This patch implements RX/TX timestamping support.

The Marvell PTP hardware supports RX timestamping individual message
types, but for simplicity we only support the EVENT receive filter since
few if any clients bother with the more specific filter types.

checkpatch and reverse Christmas tree changes by Andrew Lunn.

Re-factor duplicated code paths and avoid IfOk anti-pattern, use the
common ptp worker thread from the class layer and time stamp UDP/IPv4
frames as well as Layer-2 frame by Richard Cochran.
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Forward the rx/tx timestamp machinery from the dsa infrastructure to the
switch driver.

On the rx side, defer delivery of skbs until we have an rx timestamp.
This mimicks the behavior of skb_defer_rx_timestamp.

On the tx side, identify PTP packets, clone them, and pass them to the
underlying switch driver before we transmit. This mimicks the behavior
of skb_tx_timestamp.

Adjusted txstamp API to keep the allocation and freeing of the clone
in the same central function by Richard Cochran
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support to the dsa slave network device so that
switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the
ethtool timestamp-info interface.
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for configuring mv88e6xxx GPIO lines as PTP
pins, so that they may be used for time stamping external events or for
periodic output.

Checkpatch and reverse Christmas tree fixes by Andrew Lunn

Periodic output removed by Richard Cochran, until a better abstraction
of a VCO is added to Linux in general.
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MV88E6352 and later switches support GPIO control through the "Scratch
& Misc" global2 register. (Older switches do too, though with a slightly
different register interface. Only the 6352-style is implemented here.)

Add a new file, global2_scratch.c, for operations in the Scratch & Misc
space. Additionally, add a GPIO operations structure to present an
abstract view over GPIO manipulation.

Reverse Christmas tree and unsigned has been replaced with unsigned
int by Andrew Lunn.
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds basic support for exposing the 32-bit timestamp counter
inside the mv88e6xxx switch as a ptp_clock.

Adjfine implemented by Richard Cochran.
Andrew Lunn: fix return value of PTP stub function.
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements support for accessing the Precision Time Protocol
and Time Application Interface registers via the AVB register interface
in the Global 2 register.

The register interface differs slightly between different models; older
models use a 3-bit operations field, while newer models use a 2-bit
field. The operations values and the special "global port" values are
different between the two. This is a similar split to the differences
in the "Ingress Rate" register between models, so, like in that case,
we call the two variants "6352" and "6390" and create an ops structure
to abstract between the two.

checkpatch fixups by Andrew Lunn
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let the mv88e6xxx_g2_* register accessor functions be accessible
outside of global2.c.
Signed-off-by: NBrandon Streiff <brandon.streiff@ni.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When NET_PTP_CLASSIFY is disabled, a stub function is required in
order that the drivers compile.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

배석진 reported that in some situations, packets for a given 5-tuple
end up being processed by different CPUS.

This involves RPS, and fragmentation.

배석진 is seeing packet drops when a SYN_RECV request socket is
moved into ESTABLISH state. Other states are protected by socket lock.

This is caused by a CPU losing the race, and simply not caring enough.

Since this seems to occur frequently, we can do better and perform
a second lookup.

Note that all needed memory barriers are already in the existing code,
thanks to the spin_lock()/spin_unlock() pair in inet_ehash_insert()
and reqsk_put(). The second lookup must find the new socket,
unless it has already been accepted and closed by another cpu.

Note that the fragmentation could be avoided in the first place by
use of a correct TCP MSS option in the SYN{ACK} packet, but this
does not mean we can not be more robust.

Many thanks to 배석진 for a very detailed analysis.
Reported-by: N배석진 <soukjin.bae@samsung.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: dev: Make protocol ptr dependent on CONFIG

Found these in a branch from 3-years ago. Still relevant today.
Make decnet, ax25, and atalk ptrs in net_device based on their
respective CONFIG.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-02-13

This series contains updates to i40e and i40evf.

Wei Yongjun fixes a function that needed to be "static".  Also fixes the
use of GFP_KERNEL to GFP_ATOMIC when we have taken a spinlock.

Mitch cleans up several info messages to not include the memory
addresses being used on the off chance this information could be used
maliciously.

Alan provides several fixes to the broadcast filters starting with the
triggering of overflow promiscuous in circumstances where we run out of
space for broadcast filters to prevent traffic from being unexpectedly
dropped.  Refactored the code to improve the readability and
maintainability when we are concerned about when and how overflow
promiscuous is changed.

Harshitha cleans up a message to make it more clear on what is being
reset, so users are not confused and think the PF is resetting.

Dave fixes an issue where the MAC, firmware version and NPAR checks used
to determine if shutting off the firmware LLDP engine is supported or
not, instead set a hardware flag which ethtool can use.

Jake updates the VF driver to use __dev_uc_sync and __dev_mc_sync, like
the PF driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add test cases verifying FIB onlink commands work as expected in
various conditions - IPv4, IPv6, main table, and VRF.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the PF resets the VF, the VF puts out a warning message
indicating that the VF received a reset message from the PF.
Make this message more clear so that we do not mistakenly
think that the PF is undergoing a reset.
Signed-off-by: NHarshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Similar to changes done to the PF driver in commit 6622f5cd ("i40e:
make use of __dev_uc_sync and __dev_mc_sync"), replace our
home-rolled method for updating the internal status of MAC filters with
__dev_uc_sync and __dev_mc_sync.

These new functions use internal state within the netdev struct in order
to efficiently break the question of "which filters in this list need to
be added or removed" into singular "add this filter" and "delete this
filter" requests.

This vastly improves our handling of .set_rx_mode especially with large
number of MAC filters being added to the device, and even results in
a simpler .set_rx_mode handler.

Under some circumstances, such as when attached to a bridge, we may
receive a request to delete our own permanent address. Prevent deletion
of this address during i40evf_addr_unsync so that we don't accidentally
stop receiving traffic.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The MAC, FW Version and NPAR check used to determine
if shutting off the FW LLDP engine is supported is not
using the usual feature check mechanism.

This patch fixes the problem by moving the feature check
to i40e_sw_init in order to set a flag in pf->hw_features
that ethtool will use for priv_flags disable operation.
Signed-off-by: NDave Ertman <david.m.ertman@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Broadcast filters can now cause overflow promiscuous to trigger when
adding "too many" VLANs to all the ports of a device and the driver
needs a way to exit overflow promiscuous once triggered.

Currently the driver looks to see if there are "too many" filters and/or
we have any failed filters to determine when it is safe to exit overflow
promiscuous.  If we trigger overflow promiscuous with broadcast filters,
any new filters added will be "auto-failed" until we exit overflow
promiscuous.  Since the user can't manually remove the failed broadcast
filters for VLANs (nor should we expect the user to do such), there is
no way to exit overflow promiscuous without reloading the driver.

The easiest way to do this is to remove the shortcut to "auto-fail"
filters in overflow promiscuous.  If the user removes the VLANs, the
failed filters will be removed and since we're no longer "auto-failing"
new filters, we'll eventually get a good set of filters and exit
overflow promiscuous.

This has the side benefit of making filter state more explicit in that
if a filter says it's failed we know for a fact it failed and not just
assuming it will if we're in overflow promiscuous.  This is nice because
if the user removes some filters and then adds some, even if we're in
overflow promiscuous, the filter might succeed; we were just assuming it
won't because the user hasn't rectified other existing failed filters.
Signed-off-by: NAlan Brady <alan.brady@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This code here is quite complex and easy to screw up.  Let's see if we
can't improve the readability and maintainability a bit.  This refactors
out promisc_changed into two variables 'old_overflow' and 'new_overflow'
which makes it a bit clearer when we're concerned about when and how
overflow promiscuous is changed.  This also makes so that we no longer
need to pass a boolean pointer to i40e_aqc_add_filters.  Instead we can
simply check if we changed the overflow promiscuous flag since the
function start.
Signed-off-by: NAlan Brady <alan.brady@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When iterating through the linked list of VLAN filters, make the
iterator the same type as that of the linked list.
Signed-off-by: NHarshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When adding a bunch of VLANs to all the ports on a device, it's possible
to run out of space for broadcast filters.  The driver should trigger
overflow promiscuous in this circumstance to prevent traffic from being
unexpectedly dropped.
Signed-off-by: NAlan Brady <alan.brady@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Could a Bad Person do Bad Things to a server if they found these
addresses printed in the log? Who knows? But let's not take that risk.

Remove pointers from a bunch of printks. In some cases, I was able to
adjust the message to indicate whether or not the value was null. In
others, I just removed the entire message as there was really no hope of
saving it.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

A spin lock is taken here so we should use GFP_ATOMIC.

Fixes: 504398f0 ("i40evf: use spinlock to protect (mac|vlan)_filter_list")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Fixes the following sparse warning:

drivers/net/ethernet/intel/i40e/i40e_main.c:5440:5: warning:
 symbol 'i40e_get_link_speed' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

David Ahern says:

====================
selftests: fib_tests: simplifications, verbosity and a race

Improve efficiency of fib_tests.sh and make the test result more verbose,
from this summary:
$ fib_tests.sh is failing in a VM:
    $ fib_tests.sh
    Running netdev unregister tests
    PASS: unicast route test
    PASS: multipath route test
    Running netdev down tests
    PASS: unicast route test
    PASS: multipath route test
    Running netdev carrier change tests
    PASS: local route carrier test
    FAIL: unicast route carrier test

where a single entry actually corresponds to many checks to a much more
verbse output that clarifies test cases:
$fib_tests.sh
Single path route carrier test
    ....
    Carrier down
        IPv4 fibmatch                                         [ OK ]
        IPv6 fibmatch                                         [ OK ]
        IPv4 linkdown flag set                                [FAIL]
        IPv6 linkdown flag set                                [FAIL]
    Second address added with carrier down
        IPv4 fibmatch                                         [ OK ]
        IPv6 fibmatch                                         [ OK ]
        IPv4 linkdown flag set                                [FAIL]
        IPv6 linkdown flag set                                [ OK ]

And then fix the race in changing carrier down on dummy device to checking
the corresponding routes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sleep for a second after setting carrier down to allow linkwatch
to propagate the change to the routing stack via netdev_state_change.
As it stands there is a race setting carrier down on the dummy
device and then checking the linkdown flag in the routes.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move setup and teardown of testns and dummy0 to helpers.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fib_tests.sh is failing in a VM:
    $ fib_tests.sh
    Running netdev unregister tests
    PASS: unicast route test
    PASS: multipath route test
    Running netdev down tests
    PASS: unicast route test
    PASS: multipath route test
    Running netdev carrier change tests
    PASS: local route carrier test
    FAIL: unicast route carrier test

The last test corresponds to fib_carrier_unicast_test which 12 places
that could be failing. Be more verbose in the output so a failure is
easier to track down and separate test setup failures with set -e and
set +e pairs.

With the verbose logging it is easier to see which checks are failing:
    $fib_tests.sh
    Single path route carrier test
        ....
        Carrier down
            IPv4 fibmatch                                         [ OK ]
            IPv6 fibmatch                                         [ OK ]
            IPv4 linkdown flag set                                [FAIL]
            IPv6 linkdown flag set                                [FAIL]
        Second address added with carrier down
            IPv4 fibmatch                                         [ OK ]
            IPv6 fibmatch                                         [ OK ]
            IPv4 linkdown flag set                                [FAIL]
            IPv6 linkdown flag set                                [ OK ]
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'ip netns exec testns ip' is more efficiently handled using 'ip -netns';
runs the ip command after switching the namespace and avoids an exec.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not export fib_multipath_hash or fib_select_path; both are only used
by core ipv4 code.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If flow oif is set and it is not an l3mdev, then fib_select_path
can jump to the source address check.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: rename sctp diag file and add file comments for it

This patchset is to remove the sctp_ prefix for sctp diag file,
and also to add the missing file comments for it.

v1->v2:
  split them into two patches as Marcelo suggested.
====================
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to add the missing file comments for sctp diag file.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove 'sctp_' prefix for diag file, to keep consistent with other
files' names.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use NL_SET_ERR_MSG_MOD helper which adds the module name instead
of specifying the prefix each time.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: SPAN cleanups

In patch one of this short series, a misplaced pointer star is moved to
the correct place.

In the second patch, we observe that if SPAN entries carry their
reference count anyway, it's redundant to also carry a "used" flag.

In the third patch, SPAN support code is moved to a separate module.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the upcoming work on SPAN, it makes sense to move the current code
to a module of its own. It already has a well-defined API boundary to
the mirror management (which is used from matchall and ACL code). A
couple more functions need to be exported for the functions that
spectrum.c needs to use for MTU handling and subsystem init/fini.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>