driver.

  Specifics:

   - A recent cpufreq core fix went too far and introduced a regression
     in the system suspend code path.  Fix from Viresh Kumar.

   - An ACPI-related commit in the i915 driver that fixed backlight
     problems for some Thinkpads inadvertently broke a Dell machine (in
     3.16).  Fix from Aaron Lu.

   - The pcc-cpufreq driver was broken during the 3.15 cycle by a commit
     that put wait_event() under a spinlock by mistake.  Fix that
     (Rafael J Wysocki).

   - The return value type of integrator_cpufreq_remove() is void, but
     should be int.  Fix from Arnd Bergmann"

* tag 'pm+acpi-3.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: update 'cpufreq_suspended' after stopping governors
  ACPI / i915: Update the condition to ignore firmware backlight change request
  cpufreq: integrator: fix integrator_cpufreq_remove return type
  cpufreq: pcc-cpufreq: Fix wait_event() under spinlock

final regression fix for 3.17.

* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Flush the PTEs after updating them before suspend

The runtime pm calls need to be done before populating the children via the
i2c_add_adapter call.  If this is not done, a child can run into issues trying
to do i2c read/writes due to the pm_runtime_sync failing.
Signed-off-by: NAndy Gross <agross@codeaurora.org>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

i2cdetect -q was broken (everything was a false positive, and no transfers were
actually being sent over i2c). The way it works is by sending a 0 length write
request and checking for NACK. This patch fixes the 0 length writes and actually
sends them.
Reported-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NAlexandru M Stan <amstan@chromium.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Tested-by: NMax Schwarz <max.schwarz@online.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

* pm-cpufreq:
  cpufreq: update 'cpufreq_suspended' after stopping governors
  cpufreq: integrator: fix integrator_cpufreq_remove return type
  cpufreq: pcc-cpufreq: Fix wait_event() under spinlock

* acpi-video:
  ACPI / i915: Update the condition to ignore firmware backlight change request

Merge fixes from Andrew Morton:
 "5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: page_alloc: fix zone allocation fairness on UP
  perf: fix perf bug in fork()
  MAINTAINERS: change git URL for mpc5xxx tree
  mm: memcontrol: do not iterate uninitialized memcgs
  ocfs2/dlm: should put mle when goto kill in dlm_assert_master_handler

The zone allocation batches can easily underflow due to higher-order
allocations or spills to remote nodes.  On SMP that's fine, because
underflows are expected from concurrency and dealt with by returning 0.
But on UP, zone_page_state will just return a wrapped unsigned long,
which will get past the <= 0 check and then consider the zone eligible
until its watermarks are hit.

Commit 3a025760 ("mm: page_alloc: spill to remote nodes before
waking kswapd") already made the counter-resetting use
atomic_long_read() to accomodate underflows from remote spills, but it
didn't go all the way with it.

Make it clear that these batches are expected to go negative regardless
of concurrency, and use atomic_long_read() everywhere.

Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy")
Reported-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by
calling perf_event_free_task() when failing sched_fork() we will not yet
have done the memset() on ->perf_event_ctxp[] and will therefore try and
'free' the inherited contexts, which are still in use by the parent
process.  This is bad..
Suggested-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NOleg Nesterov <oleg@redhat.com>
Reported-by: NSylvain 'ythier' Hitier <sylvain.hitier@gmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The repository for mpc5xxx has been moved, update git URL to new
location.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The cgroup iterators yield css objects that have not yet gone through
css_online(), but they are not complete memcgs at this point and so the
memcg iterators should not return them.  Commit d8ad3055 ("mm/memcg:
iteration skip memcgs not yet fully initialized") set out to implement
exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does
not meet the ordering requirements for memcg, and so the iterator may
skip over initialized groups, or return partially initialized memcgs.

The cgroup core can not reasonably provide a clear answer on whether the
object around the css has been fully initialized, as that depends on
controller-specific locking and lifetime rules.  Thus, introduce a
memcg-specific flag that is set after the memcg has been initialized in
css_online(), and read before mem_cgroup_iter() callers access the memcg
members.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In dlm_assert_master_handler, the mle is get in dlm_find_mle, should be
put when goto kill, otherwise, this mle will never be released.
Signed-off-by: NAlex Chen <alex.chen@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: Njoyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull media fix from Mauro Carvalho Chehab:
 "One last time regression fix at em28xx.  The removal of .reset_resume
  broke suspend/resume on this driver for some devices.

  There are more fixes to be done for em28xx suspend/resume to be better
  handled, but I'm opting to let them to stay for a while at the media
  devel tree, in order to get more tests.  So, for now, let's just
  revert this patch"

* tag 'media/v3.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  Revert "[media] media: em28xx - remove reset_resume interface"

Commit 651e22f2 "ring-buffer: Always reset iterator to reader page"
fixed one bug but in the process caused another one. The reset is to
update the header page, but that fix also changed the way the cached
reads were updated. The cache reads are used to test if an iterator
needs to be updated or not.

A ring buffer iterator, when created, disables writes to the ring buffer
but does not stop other readers or consuming reads from happening.
Although all readers are synchronized via a lock, they are only
synchronized when in the ring buffer functions. Those functions may
be called by any number of readers. The iterator continues down when
its not interrupted by a consuming reader. If a consuming read
occurs, the iterator starts from the beginning of the buffer.

The way the iterator sees that a consuming read has happened since
its last read is by checking the reader "cache". The cache holds the
last counts of the read and the reader page itself.

Commit 651e22f2 changed what was saved by the cache_read when
the rb_iter_reset() occurred, making the iterator never match the cache.
Then if the iterator calls rb_iter_reset(), it will go into an
infinite loop by checking if the cache doesn't match, doing the reset
and retrying, just to see that the cache still doesn't match! Which
should never happen as the reset is suppose to set the cache to the
current value and there's locks that keep a consuming reader from
having access to the data.

Fixes: 651e22f2 "ring-buffer: Always reset iterator to reader page"
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Pull parisc fix from Helge Deller:
 "One late but trivial patch to fix the serial console on parisc
  machines which got broken during the 3.17 release cycle"

* 'parisc-3.17-8' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix serial console for machines with serial port on superio chip

If we got a reconnect error from async readv we re-add pages back
to page_list and continue loop. That is wrong because these pages
have been already added to the pagecache but page_list has pages that
have not been added to the pagecache yet. This ends up with a general
protection fault in put_pages after readpages. Fix it by not retrying
the read of these pages and falling back to readpage instead.

Fixes debian bug 762306
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>
Tested-by: NArthur Marsh <arthur.marsh@internode.on.net>

Changeset eb85d94b introduced a problem where if a cifs open
fails during query info of a file we
will still try to close the file (happens with certain types
of reparse points) even though the file handle is not valid.

In addition for SMB2/SMB3 we were not mapping the return code returned
by Windows when trying to open a file (like a Windows NFS symlink)
which is a reparse point.
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org>
CC: stable <stable@vger.kernel.org> #v3.13+

Merge NUMA balancing related fixlets from Mel Gorman:
 "There were a few minor changes so am resending just the two patches
  that are mostly likely to affect the bug Dave and Sasha saw and marked
  them for stable.

  I'm less confident it will address Sasha's problem because while I
  have not kept up to date, I believe he's also seeing memory corruption
  issues in next from an unknown source.  Still, it would be nice to see
  how they affect trinity testing.

  I'll send the MPOL_MF_LAZY patch separately because it's not urgent"

* emailed patches from Mel Gorman <mgorman@suse.de>:
  mm: numa: Do not mark PTEs pte_numa when splitting huge pages
  mm: migrate: Close race between migration completion and mprotect

This patch reverts 1ba6e0b5 ("mm: numa: split_huge_page: transfer the
NUMA type from the pmd to the pte"). If a huge page is being split due
a protection change and the tail will be in a PROT_NONE vma then NUMA
hinting PTEs are temporarily created in the protected VMA.

 VM_RW|VM_PROTNONE
|-----------------|
      ^
      split here

In the specific case above, it should get fixed up by change_pte_range()
but there is a window of opportunity for weirdness to happen. Similarly,
if a huge page is shrunk and split during a protection update but before
pmd_numa is cleared then a pte_numa can be left behind.

Instead of adding complexity trying to deal with the case, this patch
will not mark PTEs NUMA when splitting a huge page. NUMA hinting faults
will not be triggered which is marginal in comparison to the complexity
in dealing with the corner cases during THP split.

Cc: stable@vger.kernel.org
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>