- 19 10月, 2021 1 次提交
-
-
由 Zheyu Ma 提交于
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: NZheyu Ma <zheyuma97@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2021 1 次提交
-
-
由 Christophe JAILLET 提交于
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2021 1 次提交
-
-
由 Arnd Bergmann 提交于
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NJason Gunthorpe <jgg@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 6月, 2021 1 次提交
-
-
由 Toke Høiland-Jørgensen 提交于
The thunderx driver has rcu_read_lock()/rcu_read_unlock() pairs around XDP program invocations. However, the actual lifetime of the objects referred by the XDP program invocation is longer, all the way through to the call to xdp_do_flush(), making the scope of the rcu_read_lock() too small. This turns out to be harmless because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock() misleading. Rather than extend the scope of the rcu_read_lock(), just get rid of it entirely. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep it around. Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/bpf/20210624160609.292325-10-toke@redhat.com
-
- 09 1月, 2021 2 次提交
-
-
由 Lorenzo Bianconi 提交于
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NShay Agroskin <shayagr@amazon.com> Acked-by: NMartin Habets <habetsm.xilinx@gmail.com> Acked-by: NCamelia Groza <camelia.groza@nxp.com> Acked-by: NMarcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.orgSigned-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lorenzo Bianconi 提交于
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: NLorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Reviewed-by: NAlexander Duyck <alexanderduyck@fb.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NShay Agroskin <shayagr@amazon.com> Acked-by: NMartin Habets <habetsm.xilinx@gmail.com> Acked-by: NCamelia Groza <camelia.groza@nxp.com> Acked-by: NMarcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.orgSigned-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 11 10月, 2020 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
Make use of the new struct_size() helper instead of the offsetof() idiom. Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 15 9月, 2020 1 次提交
-
-
由 Allen Pais 提交于
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: NRomain Perier <romain.perier@gmail.com> Signed-off-by: NAllen Pais <apais@linux.microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 8月, 2020 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
-
- 06 8月, 2020 1 次提交
-
-
由 Dean Nelson 提交于
A VF's mailbox mutex is not getting initialized by nicvf_probe() until after it is first used. And such usage is resulting in... [ 28.270927] ------------[ cut here ]------------ [ 28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0 [ 28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod [ 28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1 [ 28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019 [ 28.271078] pstate: 60000005 (nZCv daif -PAN -UAO) [ 28.271086] pc : __mutex_lock+0xdac/0x12f0 [ 28.271092] lr : __mutex_lock+0xdac/0x12f0 [ 28.271097] sp : ffff800d42146fb0 [ 28.271103] x29: ffff800d42146fb0 x28: 0000000000000000 [ 28.271113] x27: ffff800d24361180 x26: dfff200000000000 [ 28.271122] x25: 0000000000000000 x24: 0000000000000002 [ 28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848 [ 28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c [ 28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184 [ 28.271160] x17: 0000000000000000 x16: 0000000000000000 [ 28.271170] x15: ffff800d70790c38 x14: ffff20001597c000 [ 28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779 [ 28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778 [ 28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1 [ 28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000 [ 28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c [ 28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe [ 28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000 [ 28.271246] Call trace: [ 28.271254] __mutex_lock+0xdac/0x12f0 [ 28.271261] mutex_lock_nested+0x3c/0x50 [ 28.271297] nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf] [ 28.271316] nicvf_register_misc_interrupt+0x20c/0x328 [nicvf] [ 28.271334] nicvf_probe+0x508/0xda0 [nicvf] [ 28.271344] local_pci_probe+0xc4/0x180 [ 28.271352] pci_device_probe+0x3ec/0x528 [ 28.271363] driver_probe_device+0x21c/0xb98 [ 28.271371] device_driver_attach+0xe8/0x120 [ 28.271379] __driver_attach+0xe0/0x2a0 [ 28.271386] bus_for_each_dev+0x118/0x190 [ 28.271394] driver_attach+0x48/0x60 [ 28.271401] bus_add_driver+0x328/0x558 [ 28.271409] driver_register+0x148/0x398 [ 28.271416] __pci_register_driver+0x14c/0x1b0 [ 28.271437] nicvf_init_module+0x54/0x10000 [nicvf] [ 28.271447] do_one_initcall+0x18c/0xc18 [ 28.271457] do_init_module+0x18c/0x618 [ 28.271464] load_module+0x2bc0/0x4088 [ 28.271472] __se_sys_finit_module+0x110/0x188 [ 28.271479] __arm64_sys_finit_module+0x70/0xa0 [ 28.271490] el0_svc_handler+0x15c/0x380 [ 28.271496] el0_svc+0x8/0xc [ 28.271502] irq event stamp: 52649 [ 28.271513] hardirqs last enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8 [ 28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0 [ 28.271530] softirqs last enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c [ 28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500 [ 28.271545] ---[ end trace a9b90324c8a0d4ee ]--- This problem is resolved by moving the call to mutex_init() up earlier in nicvf_probe(). Fixes: 609ea65c ("net: thunderx: add mutex to protect mailbox from concurrent calls for same VF") Signed-off-by: NDean Nelson <dnelson@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 8月, 2020 1 次提交
-
-
由 Xin Long 提交于
A dead lock was triggered on thunderx driver: CPU0 CPU1 ---- ---- [01] lock(&(&nic->rx_mode_wq_lock)->rlock); [11] lock(&(&mc->mca_lock)->rlock); [12] lock(&(&nic->rx_mode_wq_lock)->rlock); [02] <Interrupt> lock(&(&mc->mca_lock)->rlock); The path for each is: [01] worker_thread() -> process_one_work() -> nicvf_set_rx_mode_task() [02] mld_ifc_timer_expire() [11] ipv6_add_dev() -> ipv6_dev_mc_inc() -> igmp6_group_added() -> [12] dev_mc_add() -> __dev_set_rx_mode() -> nicvf_set_rx_mode() To fix it, it needs to disable bh on [1], so that the timer on [2] wouldn't be triggered until rx_mode_wq_lock is released. So change to use spin_lock_bh() instead of spin_lock(). Thanks to Paolo for helping with this. v1->v2: - post to netdev. Reported-by: NRafael P. <rparrazo@redhat.com> Tested-by: NDean Nelson <dnelson@redhat.com> Fixes: 469998c8 ("net: thunderx: prevent concurrent data re-writing by nicvf_set_rx_mode") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 7月, 2020 1 次提交
-
-
由 Andrii Nakryiko 提交于
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: NAndrii Nakryiko <andriin@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
-
- 15 5月, 2020 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
To help reviewers these are the defines related to RCV_FRAG_LEN #define DMA_BUFFER_LEN 1536 /* In multiples of 128bytes */ #define RCV_FRAG_LEN (SKB_DATA_ALIGN(DMA_BUFFER_LEN + NET_SKB_PAD) + \ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: Robert Richter <rrichter@marvell.com> Link: https://lore.kernel.org/bpf/158945342402.97035.12649844447148990032.stgit@firesoul
-
- 03 3月, 2020 1 次提交
-
-
由 Geetha sowjanya 提交于
Replace msleep() with usleep_range() as internally it uses hrtimers. This will put a cap on maximum wait time. Signed-off-by: NGeetha sowjanya <gakula@marvell.com> Signed-off-by: NSunil Goutham <sgoutham@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 12月, 2019 1 次提交
-
-
由 Michael S. Tsirkin 提交于
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Acked-by: NHeiner Kallweit <hkallweit1@gmail.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NShannon Nelson <snelson@pensando.io> Reviewed-by: NMartin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2019 1 次提交
-
-
由 Andrii Nakryiko 提交于
Similarly to bpf_map's refcnt/usercnt, convert bpf_prog's refcnt to atomic64 and remove artificial 32k limit. This allows to make bpf_prog's refcounting non-failing, simplifying logic of users of bpf_prog_add/bpf_prog_inc. Validated compilation by running allyesconfig kernel build. Suggested-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAndrii Nakryiko <andriin@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191117172806.2195367-3-andriin@fb.com
-
- 31 5月, 2019 1 次提交
-
-
由 Thomas Gleixner 提交于
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NAllison Randal <allison@lohutok.net> Reviewed-by: NRichard Fontana <rfontana@redhat.com> Reviewed-by: NSteve Winslow <swinslow@gmail.com> Reviewed-by: NAlexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 4月, 2019 2 次提交
-
-
由 Matteo Croce 提交于
The thunderx driver forbids to load an eBPF program if the MTU is too high, but this can be circumvented by loading the eBPF, then raising the MTU. Fix this by limiting the MTU if an eBPF program is already loaded. Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
The thunderx driver splits frames bigger than 1530 bytes to multiple pages, making impossible to run an eBPF program on it. This leads to a maximum MTU of 1508 if QinQ is in use. The thunderx driver forbids to load an eBPF program if the MTU is higher than 1500 bytes. Raise the limit to 1508 so it is possible to use L2 protocols which need some more headroom. Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2019 1 次提交
-
-
由 Lorenzo Bianconi 提交于
When a bpf program is uploaded, the driver computes the number of xdp tx queues resulting in the allocation of additional qsets. Starting from commit '2ecbe4f4 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them")' the driver runs link state polling for each VF resulting in the following NULL pointer dereference: [ 56.169256] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 56.178032] Mem abort info: [ 56.180834] ESR = 0x96000005 [ 56.183877] Exception class = DABT (current EL), IL = 32 bits [ 56.189792] SET = 0, FnV = 0 [ 56.192834] EA = 0, S1PTW = 0 [ 56.195963] Data abort info: [ 56.198831] ISV = 0, ISS = 0x00000005 [ 56.202662] CM = 0, WnR = 0 [ 56.205619] user pgtable: 64k pages, 48-bit VAs, pgdp = 0000000021f0c7a0 [ 56.212315] [0000000000000020] pgd=0000000000000000, pud=0000000000000000 [ 56.219094] Internal error: Oops: 96000005 [#1] SMP [ 56.260459] CPU: 39 PID: 2034 Comm: ip Not tainted 5.1.0-rc3+ #3 [ 56.266452] Hardware name: GIGABYTE R120-T33/MT30-GS1, BIOS T49 02/02/2018 [ 56.273315] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 56.278098] pc : __ll_sc___cmpxchg_case_acq_64+0x4/0x20 [ 56.283312] lr : mutex_lock+0x2c/0x50 [ 56.286962] sp : ffff0000219af1b0 [ 56.290264] x29: ffff0000219af1b0 x28: ffff800f64de49a0 [ 56.295565] x27: 0000000000000000 x26: 0000000000000015 [ 56.300865] x25: 0000000000000000 x24: 0000000000000000 [ 56.306165] x23: 0000000000000000 x22: ffff000011117000 [ 56.311465] x21: ffff800f64dfc080 x20: 0000000000000020 [ 56.316766] x19: 0000000000000020 x18: 0000000000000001 [ 56.322066] x17: 0000000000000000 x16: ffff800f2e077080 [ 56.327367] x15: 0000000000000004 x14: 0000000000000000 [ 56.332667] x13: ffff000010964438 x12: 0000000000000002 [ 56.337967] x11: 0000000000000000 x10: 0000000000000c70 [ 56.343268] x9 : ffff0000219af120 x8 : ffff800f2e077d50 [ 56.348568] x7 : 0000000000000027 x6 : 000000062a9d6a84 [ 56.353869] x5 : 0000000000000000 x4 : ffff800f2e077480 [ 56.359169] x3 : 0000000000000008 x2 : ffff800f2e077080 [ 56.364469] x1 : 0000000000000000 x0 : 0000000000000020 [ 56.369770] Process ip (pid: 2034, stack limit = 0x00000000c862da3a) [ 56.376110] Call trace: [ 56.378546] __ll_sc___cmpxchg_case_acq_64+0x4/0x20 [ 56.383414] drain_workqueue+0x34/0x198 [ 56.387247] nicvf_open+0x48/0x9e8 [nicvf] [ 56.391334] nicvf_open+0x898/0x9e8 [nicvf] [ 56.395507] nicvf_xdp+0x1bc/0x238 [nicvf] [ 56.399595] dev_xdp_install+0x68/0x90 [ 56.403333] dev_change_xdp_fd+0xc8/0x240 [ 56.407333] do_setlink+0x8e0/0xbe8 [ 56.410810] __rtnl_newlink+0x5b8/0x6d8 [ 56.414634] rtnl_newlink+0x54/0x80 [ 56.418112] rtnetlink_rcv_msg+0x22c/0x2f8 [ 56.422199] netlink_rcv_skb+0x60/0x120 [ 56.426023] rtnetlink_rcv+0x28/0x38 [ 56.429587] netlink_unicast+0x1c8/0x258 [ 56.433498] netlink_sendmsg+0x1b4/0x350 [ 56.437410] sock_sendmsg+0x4c/0x68 [ 56.440887] ___sys_sendmsg+0x240/0x280 [ 56.444711] __sys_sendmsg+0x68/0xb0 [ 56.448275] __arm64_sys_sendmsg+0x2c/0x38 [ 56.452361] el0_svc_handler+0x9c/0x128 [ 56.456186] el0_svc+0x8/0xc [ 56.459056] Code: 35ffff91 2a1003e0 d65f03c0 f9800011 (c85ffc10) [ 56.465166] ---[ end trace 4a57fdc27b0a572c ]--- [ 56.469772] Kernel panic - not syncing: Fatal exception Fix it by checking nicvf_rx_mode_wq pointer in nicvf_open and nicvf_stop Fixes: 2ecbe4f4 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them") Fixes: 2c632ad8 ("net: thunderx: move link state polling function to VF") Reported-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Tested-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2019 1 次提交
-
-
由 Kangjie Lu 提交于
In case alloc_ordered_workqueue fails, the fix reports the error and returns -ENOMEM. Signed-off-by: NKangjie Lu <kjlu@umn.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 2月, 2019 6 次提交
-
-
由 Vadim Lomovtsev 提交于
Move the link change polling task to VF side in order to prevent races between VF and PF while sending link change message(s). This commit is to implement link change request to be initiated by VF. Signed-off-by: NVadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadim Lomovtsev 提交于
In some cases it could happen that nicvf_send_msg_to_pf() could be called concurrently for the same NIC VF, and thus re-writing mailbox contents and breaking messaging sequence with PF by re-writing NICVF data. This commit is to implement mutex for NICVF to protect mailbox registers and NICVF messaging control data from concurrent access. Signed-off-by: NVadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadim Lomovtsev 提交于
To communicate to PF each of ThunderX NIC VF uses mailbox which is pair of 64 bit registers available to both VFn and PF. This commit is to change the xcast message structure in order to fit it into 64 bit. Signed-off-by: NVadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadim Lomovtsev 提交于
The rx_set_mode invokes number of messages to be send to PF for receive mode configuration. In case if there any issues we need to stop sending messages and release allocated memory. This commit is to implement check of nicvf_msg_send_to_pf() result. Signed-off-by: NVadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadim Lomovtsev 提交于
At the end of NIC VF initialization VF sends CFG_DONE message to PF without using nicvf_msg_send_to_pf routine. This potentially could re-write data in mailbox. This commit is to implement common way of sending CFG_DONE message by the same way with other configuration messages by using nicvf_send_msg_to_pf() routine. Signed-off-by: NVadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vadim Lomovtsev 提交于
Having one work queue for receive mode configuration ndo_set_rx_mode() call for all VFs results in making each of them wait till the set_rx_mode() call completes for another VF if any of close, set receive mode and change flags calls being already invoked. Potentially this could cause device state change before appropriate call of receive mode configuration completes, so the call itself became meaningless, corrupt data or break configuration sequence. We don't need any delays in NIC VF configuration sequence so having delayed work call with 0 delay has no sense. This commit is to implement one work queue for each NIC VF for set_rx_mode task and to let them work independently and replacing delayed_work with work_struct. Signed-off-by: NVadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 11月, 2018 1 次提交
-
-
由 Lorenzo Bianconi 提交于
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2018 1 次提交
-
-
由 Jakub Kicinski 提交于
prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 13 6月, 2018 1 次提交
-
-
由 Vadim Lomovtsev 提交于
For each network interface linux network stack issue ndo_set_rx_mode call in order to configure MAC address filters (e.g. for multicast filtering). Currently ThunderX NICVF driver has only one ordered workqueue to process such requests for all VFs. And because of that it is possible that subsequent call to ndo_set_rx_mode would corrupt data which is currently in use by nicvf_set_rx_mode_task. Which in turn could cause following issue: [...] [ 48.978341] Unable to handle kernel paging request at virtual address 1fffff0000000000 [ 48.986275] Mem abort info: [ 48.989058] Exception class = DABT (current EL), IL = 32 bits [ 48.994965] SET = 0, FnV = 0 [ 48.998020] EA = 0, S1PTW = 0 [ 49.001152] Data abort info: [ 49.004022] ISV = 0, ISS = 0x00000004 [ 49.007869] CM = 0, WnR = 0 [ 49.010826] [1fffff0000000000] address between user and kernel address ranges [ 49.017963] Internal error: Oops: 96000004 [#1] SMP [...] [ 49.072138] task: ffff800fdd675400 task.stack: ffff000026440000 [ 49.078051] PC is at prefetch_freepointer.isra.37+0x28/0x3c [ 49.083613] LR is at kmem_cache_alloc_trace+0xc8/0x1fc [...] [ 49.272684] [<ffff0000082738f0>] prefetch_freepointer.isra.37+0x28/0x3c [ 49.279286] [<ffff000008276bc8>] kmem_cache_alloc_trace+0xc8/0x1fc [ 49.285455] [<ffff0000082c0c0c>] alloc_fdtable+0x78/0x134 [ 49.290841] [<ffff0000082c15c0>] dup_fd+0x254/0x2f4 [ 49.295709] [<ffff0000080d1954>] copy_process.isra.38.part.39+0x64c/0x1168 [ 49.302572] [<ffff0000080d264c>] _do_fork+0xfc/0x3b0 [ 49.307524] [<ffff0000080d29e8>] SyS_clone+0x44/0x50 [...] This patch is to prevent such concurrent data write with spinlock. Reported-by: NDean Nelson <dnelson@redhat.com> Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 4月, 2018 1 次提交
-
-
由 Nikita V. Shirokov 提交于
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as well (only "decrease" of pointer's location is going to be supported). changing of this pointer will change packet's size. for cavium's thunder driver we will just calculate packet's length unconditionally Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 09 4月, 2018 1 次提交
-
-
由 Vadim Lomovtsev 提交于
It is too expensive to pass u64 values via linked list, instead allocate array for them by overall number of mac addresses from netdev. This eventually removes multiple kmalloc() calls, aviod memory fragmentation and allow to put single null check on kmalloc return value in order to prevent a potential null pointer dereference. Addresses-Coverity-ID: 1467429 ("Dereference null return value") Fixes: 37c3347e ("net: thunderx: add ndo_set_rx_mode callback implementation for VF") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2018 1 次提交
-
-
由 Vadim Lomovtsev 提交于
The ndo_set_rx_mode() is called from atomic context which causes messages response timeouts while VF to PF communication via MSIx. To get rid of that we're copy passed mc list, parse flags and queue handling of kernel request to ordered workqueue. Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2018 1 次提交
-
-
由 Joe Perches 提交于
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2018 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
This reverts commit aa136d0c. As I previously[1] pointed out this implementation of XDP_REDIRECT is wrong. XDP_REDIRECT is a facility that must work between different NIC drivers. Another NIC driver can call ndo_xdp_xmit/nicvf_xdp_xmit, but your driver patch assumes payload data (at top of page) will contain a queue index and a DMA addr, this is not true and worse will likely contain garbage. Given you have not fixed this in due time (just reached v4.16-rc1), the only option I see is a revert. [1] http://lkml.kernel.org/r/20171211130902.482513d3@redhat.com Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Christina Jacob <cjacob@caviumnetworks.com> Cc: Aleksey Makarov <aleksey.makarov@cavium.com> Fixes: aa136d0c ("net: thunderx: Add support for xdp redirect") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2018 1 次提交
-
-
由 Vadim Lomovtsev 提交于
It was found that ethtool provides unexisting module name while it queries the specified network device for associated driver information. Then user tries to unload that module by provided module name and fails. This happens because ethtool reads value of DRV_NAME macro, while module name is defined at the driver's Makefile. This patch is to correct Cavium CN88xx Thunder NIC driver names (DRV_NAME macro) 'thunder-nicvf' to 'nicvf' and 'thunder-nic' to 'nicpf', sync bgx and xcv driver names accordingly to their module names. Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2018 1 次提交
-
-
由 Sunil Goutham 提交于
This adds timestamping support for both receive and transmit paths. On the receive side no filters are supported i.e either all pkts will get a timestamp appended infront of the packet or none. On the transmit side HW doesn't support timestamp insertion but only generates a separate CQE with transmitted packet's timestamp. Also HW supports only one packet at a time for timestamping on the transmit side. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@cavium.com> Acked-by: NPhilippe Ombredanne <pombredanne@nexb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 1月, 2018 1 次提交
-
-
由 Jesper Dangaard Brouer 提交于
This driver uses a bool scheme for "enable"/"disable" when setting up different resources. Thus, the hook points for xdp_rxq_info is done in the same function call nicvf_rcv_queue_config(). This is activated through enable/disable via nicvf_config_data_transfer(), which is tied into nicvf_stop()/nicvf_open(). Extending driver packet handler call-path nicvf_rcv_pkt_handler() with a pointer to the given struct rcv_queue, in-order to access the xdp_rxq_info data area (in nicvf_xdp_rx()). V2: Driver have no proper error path for failed XDP RX-queue info reg, as nicvf_rcv_queue_config is a void function. Cc: linux-arm-kernel@lists.infradead.org Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Robert Richter <rric@kernel.org> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 30 11月, 2017 2 次提交
-
-
由 Sunil Goutham 提交于
on T81 there are only 4 cores, hence setting max queue count to 4 would leave nothing for XDP_TX. This patch fixes this by doubling max queue count in above scenarios. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: Ncjacob <cjacob@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
This patch adds support for XDP_REDIRECT. Flush is not yet supported. Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: Ncjacob <cjacob@caviumnetworks.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-