- 26 1月, 2011 11 次提交
-
-
由 Andy Adamson 提交于
As stated in section 2.4 of RFC 5661, subsequent instances of the client need to present the same co_ownerid. Concatinate the client's IP dot address, host name, and the rpc_auth pseudoflavor to form the co_ownerid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the call to nfs_wcc_update_inode() results in an attribute update, we need to ensure that the inode's attr_gencount gets bumped too, otherwise we are not protected against races with other GETATTR calls. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
What we really want to know is the ref count. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Always assign the cb_process_state nfs_client pointer so a processing error in cb_sequence after the nfs_client is found and referenced returns a non-NULL cb_process_state nfs_client and the matching nfs_put_client in nfs4_callback_compound dereferences the client. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
The information required to find the nfs_client cooresponding to the incoming back channel request is contained in the NFS layer. Perform minimal checking in the RPC layer pg_authenticate method, and push more detailed checking into the NFS layer where the nfs_client can be found. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Nick Bowler <nbowler@elliptictech.com> reports: > We were just having some NFS server troubles, and my client machine > running 2.6.38-rc1+ (specifically, commit 2b1caf6e) crashed > hard (syslog output appended to this mail). > > I'm not sure what the exact timeline was or how to reproduce this, > but the server was rebooted during all this. Since I've never seen > this happen before, it is possibly a regression from previous kernel > releases. However, I recently updated my nfs-utils (on the client) to > version 1.2.3, so that might be related as well. [ BUG output redacted ] When done searching, the for_each_host loop in next_host_state() falls through and returns the final host on the host chain without bumping it's reference count. Since the host's ref count is only one at that point, releasing the host in nlm_host_rebooted() attempts to destroy the host prematurely, and therefore hits a BUG(). Likely, the original intent of the for_each_host behavior in next_host_state() was to handle the case when the host chain is empty. Searching the chain and finding no suitable host to return needs to be handled as well. Defensively restructure next_host_state() always to return NULL when the loop falls through. Introduced by commit b10e30f6 "lockd: reorganize nlm_host_rebooted". Cc: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
nfsacl_encode() allocates memory in certain cases. This of course is not guaranteed to work. Since commit 9f06c719 "SUNRPC: New xdr_streams XDR encoder API", the kernel's XDR encoders can't return a result indicating possibly a failure, so a memory allocation failure in nfsacl_encode() has become fatal (ie, the XDR code Oopses) in some cases. However, the allocated memory is a tiny fixed amount, on the order of 40-50 bytes. We can easily use a stack-allocated buffer for this, with only a wee bit of nose-holding. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. The nfsacl_encode() and nfsacl_decode() functions return negative errno values, and each call site verifies that the returned value is not negative. Change the synopsis of both of these functions to reflect this usage. Document the synopsis and return values. Reported-by: NTrond Myklebust <trond.myklebust@netapp.com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Milan Broz <mbroz@redhat.com> reports: > on today Linus' tree I get OOps if using nfs. > > server (2.6.36) exports dir: > /dir 172.16.1.0/24(rw,async,all_squash,no_subtree_check,anonuid=500,anongid=500) > > on client it is mounted in fstab > server:/dir /mnt/tst nfs rw,soft 0 0 > > and these commands OOpses it (simplified from a configure script): > > cd /dir > touch x > install x y > > [ 105.327701] ------------[ cut here ]------------ > [ 105.327979] kernel BUG at fs/nfs/nfs3xdr.c:1338! > [ 105.328075] invalid opcode: 0000 [#1] PREEMPT SMP > [ 105.328223] last sysfs file: /sys/devices/virtual/bdi/0:16/uevent > [ 105.328349] Modules linked in: usbcore dm_mod > [ 105.328553] > [ 105.328678] Pid: 3710, comm: install Not tainted 2.6.37+ #423 440BX Desktop Reference Platform/VMware Virtual Platform > [ 105.328853] EIP: 0060:[<c116c06c>] EFLAGS: 00010282 CPU: 0 > [ 105.329152] EIP is at nfs3_xdr_enc_setacl3args+0x61/0x98 > [ 105.329249] EAX: ffffffea EBX: ce941d98 ECX: 00000000 EDX: 00000004 > [ 105.329340] ESI: ce941cd0 EDI: 000000a4 EBP: ce941cc0 ESP: ce941cb4 > [ 105.329431] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 105.329525] Process install (pid: 3710, ti=ce940000 task=ced36f20 task.ti=ce940000) > [ 105.336600] Stack: > [ 105.336693] ce941cd0 ce9dc000 00000000 ce941cf8 c12ecd02 c12f43e0 c116c00b cf754158 > [ 105.336982] ce9dc004 cf754284 ce9dc004 cf7ffee8 ceff9978 ce9dc000 cf7ffee8 ce9dc000 > [ 105.337182] ce9dc000 ce941d14 c12e698d cf75412c ce941d98 cf7ffee8 cf7fff20 00000000 > [ 105.337405] Call Trace: > [ 105.337695] [<c12ecd02>] rpcauth_wrap_req+0x75/0x7f > [ 105.337806] [<c12f43e0>] ? xdr_encode_opaque+0x12/0x15 > [ 105.337898] [<c116c00b>] ? nfs3_xdr_enc_setacl3args+0x0/0x98 > [ 105.337988] [<c12e698d>] call_transmit+0x17e/0x1e8 > [ 105.338072] [<c12ec307>] __rpc_execute+0x6d/0x1a6 > [ 105.338155] [<c12ec474>] rpc_execute+0x34/0x37 > [ 105.338235] [<c12e738d>] rpc_run_task+0xb5/0xbd > [ 105.338316] [<c12e7474>] rpc_call_sync+0x3d/0x58 > [ 105.338402] [<c116d0c6>] nfs3_proc_setacls+0x18e/0x24f > [ 105.338493] [<c10b3f76>] ? __kmalloc+0x148/0x1c4 > [ 105.338579] [<c10ecd01>] ? posix_acl_alloc+0x12/0x22 > [ 105.338665] [<c116d5c8>] nfs3_proc_setacl+0xa0/0xca > [ 105.338748] [<c116d69c>] nfs3_setxattr+0x62/0x88 > [ 105.338834] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.338926] [<c116d63a>] ? nfs3_setxattr+0x0/0x88 > [ 105.339026] [<c10cfa79>] __vfs_setxattr_noperm+0x26/0x95 > [ 105.339114] [<c10cfb43>] vfs_setxattr+0x5b/0x76 > [ 105.339211] [<c10cfbfb>] setxattr+0x9d/0xc3 > [ 105.339298] [<c10a2ea8>] ? handle_pte_fault+0x258/0x5cb > [ 105.339428] [<c1091ff6>] ? __free_pages+0x1a/0x23 > [ 105.339517] [<c10498ea>] ? up_read+0x16/0x2c > [ 105.339599] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339677] [<c10b8365>] ? fget+0x0/0xa3 > [ 105.339760] [<c1025d23>] ? get_parent_ip+0xb/0x31 > [ 105.339843] [<c1317042>] ? sub_preempt_count+0x7c/0x89 > [ 105.339931] [<c10cfc72>] sys_fsetxattr+0x51/0x79 > [ 105.340014] [<c1002853>] sysenter_do_call+0x12/0x32 > [ 105.340133] Code: 2e 76 18 00 58 31 d2 8b 7f 28 f6 43 04 01 74 03 8b 53 08 6a 00 8b 46 04 6a 01 8b 0b 52 89 fa e8 85 10 f8 ff 83 c4 0c 85 c0 79 04 <0f> 0b eb fe 31 c9 f6 43 04 04 74 03 8b 4b 0c 68 00 10 00 00 8d > [ 105.350321] EIP: [<c116c06c>] nfs3_xdr_enc_setacl3args+0x61/0x98 SS:ESP 0068:ce941cb4 > [ 105.364385] ---[ end trace 01fcfe7f0f7f6e4a ]--- nfs3_xdr_enc_setacl3args() is not properly setting up the target buffer before nfsacl_encode() attempts to encode the ACL. Introduced by commit d9c407b1 "NFS: Introduce new-style XDR encoding functions for NFSv3." Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Nick Piggin reports: > I'm getting use after frees in aio code in NFS > > [ 2703.396766] Call Trace: > [ 2703.396858] [<ffffffff8100b057>] ? native_sched_clock+0x27/0x80 > [ 2703.396959] [<ffffffff8108509e>] ? put_lock_stats+0xe/0x40 > [ 2703.397058] [<ffffffff81088348>] ? lock_release_holdtime+0xa8/0x140 > [ 2703.397159] [<ffffffff8108a2a5>] lock_acquire+0x95/0x1b0 > [ 2703.397260] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397361] [<ffffffff81039701>] ? get_parent_ip+0x11/0x50 > [ 2703.397464] [<ffffffff81612a31>] _raw_spin_lock_irq+0x41/0x80 > [ 2703.397564] [<ffffffff811627db>] ? aio_put_req+0x2b/0x60 > [ 2703.397662] [<ffffffff811627db>] aio_put_req+0x2b/0x60 > [ 2703.397761] [<ffffffff811647fe>] do_io_submit+0x2be/0x7c0 > [ 2703.397895] [<ffffffff81164d0b>] sys_io_submit+0xb/0x10 > [ 2703.397995] [<ffffffff8100307b>] system_call_fastpath+0x16/0x1b > > Adding some tracing, it is due to nfs completing the request then > returning something other than -EIOCBQUEUED, so aio.c > also completes the request. To address this, prevent the NFS direct I/O engine from completing async iocbs when the forward path returns an error without starting any I/O. This fix appears to survive ^C during both "xfstest no. 208" and "fsx -Z." It's likely this bug has existed for a very long while, as we are seeing very similar symptoms in OEL 5. Copying stable. Cc: Stable <stable@kernel.org> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jesper Juhl 提交于
On Mon, 17 Jan 2011, Mi Jinlong wrote: > > > Jesper Juhl: > > strrchr() can return NULL if nothing is found. If this happens we'll > > dereference a NULL pointer in > > fs/nfs/nfs4filelayoutdev.c::decode_and_add_ds(). > > > > I tried to find some other code that guarantees that this can never > > happen but I was unsuccessful. So, unless someone else can point to some > > code that ensures this can never be a problem, I believe this patch is > > needed. > > > > While I was changing this code I also noticed that all the dprintk() > > statements, except one, start with "%s:". The one missing the ":" I added > > it to. > > Maybe another one also should be changed at decode_and_add_ds() at line 243: > > 243 printk("%s Decoded address and port %s\n", __func__, buf); > Missed that one. Thanks. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 1月, 2011 1 次提交
-
-
由 Fred Isaman 提交于
Cleanup of the allocated list entries should not call put_nfs_open_context() on each entry, as the context will always be NULL, causing an oops. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 1月, 2011 28 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Validate cpu early in perf_event_alloc() perf: Find_get_context: fix the per-cpu-counter check perf: Fix contexted inheritance
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Clear irqstack thread_info x86: Make relocatable kernel work with new binutils
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
-
由 Guenter Roeck 提交于
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 Oleg Nesterov 提交于
Starting from perf_event_alloc()->perf_init_event(), the kernel assumes that event->cpu is either -1 or the valid CPU number. Change perf_event_alloc() to validate this argument early. This also means we can remove the similar check in find_get_context(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161032.GC693@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Oleg Nesterov 提交于
If task == NULL, find_get_context() should always check that cpu is correct. Afaics, the bug was introduced by 38a81da2 "perf events: Clean up pid passing", but even before that commit "&& cpu != -1" was not exactly right, -ESRCH from find_task_by_vpid() is not accurate. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Roland McGrath <roland@redhat.com> Cc: gregkh@suse.de Cc: stable@kernel.org LKML-Reference: <20110118161008.GB693@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Aurelien Jarno 提交于
While most users of a physical Malta board are using the serial port as the console, a lot of QEMU users would prefer to interact with a graphical console. Enable the Cirrus FB support in the Malta default configuration to make that possible. Note that the default console will still be the serial port, users have to pass "console=tty0" to the kernel to use the Cirrus FB. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2001/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Aurelien Jarno 提交于
Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the the virtio code there. Used to enable the virtio drivers under QEMU. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2002/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Just do what everyone else is doing by placing __read_mostly things in the .data.read_mostly section. mips_io_port_base can not be read-only (const) and writable (__read_mostly) at the same time. One of them has to go, so I chose to eliminate the __read_mostly. It will still get stuck in a portion of memory that is not adjacent to things that are written, and thus not be on a dirty cache line, for whatever that is worth. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1702/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Add common platform_device and helper code to make the registration of the built-in wireless MAC easier on the Atheros AR9130/AR9132 based boards. Also register the WMAC device on the AR81 board. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org>, Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1962/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1952/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Several boards are using the built-in SPI controller of the AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device and helper code to register it. Additionally, the patch registers the SPI bus on the PB44 board. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1956/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Almost all boards have one or more push buttons connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the buttons on the PB44 board. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1954/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
All supported SoCs have a built-in hardware watchdog driver. This patch registers a platform_device for that to make it usable. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1955/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Almost all boards have one or more LEDs connected to GPIO lines. This patch adds common code to register a platform_device for them. The patch also adds support for the LEDs on the PB44 board. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1953/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1950/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1949/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
This patch implements generic GPIO routines for the built-in GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1948/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Gabor Juhos 提交于
This patch adds initial support for various Atheros SoCs based on the MIPS 24Kc core. The following models are supported at the moment: - AR7130 - AR7141 - AR7161 - AR9130 - AR9132 - AR7240 - AR7241 - AR7242 The current patch contains minimal support only, but the resulting kernel can boot into user-space with using of an initramfs image on various boards which are using these SoCs. Support for more built-in devices and individual boards will be implemented in further patches. Signed-off-by: NGabor Juhos <juhosg@openwrt.org> Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1947/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
In order not to be left behind, we add jump label support for MIPS. Tested on 64-bit big endian (Octeon), and 32-bit little endian (malta/qemu). Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/1923/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
On the off chance that uasm ever warns about overflow, there is no way to know what the offending instruction is. Change the printks to WARNs, so we can get a nice stack trace. It has the added benefit of being much more noticeable than the short single line warning message, so is less likely to be ignored. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1905/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Octeon can use scratch registers in the TLB handlers. Octeon II can use LDX instructions. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1904/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
Needed by Octeon II optimized TLB handlers. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Pachwork: https://patchwork.linux-mips.org/patch/1903/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they are more efficient than an AND followed by an branch and then restoring the clobbered register. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1873/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 David Daney 提交于
these are already defined, but declaring them allow them to be used outside of uasm.c. Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1872/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-