There are two TI CDCE clock chips in this file. Move them close
together so they're easier to find.

No functional change, just cosmetic.
Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl>
[sboyd@codeaurora.org: Alphabetize]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Simple cosmetic fix.
Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

* clk-fixes:
  clk: tegra: super: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warning for pll_m
  clk: tegra: Use definition for pll_u override bit
  clk: tegra: Fix warning caused by pll_u failing to lock
  clk: tegra: Fix clock sources for Tegra210 EMC
  clk: tegra: Add the APB2APE audio clock on Tegra210
  clk: tegra: Add missing of_node_put()
  clk: tegra: Fix PLLE SS coefficients
  clk: tegra: Fix typos around clearing PLLE bits during enable
  clk: tegra: Do not disable PLLE when under hardware control
  clk: tegra: Fix pllx dyn step calculation
  clk: tegra: pll: Fix potential sleeping-while-atomic
  clk: tegra: Fix the misnaming of nvenc from msenc
  clk: tegra: Fix naming of MISC registers
  clk: tegra: Remove improper flags for lock_enable
  clk: tegra: Fix divider on VI_I2C

Merge tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-fixes

Pull tegra fixes from Thierry Reding:

clk: tegra: Fixes for v4.5-rc3

This set contains a bunch of miscellaneous fixes that have accumulated
over the past couple of weeks, primarily for the Tegra210 support added
in v4.5-rc1.

* tag 'tegra-for-4.5-clk-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: super: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warnings for functions not declared as static
  clk: tegra: Fix sparse warning for pll_m
  clk: tegra: Use definition for pll_u override bit
  clk: tegra: Fix warning caused by pll_u failing to lock
  clk: tegra: Fix clock sources for Tegra210 EMC
  clk: tegra: Add the APB2APE audio clock on Tegra210
  clk: tegra: Add missing of_node_put()
  clk: tegra: Fix PLLE SS coefficients
  clk: tegra: Fix typos around clearing PLLE bits during enable
  clk: tegra: Do not disable PLLE when under hardware control
  clk: tegra: Fix pllx dyn step calculation
  clk: tegra: pll: Fix potential sleeping-while-atomic
  clk: tegra: Fix the misnaming of nvenc from msenc
  clk: tegra: Fix naming of MISC registers
  clk: tegra: Remove improper flags for lock_enable
  clk: tegra: Fix divider on VI_I2C

These functions either never existed or were only used in
OF_CLK_DECLARE() macros. Remove the dead prototypes.

Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

We don't use CLK_IS_ROOT but in a few places in the common clk
framework core. Let's replace those checks with a check for the
number of parents a clk has instead of the flag, freeing up one
flag for something else. We don't remove the flag yet so that
things keep building, but we'll remove it once all drivers have
removed their flag usage.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

clk_get() for DT based clks already returns EPROBE_DEFER when the
OF clk provider is not present. So having all this code in the
clk provider to return EPROBE_DEFER when the gpio isn't ready yet
can be replaced with a platform driver that doesn't add the clk
provider until the gpio can be requested. Get rid of the
OF_CLK_DECLARE and convert this to a platform driver instead.
Tested-by: NJyri Sarha <jsarha@ti.com>
Cc: Sergej Sawazki <ce3a@gmx.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Jon Nettleton <jon@solid-run.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

If clock is already unregistered, it returns with holding lock.
It needs to be unlocked.
Signed-off-by: NInsu Yun <wuninsu@gmail.com>
[sboyd@codeaurora.org: Use goto instead]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The clk-vt8500.c driver would previously enter an endless loop
when invalid settings got requested, this was now fixed. However,
the driver will now return uninitialized data for a subset of those
cases instead, as the gcc correctly warns:

clk/clk-vt8500.c: In function 'wm8650_find_pll_bits':
clk/clk-vt8500.c:423:12: error: 'best_div2' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *divisor2 = best_div2;
            ^
clk/clk-vt8500.c:422:12: error: 'best_div1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *divisor1 = best_div1;
            ^
clk/clk-vt8500.c:421:14: error: 'best_mul' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *multiplier = best_mul;

This reworks the error handling in the driver so we now return
-EINVAL from clk_round_rate() and clk_set_rate() when we get
impossible inputs.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 090341b0 ("clk: vt8500: fix sign of possible PLL values")
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

If clk_fetch_parent_index() fails, p_rate is unused.  Move the
assignment after the error checking.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The clk_core_get_parent_by_index can be used as a helper function
to simplify the implementation of clk_fetch_parent_index().
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

If parent is given with NULL, clk_fetch_parent_index() could return
a positive index value.

Currently, parent is checked by the callers of this function, but
it would be safer to do it in this function.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

This loop can be much simpler. If a new parent is available for
orphan clocks, __clk_init_parent(orphan) can detect it.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Currently, clk_register() never checks a circular parent looping,
but clock providers could register such an insane clock topology.
For example, "clk_a" could have "clk_b" as a parent, and vice versa.
In this case, clk_core_reparent() creates a circular parent list
and __clk_recalc_accuracies() calls itself recursively forever.

The core infrastructure should be kind enough to bail out, showing
an appropriate error message in such a case.  This helps to easily
find a bug in clock providers.  (uh, I made such a silly mistake
when I was implementing my clock providers first.  I was upset
because the kernel did not respond, without any error message.)

This commit adds a new helper function, __clk_is_ancestor().  It
returns true if the second argument is a possible ancestor of the
first one.  If a clock core is a possible ancestor of itself, it
would make a loop when it were registered.  That should be detected
as an error.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The translation from the index into clk_core is done by
clk_core_get_parent_by_index().  The if-block for num_parents == 1
case is duplicating the code in the clk_core_get_parent_by_index().

Drop the "if (num_parents == 1)" from the special case.  Instead,
set the index to zero if .get_parent() is missing.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The .get_parent is mandatory for multi-parent clocks.  Move the check
to __clk_core_init(), like other callback checkings.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
[sboyd@codeaurora.org: Squashed in error path handling, fix typos
in commit message]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Sparse reports the following warnings for structures and functions that
should be declared static:

drivers/clk/tegra/clk-tegra-super-gen4.c:70:35: warning: symbol
 'tegra_super_gen_info_gen4' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra-super-gen4.c:96:35: warning: symbol
 'tegra_super_gen_info_gen5' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra-super-gen4.c:174:13: warning: symbol
 'tegra_super_clk_init' was not declared. Should it be static?

Fix this by making the above static.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Sparse reports the following warnings for functions in clk-tegra210.c
that should be declared as static:

drivers/clk/tegra/clk-tegra210.c:460:6: warning: symbol
 'tegra210_pllcx_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:485:6: warning: symbol
 '_pllc_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:490:6: warning: symbol
 '_pllc2_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:495:6: warning: symbol
 '_pllc3_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:500:6: warning: symbol
 '_plla1_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:510:6: warning: symbol
 'tegra210_plla_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:562:6: warning: symbol
 'tegra210_plld_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:701:6: warning: symbol
 'tegra210_plld2_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:709:6: warning: symbol
 'tegra210_plldp_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:722:6: warning: symbol
 'tegra210_pllc4_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:731:6: warning: symbol
 'tegra210_pllre_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:844:6: warning: symbol
 'tegra210_pllx_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:904:6: warning: symbol
 'tegra210_pllmb_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:963:6: warning: symbol
 'tegra210_pllp_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:1025:6: warning: symbol
 'tegra210_pllu_set_defaults' was not declared. Should it be static?
drivers/clk/tegra/clk-tegra210.c:1215:15: warning: symbol
 'tegra210_clk_adjust_vco_min' was not declared. Should it be static?

Fix this by declaring the above as static.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Sparse generates the following warning for the pll_m params structure:

drivers/clk/tegra/clk-tegra210.c:1569:10: warning: Initializer entry
 defined twice
drivers/clk/tegra/clk-tegra210.c:1570:10:   also defined here

Fix this by correcting the index for the MISC1 register.

Fixes: b31eba5ff3f7 ("clk: tegra: Add support for Tegra210 clocks")
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The definition, PLLU_BASE_OVERRIDE, for the pll_u OVERRIDE bit is defined
but not used and when the OVERRIDE bit is cleared in tegra210_pll_init()
the code directly uses the bit number. Therefore, use the definition,
PLLU_BASE_OVERRIDE when clearing the OVERRIDE bit.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

If the pll_u is not configured by the bootloader, then on kernel boot the
following warning is seen:

 clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock
 tegra_init_from_table: Failed to enable pll_u_out1
 ------------[ cut here ]------------
 WARNING: at drivers/clk/tegra/clk.c:269
 Modules linked in:

 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-next-20151214+ #1
 Hardware name: NVIDIA Tegra210 P2371 reference board (E.1) (DT)
 task: ffffffc0bc0a0000 ti: ffffffc0bc0a8000 task.ti: ffffffc0bc0a8000
 PC is at tegra_init_from_table+0x140/0x164
 LR is at tegra_init_from_table+0x140/0x164
 pc : [<ffffffc0008fee78>] lr : [<ffffffc0008fee78>] pstate: 80000045
 sp : ffffffc0bc0abd50
 x29: ffffffc0bc0abd50 x28: ffffffc00090b8a8
 x27: ffffffc000a06000 x26: ffffffc0bc019780
 x25: ffffffc00086a708 x24: ffffffc00086a790
 x23: ffffffc0006d7188 x22: ffffffc0bc010000
 x21: 000000000000016e x20: ffffffc0bc00d100
 x19: ffffffc000944178 x18: 0000000000000007
 x17: 000000000000000e x16: 0000000000000001
 x15: 0000000000000007 x14: 000000000000000e
 x13: 0000000000000013 x12: 000000000000001a
 x11: 000000000000004d x10: 0000000000000750
 x9 : ffffffc0bc0a8000 x8 : ffffffc0bc0a07b0
 x7 : 0000000000000001 x6 : 0000000002d5f0f8
 x5 : 0000000000000000 x4 : 0000000000000000
 x3 : 0000000000000002 x2 : ffffffc000996724
 x1 : 0000000000000000 x0 : 0000000000000032

 ---[ end trace cbd20ae519e92ced ]---
 Call trace:
 [<ffffffc0008fee78>] tegra_init_from_table+0x140/0x164
 [<ffffffc000900ac8>] tegra210_clock_apply_init_table+0x20/0x28
 [<ffffffc0008fec40>] tegra_clocks_apply_init_table+0x18/0x24
 [<ffffffc00008291c>] do_one_initcall+0x90/0x194
 [<ffffffc0008cfab0>] kernel_init_freeable+0x148/0x1e8
 [<ffffffc000636bb0>] kernel_init+0x10/0xdc
 [<ffffffc000085cd0>] ret_from_fork+0x10/0x40
 clk_pll_wait_for_lock: Timed out waiting for pll pll_u_vco lock
 tegra_init_from_table: Failed to enable pll_u_out2
 ------------[ cut here ]------------

pll_u can be either controlled by software or hardware and this is
selected via the OVERRIDE bit in the pll_u base register. In the function
tegra210_pll_init(), the OVERRIDE bit for pll_u is cleared, which selects
hardware control of the pll. However, at the same time the pll_u clocks
are populated in the init_table for tegra210 and so software will try to
configure the pll_u if it is not already configured and hence, the above
warning is seen when the pll fails to lock. Remove the pll_u clocks from
the init_table so that software does not try to configure this pll on
boot.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The EMC clock sources for Tegra210 currently incorrectly include pll_c2
and pll_c3. However, both of these should have been pll_mb as shown in
the TRM. If Tegra210 happens to be configured such that the pll_mb is the
default clock for the EMC, as configured by the bootloader, then this will
cause a system hang on boot. This is because the kernel will disable the
pll_mb when disabling unused clock as it appears to be unused when it is
not.

Also add the additional pll_p clock source for the EMC.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The APB2APE clock for the audio subsystem is required for powering up the
audio power domain and accessing the various modules in this subsystem on
Tegra210 devices. Add this clock for Tegra210.
Signed-off-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

for_each_child_of_node() performs an of_node_get() on each iteration, so
before breaking out of the loop an of_node_put() is required.

Found using Coccinelle. The semantic patch used for this is as follows:

// <smpl>
@@
expression e;
local idexpression child;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
(
   return child;
|
+  of_node_put(child);
?  return ...;
)
   ...
 }
// </smpl>
Signed-off-by: NAmitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The PLLE SS coefficients are different between Tegra210 and Tegra114.
Add SoC generation specific versions for Tegra114 and Tegra210 and use
them in their respective ->enable() callbacks.
Signed-off-by: NMark Kuo <mkuo@nvidia.com>
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

While enabling PLLE on both Tegra114 and Tegra210, we should be clearing
PLLE_MISC_VREG_BG_CTRL_MASK and PLLE_MISC_VREG_CTRL_MASK not setting
them. This patch fixes both places where we incorrectly set instead of
cleared those bits.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Software should not disable PLLE if PLLE is already put under hardware
control.
Signed-off-by: NMark Kuo <mkuo@nvidia.com>
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

The logic for calculating the input rate used when figuring out the
proper dynamic steps for pllx was incorrect. It is supposed to be
calculated using parent_rate / m but it was just using the parent rate
directly, therefore using the wrong step values.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Since the ->enable() callback is called with a spinlock held, we cannot
call potentially blocking functions such as clk_get_rate() or
clk_get_parent(), so use the unlocked versions instead.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
[rklein: Adapted from ChromeOS patch, removing pllu_enable cleanup as
it isn't present upstream]
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

When adding the nvenc clock, it was partially named msenc in the code.
Since the msenc clock isn't present in Tegra210 and has been replaced by
the nvenc clock, its misleading to see it present. Therefore, properly
rename it.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Some register for PLLM and PLLMB were named MISC0 but according to the
TRM, they have different names. Sync up the names to make it easier to
understand which register they are really referring to.
Signed-off-by: NRhyland Klein <rklein@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

These three cases let clk_register() fail.  They should be considered
as error messages.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The core->parents is a cache to save expensive clock parent look-ups.
It will be filled as needed later.  We do not have to do it here.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Drop the "if (!core->parents)" case and refactor the function a bit
because core->parents is always allocated.  (Strictly speaking, it is
ZERO_SIZE_PTR if core->num_parents == 0, but such a case is omitted
by the if-conditional above.)
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Currently, __clk_core_init() allows failure of the kcalloc() for the
core->parents.  So, clk_fetch_parent_index() and __clk_init_parent()
also try to allocate core->parents in case it has not been allocated
yet.  Scattering memory allocation here and there makes things
complicated.

Like other clk_core members, allocate core->parents in clk_register()
and let it fail in case of memory shortage.  If we cannot allocate
such a small piece of memory, the system is already insane.  There is
no point to postpone the memory allocation.

Also, allocate core->parents regardless of core->num_parents.  We want
it even if core->num_parents == 1 because clk_fetch_parent_index()
might be called against the clk_core with a single parent.

If core->num_parents == 0, core->parents is set to ZERO_SIZE_PTR. It
is harmless because no access happens to core->parents in such a case.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Now, the clock parent is not "struct clk *", but "struct clk_core *".
Of course, the size of a pointer is always same, but strictly speaking,
sizeof(struct clk *) should be sizeof(struct clk_core *) here.

This mismatch happened when we split the structure into struct clk
and struct clk_core.  For the potential possibility of future renaming,
sizeof(*core->parents) would be better.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

This if-block has been here since the introduction of the common
clock framework.  Now no clock drivers are statically initialized.
core->parent is always NULL at this point.  Drop the redundant
check and the confusing comment.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

Now this function takes clk_core as its argument.  __clk_core_init()
would be more suitable for the name of this function.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The argument clk_user is used only for the clk_user->core.  The rest
of this function only takes care of clk_core.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>

The "struct device *dev" is not used at all in this function.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>