- 20 3月, 2008 40 次提交
-
-
由 Cyrill Gorcunov 提交于
There are possible NULL pointer derefs in case of kzalloc fails so fix them. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes a memory leak in the "testval == 0x67" case spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew Morton 提交于
be less silly while we're there. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Julia Lawall 提交于
In commit e6bafba5, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Armstrong 提交于
If a dma transfer is attempted for either yuv or framebuffer output, a missing sg_init_table() call causes a kernel BUG in scatterlist.h if CONFIG_DEBUG_SG is set. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
There are several parts of saa7134_board_init2() that calls tuner modules. We should first load tuner, otherwise, the commands will fail. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error with VIDEO_VIVI=y, VIDEO_DEV=m reported by Toralf Förster: <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o: In function `vivi_release': vivi.c:(.text+0x322f5): undefined reference to `video_unregister_device' vivi.c:(.text+0x32337): undefined reference to `video_device_release' drivers/built-in.o: In function `vivi_open': vivi.c:(.text+0x32845): undefined reference to `v4l2_type_names' drivers/built-in.o: In function `vivi_init': vivi.c:(.init.text+0x1d20): undefined reference to `video_device_alloc' vivi.c:(.init.text+0x1d48): undefined reference to `video_register_device' drivers/built-in.o:(.rodata+0x1b40): undefined reference to `video_ioctl2'drivers/built-in.o:(.data+0x140c): undefined reference to `video_device_release' <-- snip --> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ian Armstrong 提交于
As the result of a previous change that delayed the loading of the firmware, the driver can sometimes report a bogus error regarding the yuv output filter table not being found in the firmware. This patch moves the filter table check to ensure it's only done after the firmware has been loaded. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Harvey Harrison 提交于
fixes sparse warning: drivers/media/video/bt8xx/bttv-driver.c:3391:3: warning: Initializer entry defined twice drivers/media/video/bt8xx/bttv-driver.c:3392:3: also defined here Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Yuri Funduryan 提交于
This also has some coding style fixes. Signed-off-by: NYuri Funduryan <yurifun@mail.ru> Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Reviewed-by: NHermann Pitton <hermann-pitton@arcor.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Al Viro 提交于
unsigned long != __le32, TYVM, and unsigned char[4] is not guaranteed to be aligned for u32. While we are at it, sanitize sOutDW() a bit - have it take Byte_t * and handle dereferencing internally. NB: sWriteTxPrioByte() is almost certainly buggered on big-endian and is missing cpu_to_le16() on assignments to *WordPtr; I've left it alone for now. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Update some defconfigs [POWERPC] Hide resources on Axon PCIE root complex nodes [POWERPC] Fix cell IOMMU code to cope with empty dma-ranges and non-PCI devices [POWERPC] Fix build failure for tqm8540 and sbc85xx defconfigs [POWERPC] Fix PMU + soft interrupt disable bug [POWERPC] user_regset PTRACE_SETREGS regression fix
-
由 Jaya Kumar 提交于
Implement support for the E-Ink Metronome controller. It provides an mmapable interface to the controller using defio support. It was tested with a gumstix pxa255 with Vizplex media using Xfbdev and various X clients such as xeyes, xpdf, xloadimage. This patch also fixes the following bug: Defio would cause a hang on write access to the framebuffer as the page fault would be called ad-infinitum. It fixes fb_defio by setting the mapping to be used by page_mkclean. Signed-off-by: NJaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Updates to the at91sam9 rtt-as-rtc driver: - Bugfix: IRQ enable bits need shifting before masking with status - Platform code to initialize wakeup bits didn't get merged; cope Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Justin Waters <justin.waters@timesys.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Revert commit 1ada5cba ("clocksource: make clocksource watchdog cycle through online CPUs") due to the regression reported by Gabriel C at http://lkml.org/lkml/2008/2/24/281 (short vesion: it makes TSC be marked as always unstable on his machine). Cc: Andi Kleen <ak@suse.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Robert Hancock <hancockr@shaw.ca> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Dubov 提交于
Set correct clock management values to improve over-all performance. Signed-off-by: NAlex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Dubov 提交于
Newer MemoryStick (HG) cards and hosts support 8-bit parallel mode of operation in addition to original 4-bit and 1-bit modes. Signed-off-by: NAlex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Dubov 提交于
MemoryStick storage cards, when in parallel mode, send several meaningful bits of their "INT" register as part of command response. This data is stored by host and can be used to spare invocation of "GET_INT" TPC on each data page transferred between host and card. Signed-off-by: NAlex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
fs/ufs/balloc.c: In function `ufs_change_blocknr': fs/ufs/balloc.c:317: warning: long long unsigned int format, long unsigned int arg (arg 2) fs/ufs/balloc.c:317: warning: long long unsigned int format, long unsigned int arg (arg 3) sector_t is u64 and we don't know what type the architecture uses to implement u64. Cc: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
gcc-3.4.5 on sparc64: drivers/md/raid5.c: In function `raid5_end_read_request': drivers/md/raid5.c:1147: warning: long long unsigned int format, long unsigned int arg (arg 4) drivers/md/raid5.c:1164: warning: long long unsigned int format, long unsigned int arg (arg 3) drivers/md/raid5.c:1170: warning: long long unsigned int format, long unsigned int arg (arg 3) sector_t is u64, and we don't know what type the architecture uses to implement u64 (on some it is unsigned long). Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
drivers/memstick/host/jmb38x_ms.c: In function 'jmb38x_ms_transfer_data': drivers/memstick/host/jmb38x_ms.c:294: warning: 'p_off' may be used uninitialized in this function Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
sparc32: drivers/memstick/host/jmb38x_ms.c: In function 'jmb38x_ms_probe': drivers/memstick/host/jmb38x_ms.c:818: error: 'DMA_32BIT_MASK' undeclared (first use in this function) drivers/memstick/host/jmb38x_ms.c:818: error: (Each undeclared identifier is reported only once drivers/memstick/host/jmb38x_ms.c:818: error: for each function it appears in.) Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc notation in mm/readahead.c. Change ":" to ";" so that it doesn't get treated as a doc section heading. Move the comment block ending "*/" to a line by itself so that the text on that last line is not lost (dropped). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Young 提交于
A read request outside i_size will be handled in do_generic_file_read(). So we just return 0 to avoid getting -EIO as normal reading, let do_generic_file_read do the rest. At the same time we need unlock the page to avoid system stuck. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10227Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Acked-by: NJan Kara <jack@suse.cz> Report-by: NChristian Perle <chris@linuxinfotag.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc notation warnings in fs/. Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line: * mark_files_ro Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line: * lease_get_mtime Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line: * lookup_one_len: filesystem helper to lookup single pathname component Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line: * bh_uptodate_or_lock: Test whether the buffer is uptodate Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line: * bh_submit_read: Submit a locked buffer for reading Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line: * writeback_acquire: attempt to get exclusive writeback access to a device Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line: * writeback_in_progress: determine whether there is writeback in progress Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line: * writeback_release: relinquish exclusive writeback access against a device. Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line: * void journal_invalidatepage() Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Halcrow 提交于
ecryptfs_d_release() is doing a mntput before doing the dput. This patch moves the dput before the mntput. Thanks to Rajouri Jammu for reporting this. Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com> Cc: Rajouri Jammu <rajouri.jammu@gmail.com> Cc: Eric Sandeen <sandeen@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul E. McKenney 提交于
In the process of writing up the mechanical proof of correctness for the dynticks/preemptable-RCU interface, I noticed misplaced memory barriers in rcu_enter_nohz() and rcu_exit_nohz(). This patch puts them in the right place and adds a comment. The key thing to keep in mind is that rcu_enter_nohz() is -exiting- the mode that can legally execute RCU read-side critical sections. The memory barrier must be between any potential RCU read-side critical sections and the increment of the per-CPU dynticks_progress_counter, and thus must come -before- this increment. And vice versa for rcu_exit_nohz(). The locking in the scheduler is probably saving us for the moment. Also, switch to smp_mb() - we don't need a barrier for uniprocessor kernels. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NSteven Rostedt <srostedt@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Bauer 提交于
Since 4c7ffe0b ("fbdev: prevent drivers that have hardware cursors from calling software cursor code") every call of i810fb_cursor fails with -ENXIO because of a incorrect "!". This hasn't struck until eaa0ff15 ("fix ! versus & precedence in various places") surrounded the expression with braces, so that the intended behavior was inverted. That caused 'pixel waste' - the same line of multi-colored pixels repeated over the whole screen - during console switch. This switches back to the original pre-4c7ffe0b behavior. Signed-off-by: NStefan Bauer <stefan.bauer@cs.tu-chemnitz.de> Tested-by: NStefan Bauer <stefan.bauer@cs.tu-chemnitz.de> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Antonino Daplas <adaplas@pol.net> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Duane Griffin 提交于
Fix a long-standing typo (predating git) that will cause data corruption if a journal data block needs unescaping. At the moment the wrong buffer head's data is being unescaped. To test this case mount a filesystem with data=journal, start creating and deleting a bunch of files containing only JBD2_MAGIC_NUMBER (0xc03b3998), then pull the plug on the device. Without this patch the files will contain zeros instead of the correct data after recovery. Signed-off-by: NDuane Griffin <duaneg@dghda.com> Acked-by: NJan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Duane Griffin 提交于
Fix a long-standing typo (predating git) that will cause data corruption if a journal data block needs unescaping. At the moment the wrong buffer head's data is being unescaped. To test this case mount a filesystem with data=journal, start creating and deleting a bunch of files containing only JFS_MAGIC_NUMBER (0xc03b3998), then pull the plug on the device. Without this patch the files will contain zeros instead of the correct data after recovery. Signed-off-by: NDuane Griffin <duaneg@dghda.com> Acked-by: NJan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alessandro Zummo 提交于
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ahmed S. Darwish 提交于
In the SYSV ipc msgctl(),semctl(),shmctl() family, if the user passed *_INFO as the desired operation, no specific object is meant to be controlled and only system-wide information is returned. This leads to a NULL IPC object in the LSM hooks if the _INFO flag is given. Avoid dereferencing this NULL pointer in Smack ipc *ctl() methods. Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Acked-by: NCasey Schaufler <casey@schaufler-ca.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Fix up an error in iget removal in which romfs_lookup() making a successful call to romfs_iget() continues through the negative/error handling (previously the successful case jumped around the negative/error handling case): (1) inode is initialised to NULL at the top of the function, eliminating the need for specific negative-inode handling. This means the positive success handling now flows straight through. (2) Rename the labels to be clearer about what they mean. Also make romfs_lookup()'s result variable of type long so as to avoid 32-bit/64-bit conversions with PTR_ERR() and friends. Based upon a report and patch from Adam Richter. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: N"Adam J. Richter" <adam@yggdrasil.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef Bacik 提交于
There are several places where we make allocations with GFP_KERNEL while under a transaction, which could lead to an assertion panic or lockup if under memory pressure. This patch switches these problem areas to use GFP_NOFS to keep these problems from happening. Signed-off-by: NJosef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
ibmpex's temperature sensors report incorrect units. Apply a conversion factor so that tempertures report correctly. Until now, no systems seemed to report temperatures this way, but evidently QS2x blades do. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
Enhanced the list of supported machines. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
The QS2x blades ships with v2.54 of the firmware, which use the same multiplier for all power meters. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
We should always put inode we have reference to, even if quota was reenabled in the mean time. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Emelyanov 提交于
The check t->pid == t->pid is not the blessed way to check whether a task is a group leader. This is not about the code beautifulness only, but about pid namespaces fixes - both the tgid and the pid fields on the task_struct are (slowly :( ) becoming deprecated. Besides, the thread_group_leader() macro makes only one dereference :) Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-