- 27 9月, 2005 11 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
arm maketools needs include/asm-arm in place in the build tree. On normal builds it's always there, of course, but on O= it's created (by generic code) too late - when we get to asm-offset.h. We used to get away with that by accident - creation of include/asm-arm/arch symlink creates include/asm-arm and it happened to go before maketools. However, we did not have such dependency, so that luck didn't last - now maketools is picked first and we are screwed. Both the symlink and maketools are prerequisites of the same target (archprepare). This fix is obvious - make the latter explicitly depend on the former and be done with that. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
We do _not_ need "sparse" in sparse arguments ;-) What we do need is __BIG_ENDIAN__; right now unconditional, when m32r starts using CPU_LITTLE_ENDIAN, we'll need to adjust. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Most of these guys are simply not needed (pulled by other stuff via asm-i386/hardirq.h). One that is not entirely useless is hilarious - arch/i386/oprofile/nmi_timer_int.c includes linux/irq.h... as a way to get linux/errno.h Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vincent Sanders 提交于
Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: NVincent Sanders <vince@arm.linux.org.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Vrabel 提交于
Patch from David Vrabel Signed-off-by: NDavid Vrabel <dvrabel@arcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Anton Altaparmakov 提交于
different types in it but #define the two constants instead. Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
-
- 26 9月, 2005 14 次提交
-
-
由 Russell King 提交于
SA_IRQNOMASK is unused, remove it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Kars de Jong 提交于
- Added a missing TO_NATIVE call to scripts/mod/file2alias.c:do_pcmcia_entry() - Add an alignment attribute to struct pcmcia_device_no to solve an alignment issue seen when cross-compiling on x86 for m68k. Signed-off-by: NKars de Jong <jongk@linux-m68k.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Christian Zoz reported there are multiple NinjaATA devices all sharing the second product ID string, but not the first one. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Add new ID to serial_cs.c; the CIS fimware override is available by the manufacturer at http://www.sierrawireless.com . Remember to name the CIS binary SW_7xx_SER.cis and to put it into /lib/firmware/ Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Komuro 提交于
TCIC depends on ISA. It is used with ISA-bus system only. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
pci_set_power_state is not needed, as we call pci_enable_device() somewhere else. Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted to bus-centric view first. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
In interrupt probing (both ISA and PCI) the bridge control register is used to change interrupt routing to ISA or PCI by changing bit 7. But this bit only controls the routing of card functional interrupts, not the CSC interrupts which are used for interrupt probing. A bad side effect of messing with this register in yenta_probe_irq() is that it can lead to irq storms if a card is inserted and already powered by the BIOS. Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Anton Altaparmakov 提交于
-
由 Anton Altaparmakov 提交于
restart pages in the journal without multi sector transfer protection fixups (i.e. the update sequence array is empty and in fact does not exist). Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
-
由 Anton Altaparmakov 提交于
two error causing it to be CHKB instead of CHKD. Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The VA addresses of the Anubis CPLD registers confoict with the addresses for the ISA space maps used by the rest of the s3c2410 architecture Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 9月, 2005 9 次提交
-
-
由 Harald Welte 提交于
The GRE, SCTP and TCP protocol helpers did not call ip_conntrack_event_cache() when updating ct->status. This patch adds the respective calls. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
* Remove useless comment. * Remove useless assertions. * Remove useless comparison. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amos Waterland 提交于
From: Amos Waterland <apw@us.ibm.com> If CONFIG_PROC_FS is not selected, the compiler emits this warning: net/core/neighbour.c:64: warning: `neigh_stat_seq_fops' defined but not used Which is correct, because neigh_stat_seq_fops is in fact only initialized and used by code that is protected by CONFIG_PROC_FS. So this patch fixes that up. Signed-off-by: NAmos Waterland <apw@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
We have to introduce a separate Kconfig menu entry for the NFQUEUE targets. They cannot "just" depend on nfnetlink_queue, since nfnetlink_queue could be linked into the kernel, whereas iptables can be a module. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Dmitry Torokhov 提交于
The wwitch bitmap was added to input_device_id structure and we should check it when matching handlers and input devices. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 9月, 2005 6 次提交
-
-
由 Russell King 提交于
Add 'volatile' to the __iomem pointers for these functions as per x86. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
ucb1x00-ts declared a couple of one-bit 'int' bitfields. Make them unsigned. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Stephen Hemminger 提交于
This is one of those workarounds sucked over from sk98lin driver. The skge driver needs to detect the Yukon-Lite A0 chip properly, and turn of Rx FIFO Flush. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-