This will allow to use the following construct in source files:

config FOO
    string
    default "foo"

source "$FOO/Kconfig"
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

This silences the warning printed upon prompt redefinition for the rootmenu.
We will encounter this redefinition when a "mainmenu" statement is specified and
override the default prompt.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Delay the window initialization to let the rootmenu's prompt be
initialized as it will be used to get the window's title.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

If specified, the directive must be placed at the top of the Kconfig file.

We need to change the grammar to make the mainmenu directive set the
`rootmenu' prompt. This reflect how menu_add_prompt() works internally, ie.
set the prompt of the `current_entry', pointing originally to `rootmenu'.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NRandy Dunlap <rdunlap@xenotime.net>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

With the upcoming dynamical configuration prefix, we can no longer assume that
the prefix will start by a 'C'. As such, we can no longer hardcode this value in
the `case ...:', so replace the `switch() { ... }' statement by a more flexible
'if () { ... }' statement.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NMichal Marek <mmarek@suse.cz>

Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on
                       if (input_mode == nonint_oldconfig ||
                           input_mode == oldnoconfig) {
                               if (input_mode == nonint_oldconfig &&
                                   sym->name &&
                                    !sym_is_choice_value(sym)) {
to avoid oldnoconfig chugging through the else stanza.

Fix that to restore expected behaviour (which I've confirmed in the
Fedora kernel build that the configs end up looking the same.)
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Qt4 is now used by default and will get more testing. In case someone
still uses Qt3 and reports a bug, make it easy to recognize that this is
Qt3.
Acked-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

A straight forward port to QT4 using qt3to4 and compiling against
  qt3support

* Use pkg-config to detect QT4 which is hopefully portable enough
* If no QT4, QT3 will by tried instead
* Classes renamed using qt3to4
  * If build using QT3 renamed to QT3 class names using defines
* ConfigInfoView::menu has to be renamed as QT4 moc strips struct from
  struct menu and creates a name conflict
* QT2 support has been dropped
* The hidden options inserted in 39a4897c
  are use in native API
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

NetBSD lacks getopt_long_only() whereas getopt_long() works just fine.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This might be used by the user to specify extra arguments for the host
compiler.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

On BSD systems, `check-lxdialog' would select -lcurses as the default
curses library which would conflict with -lncurses at runtime: curses'
compatible symbols are getting handled by the system's curses library while the
ncurses-specific symbols are getting handled by the ports' ncurses.

This fixes `nconf' segmentation fault on these systems.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This fixes:
% gmake LKC_GENPARSER=1 menuconfig
[...]
scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function)
scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once
scripts/kconfig/confdata.c:739: error: for each function it appears in.)
scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function)

triggered on NetBSD.
Signed-off-by: NArnaud Lacombe <lacombar@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Remove the old hotkeys feature, and replace it by an interactive string
search.
From nconfig help:

Searching: pressing '/' triggers interactive search mode.
           nconfig performs a case insensitive search for the string
           in the menu prompts (no regex support).
           Pressing the up/down keys highlights the previous/next
           matching item. Backspace removes one character from the
           match string. Pressing either '/' again or ESC exits
           search mode. All other keys behave normally.

Miscellaneous other changes (including Rundy's and Justin's input).
Signed-off-by: NNir Tzachar <nir.tzachar@gmail.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Following sample Kconfig generated a segfault:

config FOO
        bool
        select PERF_EVENTS if HAVE_HW_BREAKPOINT

config PERF_EVENTS
        bool

config HAVE_HW_BREAKPOINT
        bool
        depends on PERF_EVENTS

Fix by reverting back to a valid property if there was no
property on the stack of symbols.

The above pattern were seen in sh Kconfig.
A fix for the Kconfig file has been sent to the sh folks.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

savedefconfig failed to save the correct minimal config
when it encountered a choice marked optional.

Consider following minimal configuration:
$cat Kconfig
choice
	prompt "choice"
	optional

config A
	bool "a"

config B
	bool "b"

endchoice

$cat .config | grep -v ^#
CONFIG_A=y

$conf --savedefconfig=defconfig Kconfig

would before this fix result in an empty file, because
kconfig would assume that CONFIG_A=y is a default value.
But because the choice is optional the default is that
both A and B are =n.

Fix so we handle optional choices correct.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This fix facilitates fgets() either it returns on success or on error or
when end of file occurs.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This fix facilitates fwrite() in both confdata.c and expr.c, either it
succeeds in writing, or an error occurs, or the end of file is reached.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

nconf crush with segfault if press right arrow in empty menu.
Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

If a minimal config did not specify the value
of all choice values, the resulting configuration
could have wrong values.

Consider following example:
config M
        def_bool y
        option modules
choice
        prompt "choice list"
config A
        tristate "a"
config B
	tristate "b"
endchoice

With a defconfig like this:
CONFIG_M=y
CONFIG_A=y

The resulting configuration would have

    CONFIG_A=m

which was unexpected.

The problem was not not all choice values were set and thus
kconfig calculated a wrong value.

The fix is to set all choice values when we
read a defconfig files.

conf_set_all_new_symbols() is refactored such that
random choice values are now handled by a dedicated function.
And new choice values are set by set_all_choice_values().

This was not the minimal fix, but the fix that resulted
in the most readable code.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reported-by: NArve Hjønnevåg <arve@android.com>
Tested-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

savedefconfig failed to save choice symbols equal to 'y'
for tristate choices.
This resulted in this value being lost.

In particular is fixes an issue where

	make ARCH=avr32 atngw100_defconfig
	make ARCH=avr32 savedefconfig
	cp defconfig arch/avr32/configs/atngw100_defconfig
	make ARCH=avr32 atngw100_defconfig
	diff -u .config .config.old

failed to produce an identical .config.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Conflicts:
	scripts/kconfig/Makefile

savedefconfig will save a minimal config to a file
named "defconfig".

The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.

The implementation was tested against several minimal
configs for arm which was created using brute-force.

There was one regression related to default numbers
which had their valid range further limited by another symbol.

Sample:

config FOO
	int "foo"
	default 4

config BAR
	int "bar"
	range 0 FOO

If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.

This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add a a few local functions to avoid some code duplication
No functional changes.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Move logic to determine default for a choice to
a separate function.
No functional changes.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

alldefconfig create a configuration with all values set
to their default value (form the Kconfig files).

This may be useful when we try to use more sensible default
values and may also be used in combination with
the minimal defconfigs.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Consider following kconfig file:

config TEST1
	bool "test 1"
	depends on TEST2

config TEST2
	bool "test 2"
	depends on TEST1

Previously kconfig would report:

foo:6:error: found recursive dependency: TEST2 -> TEST1 -> TEST2

With the following patch kconfig reports:
foo:5:error: recursive dependency detected!
foo:5:  symbol TEST2 depends on TEST1
foo:1:  symbol TEST1 depends on TEST2

Note that we now report where the offending symbols are defined.
This can be a great help for complex situations involving
several files.

Patch is originally from Roman Zippel with a few adjustments by Sam.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

When we add a new config symbol save the file/line
so we later can refer to their location.

The information is saved as a property to a config symbol
because we may have multiple definitions of the same symbol.

This has the side-effect that a symbol always has
at least one property.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Rename to a name that better match the other kconfig targets.

listnewconfig shall read as:

- list new options compared to current configuration

New options are now written to stdout so one can redirect the output.

Do not exit with an error code if there is new options.

These are feature changes compared to the original
nonint_oldconfig - but as this feature has not yet been in a
released kernel it should not matter.

It is still possible to do:

make listnewconfig
lookup new config options in Kconfig*
edit .config
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Acked-by: NAristeu Rozanski <aris@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Rename target to something that fall more in line
with the other kconfig targets.

oldnoconfig shall read as:

- read the old configuration and set all new options to no
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>