Since we are already checking for read failure in check_link we don't need
to do it here. Instead just make sure the watchdog task gets scheduled, if
we are up, and it can be done there. This will better follow igbvf method
of handling a mailbox event and message timeout.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the use of hw_dbg in ixgbevf when the ixgbe_get_regs function
is called from ethtool. This goes along side a patch to ethtool which enables
proper support for ixgbevf pretty-printing of registers.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the xmit path, the driver may drop some pkts due to reasons such as
DMA mapping errors, out of memory conditions or to protect HW from
unrecoverable errors. Add a counter in TX-stats for such drops.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current EQ delay calculation for AIC is based only on RX packet rate.
This fails to be effective when there's only TX and no RX.
This patch inclues:
- Calculating EQ-delay based on both RX and TX pps.
- Modifying EQ-delay of all EQs via one cmd, instead of issuing a separate
  cmd for each EQ.
- A new structure to store interrupt coalescing parameters, in a separate
  cache-line from the EQ-obj.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This cmd needs to be sent to FW when enabling VFs (currently used only
for Lancer.) Also, avoid calling the cmd when driver loads and finds that
VFs are already enabled from a previous load.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On BE3-R 1G ports (identified by port numbers 2 and 3) the FW cannot properly
support multiple TXQs. This also makes the number of RX and TX queues symmetric
as only a single RXQ is available on 1G ports.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is a required field for all TX_CREATE cmd versions > 0.
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Re-define the sriov_want() macro to check for number of VFs that need
to be enabled in the current load of the driver or the number of VFs that
still remain enabled from the previous load (attached VFs cannot be disabled.)
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-can@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data structure of_match_ptr() protects is always compiled in.
Hence of_match_ptr() is not needed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not
always the case:

RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391)
...
 [<ffffffff81651ca5>] dump_stack+0x54/0x74
 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding]
 [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0
 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70
 [<ffffffff81558020>] dev_mc_add+0x10/0x20
 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0
 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260
 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320
 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260
...

Fix this by using RCU primitives.
Reported-by: NJoe Lawrence <joe.lawrence@stratus.com>
Tested-by: NJoe Lawrence <joe.lawrence@stratus.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

removes following warnings-
drivers/net/phy/marvell.c:37: WARNING: Use #include <linux/io.h> instead of <asm/io.h>
drivers/net/phy/marvell.c:39: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Signed-off-by: NAvinash Kumar <avi.kp.137@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

bnx2x makes a dangerous use of skb_is_gso_v6().

It should first make sure skb is a gso packet
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Acked-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Warning(include/net/sock.h:411): No description found for parameter
'sk_max_pacing_rate'

Lets please "make htmldocs" and kbuild bot.
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes it possible to use some more advanced queuing
techniques with this driver.

When multi queue support will be added some changes to Byte Queue
handling is needed.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes it possible to use some more advanced queuing
techniques with this driver.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Move sysctl_local_ports from a global variable into struct netns_ipv4.
- Modify inet_get_local_port_range to take a struct net, and update all
  of the callers.
- Move the initialization of sysctl_local_ports into
   sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c

v2:
- Ensure indentation used tabs
- Fixed ip.h so it applies cleanly to todays net-next

v3:
- Compile fixes of strange callers of inet_get_local_port_range.
  This patch now successfully passes an allmodconfig build.
  Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range
Originally-by: NSamya <samya@twitter.com>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mark code path's likely/unlikely based on most common usage.
  * Very few devices use dsa tags.
  * Most traffic is Ethernet (not 802.2)
  * No sane person uses trailer type or Novell encapsulation
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove old legacy comment and weird if condition.
The comment has outlived it's stay and is throwback to some
early net code (before my time). Maybe Dave remembers what it meant.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

setting fl6.flowi6_flags as zero after memset is redundant, Remove it.
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was a bug that netback routines netbk/xenvif_skb_count_slots and
netbk/xenvif_gop_frag_copy disagreed with each other, which caused
netback to push wrong number of responses to netfront, which caused
netfront to eventually crash. The bug was fixed in 6e43fc04
("xen-netback: count number required slots for an skb more carefully").

Commit 6e43fc04 focused on backport-ability. The drawback with the
existing packing scheme is that the ring is not used effeciently, as
stated in 6e43fc04.

skb->data like:
    |        1111|222222222222|3333        |

is arranged as:
    |1111        |222222222222|3333        |

If we can do this:
    |111122222222|22223333    |
That would save one ring slot, which improves ring effeciency.

This patch effectively reverts 6e43fc04. That patch made count_slots
agree with gop_frag_copy, while this patch goes the other way around --
make gop_frag_copy agree with count_slots. The end result is that they
still agree with each other, and the ring is now arranged like:
    |111122222222|22223333    |

The patch that improves packing was first posted by Xi Xong and Matt
Wilson. I only rebase it on top of net-next and rewrite commit message,
so I retain all their SoBs. For more infomation about the original bug
please refer to email listed below and commit message of 6e43fc04.

Original patch:
http://lists.xen.org/archives/html/xen-devel/2013-07/msg00760.htmlSigned-off-by: NXi Xiong <xixiong@amazon.com>
Reviewed-by: NMatt Wilson <msw@amazon.com>
[ msw: minor code cleanups, rewrote commit message, adjusted code
  to count RX slots instead of meta structures ]
Signed-off-by: NMatt Wilson <msw@amazon.com>
Cc: Annie Li <annie.li@oracle.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
[ liuw: rebased on top of net-next tree, rewrote commit message, coding
  style cleanup. ]
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Acked-by: NIan Campbell <Ian.Campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

err is set once, then first code resets it.
  err = tcf_exts_validate(...)
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NJamal Hadi Salim <hadi@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than returning earlier value (EINVAL), return ENOMEM if
kzalloc fails. Found while reviewing to find another EINVAL condition.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's a forgotten function declaration, which was removed some time ago
already.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	include/linux/netdevice.h

More extern removals from Joe Perches.

Minor conflict with the dev_notify_flags changes which added a new
argument to __dev_notify_flags().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	include/net/xfrm.h

Simple conflict between Joe Perches "extern" removal for function
declarations in header files and the changes in Steffen's tree.

Steffen Klassert says:

====================
Two patches that are left from the last development cycle.
Manual merging of include/net/xfrm.h is needed. The conflict
can be solved as it is currently done in linux-next.

1) We announce the creation of temporary acquire state via an asyc event,
   so the deletion should be annunced too. From Nicolas Dichtel.

2) The VTI tunnels do not real tunning, they just provide a routable
   IPsec tunnel interface. So introduce and use xfrm_tunnel_notifier
   instead of xfrm_tunnel for xfrm tunnel mode callback. From Fan Du.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch proposes to remove the IRQF_DISABLED flag
from drivers/net/hamradio/baycom_*

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When flags IFF_PROMISC and IFF_ALLMULTI are changed, netlink messages are not
consistent. For example, if a multicast daemon is running (flag IFF_ALLMULTI
set in dev->flags but not dev->gflags, ie not exported to userspace) and then a
user sets it via netlink (flag IFF_ALLMULTI set in dev->flags and dev->gflags, ie
exported to userspace), no netlink message is sent.
Same for IFF_PROMISC and because dev->promiscuity is exported via
IFLA_PROMISCUITY, we may send a netlink message after each change of this
counter.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch only prepares the next one, there is no functional change.
Now, __dev_notify_flags() can also be used to notify flags changes via
rtnetlink.
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Newer firmware use a new pid and a different interface.
Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As mentioned in commit afe4fd06 ("pkt_sched: fq: Fair Queue packet
scheduler"), this patch adds a new socket option.

SO_MAX_PACING_RATE offers the application the ability to cap the
rate computed by transport layer. Value is in bytes per second.

u32 val = 1000000;
setsockopt(sockfd, SOL_SOCKET, SO_MAX_PACING_RATE, &val, sizeof(val));

To be effectively paced, a flow must use FQ packet scheduler.

Note that a packet scheduler takes into account the headers for its
computations. The effective payload rate depends on MSS and retransmits
if any.

I chose to make this pacing rate a SOL_SOCKET option instead of a
TCP one because this can be used by other protocols.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no users left, so it's safe to remove.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't need the circular loop there and it's the only current user of
bond_next_slave() - so just use the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It has no users, so it's safe to remove it completely.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all instances of

for (agg = __get_first_agg(); agg; agg = __get_next_port)

to the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all instances of

for (agg = __get_first_agg(); agg; agg = __get_next_port)

to the standard bond_for_each_slave(). Also, remove the useless checks
before calling bond_3ad_set_carrier() - if we have something NULL - it
would fire long ago, in __get_first/next_port(), per example.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we're relying on suboptimal construct

for (; aggregator; aggregator = __get_next_agg(aggregator)) {

where aggregator is an argument of __get_active_agg() which is _always_ the
first slave's aggregator - judging by all the callers, comments in the
ad_agg_selection_logic() and by logic.

Convert it to use the standard bond_for_each_slave().

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>